| /* |
| * Atmel AT91 SAM9 SoCs reset code |
| * |
| * Copyright (C) 2007 Atmel Corporation. |
| * Copyright (C) BitBox Ltd 2010 |
| * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> |
| * Copyright (C) 2014 Free Electrons |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| |
| #include <soc/at91/at91sam9_ddrsdr.h> |
| #include <soc/at91/at91sam9_sdramc.h> |
| |
| #define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ |
| #define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */ |
| #define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */ |
| #define AT91_RSTC_EXTRST BIT(3) /* External Reset */ |
| #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ |
| |
| #define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ |
| #define AT91_RSTC_URSTS BIT(0) /* User Reset Status */ |
| #define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */ |
| #define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */ |
| #define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */ |
| |
| #define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ |
| #define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */ |
| #define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */ |
| #define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */ |
| |
| enum reset_type { |
| RESET_TYPE_GENERAL = 0, |
| RESET_TYPE_WAKEUP = 1, |
| RESET_TYPE_WATCHDOG = 2, |
| RESET_TYPE_SOFTWARE = 3, |
| RESET_TYPE_USER = 4, |
| }; |
| |
| static void __iomem *at91_ramc_base[2], *at91_rstc_base; |
| |
| /* |
| * unless the SDRAM is cleanly shutdown before we hit the |
| * reset register it can be left driving the data bus and |
| * killing the chance of a subsequent boot from NAND |
| */ |
| static int at91sam9260_restart(struct notifier_block *this, unsigned long mode, |
| void *cmd) |
| { |
| asm volatile( |
| /* Align to cache lines */ |
| ".balign 32\n\t" |
| |
| /* Disable SDRAM accesses */ |
| "str %2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t" |
| |
| /* Power down SDRAM */ |
| "str %3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t" |
| |
| /* Reset CPU */ |
| "str %4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t" |
| |
| "b .\n\t" |
| : |
| : "r" (at91_ramc_base[0]), |
| "r" (at91_rstc_base), |
| "r" (1), |
| "r" cpu_to_le32(AT91_SDRAMC_LPCB_POWER_DOWN), |
| "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode, |
| void *cmd) |
| { |
| asm volatile( |
| /* |
| * Test wether we have a second RAM controller to care |
| * about. |
| * |
| * First, test that we can dereference the virtual address. |
| */ |
| "cmp %1, #0\n\t" |
| "beq 1f\n\t" |
| |
| /* Then, test that the RAM controller is enabled */ |
| "ldr r0, [%1]\n\t" |
| "cmp r0, #0\n\t" |
| |
| /* Align to cache lines */ |
| ".balign 32\n\t" |
| |
| /* Disable SDRAM0 accesses */ |
| "1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" |
| /* Power down SDRAM0 */ |
| " str %4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" |
| /* Disable SDRAM1 accesses */ |
| " strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" |
| /* Power down SDRAM1 */ |
| " strne %4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" |
| /* Reset CPU */ |
| " str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t" |
| |
| " b .\n\t" |
| : |
| : "r" (at91_ramc_base[0]), |
| "r" (at91_ramc_base[1]), |
| "r" (at91_rstc_base), |
| "r" (1), |
| "r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN), |
| "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST) |
| : "r0"); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static void __init at91_reset_status(struct platform_device *pdev) |
| { |
| u32 reg = readl(at91_rstc_base + AT91_RSTC_SR); |
| char *reason; |
| |
| switch ((reg & AT91_RSTC_RSTTYP) >> 8) { |
| case RESET_TYPE_GENERAL: |
| reason = "general reset"; |
| break; |
| case RESET_TYPE_WAKEUP: |
| reason = "wakeup"; |
| break; |
| case RESET_TYPE_WATCHDOG: |
| reason = "watchdog reset"; |
| break; |
| case RESET_TYPE_SOFTWARE: |
| reason = "software reset"; |
| break; |
| case RESET_TYPE_USER: |
| reason = "user reset"; |
| break; |
| default: |
| reason = "unknown reset"; |
| break; |
| } |
| |
| pr_info("AT91: Starting after %s\n", reason); |
| } |
| |
| static const struct of_device_id at91_ramc_of_match[] = { |
| { .compatible = "atmel,at91sam9260-sdramc", }, |
| { .compatible = "atmel,at91sam9g45-ddramc", }, |
| { .compatible = "atmel,sama5d3-ddramc", }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct of_device_id at91_reset_of_match[] = { |
| { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart }, |
| { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, |
| { /* sentinel */ } |
| }; |
| |
| static struct notifier_block at91_restart_nb = { |
| .priority = 192, |
| }; |
| |
| static int at91_reset_of_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct device_node *np; |
| int idx = 0; |
| |
| at91_rstc_base = of_iomap(pdev->dev.of_node, 0); |
| if (!at91_rstc_base) { |
| dev_err(&pdev->dev, "Could not map reset controller address\n"); |
| return -ENODEV; |
| } |
| |
| for_each_matching_node(np, at91_ramc_of_match) { |
| at91_ramc_base[idx] = of_iomap(np, 0); |
| if (!at91_ramc_base[idx]) { |
| dev_err(&pdev->dev, "Could not map ram controller address\n"); |
| return -ENODEV; |
| } |
| idx++; |
| } |
| |
| match = of_match_node(at91_reset_of_match, pdev->dev.of_node); |
| at91_restart_nb.notifier_call = match->data; |
| return register_restart_handler(&at91_restart_nb); |
| } |
| |
| static int at91_reset_platform_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *match; |
| struct resource *res; |
| int idx = 0; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| at91_rstc_base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(at91_rstc_base)) { |
| dev_err(&pdev->dev, "Could not map reset controller address\n"); |
| return PTR_ERR(at91_rstc_base); |
| } |
| |
| for (idx = 0; idx < 2; idx++) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 ); |
| at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!at91_ramc_base[idx]) { |
| dev_err(&pdev->dev, "Could not map ram controller address\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| match = platform_get_device_id(pdev); |
| at91_restart_nb.notifier_call = |
| (int (*)(struct notifier_block *, |
| unsigned long, void *)) match->driver_data; |
| |
| return register_restart_handler(&at91_restart_nb); |
| } |
| |
| static int at91_reset_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| if (pdev->dev.of_node) |
| ret = at91_reset_of_probe(pdev); |
| else |
| ret = at91_reset_platform_probe(pdev); |
| |
| if (ret) |
| return ret; |
| |
| at91_reset_status(pdev); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id at91_reset_plat_match[] = { |
| { "at91-sam9260-reset", (unsigned long)at91sam9260_restart }, |
| { "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart }, |
| { /* sentinel */ } |
| }; |
| |
| static struct platform_driver at91_reset_driver = { |
| .probe = at91_reset_probe, |
| .driver = { |
| .name = "at91-reset", |
| .of_match_table = at91_reset_of_match, |
| }, |
| .id_table = at91_reset_plat_match, |
| }; |
| module_platform_driver(at91_reset_driver); |