| /* |
| * linux/arch/alpha/kernel/irq_i8259.c |
| * |
| * This is the 'legacy' 8259A Programmable Interrupt Controller, |
| * present in the majority of PC/AT boxes. |
| * |
| * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/cache.h> |
| #include <linux/sched.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/io.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| |
| |
| /* Note mask bit is true for DISABLED irqs. */ |
| static unsigned int cached_irq_mask = 0xffff; |
| static DEFINE_SPINLOCK(i8259_irq_lock); |
| |
| static inline void |
| i8259_update_irq_hw(unsigned int irq, unsigned long mask) |
| { |
| int port = 0x21; |
| if (irq & 8) mask >>= 8; |
| if (irq & 8) port = 0xA1; |
| outb(mask, port); |
| } |
| |
| inline void |
| i8259a_enable_irq(struct irq_data *d) |
| { |
| spin_lock(&i8259_irq_lock); |
| i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq)); |
| spin_unlock(&i8259_irq_lock); |
| } |
| |
| static inline void |
| __i8259a_disable_irq(unsigned int irq) |
| { |
| i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq); |
| } |
| |
| void |
| i8259a_disable_irq(struct irq_data *d) |
| { |
| spin_lock(&i8259_irq_lock); |
| __i8259a_disable_irq(d->irq); |
| spin_unlock(&i8259_irq_lock); |
| } |
| |
| void |
| i8259a_mask_and_ack_irq(struct irq_data *d) |
| { |
| unsigned int irq = d->irq; |
| |
| spin_lock(&i8259_irq_lock); |
| __i8259a_disable_irq(irq); |
| |
| /* Ack the interrupt making it the lowest priority. */ |
| if (irq >= 8) { |
| outb(0xE0 | (irq - 8), 0xa0); /* ack the slave */ |
| irq = 2; |
| } |
| outb(0xE0 | irq, 0x20); /* ack the master */ |
| spin_unlock(&i8259_irq_lock); |
| } |
| |
| struct irq_chip i8259a_irq_type = { |
| .name = "XT-PIC", |
| .irq_unmask = i8259a_enable_irq, |
| .irq_mask = i8259a_disable_irq, |
| .irq_mask_ack = i8259a_mask_and_ack_irq, |
| }; |
| |
| void __init |
| init_i8259a_irqs(void) |
| { |
| static struct irqaction cascade = { |
| .handler = no_action, |
| .name = "cascade", |
| }; |
| |
| long i; |
| |
| outb(0xff, 0x21); /* mask all of 8259A-1 */ |
| outb(0xff, 0xA1); /* mask all of 8259A-2 */ |
| |
| for (i = 0; i < 16; i++) { |
| set_irq_chip_and_handler(i, &i8259a_irq_type, handle_level_irq); |
| } |
| |
| setup_irq(2, &cascade); |
| } |
| |
| |
| #if defined(CONFIG_ALPHA_GENERIC) |
| # define IACK_SC alpha_mv.iack_sc |
| #elif defined(CONFIG_ALPHA_APECS) |
| # define IACK_SC APECS_IACK_SC |
| #elif defined(CONFIG_ALPHA_LCA) |
| # define IACK_SC LCA_IACK_SC |
| #elif defined(CONFIG_ALPHA_CIA) |
| # define IACK_SC CIA_IACK_SC |
| #elif defined(CONFIG_ALPHA_PYXIS) |
| # define IACK_SC PYXIS_IACK_SC |
| #elif defined(CONFIG_ALPHA_TITAN) |
| # define IACK_SC TITAN_IACK_SC |
| #elif defined(CONFIG_ALPHA_TSUNAMI) |
| # define IACK_SC TSUNAMI_IACK_SC |
| #elif defined(CONFIG_ALPHA_IRONGATE) |
| # define IACK_SC IRONGATE_IACK_SC |
| #endif |
| /* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since |
| sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason. */ |
| |
| #if defined(IACK_SC) |
| void |
| isa_device_interrupt(unsigned long vector) |
| { |
| /* |
| * Generate a PCI interrupt acknowledge cycle. The PIC will |
| * respond with the interrupt vector of the highest priority |
| * interrupt that is pending. The PALcode sets up the |
| * interrupts vectors such that irq level L generates vector L. |
| */ |
| int j = *(vuip) IACK_SC; |
| j &= 0xff; |
| handle_irq(j); |
| } |
| #endif |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC) |
| void |
| isa_no_iack_sc_device_interrupt(unsigned long vector) |
| { |
| unsigned long pic; |
| |
| /* |
| * It seems to me that the probability of two or more *device* |
| * interrupts occurring at almost exactly the same time is |
| * pretty low. So why pay the price of checking for |
| * additional interrupts here if the common case can be |
| * handled so much easier? |
| */ |
| /* |
| * The first read of gives you *all* interrupting lines. |
| * Therefore, read the mask register and and out those lines |
| * not enabled. Note that some documentation has 21 and a1 |
| * write only. This is not true. |
| */ |
| pic = inb(0x20) | (inb(0xA0) << 8); /* read isr */ |
| pic &= 0xFFFB; /* mask out cascade & hibits */ |
| |
| while (pic) { |
| int j = ffz(~pic); |
| pic &= pic - 1; |
| handle_irq(j); |
| } |
| } |
| #endif |