| /* |
| * A collection of structures, addresses, and values associated with |
| * the Motorola MPC8260ADS/MPC8266ADS-PCI boards. |
| * Copied from the RPX-Classic and SBS8260 stuff. |
| * |
| * Copyright (c) 2001 Dan Malek (dan@mvista.com) |
| */ |
| #ifdef __KERNEL__ |
| #ifndef __MACH_ADS8260_DEFS |
| #define __MACH_ADS8260_DEFS |
| |
| #include <linux/config.h> |
| |
| #include <asm/ppcboot.h> |
| |
| /* Memory map is configured by the PROM startup. |
| * We just map a few things we need. The CSR is actually 4 byte-wide |
| * registers that can be accessed as 8-, 16-, or 32-bit values. |
| */ |
| #define CPM_MAP_ADDR ((uint)0xf0000000) |
| #define BCSR_ADDR ((uint)0xf4500000) |
| #define BCSR_SIZE ((uint)(32 * 1024)) |
| |
| #define BOOTROM_RESTART_ADDR ((uint)0xff000104) |
| |
| /* For our show_cpuinfo hooks. */ |
| #define CPUINFO_VENDOR "Motorola" |
| #define CPUINFO_MACHINE "PQ2 ADS PowerPC" |
| |
| /* The ADS8260 has 16, 32-bit wide control/status registers, accessed |
| * only on word boundaries. |
| * Not all are used (yet), or are interesting to us (yet). |
| */ |
| |
| /* Things of interest in the CSR. |
| */ |
| #define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ |
| #define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ |
| #define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */ |
| #define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ |
| #define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */ |
| #define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */ |
| #define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */ |
| #define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ |
| |
| #define PHY_INTERRUPT SIU_INT_IRQ7 |
| |
| #ifdef CONFIG_PCI |
| /* PCI interrupt controller */ |
| #define PCI_INT_STAT_REG 0xF8200000 |
| #define PCI_INT_MASK_REG 0xF8200004 |
| #define PIRQA (NR_CPM_INTS + 0) |
| #define PIRQB (NR_CPM_INTS + 1) |
| #define PIRQC (NR_CPM_INTS + 2) |
| #define PIRQD (NR_CPM_INTS + 3) |
| |
| /* |
| * PCI memory map definitions for MPC8266ADS-PCI. |
| * |
| * processor view |
| * local address PCI address target |
| * 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch |
| * 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch |
| * 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO |
| * |
| * PCI master view |
| * local address PCI address target |
| * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory |
| */ |
| |
| /* All the other PCI memory map definitions reside at syslib/m82xx_pci.h |
| Here we should redefine what is unique for this board */ |
| #define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ |
| #define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ |
| #define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ |
| |
| #define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ |
| #define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ |
| |
| #if defined(CONFIG_ADS8272) |
| #define PCI_INT_TO_SIU SIU_INT_IRQ2 |
| #elif defined(CONFIG_PQ2FADS) |
| #define PCI_INT_TO_SIU SIU_INT_IRQ6 |
| #else |
| #warning PCI Bridge will be without interrupts support |
| #endif |
| |
| #endif /* CONFIG_PCI */ |
| |
| #endif /* __MACH_ADS8260_DEFS */ |
| #endif /* __KERNEL__ */ |