| /* |
| * Processor capabilities determination functions. |
| * |
| * Copyright (C) xxxx the Anonymous |
| * Copyright (C) 1994 - 2006 Ralf Baechle |
| * Copyright (C) 2003, 2004 Maciej W. Rozycki |
| * Copyright (C) 2001, 2004 MIPS Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/smp.h> |
| #include <linux/stddef.h> |
| |
| #include <asm/bugs.h> |
| #include <asm/cpu.h> |
| #include <asm/fpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/system.h> |
| #include <asm/watch.h> |
| |
| /* |
| * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, |
| * the implementation of the "wait" feature differs between CPU families. This |
| * points to the function that implements CPU specific wait. |
| * The wait instruction stops the pipeline and reduces the power consumption of |
| * the CPU very much. |
| */ |
| void (*cpu_wait)(void); |
| |
| static void r3081_wait(void) |
| { |
| unsigned long cfg = read_c0_conf(); |
| write_c0_conf(cfg | R30XX_CONF_HALT); |
| } |
| |
| static void r39xx_wait(void) |
| { |
| local_irq_disable(); |
| if (!need_resched()) |
| write_c0_conf(read_c0_conf() | TX39_CONF_HALT); |
| local_irq_enable(); |
| } |
| |
| extern void r4k_wait(void); |
| |
| /* |
| * This variant is preferable as it allows testing need_resched and going to |
| * sleep depending on the outcome atomically. Unfortunately the "It is |
| * implementation-dependent whether the pipeline restarts when a non-enabled |
| * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes |
| * using this version a gamble. |
| */ |
| void r4k_wait_irqoff(void) |
| { |
| local_irq_disable(); |
| if (!need_resched()) |
| __asm__(" .set push \n" |
| " .set mips3 \n" |
| " wait \n" |
| " .set pop \n"); |
| local_irq_enable(); |
| __asm__(" .globl __pastwait \n" |
| "__pastwait: \n"); |
| return; |
| } |
| |
| /* |
| * The RM7000 variant has to handle erratum 38. The workaround is to not |
| * have any pending stores when the WAIT instruction is executed. |
| */ |
| static void rm7k_wait_irqoff(void) |
| { |
| local_irq_disable(); |
| if (!need_resched()) |
| __asm__( |
| " .set push \n" |
| " .set mips3 \n" |
| " .set noat \n" |
| " mfc0 $1, $12 \n" |
| " sync \n" |
| " mtc0 $1, $12 # stalls until W stage \n" |
| " wait \n" |
| " mtc0 $1, $12 # stalls until W stage \n" |
| " .set pop \n"); |
| local_irq_enable(); |
| } |
| |
| /* |
| * The Au1xxx wait is available only if using 32khz counter or |
| * external timer source, but specifically not CP0 Counter. |
| * alchemy/common/time.c may override cpu_wait! |
| */ |
| static void au1k_wait(void) |
| { |
| __asm__(" .set mips3 \n" |
| " cache 0x14, 0(%0) \n" |
| " cache 0x14, 32(%0) \n" |
| " sync \n" |
| " nop \n" |
| " wait \n" |
| " nop \n" |
| " nop \n" |
| " nop \n" |
| " nop \n" |
| " .set mips0 \n" |
| : : "r" (au1k_wait)); |
| } |
| |
| static int __initdata nowait; |
| |
| static int __init wait_disable(char *s) |
| { |
| nowait = 1; |
| |
| return 1; |
| } |
| |
| __setup("nowait", wait_disable); |
| |
| void __init check_wait(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| if (nowait) { |
| printk("Wait instruction disabled.\n"); |
| return; |
| } |
| |
| switch (c->cputype) { |
| case CPU_R3081: |
| case CPU_R3081E: |
| cpu_wait = r3081_wait; |
| break; |
| case CPU_TX3927: |
| cpu_wait = r39xx_wait; |
| break; |
| case CPU_R4200: |
| /* case CPU_R4300: */ |
| case CPU_R4600: |
| case CPU_R4640: |
| case CPU_R4650: |
| case CPU_R4700: |
| case CPU_R5000: |
| case CPU_R5500: |
| case CPU_NEVADA: |
| case CPU_4KC: |
| case CPU_4KEC: |
| case CPU_4KSC: |
| case CPU_5KC: |
| case CPU_25KF: |
| case CPU_PR4450: |
| case CPU_BCM3302: |
| case CPU_BCM6338: |
| case CPU_BCM6348: |
| case CPU_BCM6358: |
| case CPU_CAVIUM_OCTEON: |
| cpu_wait = r4k_wait; |
| break; |
| |
| case CPU_RM7000: |
| cpu_wait = rm7k_wait_irqoff; |
| break; |
| |
| case CPU_24K: |
| case CPU_34K: |
| case CPU_1004K: |
| cpu_wait = r4k_wait; |
| if (read_c0_config7() & MIPS_CONF7_WII) |
| cpu_wait = r4k_wait_irqoff; |
| break; |
| |
| case CPU_74K: |
| cpu_wait = r4k_wait; |
| if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) |
| cpu_wait = r4k_wait_irqoff; |
| break; |
| |
| case CPU_TX49XX: |
| cpu_wait = r4k_wait_irqoff; |
| break; |
| case CPU_ALCHEMY: |
| cpu_wait = au1k_wait; |
| break; |
| case CPU_20KC: |
| /* |
| * WAIT on Rev1.0 has E1, E2, E3 and E16. |
| * WAIT on Rev2.0 and Rev3.0 has E16. |
| * Rev3.1 WAIT is nop, why bother |
| */ |
| if ((c->processor_id & 0xff) <= 0x64) |
| break; |
| |
| /* |
| * Another rev is incremeting c0_count at a reduced clock |
| * rate while in WAIT mode. So we basically have the choice |
| * between using the cp0 timer as clocksource or avoiding |
| * the WAIT instruction. Until more details are known, |
| * disable the use of WAIT for 20Kc entirely. |
| cpu_wait = r4k_wait; |
| */ |
| break; |
| case CPU_RM9000: |
| if ((c->processor_id & 0x00ff) >= 0x40) |
| cpu_wait = r4k_wait; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static inline void check_errata(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| switch (c->cputype) { |
| case CPU_34K: |
| /* |
| * Erratum "RPS May Cause Incorrect Instruction Execution" |
| * This code only handles VPE0, any SMP/SMTC/RTOS code |
| * making use of VPE1 will be responsable for that VPE. |
| */ |
| if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2) |
| write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void __init check_bugs32(void) |
| { |
| check_errata(); |
| } |
| |
| /* |
| * Probe whether cpu has config register by trying to play with |
| * alternate cache bit and see whether it matters. |
| * It's used by cpu_probe to distinguish between R3000A and R3081. |
| */ |
| static inline int cpu_has_confreg(void) |
| { |
| #ifdef CONFIG_CPU_R3000 |
| extern unsigned long r3k_cache_size(unsigned long); |
| unsigned long size1, size2; |
| unsigned long cfg = read_c0_conf(); |
| |
| size1 = r3k_cache_size(ST0_ISC); |
| write_c0_conf(cfg ^ R30XX_CONF_AC); |
| size2 = r3k_cache_size(ST0_ISC); |
| write_c0_conf(cfg); |
| return size1 != size2; |
| #else |
| return 0; |
| #endif |
| } |
| |
| /* |
| * Get the FPU Implementation/Revision. |
| */ |
| static inline unsigned long cpu_get_fpu_id(void) |
| { |
| unsigned long tmp, fpu_id; |
| |
| tmp = read_c0_status(); |
| __enable_fpu(); |
| fpu_id = read_32bit_cp1_register(CP1_REVISION); |
| write_c0_status(tmp); |
| return fpu_id; |
| } |
| |
| /* |
| * Check the CPU has an FPU the official way. |
| */ |
| static inline int __cpu_has_fpu(void) |
| { |
| return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE); |
| } |
| |
| #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ |
| | MIPS_CPU_COUNTER) |
| |
| static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_R2000: |
| c->cputype = CPU_R2000; |
| __cpu_name[cpu] = "R2000"; |
| c->isa_level = MIPS_CPU_ISA_I; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | |
| MIPS_CPU_NOFPUEX; |
| if (__cpu_has_fpu()) |
| c->options |= MIPS_CPU_FPU; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R3000: |
| if ((c->processor_id & 0xff) == PRID_REV_R3000A) { |
| if (cpu_has_confreg()) { |
| c->cputype = CPU_R3081E; |
| __cpu_name[cpu] = "R3081"; |
| } else { |
| c->cputype = CPU_R3000A; |
| __cpu_name[cpu] = "R3000A"; |
| } |
| break; |
| } else { |
| c->cputype = CPU_R3000; |
| __cpu_name[cpu] = "R3000"; |
| } |
| c->isa_level = MIPS_CPU_ISA_I; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | |
| MIPS_CPU_NOFPUEX; |
| if (__cpu_has_fpu()) |
| c->options |= MIPS_CPU_FPU; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R4000: |
| if (read_c0_config() & CONF_SC) { |
| if ((c->processor_id & 0xff) >= PRID_REV_R4400) { |
| c->cputype = CPU_R4400PC; |
| __cpu_name[cpu] = "R4400PC"; |
| } else { |
| c->cputype = CPU_R4000PC; |
| __cpu_name[cpu] = "R4000PC"; |
| } |
| } else { |
| if ((c->processor_id & 0xff) >= PRID_REV_R4400) { |
| c->cputype = CPU_R4400SC; |
| __cpu_name[cpu] = "R4400SC"; |
| } else { |
| c->cputype = CPU_R4000SC; |
| __cpu_name[cpu] = "R4000SC"; |
| } |
| } |
| |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_WATCH | MIPS_CPU_VCE | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_VR41XX: |
| switch (c->processor_id & 0xf0) { |
| case PRID_REV_VR4111: |
| c->cputype = CPU_VR4111; |
| __cpu_name[cpu] = "NEC VR4111"; |
| break; |
| case PRID_REV_VR4121: |
| c->cputype = CPU_VR4121; |
| __cpu_name[cpu] = "NEC VR4121"; |
| break; |
| case PRID_REV_VR4122: |
| if ((c->processor_id & 0xf) < 0x3) { |
| c->cputype = CPU_VR4122; |
| __cpu_name[cpu] = "NEC VR4122"; |
| } else { |
| c->cputype = CPU_VR4181A; |
| __cpu_name[cpu] = "NEC VR4181A"; |
| } |
| break; |
| case PRID_REV_VR4130: |
| if ((c->processor_id & 0xf) < 0x4) { |
| c->cputype = CPU_VR4131; |
| __cpu_name[cpu] = "NEC VR4131"; |
| } else { |
| c->cputype = CPU_VR4133; |
| __cpu_name[cpu] = "NEC VR4133"; |
| } |
| break; |
| default: |
| printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); |
| c->cputype = CPU_VR41XX; |
| __cpu_name[cpu] = "NEC Vr41xx"; |
| break; |
| } |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS; |
| c->tlbsize = 32; |
| break; |
| case PRID_IMP_R4300: |
| c->cputype = CPU_R4300; |
| __cpu_name[cpu] = "R4300"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 32; |
| break; |
| case PRID_IMP_R4600: |
| c->cputype = CPU_R4600; |
| __cpu_name[cpu] = "R4600"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| #if 0 |
| case PRID_IMP_R4650: |
| /* |
| * This processor doesn't have an MMU, so it's not |
| * "real easy" to run Linux on it. It is left purely |
| * for documentation. Commented out because it shares |
| * it's c0_prid id number with the TX3900. |
| */ |
| c->cputype = CPU_R4650; |
| __cpu_name[cpu] = "R4650"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| #endif |
| case PRID_IMP_TX39: |
| c->isa_level = MIPS_CPU_ISA_I; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE; |
| |
| if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { |
| c->cputype = CPU_TX3927; |
| __cpu_name[cpu] = "TX3927"; |
| c->tlbsize = 64; |
| } else { |
| switch (c->processor_id & 0xff) { |
| case PRID_REV_TX3912: |
| c->cputype = CPU_TX3912; |
| __cpu_name[cpu] = "TX3912"; |
| c->tlbsize = 32; |
| break; |
| case PRID_REV_TX3922: |
| c->cputype = CPU_TX3922; |
| __cpu_name[cpu] = "TX3922"; |
| c->tlbsize = 64; |
| break; |
| } |
| } |
| break; |
| case PRID_IMP_R4700: |
| c->cputype = CPU_R4700; |
| __cpu_name[cpu] = "R4700"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_TX49: |
| c->cputype = CPU_TX49XX; |
| __cpu_name[cpu] = "R49XX"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | MIPS_CPU_LLSC; |
| if (!(c->processor_id & 0x08)) |
| c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R5000: |
| c->cputype = CPU_R5000; |
| __cpu_name[cpu] = "R5000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R5432: |
| c->cputype = CPU_R5432; |
| __cpu_name[cpu] = "R5432"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_WATCH | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R5500: |
| c->cputype = CPU_R5500; |
| __cpu_name[cpu] = "R5500"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_WATCH | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_NEVADA: |
| c->cputype = CPU_NEVADA; |
| __cpu_name[cpu] = "Nevada"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R6000: |
| c->cputype = CPU_R6000; |
| __cpu_name[cpu] = "R6000"; |
| c->isa_level = MIPS_CPU_ISA_II; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 32; |
| break; |
| case PRID_IMP_R6000A: |
| c->cputype = CPU_R6000A; |
| __cpu_name[cpu] = "R6000A"; |
| c->isa_level = MIPS_CPU_ISA_II; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 32; |
| break; |
| case PRID_IMP_RM7000: |
| c->cputype = CPU_RM7000; |
| __cpu_name[cpu] = "RM7000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| /* |
| * Undocumented RM7000: Bit 29 in the info register of |
| * the RM7000 v2.0 indicates if the TLB has 48 or 64 |
| * entries. |
| * |
| * 29 1 => 64 entry JTLB |
| * 0 => 48 entry JTLB |
| */ |
| c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; |
| break; |
| case PRID_IMP_RM9000: |
| c->cputype = CPU_RM9000; |
| __cpu_name[cpu] = "RM9000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| /* |
| * Bit 29 in the info register of the RM9000 |
| * indicates if the TLB has 48 or 64 entries. |
| * |
| * 29 1 => 64 entry JTLB |
| * 0 => 48 entry JTLB |
| */ |
| c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; |
| break; |
| case PRID_IMP_R8000: |
| c->cputype = CPU_R8000; |
| __cpu_name[cpu] = "RM8000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 384; /* has weird TLB: 3-way x 128 */ |
| break; |
| case PRID_IMP_R10000: |
| c->cputype = CPU_R10000; |
| __cpu_name[cpu] = "R10000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R12000: |
| c->cputype = CPU_R12000; |
| __cpu_name[cpu] = "R12000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R14000: |
| c->cputype = CPU_R14000; |
| __cpu_name[cpu] = "R14000"; |
| c->isa_level = MIPS_CPU_ISA_IV; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_LOONGSON2: |
| c->cputype = CPU_LOONGSON2; |
| __cpu_name[cpu] = "ICT Loongson-2"; |
| c->isa_level = MIPS_CPU_ISA_III; |
| c->options = R4K_OPTS | |
| MIPS_CPU_FPU | MIPS_CPU_LLSC | |
| MIPS_CPU_32FPR; |
| c->tlbsize = 64; |
| break; |
| } |
| } |
| |
| static char unknown_isa[] __cpuinitdata = KERN_ERR \ |
| "Unsupported ISA type, c0.config0: %d."; |
| |
| static inline unsigned int decode_config0(struct cpuinfo_mips *c) |
| { |
| unsigned int config0; |
| int isa; |
| |
| config0 = read_c0_config(); |
| |
| if (((config0 & MIPS_CONF_MT) >> 7) == 1) |
| c->options |= MIPS_CPU_TLB; |
| isa = (config0 & MIPS_CONF_AT) >> 13; |
| switch (isa) { |
| case 0: |
| switch ((config0 & MIPS_CONF_AR) >> 10) { |
| case 0: |
| c->isa_level = MIPS_CPU_ISA_M32R1; |
| break; |
| case 1: |
| c->isa_level = MIPS_CPU_ISA_M32R2; |
| break; |
| default: |
| goto unknown; |
| } |
| break; |
| case 2: |
| switch ((config0 & MIPS_CONF_AR) >> 10) { |
| case 0: |
| c->isa_level = MIPS_CPU_ISA_M64R1; |
| break; |
| case 1: |
| c->isa_level = MIPS_CPU_ISA_M64R2; |
| break; |
| default: |
| goto unknown; |
| } |
| break; |
| default: |
| goto unknown; |
| } |
| |
| return config0 & MIPS_CONF_M; |
| |
| unknown: |
| panic(unknown_isa, config0); |
| } |
| |
| static inline unsigned int decode_config1(struct cpuinfo_mips *c) |
| { |
| unsigned int config1; |
| |
| config1 = read_c0_config1(); |
| |
| if (config1 & MIPS_CONF1_MD) |
| c->ases |= MIPS_ASE_MDMX; |
| if (config1 & MIPS_CONF1_WR) |
| c->options |= MIPS_CPU_WATCH; |
| if (config1 & MIPS_CONF1_CA) |
| c->ases |= MIPS_ASE_MIPS16; |
| if (config1 & MIPS_CONF1_EP) |
| c->options |= MIPS_CPU_EJTAG; |
| if (config1 & MIPS_CONF1_FP) { |
| c->options |= MIPS_CPU_FPU; |
| c->options |= MIPS_CPU_32FPR; |
| } |
| if (cpu_has_tlb) |
| c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1; |
| |
| return config1 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config2(struct cpuinfo_mips *c) |
| { |
| unsigned int config2; |
| |
| config2 = read_c0_config2(); |
| |
| if (config2 & MIPS_CONF2_SL) |
| c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; |
| |
| return config2 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config3(struct cpuinfo_mips *c) |
| { |
| unsigned int config3; |
| |
| config3 = read_c0_config3(); |
| |
| if (config3 & MIPS_CONF3_SM) |
| c->ases |= MIPS_ASE_SMARTMIPS; |
| if (config3 & MIPS_CONF3_DSP) |
| c->ases |= MIPS_ASE_DSP; |
| if (config3 & MIPS_CONF3_VINT) |
| c->options |= MIPS_CPU_VINT; |
| if (config3 & MIPS_CONF3_VEIC) |
| c->options |= MIPS_CPU_VEIC; |
| if (config3 & MIPS_CONF3_MT) |
| c->ases |= MIPS_ASE_MIPSMT; |
| if (config3 & MIPS_CONF3_ULRI) |
| c->options |= MIPS_CPU_ULRI; |
| |
| return config3 & MIPS_CONF_M; |
| } |
| |
| static void __cpuinit decode_configs(struct cpuinfo_mips *c) |
| { |
| int ok; |
| |
| /* MIPS32 or MIPS64 compliant CPU. */ |
| c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; |
| |
| c->scache.flags = MIPS_CACHE_NOT_PRESENT; |
| |
| ok = decode_config0(c); /* Read Config registers. */ |
| BUG_ON(!ok); /* Arch spec violation! */ |
| if (ok) |
| ok = decode_config1(c); |
| if (ok) |
| ok = decode_config2(c); |
| if (ok) |
| ok = decode_config3(c); |
| |
| mips_probe_watch_registers(c); |
| } |
| |
| #ifdef CONFIG_CPU_MIPSR2 |
| extern void spram_config(void); |
| #else |
| static inline void spram_config(void) {} |
| #endif |
| |
| static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_4KC: |
| c->cputype = CPU_4KC; |
| __cpu_name[cpu] = "MIPS 4Kc"; |
| break; |
| case PRID_IMP_4KEC: |
| c->cputype = CPU_4KEC; |
| __cpu_name[cpu] = "MIPS 4KEc"; |
| break; |
| case PRID_IMP_4KECR2: |
| c->cputype = CPU_4KEC; |
| __cpu_name[cpu] = "MIPS 4KEc"; |
| break; |
| case PRID_IMP_4KSC: |
| case PRID_IMP_4KSD: |
| c->cputype = CPU_4KSC; |
| __cpu_name[cpu] = "MIPS 4KSc"; |
| break; |
| case PRID_IMP_5KC: |
| c->cputype = CPU_5KC; |
| __cpu_name[cpu] = "MIPS 5Kc"; |
| break; |
| case PRID_IMP_20KC: |
| c->cputype = CPU_20KC; |
| __cpu_name[cpu] = "MIPS 20Kc"; |
| break; |
| case PRID_IMP_24K: |
| case PRID_IMP_24KE: |
| c->cputype = CPU_24K; |
| __cpu_name[cpu] = "MIPS 24Kc"; |
| break; |
| case PRID_IMP_25KF: |
| c->cputype = CPU_25KF; |
| __cpu_name[cpu] = "MIPS 25Kc"; |
| break; |
| case PRID_IMP_34K: |
| c->cputype = CPU_34K; |
| __cpu_name[cpu] = "MIPS 34Kc"; |
| break; |
| case PRID_IMP_74K: |
| c->cputype = CPU_74K; |
| __cpu_name[cpu] = "MIPS 74Kc"; |
| break; |
| case PRID_IMP_1004K: |
| c->cputype = CPU_1004K; |
| __cpu_name[cpu] = "MIPS 1004Kc"; |
| break; |
| } |
| |
| spram_config(); |
| } |
| |
| static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_AU1_REV1: |
| case PRID_IMP_AU1_REV2: |
| c->cputype = CPU_ALCHEMY; |
| switch ((c->processor_id >> 24) & 0xff) { |
| case 0: |
| __cpu_name[cpu] = "Au1000"; |
| break; |
| case 1: |
| __cpu_name[cpu] = "Au1500"; |
| break; |
| case 2: |
| __cpu_name[cpu] = "Au1100"; |
| break; |
| case 3: |
| __cpu_name[cpu] = "Au1550"; |
| break; |
| case 4: |
| __cpu_name[cpu] = "Au1200"; |
| if ((c->processor_id & 0xff) == 2) |
| __cpu_name[cpu] = "Au1250"; |
| break; |
| case 5: |
| __cpu_name[cpu] = "Au1210"; |
| break; |
| default: |
| __cpu_name[cpu] = "Au1xxx"; |
| break; |
| } |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_SB1: |
| c->cputype = CPU_SB1; |
| __cpu_name[cpu] = "SiByte SB1"; |
| /* FPU in pass1 is known to have issues. */ |
| if ((c->processor_id & 0xff) < 0x02) |
| c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); |
| break; |
| case PRID_IMP_SB1A: |
| c->cputype = CPU_SB1A; |
| __cpu_name[cpu] = "SiByte SB1A"; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_SR71000: |
| c->cputype = CPU_SR71000; |
| __cpu_name[cpu] = "Sandcraft SR71000"; |
| c->scache.ways = 8; |
| c->tlbsize = 64; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_PR4450: |
| c->cputype = CPU_PR4450; |
| __cpu_name[cpu] = "Philips PR4450"; |
| c->isa_level = MIPS_CPU_ISA_M32R1; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_BCM3302: |
| /* same as PRID_IMP_BCM6338 */ |
| c->cputype = CPU_BCM3302; |
| __cpu_name[cpu] = "Broadcom BCM3302"; |
| break; |
| case PRID_IMP_BCM4710: |
| c->cputype = CPU_BCM4710; |
| __cpu_name[cpu] = "Broadcom BCM4710"; |
| break; |
| case PRID_IMP_BCM6345: |
| c->cputype = CPU_BCM6345; |
| __cpu_name[cpu] = "Broadcom BCM6345"; |
| break; |
| case PRID_IMP_BCM6348: |
| c->cputype = CPU_BCM6348; |
| __cpu_name[cpu] = "Broadcom BCM6348"; |
| break; |
| case PRID_IMP_BCM4350: |
| switch (c->processor_id & 0xf0) { |
| case PRID_REV_BCM6358: |
| c->cputype = CPU_BCM6358; |
| __cpu_name[cpu] = "Broadcom BCM6358"; |
| break; |
| default: |
| c->cputype = CPU_UNKNOWN; |
| break; |
| } |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & 0xff00) { |
| case PRID_IMP_CAVIUM_CN38XX: |
| case PRID_IMP_CAVIUM_CN31XX: |
| case PRID_IMP_CAVIUM_CN30XX: |
| case PRID_IMP_CAVIUM_CN58XX: |
| case PRID_IMP_CAVIUM_CN56XX: |
| case PRID_IMP_CAVIUM_CN50XX: |
| case PRID_IMP_CAVIUM_CN52XX: |
| c->cputype = CPU_CAVIUM_OCTEON; |
| __cpu_name[cpu] = "Cavium Octeon"; |
| break; |
| default: |
| printk(KERN_INFO "Unknown Octeon chip!\n"); |
| c->cputype = CPU_UNKNOWN; |
| break; |
| } |
| } |
| |
| const char *__cpu_name[NR_CPUS]; |
| |
| __cpuinit void cpu_probe(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| unsigned int cpu = smp_processor_id(); |
| |
| c->processor_id = PRID_IMP_UNKNOWN; |
| c->fpu_id = FPIR_IMP_NONE; |
| c->cputype = CPU_UNKNOWN; |
| |
| c->processor_id = read_c0_prid(); |
| switch (c->processor_id & 0xff0000) { |
| case PRID_COMP_LEGACY: |
| cpu_probe_legacy(c, cpu); |
| break; |
| case PRID_COMP_MIPS: |
| cpu_probe_mips(c, cpu); |
| break; |
| case PRID_COMP_ALCHEMY: |
| cpu_probe_alchemy(c, cpu); |
| break; |
| case PRID_COMP_SIBYTE: |
| cpu_probe_sibyte(c, cpu); |
| break; |
| case PRID_COMP_BROADCOM: |
| cpu_probe_broadcom(c, cpu); |
| break; |
| case PRID_COMP_SANDCRAFT: |
| cpu_probe_sandcraft(c, cpu); |
| break; |
| case PRID_COMP_NXP: |
| cpu_probe_nxp(c, cpu); |
| break; |
| case PRID_COMP_CAVIUM: |
| cpu_probe_cavium(c, cpu); |
| break; |
| } |
| |
| BUG_ON(!__cpu_name[cpu]); |
| BUG_ON(c->cputype == CPU_UNKNOWN); |
| |
| /* |
| * Platform code can force the cpu type to optimize code |
| * generation. In that case be sure the cpu type is correctly |
| * manually setup otherwise it could trigger some nasty bugs. |
| */ |
| BUG_ON(current_cpu_type() != c->cputype); |
| |
| if (c->options & MIPS_CPU_FPU) { |
| c->fpu_id = cpu_get_fpu_id(); |
| |
| if (c->isa_level == MIPS_CPU_ISA_M32R1 || |
| c->isa_level == MIPS_CPU_ISA_M32R2 || |
| c->isa_level == MIPS_CPU_ISA_M64R1 || |
| c->isa_level == MIPS_CPU_ISA_M64R2) { |
| if (c->fpu_id & MIPS_FPIR_3D) |
| c->ases |= MIPS_ASE_MIPS3D; |
| } |
| } |
| |
| if (cpu_has_mips_r2) |
| c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; |
| else |
| c->srsets = 1; |
| } |
| |
| __cpuinit void cpu_report(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| printk(KERN_INFO "CPU revision is: %08x (%s)\n", |
| c->processor_id, cpu_name_string()); |
| if (c->options & MIPS_CPU_FPU) |
| printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); |
| } |