| /* |
| * Real Time Clock interface for |
| * - q40 and other m68k machines, |
| * - HP PARISC machines |
| * - PowerPC machines |
| * emulate some RTC irq capabilities in software |
| * |
| * Copyright (C) 1999 Richard Zidlicky |
| * |
| * based on Paul Gortmaker's rtc.c device and |
| * Sam Creasey Generic rtc driver |
| * |
| * This driver allows use of the real time clock (built into |
| * nearly all computers) from user space. It exports the /dev/rtc |
| * interface supporting various ioctl() and also the /proc/dev/rtc |
| * pseudo-file for status information. |
| * |
| * The ioctls can be used to set the interrupt behaviour where |
| * supported. |
| * |
| * The /dev/rtc interface will block on reads until an interrupt |
| * has been received. If a RTC interrupt has already happened, |
| * it will output an unsigned long and then block. The output value |
| * contains the interrupt status in the low byte and the number of |
| * interrupts since the last read in the remaining high bytes. The |
| * /dev/rtc interface can also be used with the select(2) call. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| |
| * 1.01 fix for 2.3.X rz@linux-m68k.org |
| * 1.02 merged with code from genrtc.c rz@linux-m68k.org |
| * 1.03 make it more portable zippel@linux-m68k.org |
| * 1.04 removed useless timer code rz@linux-m68k.org |
| * 1.05 portable RTC_UIE emulation rz@linux-m68k.org |
| * 1.06 set_rtc_time can return an error trini@kernel.crashing.org |
| * 1.07 ported to HP PARISC (hppa) Helge Deller <deller@gmx.de> |
| */ |
| |
| #define RTC_VERSION "1.07" |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/miscdevice.h> |
| #include <linux/fcntl.h> |
| |
| #include <linux/rtc.h> |
| #include <linux/init.h> |
| #include <linux/poll.h> |
| #include <linux/proc_fs.h> |
| #include <linux/workqueue.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/rtc.h> |
| |
| /* |
| * We sponge a minor off of the misc major. No need slurping |
| * up another valuable major dev number for this. If you add |
| * an ioctl, make sure you don't conflict with SPARC's RTC |
| * ioctls. |
| */ |
| |
| static DECLARE_WAIT_QUEUE_HEAD(gen_rtc_wait); |
| |
| /* |
| * Bits in gen_rtc_status. |
| */ |
| |
| #define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ |
| |
| static unsigned char gen_rtc_status; /* bitmapped status byte. */ |
| static unsigned long gen_rtc_irq_data; /* our output to the world */ |
| |
| /* months start at 0 now */ |
| static unsigned char days_in_mo[] = |
| {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; |
| |
| static int irq_active; |
| |
| #ifdef CONFIG_GEN_RTC_X |
| static struct work_struct genrtc_task; |
| static struct timer_list timer_task; |
| |
| static unsigned int oldsecs; |
| static int lostint; |
| static unsigned long tt_exp; |
| |
| static void gen_rtc_timer(unsigned long data); |
| |
| static volatile int stask_active; /* schedule_work */ |
| static volatile int ttask_active; /* timer_task */ |
| static int stop_rtc_timers; /* don't requeue tasks */ |
| static DEFINE_SPINLOCK(gen_rtc_lock); |
| |
| static void gen_rtc_interrupt(unsigned long arg); |
| |
| /* |
| * Routine to poll RTC seconds field for change as often as possible, |
| * after first RTC_UIE use timer to reduce polling |
| */ |
| static void genrtc_troutine(void *data) |
| { |
| unsigned int tmp = get_rtc_ss(); |
| |
| if (stop_rtc_timers) { |
| stask_active = 0; |
| return; |
| } |
| |
| if (oldsecs != tmp){ |
| oldsecs = tmp; |
| |
| timer_task.function = gen_rtc_timer; |
| timer_task.expires = jiffies + HZ - (HZ/10); |
| tt_exp=timer_task.expires; |
| ttask_active=1; |
| stask_active=0; |
| add_timer(&timer_task); |
| |
| gen_rtc_interrupt(0); |
| } else if (schedule_work(&genrtc_task) == 0) |
| stask_active = 0; |
| } |
| |
| static void gen_rtc_timer(unsigned long data) |
| { |
| lostint = get_rtc_ss() - oldsecs ; |
| if (lostint<0) |
| lostint = 60 - lostint; |
| if (time_after(jiffies, tt_exp)) |
| printk(KERN_INFO "genrtc: timer task delayed by %ld jiffies\n", |
| jiffies-tt_exp); |
| ttask_active=0; |
| stask_active=1; |
| if ((schedule_work(&genrtc_task) == 0)) |
| stask_active = 0; |
| } |
| |
| /* |
| * call gen_rtc_interrupt function to signal an RTC_UIE, |
| * arg is unused. |
| * Could be invoked either from a real interrupt handler or |
| * from some routine that periodically (eg 100HZ) monitors |
| * whether RTC_SECS changed |
| */ |
| static void gen_rtc_interrupt(unsigned long arg) |
| { |
| /* We store the status in the low byte and the number of |
| * interrupts received since the last read in the remainder |
| * of rtc_irq_data. */ |
| |
| gen_rtc_irq_data += 0x100; |
| gen_rtc_irq_data &= ~0xff; |
| gen_rtc_irq_data |= RTC_UIE; |
| |
| if (lostint){ |
| printk("genrtc: system delaying clock ticks?\n"); |
| /* increment count so that userspace knows something is wrong */ |
| gen_rtc_irq_data += ((lostint-1)<<8); |
| lostint = 0; |
| } |
| |
| wake_up_interruptible(&gen_rtc_wait); |
| } |
| |
| /* |
| * Now all the various file operations that we export. |
| */ |
| static ssize_t gen_rtc_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long data; |
| ssize_t retval; |
| |
| if (count != sizeof (unsigned int) && count != sizeof (unsigned long)) |
| return -EINVAL; |
| |
| if (file->f_flags & O_NONBLOCK && !gen_rtc_irq_data) |
| return -EAGAIN; |
| |
| add_wait_queue(&gen_rtc_wait, &wait); |
| retval = -ERESTARTSYS; |
| |
| while (1) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| data = xchg(&gen_rtc_irq_data, 0); |
| if (data) |
| break; |
| if (signal_pending(current)) |
| goto out; |
| schedule(); |
| } |
| |
| /* first test allows optimizer to nuke this case for 32-bit machines */ |
| if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) { |
| unsigned int uidata = data; |
| retval = put_user(uidata, (unsigned int __user *)buf) ?: |
| sizeof(unsigned int); |
| } |
| else { |
| retval = put_user(data, (unsigned long __user *)buf) ?: |
| sizeof(unsigned long); |
| } |
| out: |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&gen_rtc_wait, &wait); |
| |
| return retval; |
| } |
| |
| static unsigned int gen_rtc_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| poll_wait(file, &gen_rtc_wait, wait); |
| if (gen_rtc_irq_data != 0) |
| return POLLIN | POLLRDNORM; |
| return 0; |
| } |
| |
| #endif |
| |
| /* |
| * Used to disable/enable interrupts, only RTC_UIE supported |
| * We also clear out any old irq data after an ioctl() that |
| * meddles with the interrupt enable/disable bits. |
| */ |
| |
| static inline void gen_clear_rtc_irq_bit(unsigned char bit) |
| { |
| #ifdef CONFIG_GEN_RTC_X |
| stop_rtc_timers = 1; |
| if (ttask_active){ |
| del_timer_sync(&timer_task); |
| ttask_active = 0; |
| } |
| while (stask_active) |
| schedule(); |
| |
| spin_lock(&gen_rtc_lock); |
| irq_active = 0; |
| spin_unlock(&gen_rtc_lock); |
| #endif |
| } |
| |
| static inline int gen_set_rtc_irq_bit(unsigned char bit) |
| { |
| #ifdef CONFIG_GEN_RTC_X |
| spin_lock(&gen_rtc_lock); |
| if ( !irq_active ) { |
| irq_active = 1; |
| stop_rtc_timers = 0; |
| lostint = 0; |
| INIT_WORK(&genrtc_task, genrtc_troutine, NULL); |
| oldsecs = get_rtc_ss(); |
| init_timer(&timer_task); |
| |
| stask_active = 1; |
| if (schedule_work(&genrtc_task) == 0){ |
| stask_active = 0; |
| } |
| } |
| spin_unlock(&gen_rtc_lock); |
| gen_rtc_irq_data = 0; |
| return 0; |
| #else |
| return -EINVAL; |
| #endif |
| } |
| |
| static int gen_rtc_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct rtc_time wtime; |
| struct rtc_pll_info pll; |
| void __user *argp = (void __user *)arg; |
| |
| switch (cmd) { |
| |
| case RTC_PLL_GET: |
| if (get_rtc_pll(&pll)) |
| return -EINVAL; |
| else |
| return copy_to_user(argp, &pll, sizeof pll) ? -EFAULT : 0; |
| |
| case RTC_PLL_SET: |
| if (!capable(CAP_SYS_TIME)) |
| return -EACCES; |
| if (copy_from_user(&pll, argp, sizeof(pll))) |
| return -EFAULT; |
| return set_rtc_pll(&pll); |
| |
| case RTC_UIE_OFF: /* disable ints from RTC updates. */ |
| gen_clear_rtc_irq_bit(RTC_UIE); |
| return 0; |
| |
| case RTC_UIE_ON: /* enable ints for RTC updates. */ |
| return gen_set_rtc_irq_bit(RTC_UIE); |
| |
| case RTC_RD_TIME: /* Read the time/date from RTC */ |
| /* this doesn't get week-day, who cares */ |
| memset(&wtime, 0, sizeof(wtime)); |
| get_rtc_time(&wtime); |
| |
| return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0; |
| |
| case RTC_SET_TIME: /* Set the RTC */ |
| { |
| int year; |
| unsigned char leap_yr; |
| |
| if (!capable(CAP_SYS_TIME)) |
| return -EACCES; |
| |
| if (copy_from_user(&wtime, argp, sizeof(wtime))) |
| return -EFAULT; |
| |
| year = wtime.tm_year + 1900; |
| leap_yr = ((!(year % 4) && (year % 100)) || |
| !(year % 400)); |
| |
| if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1)) |
| return -EINVAL; |
| |
| if (wtime.tm_mday < 0 || wtime.tm_mday > |
| (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr))) |
| return -EINVAL; |
| |
| if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 || |
| wtime.tm_min < 0 || wtime.tm_min >= 60 || |
| wtime.tm_sec < 0 || wtime.tm_sec >= 60) |
| return -EINVAL; |
| |
| return set_rtc_time(&wtime); |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * We enforce only one user at a time here with the open/close. |
| * Also clear the previous interrupt data on an open, and clean |
| * up things on a close. |
| */ |
| |
| static int gen_rtc_open(struct inode *inode, struct file *file) |
| { |
| if (gen_rtc_status & RTC_IS_OPEN) |
| return -EBUSY; |
| |
| gen_rtc_status |= RTC_IS_OPEN; |
| gen_rtc_irq_data = 0; |
| irq_active = 0; |
| |
| return 0; |
| } |
| |
| static int gen_rtc_release(struct inode *inode, struct file *file) |
| { |
| /* |
| * Turn off all interrupts once the device is no longer |
| * in use and clear the data. |
| */ |
| |
| gen_clear_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE); |
| |
| gen_rtc_status &= ~RTC_IS_OPEN; |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* |
| * Info exported via "/proc/rtc". |
| */ |
| |
| static int gen_rtc_proc_output(char *buf) |
| { |
| char *p; |
| struct rtc_time tm; |
| unsigned int flags; |
| struct rtc_pll_info pll; |
| |
| p = buf; |
| |
| flags = get_rtc_time(&tm); |
| |
| p += sprintf(p, |
| "rtc_time\t: %02d:%02d:%02d\n" |
| "rtc_date\t: %04d-%02d-%02d\n" |
| "rtc_epoch\t: %04u\n", |
| tm.tm_hour, tm.tm_min, tm.tm_sec, |
| tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, 1900); |
| |
| tm.tm_hour = tm.tm_min = tm.tm_sec = 0; |
| |
| p += sprintf(p, "alarm\t\t: "); |
| if (tm.tm_hour <= 24) |
| p += sprintf(p, "%02d:", tm.tm_hour); |
| else |
| p += sprintf(p, "**:"); |
| |
| if (tm.tm_min <= 59) |
| p += sprintf(p, "%02d:", tm.tm_min); |
| else |
| p += sprintf(p, "**:"); |
| |
| if (tm.tm_sec <= 59) |
| p += sprintf(p, "%02d\n", tm.tm_sec); |
| else |
| p += sprintf(p, "**\n"); |
| |
| p += sprintf(p, |
| "DST_enable\t: %s\n" |
| "BCD\t\t: %s\n" |
| "24hr\t\t: %s\n" |
| "square_wave\t: %s\n" |
| "alarm_IRQ\t: %s\n" |
| "update_IRQ\t: %s\n" |
| "periodic_IRQ\t: %s\n" |
| "periodic_freq\t: %ld\n" |
| "batt_status\t: %s\n", |
| (flags & RTC_DST_EN) ? "yes" : "no", |
| (flags & RTC_DM_BINARY) ? "no" : "yes", |
| (flags & RTC_24H) ? "yes" : "no", |
| (flags & RTC_SQWE) ? "yes" : "no", |
| (flags & RTC_AIE) ? "yes" : "no", |
| irq_active ? "yes" : "no", |
| (flags & RTC_PIE) ? "yes" : "no", |
| 0L /* freq */, |
| (flags & RTC_BATT_BAD) ? "bad" : "okay"); |
| if (!get_rtc_pll(&pll)) |
| p += sprintf(p, |
| "PLL adjustment\t: %d\n" |
| "PLL max +ve adjustment\t: %d\n" |
| "PLL max -ve adjustment\t: %d\n" |
| "PLL +ve adjustment factor\t: %d\n" |
| "PLL -ve adjustment factor\t: %d\n" |
| "PLL frequency\t: %ld\n", |
| pll.pll_value, |
| pll.pll_max, |
| pll.pll_min, |
| pll.pll_posmult, |
| pll.pll_negmult, |
| pll.pll_clock); |
| return p - buf; |
| } |
| |
| static int gen_rtc_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| int len = gen_rtc_proc_output (page); |
| if (len <= off+count) *eof = 1; |
| *start = page + off; |
| len -= off; |
| if (len>count) len = count; |
| if (len<0) len = 0; |
| return len; |
| } |
| |
| static int __init gen_rtc_proc_init(void) |
| { |
| struct proc_dir_entry *r; |
| |
| r = create_proc_read_entry("driver/rtc", 0, NULL, gen_rtc_read_proc, NULL); |
| if (!r) |
| return -ENOMEM; |
| return 0; |
| } |
| #else |
| static inline int gen_rtc_proc_init(void) { return 0; } |
| #endif /* CONFIG_PROC_FS */ |
| |
| |
| /* |
| * The various file operations we support. |
| */ |
| |
| static struct file_operations gen_rtc_fops = { |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_GEN_RTC_X |
| .read = gen_rtc_read, |
| .poll = gen_rtc_poll, |
| #endif |
| .ioctl = gen_rtc_ioctl, |
| .open = gen_rtc_open, |
| .release = gen_rtc_release, |
| }; |
| |
| static struct miscdevice rtc_gen_dev = |
| { |
| .minor = RTC_MINOR, |
| .name = "rtc", |
| .fops = &gen_rtc_fops, |
| }; |
| |
| static int __init rtc_generic_init(void) |
| { |
| int retval; |
| |
| printk(KERN_INFO "Generic RTC Driver v%s\n", RTC_VERSION); |
| |
| retval = misc_register(&rtc_gen_dev); |
| if (retval < 0) |
| return retval; |
| |
| retval = gen_rtc_proc_init(); |
| if (retval) { |
| misc_deregister(&rtc_gen_dev); |
| return retval; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit rtc_generic_exit(void) |
| { |
| remove_proc_entry ("driver/rtc", NULL); |
| misc_deregister(&rtc_gen_dev); |
| } |
| |
| |
| module_init(rtc_generic_init); |
| module_exit(rtc_generic_exit); |
| |
| MODULE_AUTHOR("Richard Zidlicky"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(RTC_MINOR); |