| /* Driver for USB Mass Storage compliant devices |
| * Unusual Devices File |
| * |
| * Current development and maintenance by: |
| * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) |
| * |
| * Initial work by: |
| * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. |
| * |
| * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more |
| * information about this driver. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* IMPORTANT NOTE: This file must be included in another file which does |
| * the following thing for it to work: |
| * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined |
| * before this file is included. |
| */ |
| |
| /* If you edit this file, please try to keep it sorted first by VendorID, |
| * then by ProductID. |
| * |
| * If you want to add an entry for this file, be sure to include the |
| * following information: |
| * - a patch that adds the entry for your device, including your |
| * email address right above the entry (plus maybe a brief |
| * explanation of the reason for the entry), |
| * - a copy of /proc/bus/usb/devices with your device plugged in |
| * running with this patch. |
| * Send your submission to either Phil Dibowitz <phil@ipom.com> or |
| * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the |
| * USB development list <linux-usb@vger.kernel.org> and the USB storage list |
| * <usb-storage@lists.one-eyed-alien.net> |
| */ |
| |
| /* Note: If you add an entry only in order to set the CAPACITY_OK flag, |
| * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is |
| * because such entries mark devices which actually work correctly, |
| * as opposed to devices that do something strangely or wrongly. |
| */ |
| |
| #if !defined(CONFIG_USB_STORAGE_SDDR09) && \ |
| !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) |
| #define NO_SDDR09 |
| #endif |
| |
| /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> |
| */ |
| UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, |
| "ATMEL", |
| "SND1 Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE), |
| |
| /* Reported by Rodolfo Quesada <rquesada@roqz.net> */ |
| UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, |
| "VIA Technologies Inc.", |
| "Mitsumi multi cardreader", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, |
| "HP", |
| "CD-Writer+", |
| US_SC_8070, US_PR_CB, NULL, 0), |
| |
| /* Reported by Ben Efros <ben@pc-doctor.com> */ |
| UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, |
| "HP", |
| "Personal Media Drive", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SANE_SENSE ), |
| |
| /* Reported by Grant Grundler <grundler@parisc-linux.org> |
| * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware. |
| */ |
| UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, |
| "HP", |
| "PhotoSmart R707", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), |
| |
| /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> |
| * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) |
| * for USB floppies that need the SINGLE_LUN enforcement. |
| */ |
| UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, |
| "NEC", |
| "NEC USB UF000x", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ |
| UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, |
| "VIA Technologies Inc.", |
| "USB 2.0 Card Reader", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au> |
| * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message |
| * always fails and confuses drive. |
| */ |
| UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, |
| "Buffalo", |
| "DUB-P40G HDD", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ |
| UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, |
| "Samsung Info. Systems America, Inc.", |
| "MP3 Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Orgad Shaneh <orgads@gmail.com> */ |
| UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, |
| "Samsung", "MP3 Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Christian Leber <christian@leber.de> */ |
| UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, |
| "TrekStor", |
| "i.Beat 115 2.0", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Stefan Werner <dustbln@gmx.de> */ |
| UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, |
| "TrekStor", |
| "i.Beat Joy 2.0", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */ |
| UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, |
| "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */ |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Andrew Nayenko <relan@bk.ru> |
| * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */ |
| UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, |
| "Nokia", |
| "Nokia 6288", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* Reported by Mario Rettig <mariorettig@web.de> */ |
| UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, |
| "Nokia", |
| "Nokia 3250", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by <honkkis@gmail.com> */ |
| UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, |
| "Nokia", |
| "E70", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Jon Hart <Jon.Hart@web.de> */ |
| UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, |
| "Nokia", |
| "E60", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and |
| * Einar Th. Einarsson <einarthered@gmail.com> */ |
| UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, |
| "Nokia", |
| "N91", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Jiri Slaby <jirislaby@gmail.com> and |
| * Rene C. Castberg <Rene@Castberg.org> */ |
| UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, |
| "Nokia", |
| "N80", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ |
| UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, |
| "Nokia", |
| "E61", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Bardur Arantsson <bardur@scientician.net> */ |
| UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, |
| "Nokia", |
| "6131", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */ |
| UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, |
| "Nokia", |
| "Nokia 6233", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* Reported by Alex Corcoles <alex@corcoles.net> */ |
| UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, |
| "Nokia", |
| "6234", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| #ifdef NO_SDDR09 |
| UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, |
| "Microtech", |
| "CameraMate", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN ), |
| #endif |
| |
| /* Patch submitted by Daniel Drake <dsd@gentoo.org> |
| * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ |
| UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, |
| "Neuros Audio", |
| "USB 2.0 HD 2.5", |
| US_SC_DEVICE, US_PR_BULK, NULL, |
| US_FL_NEED_OVERRIDE ), |
| |
| /* |
| * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. |
| * The key does not actually break, but it returns zero sense which |
| * makes our SCSI stack to print confusing messages. |
| */ |
| UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, |
| "USBest Technology", /* sold by Transcend */ |
| "USB Mass Storage Device", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), |
| |
| /* |
| * Bohdan Linda <bohdan.linda@gmail.com> |
| * 1GB USB sticks MyFlash High Speed. I have restricted |
| * the revision to my model only |
| */ |
| UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, |
| "USB 2.0", |
| "Flash Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> |
| * Obviously the PROM has not been customized by the VAR; |
| * the Vendor and Product string descriptors are: |
| * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) |
| * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) |
| */ |
| UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, |
| "Mitac", |
| "GPS", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* |
| * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) |
| * Reported by Pete Zaitcev <zaitcev@redhat.com> |
| * This device chokes on both version of MODE SENSE which we have, so |
| * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. |
| */ |
| UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, |
| "AMI", |
| "Virtual Floppy", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NO_WP_DETECT), |
| |
| /* Patch submitted by Philipp Friedrich <philipp@void.at> */ |
| UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, |
| "Kyocera", |
| "Finecam S3x", |
| US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), |
| |
| /* Patch submitted by Philipp Friedrich <philipp@void.at> */ |
| UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, |
| "Kyocera", |
| "Finecam S4", |
| US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), |
| |
| /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */ |
| UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, |
| "Kyocera", |
| "Finecam S5", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), |
| |
| /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ |
| UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, |
| "Kyocera", |
| "CONTAX SL300R T*", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), |
| |
| /* Reported by Paul Stewart <stewart@wetlogic.net> |
| * This entry is needed because the device reports Sub=ff */ |
| UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, |
| "Hitachi", |
| "DVD-CAM DZ-MV100A Camcorder", |
| US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN), |
| |
| /* BENQ DC5330 |
| * Reported by Manuel Fombuena <mfombuena@ya.com> and |
| * Frank Copeland <fjc@thingy.apana.org.au> */ |
| UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "300_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Patch for Nikon coolpix 2000 |
| * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/ |
| UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, |
| "NIKON", |
| "NIKON DSC E2000", |
| US_SC_DEVICE, US_PR_DEVICE,NULL, |
| US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Doug Maxey (dwm@austin.ibm.com) */ |
| UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, |
| "IBM", |
| "IBM RSA2", |
| US_SC_DEVICE, US_PR_CB, NULL, |
| US_FL_MAX_SECTORS_MIN), |
| |
| /* Reported by Simon Levitt <simon@whattf.com> |
| * This entry needs Sub and Proto fields */ |
| UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, |
| "Epson", |
| "875DC Storage", |
| US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY), |
| |
| /* Reported by Khalid Aziz <khalid@gonehiking.org> |
| * This entry is needed because the device reports Sub=ff */ |
| UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, |
| "Epson", |
| "785EPX Storage", |
| US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN), |
| |
| /* Not sure who reported this originally but |
| * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN |
| * flag be added */ |
| UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, |
| "Fujifilm", |
| "FinePix 1400Zoom", |
| US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), |
| |
| /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de> |
| * The device needs the flags only. |
| */ |
| UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074, |
| "ScanLogic", |
| "SL11R-IDE", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY), |
| |
| /* Reported by Kriston Fincher <kriston@airmail.net> |
| * Patch submitted by Sean Millichamp <sean@bruenor.org> |
| * This is to support the Panasonic PalmCam PV-SD4090 |
| * This entry is needed because the device reports Sub=ff |
| */ |
| UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, |
| "Panasonic", |
| "LS-120 Camera", |
| US_SC_UFI, US_PR_DEVICE, NULL, 0), |
| |
| /* From Yukihiro Nakai, via zaitcev@yahoo.com. |
| * This is needed for CB instead of CBI */ |
| UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, |
| "Sharp CE-CW05", |
| "CD-R/RW Drive", |
| US_SC_8070, US_PR_CB, NULL, 0), |
| |
| /* Reported by Adriaan Penning <a.penning@luon.net> */ |
| UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, |
| "Panasonic", |
| "DMC-LCx Camera", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */ |
| UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, |
| "LEICA", |
| "D-LUX Camera", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), |
| |
| /* Most of the following entries were developed with the help of |
| * Shuttle/SCM directly. |
| */ |
| UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, |
| "Matshita", |
| "LS-120", |
| US_SC_8020, US_PR_CB, NULL, 0), |
| |
| UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, |
| "Shuttle", |
| "eUSCSI Bridge", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| #ifdef NO_SDDR09 |
| UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, |
| "SCM Microsystems", |
| "eUSB CompactFlash Adapter", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN), |
| #endif |
| |
| /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */ |
| UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, |
| "SCM Microsystems Inc.", |
| "eUSB MMC Adapter", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN), |
| |
| /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */ |
| UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, |
| "Shuttle", |
| "eUSB MMC Adapter", |
| US_SC_SCSI, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN), |
| |
| UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, |
| "Sony", |
| "Hifd", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN), |
| |
| UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, |
| "Shuttle", |
| "eUSB ATA/ATAPI Adapter", |
| US_SC_8020, US_PR_CB, NULL, 0), |
| |
| UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, |
| "Shuttle", |
| "eUSB CompactFlash Adapter", |
| US_SC_8020, US_PR_CB, NULL, 0), |
| |
| UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, |
| "Shuttle", |
| "eUSCSI Bridge", |
| US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, |
| "Shuttle", |
| "eUSCSI Bridge", |
| US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, |
| "Shuttle", |
| "CD-RW Device", |
| US_SC_8020, US_PR_CB, NULL, 0), |
| |
| /* Reported by Dmitry Khlystov <adminimus@gmail.com> */ |
| UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, |
| "Samsung", |
| "YP-U3", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64), |
| |
| /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. |
| * Device uses standards-violating 32-byte Bulk Command Block Wrappers and |
| * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. |
| */ |
| UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, |
| "Kobian Mercury", |
| "Binocam DCB-132", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_BULK32), |
| |
| /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ |
| UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, |
| "Belkin", |
| "USB SCSI Adaptor", |
| US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| /* Iomega Clik! Drive |
| * Reported by David Chatenay <dchatenay@hotmail.com> |
| * The reason this is needed is not fully known. |
| */ |
| UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, |
| "Iomega", |
| "USB Clik! 40", |
| US_SC_8070, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Added by Alan Stern <stern@rowland.harvard.edu> */ |
| COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, |
| "Linux", |
| "File-backed Storage Gadget", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_CAPACITY_OK ), |
| |
| /* Yakumo Mega Image 37 |
| * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ |
| UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "300_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Another Yakumo camera. |
| * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */ |
| UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "300_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */ |
| UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "300_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Yakumo Mega Image 47 |
| * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */ |
| UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "400_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Paul Ortyl <ortylp@3miasto.net> |
| * Note that it's similar to the device above, only different prodID */ |
| UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, |
| "Tekom Technologies, Inc", |
| "400_CAMERA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, |
| "Sony", |
| "DSC-S30/S70/S75/505V/F505/F707/F717/P8", |
| US_SC_SCSI, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), |
| |
| /* Submitted by Lars Jacob <jacob.lars@googlemail.com> |
| * This entry is needed because the device reports Sub=ff */ |
| UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, |
| "Sony", |
| "DSC-T1/T5/H5", |
| US_SC_8070, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| |
| /* Reported by wim@geeks.nl */ |
| UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, |
| "Sony", |
| "Memorystick NW-MS7", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ |
| UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, |
| "Sony", |
| "USB Floppy Drive", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, |
| "Sony", |
| "Memorystick MSAC-US1", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Klaus Mueller <k.mueller@intershop.de> */ |
| UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, |
| "Sony", |
| "Handycam", |
| US_SC_SCSI, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */ |
| UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, |
| "Sony", |
| "Handycam HC-85", |
| US_SC_UFI, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, |
| "Sony", |
| "Memorystick MSC-U01N", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Michal Mlotek <mlotek@foobar.pl> */ |
| UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, |
| "Sony", |
| "PEG N760c Memorystick", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, |
| "Sony", |
| "Memorystick MSC-U03", |
| US_SC_UFI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Nathan Babb <nathan@lexi.com> */ |
| UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, |
| "Sony", |
| "PEG Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */ |
| UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, |
| "Sony", |
| "PEG Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */ |
| UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, |
| "Sony", |
| "PEG Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* floppy reports multiple luns */ |
| UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, |
| "SAMSUNG", |
| "SFD-321U [FW 0C]", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* We keep this entry to force the transport; firmware 3.00 and later is ok. */ |
| UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, |
| "Y-E Data", |
| "Flashbuster-U", |
| US_SC_DEVICE, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN), |
| |
| /* Reported by Johann Cardon <johann.cardon@free.fr> |
| * This entry is needed only because the device reports |
| * bInterfaceClass = 0xff (vendor-specific) |
| */ |
| UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, |
| "Y-E Data", |
| "Silicon Media R/W", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, 0), |
| |
| /* Reported by RTE <raszilki@yandex.ru> */ |
| UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, |
| "JetFlash", |
| "TS1GJF2A/120", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* Fabrizio Fellini <fello@libero.it> */ |
| UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, |
| "Fujifilm", |
| "Digital Camera EX-20 DSC", |
| US_SC_8070, US_PR_DEVICE, NULL, 0 ), |
| |
| /* Reported by Andre Welter <a.r.welter@gmx.de> |
| * This antique device predates the release of the Bulk-only Transport |
| * spec, and if it gets a Get-Max-LUN then it requires the host to do a |
| * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent |
| * us from sending the request. |
| */ |
| UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, |
| "Iomega", |
| "ZIP 100", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Reported by <Hendryk.Pfeiffer@gmx.de> */ |
| UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, |
| "LaCie", |
| "DVD+-RW", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_GO_SLOW ), |
| |
| /* Submitted by Joel Bourquard <numlock@freesurf.ch> |
| * Some versions of this device need the SubClass and Protocol overrides |
| * while others don't. |
| */ |
| UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, |
| "In-System", |
| "PyroGate External CD-ROM Enclosure (FCD-523)", |
| US_SC_SCSI, US_PR_BULK, NULL, |
| US_FL_NEED_OVERRIDE ), |
| |
| /* Submitted by Sven Anderson <sven-linux@anderson.de> |
| * There are at least four ProductIDs used for iPods, so I added 0x1202 and |
| * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears |
| * to change with firmware updates, I changed the range to maximum for all |
| * iPod entries. |
| */ |
| UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, |
| "Apple", |
| "iPod", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Avi Kivity <avi@argo.co.il> */ |
| UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, |
| "Apple", |
| "iPod", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999, |
| "Apple", |
| "iPod", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), |
| |
| UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, |
| "Apple", |
| "iPod", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* |
| * Reported by Tyson Vinson <lornoss@gmail.com> |
| * This particular productId is the iPod Nano |
| */ |
| UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, |
| "Apple", |
| "iPod", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Dan Williams <dcbw@redhat.com> |
| * Option N.V. mobile broadband modems |
| * Ignore driver CD mode and force into modem mode by default. |
| */ |
| |
| /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */ |
| UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, |
| "Option N.V.", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, option_ms_init, |
| 0), |
| |
| /* Reported by Blake Matheny <bmatheny@purdue.edu> */ |
| UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, |
| "Lexar", |
| "USB CF Reader", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* The following two entries are for a Genesys USB to IDE |
| * converter chip, but it changes its ProductId depending |
| * on whether or not a disk or an optical device is enclosed |
| * They were originally reported by Alexander Oltu |
| * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> |
| * respectively. |
| * |
| * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz |
| * <phil@ipom.com> as these flags were made and hard-coded |
| * special-cases were pulled from scsiglue.c. |
| */ |
| UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, |
| "Genesys Logic", |
| "USB to IDE Optical", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), |
| |
| UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, |
| "Genesys Logic", |
| "USB to IDE Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Ben Efros <ben@pc-doctor.com> */ |
| UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, |
| "Genesys Logic", |
| "USB to SATA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SANE_SENSE ), |
| |
| /* Reported by Hanno Boeck <hanno@gmx.de> |
| * Taken from the Lycoris Kernel */ |
| UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, |
| "Vivitar", |
| "Vivicam 35Xx", |
| US_SC_SCSI, US_PR_BULK, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, |
| "TEAC", |
| "Floppy Drive", |
| US_SC_UFI, US_PR_CB, NULL, 0 ), |
| |
| /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ |
| UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, |
| "SigmaTel", |
| "USBMSC Audio Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Daniel Kukula <daniel.kuku@gmail.com> */ |
| UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100, |
| "Prolific Technology, Inc.", |
| "Prolific Storage Gadget", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_BAD_SENSE ), |
| |
| /* Reported by Rogerio Brito <rbrito@ime.usp.br> */ |
| UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001, |
| "Prolific Technology, Inc.", |
| "Mass Storage Device", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ |
| /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by |
| * Thomas Bartosik <tbartdev@gmx-topmail.de> */ |
| UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, |
| "Prolific Technology Inc.", |
| "Mass Storage Device", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), |
| |
| /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */ |
| UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101, |
| "Prolific Technology Inc.", |
| "ATAPI-6 Bridge Controller", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), |
| |
| /* Submitted by Benny Sjostrand <benny@hostmobility.com> */ |
| UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, |
| "Minolta", |
| "Dimage F300", |
| US_SC_SCSI, US_PR_BULK, NULL, 0 ), |
| |
| /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */ |
| UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, |
| "Minolta", |
| "DIMAGE E223", |
| US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), |
| |
| UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, |
| "Hagiwara", |
| "Flashgate", |
| US_SC_SCSI, US_PR_BULK, NULL, 0 ), |
| |
| /* Reported by David Hamilton <niftimusmaximus@lycos.com> */ |
| UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, |
| "Thomson Multimedia Inc.", |
| "RCA RD1080 MP3 Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ |
| UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, |
| "RockChip", |
| "MP3", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), |
| |
| /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> |
| * Support the following product : |
| * "Dane-Elec MediaTouch" |
| */ |
| UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, |
| "RockChip", |
| "MTP", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), |
| |
| /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> |
| * This USB MP3/AVI player device fails and disconnects if more than 128 |
| * sectors (64kB) are read/written in a single command, and may be present |
| * at least in the following products: |
| * "Magnex Digital Video Panel DVP 1800" |
| * "MP4 AIGO 4GB SLOT SD" |
| * "Teclast TL-C260 MP3" |
| * "i.Meizu PMP MP3/MP4" |
| * "Speed MV8 MP4 Audio Player" |
| */ |
| UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, |
| "RockChip", |
| "ROCK MP3", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64), |
| |
| /* Reported by Olivier Blondeau <zeitoun@gmail.com> */ |
| UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, |
| "ATMEL", |
| "SND1 Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE), |
| |
| /* Submitted by Roman Hodek <roman@hodek.net> */ |
| UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, |
| "Sandisk", |
| "ImageMate SDDR-05a", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, |
| "SanDisk Corporation", |
| "ImageMate CompactFlash USB", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, |
| "Sandisk", |
| "ImageMate SDDR-12", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Reported by Eero Volotinen <eero@ping-viini.org> */ |
| UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, |
| "Freecom Technologies", |
| "FHD-Classic", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, |
| "Microtech", |
| "USB-SCSI-DB25", |
| US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, |
| "Microtech", |
| "USB-SCSI-HD50", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, |
| US_FL_SCM_MULT_TARG ), |
| |
| #ifdef NO_SDDR09 |
| UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, |
| "Microtech", |
| "CameraMate", |
| US_SC_SCSI, US_PR_CB, NULL, |
| US_FL_SINGLE_LUN ), |
| #endif |
| |
| /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 |
| * Only revision 1.13 tested (same for all of the above devices, |
| * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. |
| * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. |
| * See also http://martin.wilck.bei.t-online.de/#kecf . |
| */ |
| UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, |
| "Datafab", |
| "KECF-USB", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Rauch Wolke <rauchwolke@gmx.net> |
| * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) |
| */ |
| UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, |
| "Simple Tech/Datafab", |
| "CF+SM Reader", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), |
| |
| /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant |
| * to the USB storage specification in two ways: |
| * - They tell us they are using transport protocol CBI. In reality they |
| * are using transport protocol CB. |
| * - They don't like the INQUIRY command. So we must handle this command |
| * of the SCSI layer ourselves. |
| * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have |
| * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB). |
| * So don't remove the US_PR_CB override! |
| * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override. |
| */ |
| UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, |
| "Casio", |
| "QV DigitalCamera", |
| US_SC_8070, US_PR_CB, NULL, |
| US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), |
| |
| /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ |
| UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, |
| "Samsung", |
| "Digimax 410", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY), |
| |
| /* Reported by Luciano Rocha <luciano@eurotux.com> */ |
| UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, |
| "Argosy", |
| "Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */ |
| UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, |
| "Argosy", |
| "Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ |
| UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, |
| "Argosy", |
| "Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. |
| * Flag will support Bulk devices which use a standards-violating 32-byte |
| * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with |
| * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. |
| */ |
| |
| UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, |
| "Grandtech", |
| "DC2MEGA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_BULK32), |
| |
| /* Andrew Lunn <andrew@lunn.ch> |
| * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL |
| * on LUN 4. |
| * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" |
| */ |
| UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, |
| "PanDigital", |
| "Photo Frame", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NOT_LOCKABLE), |
| |
| /* Submitted by Jan De Luyck <lkml@kcore.org> */ |
| UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, |
| "CITIZEN", |
| "X1DE-USB", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN), |
| |
| /* Submitted by Dylan Taft <d13f00l@gmail.com> |
| * US_FL_IGNORE_RESIDUE Needed |
| */ |
| UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, |
| "AIPTEK", |
| "Aiptek USB Keychain MP3 Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE), |
| |
| /* Entry needed for flags. Moreover, all devices with this ID use |
| * bulk-only transport, but _some_ falsely report Control/Bulk instead. |
| * One example is "Trumpion Digital Research MYMP3". |
| * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de> |
| */ |
| UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, |
| "Trumpion", |
| "t33520 USB Flash Card Controller", |
| US_SC_DEVICE, US_PR_BULK, NULL, |
| US_FL_NEED_OVERRIDE ), |
| |
| /* Reported by Filippo Bardelli <filibard@libero.it> |
| * The device reports a subclass of RBC, which is wrong. |
| */ |
| UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, |
| "Trumpion Microelectronics, Inc.", |
| "33520 USB Digital Voice Recorder", |
| US_SC_UFI, US_PR_DEVICE, NULL, |
| 0), |
| |
| /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ |
| UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, |
| "Trumpion", |
| "MP3 player", |
| US_SC_RBC, US_PR_BULK, NULL, |
| 0 ), |
| |
| /* aeb */ |
| UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, |
| "Feiya", |
| "5-in-1 Card Reader", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* This Pentax still camera is not conformant |
| * to the USB storage specification: - |
| * - It does not like the INQUIRY command. So we must handle this command |
| * of the SCSI layer ourselves. |
| * Tested on Rev. 10.00 (0x1000) |
| * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk> |
| */ |
| UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, |
| "Pentax", |
| "Optio 2/3/400", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* These are virtual windows driver CDs, which the zd1211rw driver |
| * automatically converts into WLAN devices. */ |
| UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, |
| "ZyXEL", |
| "G-220F USB-WLAN Install", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_DEVICE ), |
| |
| UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, |
| "SiteCom", |
| "WL-117 USB-WLAN Install", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_DEVICE ), |
| |
| /* Reported by Dan Williams <dcbw@redhat.com> |
| * Option N.V. mobile broadband modems |
| * Ignore driver CD mode and force into modem mode by default. |
| */ |
| |
| /* iCON 225 */ |
| UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999, |
| "Option N.V.", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, option_ms_init, |
| 0), |
| |
| /* Reported by F. Aben <f.aben@option.com> |
| * This device (wrongly) has a vendor-specific device descriptor. |
| * The entry is needed so usb-storage can bind to it's mass-storage |
| * interface as an interface driver */ |
| UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, |
| "Option", |
| "GI 0401 SD-Card", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| 0 ), |
| |
| /* Reported by Jan Dumon <j.dumon@option.com> |
| * This device (wrongly) has a vendor-specific device descriptor. |
| * The entry is needed so usb-storage can bind to it's mass-storage |
| * interface as an interface driver */ |
| UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, |
| "Option", |
| "GI 0431 SD-Card", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| 0 ), |
| |
| /* Reported by Ben Efros <ben@pc-doctor.com> */ |
| UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, |
| "Seagate", |
| "FreeAgent Pro", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SANE_SENSE ), |
| |
| UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, |
| "Maxtor", |
| "USB to SATA", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SANE_SENSE), |
| |
| /* |
| * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688. |
| * The device blatantly ignores LUN and returns 1 in GetMaxLUN. |
| */ |
| UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, |
| "Unknown", |
| "Unknown", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SINGLE_LUN ), |
| |
| /* Submitted by Joris Struyve <joris@struyve.be> */ |
| UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, |
| "Medion", |
| "MD 7425", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY), |
| |
| /* |
| * Entry for Jenoptik JD 5200z3 |
| * |
| * email: car.busse@gmx.de |
| */ |
| UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, |
| "Jenoptik", |
| "JD 5200 z3", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), |
| |
| /* Reported by Jason Johnston <killean@shaw.ca> */ |
| UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000, |
| "Macpower Technology Co.LTD.", |
| "USB 2.0 3.5\" DEVICE", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| /* Reported by Lubomir Blaha <tritol@trilogic.cz> |
| * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this |
| * works for me. Can anybody correct these values? (I able to test corrected |
| * version.) |
| */ |
| UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, |
| "Netac", |
| "USB-CF-Card", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Reported by Edward Chapman (taken from linux-usb mailing list) |
| Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */ |
| UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, |
| "Netac", |
| "USB Flash Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| |
| /* Patch by Stephan Walter <stephan.walter@epfl.ch> |
| * I don't know why, but it works... */ |
| UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, |
| "WINWARD", |
| "Music Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Ian McConnell <ian at emit.demon.co.uk> */ |
| UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, |
| "PNP_MP3", |
| "PNP_MP3 PLAYER", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */ |
| UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, |
| "Cowon Systems", |
| "iAUDIO M5", |
| US_SC_DEVICE, US_PR_BULK, NULL, |
| US_FL_NEED_OVERRIDE ), |
| |
| /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ |
| UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, |
| "USB", |
| "Solid state disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY ), |
| |
| /* Submitted by Daniel Drake <dsd@gentoo.org> |
| * Reported by dayul on the Gentoo Forums */ |
| UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, |
| "Ours Technology", |
| "Flash Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */ |
| UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, |
| "USB", |
| "Flash Disk", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Benjamin Schiller <sbenni@gmx.de> |
| * It is also sold by Easylite as DJ 20 */ |
| UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, |
| "Typhoon", |
| "My DJ 1820", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), |
| |
| /* Patch by Leonid Petrov mail at lpetrov.net |
| * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org> |
| * http://www.qbik.ch/usb/devices/showdev.php?id=1705 |
| * Updated to 103 device by MJ Ray mjr at phonecoop.coop |
| */ |
| UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, |
| "Oracom Co., Ltd", |
| "ORC-200M", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* David Kuehling <dvdkhlng@gmx.de>: |
| * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI |
| * errors when trying to write. |
| */ |
| UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, |
| "C-MEX", |
| "A-VOX", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Jeremy Katz <katzj@redhat.com>: |
| * The Blackberry Pearl can run in two modes; a usb-storage only mode |
| * and a mode that allows access via mass storage and to its database. |
| * The berry_charge module will set the device to dual mode and thus we |
| * should ignore its native mode if that module is built |
| */ |
| #ifdef CONFIG_USB_BERRY_CHARGE |
| UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001, |
| "RIM", |
| "Blackberry Pearl", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_DEVICE ), |
| #endif |
| |
| /* Reported by Michael Stattmann <michael@stattmann.com> */ |
| UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, |
| "Sony Ericsson", |
| "V800-Vodafone 802", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_NO_WP_DETECT ), |
| |
| /* Reported by The Solutor <thesolutor@gmail.com> */ |
| UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, |
| "Sony Ericsson", |
| "MD400", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_DEVICE), |
| |
| /* Reported by Jan Mate <mate@fiit.stuba.sk> |
| * and by Soeren Sonnenburg <kernel@nn7.de> */ |
| UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, |
| "Sony Ericsson", |
| "P990i", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ |
| UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, |
| "Sony Ericsson", |
| "M600i", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Ricardo Barberis <ricardo@dattatec.com> */ |
| UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, |
| "Sony Ericsson", |
| "P1i", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> |
| * Tested on hardware version 1.10. |
| * Entry is needed only for the initializer function override. |
| * Devices with bcd > 110 seem to not need it while those |
| * with bcd < 110 appear to need it. |
| */ |
| UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, |
| "Desknote", |
| "UCR-61S2B", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, |
| 0 ), |
| |
| UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999, |
| "Western Digital", |
| "External HDD", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_SANE_SENSE), |
| |
| /* Reported by Fabio Venturi <f.venturi@tdnet.it> |
| * The device reports a vendor-specific bDeviceClass. |
| */ |
| UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, |
| "Actions Semiconductor", |
| "Mtp device", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| 0), |
| |
| /* Reported by Pascal Terjan <pterjan@mandriva.com> |
| * Ignore driver CD mode and force into modem mode by default. |
| */ |
| UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, |
| "D-Link", |
| "USB Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE), |
| |
| /* Reported by Kevin Lloyd <linux@sierrawireless.com> |
| * Entry is needed for the initializer function override, |
| * which instructs the device to load as a modem |
| * device. |
| */ |
| UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, |
| "Sierra Wireless", |
| "USB MMC Storage", |
| US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, |
| 0), |
| |
| /* Reported by Jaco Kroon <jaco@kroon.co.za> |
| * The usb-storage module found on the Digitech GNX4 (and supposedly other |
| * devices) misbehaves and causes a bunch of invalid I/O errors. |
| */ |
| UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, |
| "Digitech HMG", |
| "DigiTech Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by fangxiaozhi <huananhu@huawei.com> |
| * This brings the HUAWEI data card devices into multi-port mode |
| */ |
| UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, |
| "HUAWEI MOBILE", |
| "Mass Storage", |
| US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, |
| 0), |
| |
| /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ |
| UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, |
| "Minolta", |
| "Dimage Z10", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| 0 ), |
| |
| /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ |
| UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, |
| "SWISSBIT", |
| "Black Silver", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Francesco Foresti <frafore@tiscali.it> */ |
| UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, |
| "Super Top", |
| "IDE DEVICE", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| * JMicron responds to USN and several other SCSI ioctls with a |
| * residue that causes subsequent I/O requests to fail. */ |
| UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, |
| "JMicron", |
| "USB to ATA/ATAPI Bridge", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), |
| |
| /* Reported by Robert Schedel <r.schedel@yahoo.de> |
| * Note: this is a 'super top' device like the above 14cd/6600 device */ |
| UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, |
| "Teac", |
| "HD-35PUK-B", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, |
| "ST", |
| "2A", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY), |
| |
| /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> |
| * and Renato Perini <rperini@email.it> |
| */ |
| UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, |
| "Motorola", |
| "RAZR V3x", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), |
| |
| /* |
| * Patch by Constantin Baranov <const@tltsu.ru> |
| * Report by Andreas Koenecke. |
| * Motorola ROKR Z6. |
| */ |
| UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101, |
| "Motorola", |
| "MSnc.", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), |
| |
| /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ |
| UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, |
| "MPIO", |
| "HS200", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_GO_SLOW ), |
| |
| /* Reported by Rohan Hart <rohan.hart17@gmail.com> */ |
| UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, |
| "INTOVA", |
| "Pixtreme", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_FIX_CAPACITY ), |
| |
| /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> |
| * Mio Moov 330 |
| */ |
| UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, |
| "Mitac", |
| "Mio DigiWalker USB Sync", |
| US_SC_DEVICE,US_PR_DEVICE,NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ |
| UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, |
| "iRiver", |
| "MP3 T10", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_IGNORE_RESIDUE ), |
| |
| /* Reported by Sergey Pinaev <dfo@antex.ru> */ |
| UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000, |
| "iRiver", |
| "P7K", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_MAX_SECTORS_64 ), |
| |
| /* |
| * David Härdeman <david@2gen.com> |
| * The key makes the SCSI stack print confusing (but harmless) messages |
| */ |
| UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, |
| "Iomega", |
| "Micro Mini 1GB", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), |
| |
| /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ |
| UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, |
| "DataStor", |
| "USB4500 FW1.04", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, |
| US_FL_CAPACITY_HEURISTICS), |
| |
| /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */ |
| UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, |
| "TGE", |
| "Digital MP3 Audio Player", |
| US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), |
| |
| /* Control/Bulk transport for all SubClass values */ |
| USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR), |
| |
| /* Control/Bulk/Interrupt transport for all SubClass values */ |
| USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR), |
| |
| /* Bulk-only transport for all SubClass values */ |
| USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR), |
| USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0), |