| /* |
| * linux/arch/arm/kernel/ecard.c |
| * |
| * Copyright 1995-2001 Russell King |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Find all installed expansion cards, and handle interrupts from them. |
| * |
| * Created from information from Acorns RiscOS3 PRMs |
| * |
| * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether |
| * podule slot. |
| * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work. |
| * 12-Sep-1997 RMK Created new handling of interrupt enables/disables |
| * - cards can now register their own routine to control |
| * interrupts (recommended). |
| * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled |
| * on reset from Linux. (Caused cards not to respond |
| * under RiscOS without hard reset). |
| * 15-Feb-1998 RMK Added DMA support |
| * 12-Sep-1998 RMK Added EASI support |
| * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment. |
| * 17-Apr-1999 RMK Support for EASI Type C cycles. |
| */ |
| #define ECARD_C |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/completion.h> |
| #include <linux/reboot.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/proc_fs.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/mutex.h> |
| |
| #include <asm/dma.h> |
| #include <asm/ecard.h> |
| #include <asm/hardware.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/mach/irq.h> |
| #include <asm/tlbflush.h> |
| |
| #ifndef CONFIG_ARCH_RPC |
| #define HAVE_EXPMASK |
| #endif |
| |
| struct ecard_request { |
| void (*fn)(struct ecard_request *); |
| ecard_t *ec; |
| unsigned int address; |
| unsigned int length; |
| unsigned int use_loader; |
| void *buffer; |
| struct completion *complete; |
| }; |
| |
| struct expcard_blacklist { |
| unsigned short manufacturer; |
| unsigned short product; |
| const char *type; |
| }; |
| |
| static ecard_t *cards; |
| static ecard_t *slot_to_expcard[MAX_ECARDS]; |
| static unsigned int ectcr; |
| #ifdef HAS_EXPMASK |
| static unsigned int have_expmask; |
| #endif |
| |
| /* List of descriptions of cards which don't have an extended |
| * identification, or chunk directories containing a description. |
| */ |
| static struct expcard_blacklist __initdata blacklist[] = { |
| { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } |
| }; |
| |
| asmlinkage extern int |
| ecard_loader_reset(unsigned long base, loader_t loader); |
| asmlinkage extern int |
| ecard_loader_read(int off, unsigned long base, loader_t loader); |
| |
| static inline unsigned short ecard_getu16(unsigned char *v) |
| { |
| return v[0] | v[1] << 8; |
| } |
| |
| static inline signed long ecard_gets24(unsigned char *v) |
| { |
| return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0); |
| } |
| |
| static inline ecard_t *slot_to_ecard(unsigned int slot) |
| { |
| return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL; |
| } |
| |
| /* ===================== Expansion card daemon ======================== */ |
| /* |
| * Since the loader programs on the expansion cards need to be run |
| * in a specific environment, create a separate task with this |
| * environment up, and pass requests to this task as and when we |
| * need to. |
| * |
| * This should allow 99% of loaders to be called from Linux. |
| * |
| * From a security standpoint, we trust the card vendors. This |
| * may be a misplaced trust. |
| */ |
| static void ecard_task_reset(struct ecard_request *req) |
| { |
| struct expansion_card *ec = req->ec; |
| struct resource *res; |
| |
| res = ec->slot_no == 8 |
| ? &ec->resource[ECARD_RES_MEMC] |
| : ec->type == ECARD_EASI |
| ? &ec->resource[ECARD_RES_EASI] |
| : &ec->resource[ECARD_RES_IOCSYNC]; |
| |
| ecard_loader_reset(res->start, ec->loader); |
| } |
| |
| static void ecard_task_readbytes(struct ecard_request *req) |
| { |
| struct expansion_card *ec = req->ec; |
| unsigned char *buf = req->buffer; |
| unsigned int len = req->length; |
| unsigned int off = req->address; |
| |
| if (ec->slot_no == 8) { |
| void __iomem *base = (void __iomem *) |
| ec->resource[ECARD_RES_MEMC].start; |
| |
| /* |
| * The card maintains an index which increments the address |
| * into a 4096-byte page on each access. We need to keep |
| * track of the counter. |
| */ |
| static unsigned int index; |
| unsigned int page; |
| |
| page = (off >> 12) * 4; |
| if (page > 256 * 4) |
| return; |
| |
| off &= 4095; |
| |
| /* |
| * If we are reading offset 0, or our current index is |
| * greater than the offset, reset the hardware index counter. |
| */ |
| if (off == 0 || index > off) { |
| writeb(0, base); |
| index = 0; |
| } |
| |
| /* |
| * Increment the hardware index counter until we get to the |
| * required offset. The read bytes are discarded. |
| */ |
| while (index < off) { |
| readb(base + page); |
| index += 1; |
| } |
| |
| while (len--) { |
| *buf++ = readb(base + page); |
| index += 1; |
| } |
| } else { |
| unsigned long base = (ec->type == ECARD_EASI |
| ? &ec->resource[ECARD_RES_EASI] |
| : &ec->resource[ECARD_RES_IOCSYNC])->start; |
| void __iomem *pbase = (void __iomem *)base; |
| |
| if (!req->use_loader || !ec->loader) { |
| off *= 4; |
| while (len--) { |
| *buf++ = readb(pbase + off); |
| off += 4; |
| } |
| } else { |
| while(len--) { |
| /* |
| * The following is required by some |
| * expansion card loader programs. |
| */ |
| *(unsigned long *)0x108 = 0; |
| *buf++ = ecard_loader_read(off++, base, |
| ec->loader); |
| } |
| } |
| } |
| |
| } |
| |
| static DECLARE_WAIT_QUEUE_HEAD(ecard_wait); |
| static struct ecard_request *ecard_req; |
| static DEFINE_MUTEX(ecard_mutex); |
| |
| /* |
| * Set up the expansion card daemon's page tables. |
| */ |
| static void ecard_init_pgtables(struct mm_struct *mm) |
| { |
| struct vm_area_struct vma; |
| |
| /* We want to set up the page tables for the following mapping: |
| * Virtual Physical |
| * 0x03000000 0x03000000 |
| * 0x03010000 unmapped |
| * 0x03210000 0x03210000 |
| * 0x03400000 unmapped |
| * 0x08000000 0x08000000 |
| * 0x10000000 unmapped |
| * |
| * FIXME: we don't follow this 100% yet. |
| */ |
| pgd_t *src_pgd, *dst_pgd; |
| |
| src_pgd = pgd_offset(mm, (unsigned long)IO_BASE); |
| dst_pgd = pgd_offset(mm, IO_START); |
| |
| memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); |
| |
| src_pgd = pgd_offset(mm, EASI_BASE); |
| dst_pgd = pgd_offset(mm, EASI_START); |
| |
| memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); |
| |
| vma.vm_mm = mm; |
| |
| flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); |
| flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE); |
| } |
| |
| static int ecard_init_mm(void) |
| { |
| struct mm_struct * mm = mm_alloc(); |
| struct mm_struct *active_mm = current->active_mm; |
| |
| if (!mm) |
| return -ENOMEM; |
| |
| current->mm = mm; |
| current->active_mm = mm; |
| activate_mm(active_mm, mm); |
| mmdrop(active_mm); |
| ecard_init_pgtables(mm); |
| return 0; |
| } |
| |
| static int |
| ecard_task(void * unused) |
| { |
| daemonize("kecardd"); |
| |
| /* |
| * Allocate a mm. We're not a lazy-TLB kernel task since we need |
| * to set page table entries where the user space would be. Note |
| * that this also creates the page tables. Failure is not an |
| * option here. |
| */ |
| if (ecard_init_mm()) |
| panic("kecardd: unable to alloc mm\n"); |
| |
| while (1) { |
| struct ecard_request *req; |
| |
| wait_event_interruptible(ecard_wait, ecard_req != NULL); |
| |
| req = xchg(&ecard_req, NULL); |
| if (req != NULL) { |
| req->fn(req); |
| complete(req->complete); |
| } |
| } |
| } |
| |
| /* |
| * Wake the expansion card daemon to action our request. |
| * |
| * FIXME: The test here is not sufficient to detect if the |
| * kcardd is running. |
| */ |
| static void ecard_call(struct ecard_request *req) |
| { |
| DECLARE_COMPLETION(completion); |
| |
| req->complete = &completion; |
| |
| mutex_lock(&ecard_mutex); |
| ecard_req = req; |
| wake_up(&ecard_wait); |
| |
| /* |
| * Now wait for kecardd to run. |
| */ |
| wait_for_completion(&completion); |
| mutex_unlock(&ecard_mutex); |
| } |
| |
| /* ======================= Mid-level card control ===================== */ |
| |
| static void |
| ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld) |
| { |
| struct ecard_request req; |
| |
| req.fn = ecard_task_readbytes; |
| req.ec = ec; |
| req.address = off; |
| req.length = len; |
| req.use_loader = useld; |
| req.buffer = addr; |
| |
| ecard_call(&req); |
| } |
| |
| int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) |
| { |
| struct ex_chunk_dir excd; |
| int index = 16; |
| int useld = 0; |
| |
| if (!ec->cid.cd) |
| return 0; |
| |
| while(1) { |
| ecard_readbytes(&excd, ec, index, 8, useld); |
| index += 8; |
| if (c_id(&excd) == 0) { |
| if (!useld && ec->loader) { |
| useld = 1; |
| index = 0; |
| continue; |
| } |
| return 0; |
| } |
| if (c_id(&excd) == 0xf0) { /* link */ |
| index = c_start(&excd); |
| continue; |
| } |
| if (c_id(&excd) == 0x80) { /* loader */ |
| if (!ec->loader) { |
| ec->loader = (loader_t)kmalloc(c_len(&excd), |
| GFP_KERNEL); |
| if (ec->loader) |
| ecard_readbytes(ec->loader, ec, |
| (int)c_start(&excd), |
| c_len(&excd), useld); |
| else |
| return 0; |
| } |
| continue; |
| } |
| if (c_id(&excd) == id && num-- == 0) |
| break; |
| } |
| |
| if (c_id(&excd) & 0x80) { |
| switch (c_id(&excd) & 0x70) { |
| case 0x70: |
| ecard_readbytes((unsigned char *)excd.d.string, ec, |
| (int)c_start(&excd), c_len(&excd), |
| useld); |
| break; |
| case 0x00: |
| break; |
| } |
| } |
| cd->start_offset = c_start(&excd); |
| memcpy(cd->d.string, excd.d.string, 256); |
| return 1; |
| } |
| |
| /* ======================= Interrupt control ============================ */ |
| |
| static void ecard_def_irq_enable(ecard_t *ec, int irqnr) |
| { |
| #ifdef HAS_EXPMASK |
| if (irqnr < 4 && have_expmask) { |
| have_expmask |= 1 << irqnr; |
| __raw_writeb(have_expmask, EXPMASK_ENABLE); |
| } |
| #endif |
| } |
| |
| static void ecard_def_irq_disable(ecard_t *ec, int irqnr) |
| { |
| #ifdef HAS_EXPMASK |
| if (irqnr < 4 && have_expmask) { |
| have_expmask &= ~(1 << irqnr); |
| __raw_writeb(have_expmask, EXPMASK_ENABLE); |
| } |
| #endif |
| } |
| |
| static int ecard_def_irq_pending(ecard_t *ec) |
| { |
| return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask; |
| } |
| |
| static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr) |
| { |
| panic("ecard_def_fiq_enable called - impossible"); |
| } |
| |
| static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr) |
| { |
| panic("ecard_def_fiq_disable called - impossible"); |
| } |
| |
| static int ecard_def_fiq_pending(ecard_t *ec) |
| { |
| return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask; |
| } |
| |
| static expansioncard_ops_t ecard_default_ops = { |
| ecard_def_irq_enable, |
| ecard_def_irq_disable, |
| ecard_def_irq_pending, |
| ecard_def_fiq_enable, |
| ecard_def_fiq_disable, |
| ecard_def_fiq_pending |
| }; |
| |
| /* |
| * Enable and disable interrupts from expansion cards. |
| * (interrupts are disabled for these functions). |
| * |
| * They are not meant to be called directly, but via enable/disable_irq. |
| */ |
| static void ecard_irq_unmask(unsigned int irqnr) |
| { |
| ecard_t *ec = slot_to_ecard(irqnr - 32); |
| |
| if (ec) { |
| if (!ec->ops) |
| ec->ops = &ecard_default_ops; |
| |
| if (ec->claimed && ec->ops->irqenable) |
| ec->ops->irqenable(ec, irqnr); |
| else |
| printk(KERN_ERR "ecard: rejecting request to " |
| "enable IRQs for %d\n", irqnr); |
| } |
| } |
| |
| static void ecard_irq_mask(unsigned int irqnr) |
| { |
| ecard_t *ec = slot_to_ecard(irqnr - 32); |
| |
| if (ec) { |
| if (!ec->ops) |
| ec->ops = &ecard_default_ops; |
| |
| if (ec->ops && ec->ops->irqdisable) |
| ec->ops->irqdisable(ec, irqnr); |
| } |
| } |
| |
| static struct irqchip ecard_chip = { |
| .ack = ecard_irq_mask, |
| .mask = ecard_irq_mask, |
| .unmask = ecard_irq_unmask, |
| }; |
| |
| void ecard_enablefiq(unsigned int fiqnr) |
| { |
| ecard_t *ec = slot_to_ecard(fiqnr); |
| |
| if (ec) { |
| if (!ec->ops) |
| ec->ops = &ecard_default_ops; |
| |
| if (ec->claimed && ec->ops->fiqenable) |
| ec->ops->fiqenable(ec, fiqnr); |
| else |
| printk(KERN_ERR "ecard: rejecting request to " |
| "enable FIQs for %d\n", fiqnr); |
| } |
| } |
| |
| void ecard_disablefiq(unsigned int fiqnr) |
| { |
| ecard_t *ec = slot_to_ecard(fiqnr); |
| |
| if (ec) { |
| if (!ec->ops) |
| ec->ops = &ecard_default_ops; |
| |
| if (ec->ops->fiqdisable) |
| ec->ops->fiqdisable(ec, fiqnr); |
| } |
| } |
| |
| static void ecard_dump_irq_state(void) |
| { |
| ecard_t *ec; |
| |
| printk("Expansion card IRQ state:\n"); |
| |
| for (ec = cards; ec; ec = ec->next) { |
| if (ec->slot_no == 8) |
| continue; |
| |
| printk(" %d: %sclaimed, ", |
| ec->slot_no, ec->claimed ? "" : "not "); |
| |
| if (ec->ops && ec->ops->irqpending && |
| ec->ops != &ecard_default_ops) |
| printk("irq %spending\n", |
| ec->ops->irqpending(ec) ? "" : "not "); |
| else |
| printk("irqaddr %p, mask = %02X, status = %02X\n", |
| ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); |
| } |
| } |
| |
| static void ecard_check_lockup(struct irqdesc *desc) |
| { |
| static unsigned long last; |
| static int lockup; |
| |
| /* |
| * If the timer interrupt has not run since the last million |
| * unrecognised expansion card interrupts, then there is |
| * something seriously wrong. Disable the expansion card |
| * interrupts so at least we can continue. |
| * |
| * Maybe we ought to start a timer to re-enable them some time |
| * later? |
| */ |
| if (last == jiffies) { |
| lockup += 1; |
| if (lockup > 1000000) { |
| printk(KERN_ERR "\nInterrupt lockup detected - " |
| "disabling all expansion card interrupts\n"); |
| |
| desc->chip->mask(IRQ_EXPANSIONCARD); |
| ecard_dump_irq_state(); |
| } |
| } else |
| lockup = 0; |
| |
| /* |
| * If we did not recognise the source of this interrupt, |
| * warn the user, but don't flood the user with these messages. |
| */ |
| if (!last || time_after(jiffies, last + 5*HZ)) { |
| last = jiffies; |
| printk(KERN_WARNING "Unrecognised interrupt from backplane\n"); |
| ecard_dump_irq_state(); |
| } |
| } |
| |
| static void |
| ecard_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) |
| { |
| ecard_t *ec; |
| int called = 0; |
| |
| desc->chip->mask(irq); |
| for (ec = cards; ec; ec = ec->next) { |
| int pending; |
| |
| if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8) |
| continue; |
| |
| if (ec->ops && ec->ops->irqpending) |
| pending = ec->ops->irqpending(ec); |
| else |
| pending = ecard_default_ops.irqpending(ec); |
| |
| if (pending) { |
| struct irqdesc *d = irq_desc + ec->irq; |
| desc_handle_irq(ec->irq, d, regs); |
| called ++; |
| } |
| } |
| desc->chip->unmask(irq); |
| |
| if (called == 0) |
| ecard_check_lockup(desc); |
| } |
| |
| #ifdef HAS_EXPMASK |
| static unsigned char priority_masks[] = |
| { |
| 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff |
| }; |
| |
| static unsigned char first_set[] = |
| { |
| 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, |
| 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00 |
| }; |
| |
| static void |
| ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) |
| { |
| const unsigned int statusmask = 15; |
| unsigned int status; |
| |
| status = __raw_readb(EXPMASK_STATUS) & statusmask; |
| if (status) { |
| unsigned int slot = first_set[status]; |
| ecard_t *ec = slot_to_ecard(slot); |
| |
| if (ec->claimed) { |
| struct irqdesc *d = irqdesc + ec->irq; |
| /* |
| * this ugly code is so that we can operate a |
| * prioritorising system: |
| * |
| * Card 0 highest priority |
| * Card 1 |
| * Card 2 |
| * Card 3 lowest priority |
| * |
| * Serial cards should go in 0/1, ethernet/scsi in 2/3 |
| * otherwise you will lose serial data at high speeds! |
| */ |
| desc_handle_irq(ec->irq, d, regs); |
| } else { |
| printk(KERN_WARNING "card%d: interrupt from unclaimed " |
| "card???\n", slot); |
| have_expmask &= ~(1 << slot); |
| __raw_writeb(have_expmask, EXPMASK_ENABLE); |
| } |
| } else |
| printk(KERN_WARNING "Wild interrupt from backplane (masks)\n"); |
| } |
| |
| static int __init ecard_probeirqhw(void) |
| { |
| ecard_t *ec; |
| int found; |
| |
| __raw_writeb(0x00, EXPMASK_ENABLE); |
| __raw_writeb(0xff, EXPMASK_STATUS); |
| found = (__raw_readb(EXPMASK_STATUS) & 15) == 0; |
| __raw_writeb(0xff, EXPMASK_ENABLE); |
| |
| if (found) { |
| printk(KERN_DEBUG "Expansion card interrupt " |
| "management hardware found\n"); |
| |
| /* for each card present, set a bit to '1' */ |
| have_expmask = 0x80000000; |
| |
| for (ec = cards; ec; ec = ec->next) |
| have_expmask |= 1 << ec->slot_no; |
| |
| __raw_writeb(have_expmask, EXPMASK_ENABLE); |
| } |
| |
| return found; |
| } |
| #else |
| #define ecard_irqexp_handler NULL |
| #define ecard_probeirqhw() (0) |
| #endif |
| |
| #ifndef IO_EC_MEMC8_BASE |
| #define IO_EC_MEMC8_BASE 0 |
| #endif |
| |
| unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) |
| { |
| unsigned long address = 0; |
| int slot = ec->slot_no; |
| |
| if (ec->slot_no == 8) |
| return IO_EC_MEMC8_BASE; |
| |
| ectcr &= ~(1 << slot); |
| |
| switch (type) { |
| case ECARD_MEMC: |
| if (slot < 4) |
| address = IO_EC_MEMC_BASE + (slot << 12); |
| break; |
| |
| case ECARD_IOC: |
| if (slot < 4) |
| address = IO_EC_IOC_BASE + (slot << 12); |
| #ifdef IO_EC_IOC4_BASE |
| else |
| address = IO_EC_IOC4_BASE + ((slot - 4) << 12); |
| #endif |
| if (address) |
| address += speed << 17; |
| break; |
| |
| #ifdef IO_EC_EASI_BASE |
| case ECARD_EASI: |
| address = IO_EC_EASI_BASE + (slot << 22); |
| if (speed == ECARD_FAST) |
| ectcr |= 1 << slot; |
| break; |
| #endif |
| default: |
| break; |
| } |
| |
| #ifdef IOMD_ECTCR |
| iomd_writeb(ectcr, IOMD_ECTCR); |
| #endif |
| return address; |
| } |
| |
| static int ecard_prints(char *buffer, ecard_t *ec) |
| { |
| char *start = buffer; |
| |
| buffer += sprintf(buffer, " %d: %s ", ec->slot_no, |
| ec->type == ECARD_EASI ? "EASI" : " "); |
| |
| if (ec->cid.id == 0) { |
| struct in_chunk_dir incd; |
| |
| buffer += sprintf(buffer, "[%04X:%04X] ", |
| ec->cid.manufacturer, ec->cid.product); |
| |
| if (!ec->card_desc && ec->cid.cd && |
| ecard_readchunk(&incd, ec, 0xf5, 0)) { |
| ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL); |
| |
| if (ec->card_desc) |
| strcpy((char *)ec->card_desc, incd.d.string); |
| } |
| |
| buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); |
| } else |
| buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id); |
| |
| return buffer - start; |
| } |
| |
| static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count) |
| { |
| ecard_t *ec = cards; |
| off_t at = 0; |
| int len, cnt; |
| |
| cnt = 0; |
| while (ec && count > cnt) { |
| len = ecard_prints(buf, ec); |
| at += len; |
| if (at >= pos) { |
| if (!*start) { |
| *start = buf + (pos - (at - len)); |
| cnt = at - pos; |
| } else |
| cnt += len; |
| buf += len; |
| } |
| ec = ec->next; |
| } |
| return (count > cnt) ? cnt : count; |
| } |
| |
| static struct proc_dir_entry *proc_bus_ecard_dir = NULL; |
| |
| static void ecard_proc_init(void) |
| { |
| proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus); |
| create_proc_info_entry("devices", 0, proc_bus_ecard_dir, |
| get_ecard_dev_info); |
| } |
| |
| #define ec_set_resource(ec,nr,st,sz) \ |
| do { \ |
| (ec)->resource[nr].name = ec->dev.bus_id; \ |
| (ec)->resource[nr].start = st; \ |
| (ec)->resource[nr].end = (st) + (sz) - 1; \ |
| (ec)->resource[nr].flags = IORESOURCE_MEM; \ |
| } while (0) |
| |
| static void __init ecard_free_card(struct expansion_card *ec) |
| { |
| int i; |
| |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) |
| if (ec->resource[i].flags) |
| release_resource(&ec->resource[i]); |
| |
| kfree(ec); |
| } |
| |
| static struct expansion_card *__init ecard_alloc_card(int type, int slot) |
| { |
| struct expansion_card *ec; |
| unsigned long base; |
| int i; |
| |
| ec = kzalloc(sizeof(ecard_t), GFP_KERNEL); |
| if (!ec) { |
| ec = ERR_PTR(-ENOMEM); |
| goto nomem; |
| } |
| |
| ec->slot_no = slot; |
| ec->type = type; |
| ec->irq = NO_IRQ; |
| ec->fiq = NO_IRQ; |
| ec->dma = NO_DMA; |
| ec->ops = &ecard_default_ops; |
| |
| snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot); |
| ec->dev.parent = NULL; |
| ec->dev.bus = &ecard_bus_type; |
| ec->dev.dma_mask = &ec->dma_mask; |
| ec->dma_mask = (u64)0xffffffff; |
| |
| if (slot < 4) { |
| ec_set_resource(ec, ECARD_RES_MEMC, |
| PODSLOT_MEMC_BASE + (slot << 14), |
| PODSLOT_MEMC_SIZE); |
| base = PODSLOT_IOC0_BASE + (slot << 14); |
| } else |
| base = PODSLOT_IOC4_BASE + ((slot - 4) << 14); |
| |
| #ifdef CONFIG_ARCH_RPC |
| if (slot < 8) { |
| ec_set_resource(ec, ECARD_RES_EASI, |
| PODSLOT_EASI_BASE + (slot << 24), |
| PODSLOT_EASI_SIZE); |
| } |
| |
| if (slot == 8) { |
| ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE); |
| } else |
| #endif |
| |
| for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++) |
| ec_set_resource(ec, i + ECARD_RES_IOCSLOW, |
| base + (i << 19), PODSLOT_IOC_SIZE); |
| |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) { |
| if (ec->resource[i].flags && |
| request_resource(&iomem_resource, &ec->resource[i])) { |
| printk(KERN_ERR "%s: resource(s) not available\n", |
| ec->dev.bus_id); |
| ec->resource[i].end -= ec->resource[i].start; |
| ec->resource[i].start = 0; |
| ec->resource[i].flags = 0; |
| } |
| } |
| |
| nomem: |
| return ec; |
| } |
| |
| static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| return sprintf(buf, "%u\n", ec->irq); |
| } |
| |
| static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| return sprintf(buf, "%u\n", ec->dma); |
| } |
| |
| static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| char *str = buf; |
| int i; |
| |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) |
| str += sprintf(str, "%08lx %08lx %08lx\n", |
| ec->resource[i].start, |
| ec->resource[i].end, |
| ec->resource[i].flags); |
| |
| return str - buf; |
| } |
| |
| static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| return sprintf(buf, "%u\n", ec->cid.manufacturer); |
| } |
| |
| static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| return sprintf(buf, "%u\n", ec->cid.product); |
| } |
| |
| static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC"); |
| } |
| |
| static struct device_attribute ecard_dev_attrs[] = { |
| __ATTR(device, S_IRUGO, ecard_show_device, NULL), |
| __ATTR(dma, S_IRUGO, ecard_show_dma, NULL), |
| __ATTR(irq, S_IRUGO, ecard_show_irq, NULL), |
| __ATTR(resource, S_IRUGO, ecard_show_resources, NULL), |
| __ATTR(type, S_IRUGO, ecard_show_type, NULL), |
| __ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL), |
| __ATTR_NULL, |
| }; |
| |
| |
| int ecard_request_resources(struct expansion_card *ec) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) { |
| if (ecard_resource_end(ec, i) && |
| !request_mem_region(ecard_resource_start(ec, i), |
| ecard_resource_len(ec, i), |
| ec->dev.driver->name)) { |
| err = -EBUSY; |
| break; |
| } |
| } |
| |
| if (err) { |
| while (i--) |
| if (ecard_resource_end(ec, i)) |
| release_mem_region(ecard_resource_start(ec, i), |
| ecard_resource_len(ec, i)); |
| } |
| return err; |
| } |
| EXPORT_SYMBOL(ecard_request_resources); |
| |
| void ecard_release_resources(struct expansion_card *ec) |
| { |
| int i; |
| |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) |
| if (ecard_resource_end(ec, i)) |
| release_mem_region(ecard_resource_start(ec, i), |
| ecard_resource_len(ec, i)); |
| } |
| EXPORT_SYMBOL(ecard_release_resources); |
| |
| /* |
| * Probe for an expansion card. |
| * |
| * If bit 1 of the first byte of the card is set, then the |
| * card does not exist. |
| */ |
| static int __init |
| ecard_probe(int slot, card_type_t type) |
| { |
| ecard_t **ecp; |
| ecard_t *ec; |
| struct ex_ecid cid; |
| int i, rc; |
| |
| ec = ecard_alloc_card(type, slot); |
| if (IS_ERR(ec)) { |
| rc = PTR_ERR(ec); |
| goto nomem; |
| } |
| |
| rc = -ENODEV; |
| if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0) |
| goto nodev; |
| |
| cid.r_zero = 1; |
| ecard_readbytes(&cid, ec, 0, 16, 0); |
| if (cid.r_zero) |
| goto nodev; |
| |
| ec->cid.id = cid.r_id; |
| ec->cid.cd = cid.r_cd; |
| ec->cid.is = cid.r_is; |
| ec->cid.w = cid.r_w; |
| ec->cid.manufacturer = ecard_getu16(cid.r_manu); |
| ec->cid.product = ecard_getu16(cid.r_prod); |
| ec->cid.country = cid.r_country; |
| ec->cid.irqmask = cid.r_irqmask; |
| ec->cid.irqoff = ecard_gets24(cid.r_irqoff); |
| ec->cid.fiqmask = cid.r_fiqmask; |
| ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); |
| ec->fiqaddr = |
| ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr); |
| |
| if (ec->cid.is) { |
| ec->irqmask = ec->cid.irqmask; |
| ec->irqaddr += ec->cid.irqoff; |
| ec->fiqmask = ec->cid.fiqmask; |
| ec->fiqaddr += ec->cid.fiqoff; |
| } else { |
| ec->irqmask = 1; |
| ec->fiqmask = 4; |
| } |
| |
| for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++) |
| if (blacklist[i].manufacturer == ec->cid.manufacturer && |
| blacklist[i].product == ec->cid.product) { |
| ec->card_desc = blacklist[i].type; |
| break; |
| } |
| |
| /* |
| * hook the interrupt handlers |
| */ |
| if (slot < 8) { |
| ec->irq = 32 + slot; |
| set_irq_chip(ec->irq, &ecard_chip); |
| set_irq_handler(ec->irq, do_level_IRQ); |
| set_irq_flags(ec->irq, IRQF_VALID); |
| } |
| |
| #ifdef IO_EC_MEMC8_BASE |
| if (slot == 8) |
| ec->irq = 11; |
| #endif |
| #ifdef CONFIG_ARCH_RPC |
| /* On RiscPC, only first two slots have DMA capability */ |
| if (slot < 2) |
| ec->dma = 2 + slot; |
| #endif |
| |
| for (ecp = &cards; *ecp; ecp = &(*ecp)->next); |
| |
| *ecp = ec; |
| slot_to_expcard[slot] = ec; |
| |
| device_register(&ec->dev); |
| |
| return 0; |
| |
| nodev: |
| ecard_free_card(ec); |
| nomem: |
| return rc; |
| } |
| |
| /* |
| * Initialise the expansion card system. |
| * Locate all hardware - interrupt management and |
| * actual cards. |
| */ |
| static int __init ecard_init(void) |
| { |
| int slot, irqhw, ret; |
| |
| ret = kernel_thread(ecard_task, NULL, CLONE_KERNEL); |
| if (ret < 0) { |
| printk(KERN_ERR "Ecard: unable to create kernel thread: %d\n", |
| ret); |
| return ret; |
| } |
| |
| printk("Probing expansion cards\n"); |
| |
| for (slot = 0; slot < 8; slot ++) { |
| if (ecard_probe(slot, ECARD_EASI) == -ENODEV) |
| ecard_probe(slot, ECARD_IOC); |
| } |
| |
| #ifdef IO_EC_MEMC8_BASE |
| ecard_probe(8, ECARD_IOC); |
| #endif |
| |
| irqhw = ecard_probeirqhw(); |
| |
| set_irq_chained_handler(IRQ_EXPANSIONCARD, |
| irqhw ? ecard_irqexp_handler : ecard_irq_handler); |
| |
| ecard_proc_init(); |
| |
| return 0; |
| } |
| |
| subsys_initcall(ecard_init); |
| |
| /* |
| * ECARD "bus" |
| */ |
| static const struct ecard_id * |
| ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec) |
| { |
| int i; |
| |
| for (i = 0; ids[i].manufacturer != 65535; i++) |
| if (ec->cid.manufacturer == ids[i].manufacturer && |
| ec->cid.product == ids[i].product) |
| return ids + i; |
| |
| return NULL; |
| } |
| |
| static int ecard_drv_probe(struct device *dev) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); |
| const struct ecard_id *id; |
| int ret; |
| |
| id = ecard_match_device(drv->id_table, ec); |
| |
| ecard_claim(ec); |
| ret = drv->probe(ec, id); |
| if (ret) |
| ecard_release(ec); |
| return ret; |
| } |
| |
| static int ecard_drv_remove(struct device *dev) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); |
| |
| drv->remove(ec); |
| ecard_release(ec); |
| |
| return 0; |
| } |
| |
| /* |
| * Before rebooting, we must make sure that the expansion card is in a |
| * sensible state, so it can be re-detected. This means that the first |
| * page of the ROM must be visible. We call the expansion cards reset |
| * handler, if any. |
| */ |
| static void ecard_drv_shutdown(struct device *dev) |
| { |
| struct expansion_card *ec = ECARD_DEV(dev); |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); |
| struct ecard_request req; |
| |
| if (dev->driver) { |
| if (drv->shutdown) |
| drv->shutdown(ec); |
| ecard_release(ec); |
| } |
| |
| /* |
| * If this card has a loader, call the reset handler. |
| */ |
| if (ec->loader) { |
| req.fn = ecard_task_reset; |
| req.ec = ec; |
| ecard_call(&req); |
| } |
| } |
| |
| int ecard_register_driver(struct ecard_driver *drv) |
| { |
| drv->drv.bus = &ecard_bus_type; |
| |
| return driver_register(&drv->drv); |
| } |
| |
| void ecard_remove_driver(struct ecard_driver *drv) |
| { |
| driver_unregister(&drv->drv); |
| } |
| |
| static int ecard_match(struct device *_dev, struct device_driver *_drv) |
| { |
| struct expansion_card *ec = ECARD_DEV(_dev); |
| struct ecard_driver *drv = ECARD_DRV(_drv); |
| int ret; |
| |
| if (drv->id_table) { |
| ret = ecard_match_device(drv->id_table, ec) != NULL; |
| } else { |
| ret = ec->cid.id == drv->id; |
| } |
| |
| return ret; |
| } |
| |
| struct bus_type ecard_bus_type = { |
| .name = "ecard", |
| .dev_attrs = ecard_dev_attrs, |
| .match = ecard_match, |
| .probe = ecard_drv_probe, |
| .remove = ecard_drv_remove, |
| .shutdown = ecard_drv_shutdown, |
| }; |
| |
| static int ecard_bus_init(void) |
| { |
| return bus_register(&ecard_bus_type); |
| } |
| |
| postcore_initcall(ecard_bus_init); |
| |
| EXPORT_SYMBOL(ecard_readchunk); |
| EXPORT_SYMBOL(__ecard_address); |
| EXPORT_SYMBOL(ecard_register_driver); |
| EXPORT_SYMBOL(ecard_remove_driver); |
| EXPORT_SYMBOL(ecard_bus_type); |