| /* |
| * ARM64 Specific Low-Level ACPI Boot Support |
| * |
| * Copyright (C) 2013-2014, Linaro Ltd. |
| * Author: Al Stone <al.stone@linaro.org> |
| * Author: Graeme Gregory <graeme.gregory@linaro.org> |
| * Author: Hanjun Guo <hanjun.guo@linaro.org> |
| * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org> |
| * Author: Naresh Bhat <naresh.bhat@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) "ACPI: " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/bootmem.h> |
| #include <linux/cpumask.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/memblock.h> |
| #include <linux/of_fdt.h> |
| #include <linux/smp.h> |
| |
| #include <asm/cputype.h> |
| #include <asm/cpu_ops.h> |
| #include <asm/smp_plat.h> |
| |
| #ifdef CONFIG_ACPI_APEI |
| # include <linux/efi.h> |
| # include <asm/pgtable.h> |
| #endif |
| |
| int acpi_noirq = 1; /* skip ACPI IRQ initialization */ |
| int acpi_disabled = 1; |
| EXPORT_SYMBOL(acpi_disabled); |
| |
| int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ |
| EXPORT_SYMBOL(acpi_pci_disabled); |
| |
| static bool param_acpi_off __initdata; |
| static bool param_acpi_force __initdata; |
| |
| static int __init parse_acpi(char *arg) |
| { |
| if (!arg) |
| return -EINVAL; |
| |
| /* "acpi=off" disables both ACPI table parsing and interpreter */ |
| if (strcmp(arg, "off") == 0) |
| param_acpi_off = true; |
| else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ |
| param_acpi_force = true; |
| else |
| return -EINVAL; /* Core will print when we return error */ |
| |
| return 0; |
| } |
| early_param("acpi", parse_acpi); |
| |
| static int __init dt_scan_depth1_nodes(unsigned long node, |
| const char *uname, int depth, |
| void *data) |
| { |
| /* |
| * Return 1 as soon as we encounter a node at depth 1 that is |
| * not the /chosen node. |
| */ |
| if (depth == 1 && (strcmp(uname, "chosen") != 0)) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * __acpi_map_table() will be called before page_init(), so early_ioremap() |
| * or early_memremap() should be called here to for ACPI table mapping. |
| */ |
| char *__init __acpi_map_table(unsigned long phys, unsigned long size) |
| { |
| if (!size) |
| return NULL; |
| |
| return early_memremap(phys, size); |
| } |
| |
| void __init __acpi_unmap_table(char *map, unsigned long size) |
| { |
| if (!map || !size) |
| return; |
| |
| early_memunmap(map, size); |
| } |
| |
| bool __init acpi_psci_present(void) |
| { |
| return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT; |
| } |
| |
| /* Whether HVC must be used instead of SMC as the PSCI conduit */ |
| bool __init acpi_psci_use_hvc(void) |
| { |
| return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC; |
| } |
| |
| /* |
| * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity |
| * checks on it |
| * |
| * Return 0 on success, <0 on failure |
| */ |
| static int __init acpi_fadt_sanity_check(void) |
| { |
| struct acpi_table_header *table; |
| struct acpi_table_fadt *fadt; |
| acpi_status status; |
| acpi_size tbl_size; |
| int ret = 0; |
| |
| /* |
| * FADT is required on arm64; retrieve it to check its presence |
| * and carry out revision and ACPI HW reduced compliancy tests |
| */ |
| status = acpi_get_table_with_size(ACPI_SIG_FADT, 0, &table, &tbl_size); |
| if (ACPI_FAILURE(status)) { |
| const char *msg = acpi_format_exception(status); |
| |
| pr_err("Failed to get FADT table, %s\n", msg); |
| return -ENODEV; |
| } |
| |
| fadt = (struct acpi_table_fadt *)table; |
| |
| /* |
| * Revision in table header is the FADT Major revision, and there |
| * is a minor revision of FADT which was introduced by ACPI 5.1, |
| * we only deal with ACPI 5.1 or newer revision to get GIC and SMP |
| * boot protocol configuration data. |
| */ |
| if (table->revision < 5 || |
| (table->revision == 5 && fadt->minor_revision < 1)) { |
| pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n", |
| table->revision, fadt->minor_revision); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) { |
| pr_err("FADT not ACPI hardware reduced compliant\n"); |
| ret = -EINVAL; |
| } |
| |
| out: |
| /* |
| * acpi_get_table_with_size() creates FADT table mapping that |
| * should be released after parsing and before resuming boot |
| */ |
| early_acpi_os_unmap_memory(table, tbl_size); |
| return ret; |
| } |
| |
| /* |
| * acpi_boot_table_init() called from setup_arch(), always. |
| * 1. find RSDP and get its address, and then find XSDT |
| * 2. extract all tables and checksums them all |
| * 3. check ACPI FADT revision |
| * 4. check ACPI FADT HW reduced flag |
| * |
| * We can parse ACPI boot-time tables such as MADT after |
| * this function is called. |
| * |
| * On return ACPI is enabled if either: |
| * |
| * - ACPI tables are initialized and sanity checks passed |
| * - acpi=force was passed in the command line and ACPI was not disabled |
| * explicitly through acpi=off command line parameter |
| * |
| * ACPI is disabled on function return otherwise |
| */ |
| void __init acpi_boot_table_init(void) |
| { |
| /* |
| * Enable ACPI instead of device tree unless |
| * - ACPI has been disabled explicitly (acpi=off), or |
| * - the device tree is not empty (it has more than just a /chosen node) |
| * and ACPI has not been force enabled (acpi=force) |
| */ |
| if (param_acpi_off || |
| (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) |
| return; |
| |
| /* |
| * ACPI is disabled at this point. Enable it in order to parse |
| * the ACPI tables and carry out sanity checks |
| */ |
| enable_acpi(); |
| |
| /* |
| * If ACPI tables are initialized and FADT sanity checks passed, |
| * leave ACPI enabled and carry on booting; otherwise disable ACPI |
| * on initialization error. |
| * If acpi=force was passed on the command line it forces ACPI |
| * to be enabled even if its initialization failed. |
| */ |
| if (acpi_table_init() || acpi_fadt_sanity_check()) { |
| pr_err("Failed to init ACPI tables\n"); |
| if (!param_acpi_force) |
| disable_acpi(); |
| } |
| } |
| |
| #ifdef CONFIG_ACPI_APEI |
| pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) |
| { |
| /* |
| * According to "Table 8 Map: EFI memory types to AArch64 memory |
| * types" of UEFI 2.5 section 2.3.6.1, each EFI memory type is |
| * mapped to a corresponding MAIR attribute encoding. |
| * The EFI memory attribute advises all possible capabilities |
| * of a memory region. We use the most efficient capability. |
| */ |
| |
| u64 attr; |
| |
| attr = efi_mem_attributes(addr); |
| if (attr & EFI_MEMORY_WB) |
| return PAGE_KERNEL; |
| if (attr & EFI_MEMORY_WT) |
| return __pgprot(PROT_NORMAL_WT); |
| if (attr & EFI_MEMORY_WC) |
| return __pgprot(PROT_NORMAL_NC); |
| return __pgprot(PROT_DEVICE_nGnRnE); |
| } |
| #endif |