blob: 39d152ccaa72595b10428242517f6af81a4f25ee [file] [log] [blame]
/*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/wakelock.h>
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/power_supply.h>
#include <linux/sensor/sensors_core.h>
#include "sx9330_wifi_reg.h"
#ifdef CONFIG_MUIC_NOTIFIER
#include <linux/muic/muic.h>
#include <linux/muic/muic_notifier.h>
#endif
#ifdef CONFIG_CCIC_NOTIFIER
#include <linux/ccic/ccic_notifier.h>
#endif
#if defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER)
#include <linux/usb/manager/usb_typec_manager_notifier.h>
#endif
#ifdef TAG
#undef TAG
#define TAG "[GRIP_WIFI]"
#endif
#define VENDOR_NAME "SEMTECH"
#define MODEL_NAME "SX9330_WIFI"
#define MODULE_NAME "grip_sensor_wifi"
#define I2C_M_WR 0 /* for i2c Write */
#define I2c_M_RD 1 /* for i2c Read */
#define IDLE 0
#define ACTIVE 1
#define SX9330_MODE_SLEEP 0
#define SX9330_MODE_NORMAL 1
#define MAIN_SENSOR 1
#define REF_SENSOR 2
#define DIFF_READ_NUM 10
#define GRIP_LOG_TIME 15 /* 30 sec */
/* PH0, PH1, PH2, PH3 */
#define TOTAL_BOTTON_COUNT 1
#define CSX_STATUS_REG SX9330_STAT0_PROXSTAT_PH0_FLAG
#define IRQ_PROCESS_CONDITION (MSK_IRQSTAT_TOUCH \
| MSK_IRQSTAT_RELEASE \
| MSK_IRQSTAT_COMP)
#if defined(CONFIG_FOLDER_HALL)
#define HALLIC_PATH "/sys/class/sec/sec_flip/flipStatus"
#else
#if IS_ENABLED(CONFIG_HALL_NEW_NODE)
#define HALLIC_PATH "/sys/class/sec/hall_ic/hall_detect"
#else
#define HALLIC_PATH "/sys/class/sec/sec_key/hall_detect"
#endif
#endif
struct sx9330_p {
struct i2c_client *client;
struct input_dev *input;
struct device *factory_device;
struct delayed_work init_work;
struct delayed_work irq_work;
struct delayed_work debug_work;
struct wake_lock grip_wake_lock;
struct mutex read_mutex;
#if defined(CONFIG_CCIC_NOTIFIER)
struct notifier_block cpuidle_ccic_nb;
#elif defined(CONFIG_MUIC_NOTIFIER)
struct notifier_block muic_nb;
#endif
bool skip_data;
u8 touchTh;
u8 releaseTh;
int hallic_detect;
int irq;
int gpio_nirq;
int state_ch1;
int init_done;
atomic_t enable;
u16 offset;
s32 capMain;
s32 useful;
s32 avg;
s32 diff;
s32 diff_avg;
int diff_cnt;
s32 useful_avg;
int irq_count;
int abnormal_mode;
s32 max_diff;
s32 max_normal_diff;
int debug_count;
char hall_ic[6];
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
int state_ch2;
u16 offset_ch2;
s32 capMain_ch2;
s32 useful_ch2;
s32 avg_ch2;
s32 diff_ch2;
s32 diff_avg_ch2;
int diff_cnt_ch2;
s32 useful_avg_ch2;
#endif
};
static int sx9330_check_hallic_state(char *file_path, char hall_ic_status[])
{
int iRet = 0;
mm_segment_t old_fs;
struct file *filep;
char hall_sysfs[5];
old_fs = get_fs();
set_fs(KERNEL_DS);
filep = filp_open(file_path, O_RDONLY, 0440);
if (IS_ERR(filep)) {
iRet = PTR_ERR(filep);
pr_err("[SX9330_WIFI]: %s - file open fail %d\n", __func__, iRet);
set_fs(old_fs);
return iRet;
}
iRet = filep->f_op->read(filep, hall_sysfs,
sizeof(hall_sysfs), &filep->f_pos);
if (iRet <= 0) {
pr_err("[SX9330_WIFI]: %s - file read fail %d\n", __func__, iRet);
filp_close(filep, current->files);
set_fs(old_fs);
return -EIO;
} else {
strncpy(hall_ic_status, hall_sysfs, sizeof(hall_sysfs));
}
filp_close(filep, current->files);
set_fs(old_fs);
return iRet;
}
static int sx9330_get_nirq_state(struct sx9330_p *data)
{
return gpio_get_value_cansleep(data->gpio_nirq);
}
static int sx9330_i2c_write_16bit(struct sx9330_p *data, u16 reg_addr, u32 buf)
{
int ret;
struct i2c_msg msg;
unsigned char w_buf[6];
w_buf[0] = (u8)(reg_addr>>8);
w_buf[1] = (u8)(reg_addr);
w_buf[2] = (u8)(buf>>24);
w_buf[3] = (u8)(buf>>16);
w_buf[4] = (u8)(buf>>8);
w_buf[5] = (u8)(buf);
msg.addr = data->client->addr;
msg.flags = I2C_M_WR;
msg.len = 6; // 2bytes regaddr + 4bytes data
msg.buf = (u8 *)w_buf;
ret = i2c_transfer(data->client->adapter, &msg, 1);
if (ret < 0)
pr_err("[SX9330_WIFI]: %s - i2c write error %d\n", __func__, ret);
return ret;
}
static int sx9330_i2c_read_16bit(struct sx9330_p *data, u16 reg_addr, u32 *data32)
{
int ret;
struct i2c_msg msg[2];
u8 w_buf[2];
u8 buf[4];
w_buf[0] = (u8)(reg_addr>>8);
w_buf[1] = (u8)(reg_addr);
msg[0].addr = data->client->addr;
msg[0].flags = I2C_M_WR;
msg[0].len = 2;
msg[0].buf = (u8 *)w_buf;
msg[1].addr = data->client->addr;
msg[1].flags = I2C_M_RD;
msg[1].len = 4;
msg[1].buf = (u8 *)buf;
ret = i2c_transfer(data->client->adapter, msg, 2);
if (ret < 0)
pr_err("[SX9330_WIFI]: %s - i2c read error %d\n", __func__, ret);
data32[0] = ((u32)buf[0]<<24) | ((u32)buf[1]<<16) | ((u32)buf[2]<<8) | ((u32)buf[3]);
return ret;
}
static u8 sx9330_read_irqstate(struct sx9330_p *data)
{
u32 val;
if (sx9330_i2c_read_16bit(data, SX9330_HOSTIRQSRC_REG, &val) >= 0)
return (val & 0x000000FF);
return 0;
}
static void sx9330_initialize_register(struct sx9330_p *data)
{
u32 val32 = 0;
int idx;
for (idx = 0; idx < (int)(ARRAY_SIZE(setup_reg)); idx++) {
sx9330_i2c_write_16bit(data, setup_reg[idx].reg, setup_reg[idx].val);
pr_info("[SX9330_WIFI]: %s - Write Reg: 0x%x Value: 0x%x\n",
__func__, setup_reg[idx].reg, setup_reg[idx].val);
sx9330_i2c_read_16bit(data, setup_reg[idx].reg, &val32);
pr_info("[SX9330_WIFI]: %s - Read Reg: 0x%x Value: 0x%x\n\n",
__func__, setup_reg[idx].reg, val32);
}
data->init_done = ON;
}
static void sx9330_initialize_chip(struct sx9330_p *data)
{
int cnt = 0;
while((sx9330_get_nirq_state(data) == 0) && (cnt++ < 10)) {
sx9330_read_irqstate(data);
msleep(20);
}
if (cnt >= 10)
pr_err("[SX9330_WIFI]: %s - s/w reset fail(%d)\n", __func__, cnt);
sx9330_initialize_register(data);
}
static int sx9330_set_offset_calibration(struct sx9330_p *data)
{
int ret = 0;
u32 retries = 0;
u32 status = 0;
pr_info("[SX9330_WIFI]: %s\n", __func__);
// Before Changing Mode ensure device is not processing a previous
// This timing is very short but good practice to check.
while (retries < 50) {
ret = sx9330_i2c_read_16bit(data, SX9330_TOPSTAT0_REG, &status);
if (ret < 0)
return ret;
// If this is 0, we can issue the next command
if (!(status & MSK_TOPSTAT0_CMDBUSY)) {
pr_info("[SX9330_WIFI]: %s - TOPSTAT0 status: 0x%x, retries: %d\n", __func__, status, retries);
break;
}
usleep_range(2*1000, 2*1000);
retries++;
}
// send compensation
ret = sx9330_i2c_write_16bit(data, SX9330_CMD_REG, I2C_REGCMD_COMPEN);
if (ret < 0)
return ret;
// After sending compensation wait until CONVSTAT=0
retries = 0;
while (retries < 50) {
ret = sx9330_i2c_read_16bit(data, SX9330_STAT1_REG, &status);
if (ret < 0)
return ret;
if (!(status & MSK_STAT1_CONVSTAT)) {
pr_info("[SX9330_WIFI]: %s - STAT1 status: 0x%x, retries: %d\n", __func__, status, retries);
break;
}
usleep_range(2*1000, 2*1000);
retries++;
}
pr_info("[SX9330_WIFI]: %s - done!\n", __func__);
return ret;
}
static void sx9330_send_event(struct sx9330_p *data, int ch, u8 state)
{
if (data->skip_data == true) {
pr_info("[SX9330_WIFI]: %s - skip grip event\n", __func__);
return;
}
if (ch == MAIN_SENSOR) {
if (state == ACTIVE) {
data->state_ch1 = ACTIVE;
pr_info("[SX9330_WIFI]: %s - touched\n", __func__);
} else {
data->state_ch1 = IDLE;
pr_info("[SX9330_WIFI]: %s - released\n", __func__);
}
}
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
else if (ch == REF_SENSOR) {
if (state == ACTIVE) {
data->state_ch2 = ACTIVE;
pr_info("[SX9330_WIFI]: %s - ch2 touched\n", __func__);
} else {
data->state_ch2 = IDLE;
pr_info("[SX9330_WIFI]: %s - ch2 released\n", __func__);
}
}
#endif
switch (ch) {
case MAIN_SENSOR:
if (state == ACTIVE)
input_report_rel(data->input, REL_MISC, 1);
else
input_report_rel(data->input, REL_MISC, 2);
break;
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
case REF_SENSOR:
if (state == ACTIVE)
input_report_rel(data->input, REL_DIAL, 1);
else
input_report_rel(data->input, REL_DIAL, 2);
break;
#endif
default:
break;
}
input_sync(data->input);
}
static void sx9330_display_data_reg(struct sx9330_p *data)
{
u32 val;
u16 reg;
int i;
for (i = 0; i < TOTAL_BOTTON_COUNT; i++) {
pr_info("[SX9330_WIFI]: ############# %d button #############\n", i);
for (reg = SX9330_USEPH0_REG; reg <= SX9330_DIFFPH7_REG; )
{
sx9330_i2c_read_16bit(data, reg, &val);
pr_info("[SX9330_WIFI]: %s - Register(0x%4x) data(0x%8x)\n",
__func__, reg, (val>>10));
reg += 32;
}
}
}
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
static void sx9330_get_ch2_data(struct sx9330_p *data)
{
u8 msBit, msByte, lsByte;
u32 uData = 0;
const int table[16] = {
0, 11000, 16500, 22000, 33000, 38500,
44000, 49500, 55000, 60500, 66000,
71500, 82500, 88000, 93500, 99000};
u32 again_ch2 = 0;
mutex_lock(&data->read_mutex);
/* Calculate out the Reference Cap information */
sx9330_i2c_read_16bit(data, SX9330_USEPH0_REG + REF_SENSOR * 4, &uData);
data->useful_ch2 = (s32)uData >> 10;
if (data->useful_ch2 > 0xFFFFF)
data->useful_ch2 -= 0x1FFFFF;
sx9330_i2c_read_16bit(data, SX9330_OFFSETPH0_REG + REF_SENSOR * 8, &uData);
data->offset_ch2 = uData & 0x7FFF;
msBit = (u8)((data->offset_ch2 >> 14) & 0x1);
msByte = (u8)((data->offset_ch2 >> 7) & 0x7F);
lsByte = (u8)((data->offset_ch2) & 0xFF);
/* read analog gain */
sx9330_i2c_read_16bit(data, SX9330_AFEPARAMSPH0_REG + REF_SENSOR * 8,
&again_ch2);
again_ch2 = (again_ch2 & 0x1E00) >> 9;
if(again_ch2 == 0)
again_ch2 = 1;
/* Ctotal = Coffset + Cuseful */
data->capMain_ch2 = (((s32)msBit * 1060800) + ((s32)msByte * 21200) +
((s32)lsByte * 500)) + ((s32)data->useful_ch2 * table[again_ch2] / 1048575);
/* avg read */
sx9330_i2c_read_16bit(data, SX9330_AVGPH0_REG + REF_SENSOR * 4, &uData);
data->avg_ch2 = (s32)uData >> 10;
if (data->avg_ch2 > 0xFFFFF)
data->avg_ch2 -= 0x1FFFFF;
/* diff read */
sx9330_i2c_read_16bit(data, SX9330_DIFFPH0_REG + REF_SENSOR * 4, &uData);
data->diff_ch2 = (s32)uData >> 10;
if (data->diff_ch2 > 0xFFFFF)
data->diff_ch2 -= 0x1FFFFF;
mutex_unlock(&data->read_mutex);
pr_info("[SX9330_WIFI]: %s - [CH2] CapsMain: %ld, useful: %ld, avg: %ld, diff: %ld, Offset: %u\n",
__func__, (long int)data->capMain_ch2, (long int)data->useful_ch2,
(long int)data->avg_ch2, (long int)data->diff_ch2, data->offset_ch2);
}
#endif
static void sx9330_get_data(struct sx9330_p *data)
{
u8 msBit, msByte, lsByte;
u32 uData = 0;
const int table[16] = {
0, 11000, 16500, 22000, 33000, 38500,
44000, 49500, 55000, 60500, 66000,
71500, 82500, 88000, 93500, 99000};
u32 again = 0;
s32 cOffset = 0;
s64 cUseful = 0;
mutex_lock(&data->read_mutex);
/* Calculate out the Main Cap information */
sx9330_i2c_read_16bit(data, SX9330_USEPH0_REG + MAIN_SENSOR * 4, &uData);
data->useful = (s32)uData >> 10;
if (data->useful > 0xFFFFF)
data->useful -= 0x1FFFFF;
sx9330_i2c_read_16bit(data, SX9330_OFFSETPH0_REG + MAIN_SENSOR * 8, &uData);
data->offset = uData & 0x7FFF;
msBit = (u8)((data->offset >> 14) & 0x1);
msByte = (u8)((data->offset >> 7) & 0x7F);
lsByte = (u8)((data->offset) & 0x7F);
/* read analog gain */
sx9330_i2c_read_16bit(data, SX9330_AFEPARAMSPH0_REG + MAIN_SENSOR * 8,
&again);
again = (again & 0x1E00) >> 9;
if(again == 0)
again = 1;
cUseful = ((s64)data->useful * table[again]);
cUseful = (s32)(cUseful / 1048575);
cOffset = ((s32)msBit * 1060800) + ((s32)msByte * 22100) +
((s32)lsByte * 500);
/* Ctotal = Coffset + Cuseful */
data->capMain = cOffset + cUseful;
/* avg read */
sx9330_i2c_read_16bit(data, SX9330_AVGPH0_REG + MAIN_SENSOR * 4, &uData);
data->avg = (s32)uData >> 10;
if (data->avg > 0xFFFFF)
data->avg -= 0x1FFFFF;
/* diff read */
sx9330_i2c_read_16bit(data, SX9330_DIFFPH0_REG + MAIN_SENSOR * 4, &uData);
data->diff = (s32)uData >> 10;
if (data->diff > 0xFFFFF)
data->diff -= 0x1FFFFF;
mutex_unlock(&data->read_mutex);
pr_info("[SX9330_WIFI]: %s - CapsMain: %ld, useful: %ld, avg: %ld, diff: %ld, Offset: %u\n",
__func__, (long int)data->capMain, (long int)data->useful,
(long int)data->avg, (long int)data->diff, data->offset);
}
static int sx9330_set_mode(struct sx9330_p *data, unsigned char mode)
{
int ret = -EINVAL;
u32 retries = 0;
u32 status = 0;
// Before Changing Mode ensure device is not processing a previous
// This timing is very short but good practice to check.
while (retries < 50) {
ret = sx9330_i2c_read_16bit(data, SX9330_TOPSTAT0_REG, &status);
if (ret < 0) {
pr_info("[SX9330_WIFI]: %s - change the mode : %u FAILED reading TOPSTAT0!!\n", __func__, mode);
return ret;
}
// If this is 0, we can issue the next command
if (!(status & MSK_TOPSTAT0_CMDBUSY))
break;
usleep_range(2*1000, 2*1000);
retries++;
}
if (mode == SX9330_MODE_SLEEP) {
ret = sx9330_i2c_write_16bit(data, SX9330_CMD_REG,
I2C_REGCMD_EN_SLEEP);
} else if (mode == SX9330_MODE_NORMAL) {
ret = sx9330_i2c_write_16bit(data, SX9330_CMD_REG,
I2C_REGCMD_PHEN);
}
// After sending compensation wait until CONVSTAT=0
retries = 0;
while (retries < 50) {
ret = sx9330_i2c_read_16bit(data, SX9330_STAT1_REG, &status);
if (ret < 0) {
pr_info("[SX9330_WIFI]: %s - change the mode : %u FAILED reading STAT1!!\n", __func__, mode);
return ret;
}
if (!(status & MSK_STAT1_CONVSTAT))
break;
usleep_range(2*1000, 2*1000);
retries++;
}
// complete the original command that was sent after NORMAL mode change
if (mode == SX9330_MODE_NORMAL)
sx9330_set_offset_calibration(data);
pr_info("[SX9330_WIFI]: %s - change the mode : %u\n", __func__, mode);
return ret;
}
static void sx9330_check_status(struct sx9330_p *data, int enable)
{
u32 status = 0;
sx9330_i2c_read_16bit(data, SX9330_STAT0_REG, &status);
status = status >> 24;
pr_info("[SX9330_WIFI]: %s - (status: 0x%x)\n", __func__, status);
if (data->skip_data == true) {
input_report_rel(data->input, REL_MISC, 2);
input_sync(data->input);
return;
}
if (status & (CSX_STATUS_REG << MAIN_SENSOR)) {
sx9330_send_event(data, MAIN_SENSOR, ACTIVE);
} else {
sx9330_send_event(data, MAIN_SENSOR, IDLE);
}
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
if (status & (CSX_STATUS_REG << REF_SENSOR)) {
sx9330_send_event(data, REF_SENSOR, ACTIVE);
} else {
sx9330_send_event(data, REF_SENSOR, IDLE);
}
#endif
}
static void sx9330_set_enable(struct sx9330_p *data, int enable)
{
u8 status = 0;
u32 val32 = 0;
int idx;
pr_info("[SX9330_WIFI]: %s\n", __func__);
if (enable) {
pr_info("[SX9330_WIFI]: %s - enable(status : 0x%x)\n",
__func__, status);
data->diff_avg = 0;
data->diff_cnt = 0;
data->useful_avg = 0;
sx9330_get_data(data);
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
data->diff_avg_ch2 = 0;
data->diff_cnt_ch2 = 0;
data->useful_avg_ch2 = 0;
sx9330_get_ch2_data(data);
#endif
sx9330_check_status(data, enable);
/*
* for debugging error case
*/
if (data->capMain == 0 || data->offset == 0) {
for (idx = 0; idx < (int)(ARRAY_SIZE(setup_reg)); idx++) {
sx9330_i2c_read_16bit(data, setup_reg[idx].reg, &val32);
pr_info("[SX9330_WIFI]: %s - Read Reg: 0x%x Value: 0x%x\n",
__func__, setup_reg[idx].reg, val32);
}
}
msleep(20);
/*
* make sure no interrupts are pending since enabling irq
* will only work on next falling edge
*/
sx9330_read_irqstate(data);
/*
* enable interrupt
*/
sx9330_i2c_write_16bit(data, SX9330_HOSTIRQMSK_REG, 0x70);
enable_irq(data->irq);
enable_irq_wake(data->irq);
} else {
pr_info("[SX9330_WIFI]: %s - disable\n", __func__);
/*
* disable interrupt
*/
sx9330_i2c_write_16bit(data, SX9330_HOSTIRQMSK_REG, 0x00);
disable_irq(data->irq);
disable_irq_wake(data->irq);
}
}
static void sx9330_set_debug_work(struct sx9330_p *data, u8 enable,
unsigned int time_ms)
{
if (enable == ON) {
data->debug_count = 0;
schedule_delayed_work(&data->debug_work,
msecs_to_jiffies(time_ms));
} else {
cancel_delayed_work_sync(&data->debug_work);
}
}
static ssize_t sx9330_get_offset_calibration_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 val = 0;
struct sx9330_p *data = dev_get_drvdata(dev);
sx9330_i2c_read_16bit(data, SX9330_HOSTIRQSRC_REG, &val);
return snprintf(buf, PAGE_SIZE, "%d\n", val);
}
static ssize_t sx9330_set_offset_calibration_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long val;
struct sx9330_p *data = dev_get_drvdata(dev);
if (kstrtoul(buf, 10, &val)) {
pr_err("[SX9330_WIFI]: %s - Invalid Argument\n", __func__);
return -EINVAL;
}
if (val)
sx9330_set_offset_calibration(data);
return count;
}
static ssize_t sx9330_register_write_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int regist = 0, val = 0;
struct sx9330_p *data = dev_get_drvdata(dev);
if (sscanf(buf, "%6x,%10x", &regist, &val) != 2) {
pr_err("[SX9330_WIFI]: %s - The number of data are wrong\n",
__func__);
return -EINVAL;
}
sx9330_i2c_write_16bit(data, (u16)regist, (u32)val);
pr_info("[SX9330_WIFI]: %s - Register(0x%2x) data(0x%4x)\n",
__func__, regist, val);
return count;
}
static ssize_t sx9330_register_read_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int offset = 0;
u32 val = 0;
int idx;
struct sx9330_p *data = dev_get_drvdata(dev);
for (idx = 0; idx < (int)(ARRAY_SIZE(setup_reg)); idx++) {
sx9330_i2c_read_16bit(data, setup_reg[idx].reg, &val);
pr_info("[SX9330]: %s - Read Reg: 0x%x Value: 0x%x\n\n",
__func__, setup_reg[idx].reg, val);
offset += snprintf(buf + offset, PAGE_SIZE - offset,
"Reg: 0x%x Value: 0x%08x\n", setup_reg[idx].reg, val);
}
return offset;
}
static ssize_t sx9330_read_data_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
sx9330_display_data_reg(data);
return snprintf(buf, PAGE_SIZE, "%d\n", 0);
}
static ssize_t sx9330_sw_reset_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
pr_info("[SX9330_WIFI]: %s\n", __func__);
sx9330_set_offset_calibration(data);
msleep(400);
sx9330_get_data(data);
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
sx9330_get_ch2_data(data);
#endif
return snprintf(buf, PAGE_SIZE, "%d\n", 0);
}
static ssize_t sx9330_vendor_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", VENDOR_NAME);
}
static ssize_t sx9330_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", MODEL_NAME);
}
static ssize_t sx9330_touch_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "1\n");
}
static ssize_t sx9330_raw_data_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
static s32 sum_diff;
struct sx9330_p *data = dev_get_drvdata(dev);
sx9330_get_data(data);
if (data->diff_cnt == 0)
sum_diff = data->diff;
else
sum_diff += data->diff;
if (++data->diff_cnt >= DIFF_READ_NUM) {
data->diff_avg = sum_diff / DIFF_READ_NUM;
data->useful_avg = sum_diff / DIFF_READ_NUM;
data->diff_cnt = 0;
}
return snprintf(buf, PAGE_SIZE, "%ld,%ld,%u,%ld,%ld\n", (long int)data->capMain,
(long int)data->useful, data->offset, (long int)data->diff, (long int)data->avg);
}
static ssize_t sx9330_diff_avg_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)data->diff_avg);
}
static ssize_t sx9330_useful_avg_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)data->useful_avg);
}
static ssize_t sx9330_avgnegfilt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 avgnegfilt = 0;
sx9330_i2c_read_16bit(data, SX9330_AVGBFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &avgnegfilt);
avgnegfilt = (avgnegfilt & 0x3800) >> 11;
if (avgnegfilt == 7)
return snprintf(buf, PAGE_SIZE, "1\n");
else if (avgnegfilt > 0 && avgnegfilt < 7)
return snprintf(buf, PAGE_SIZE, "1-1/%d\n", 1 << avgnegfilt);
else if (avgnegfilt == 0)
return snprintf(buf, PAGE_SIZE, "0\n");
return snprintf(buf, PAGE_SIZE, "not set\n");
}
static ssize_t sx9330_avgposfilt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 avgposfilt = 0;
sx9330_i2c_read_16bit(data, SX9330_AVGBFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &avgposfilt);
avgposfilt = (avgposfilt & 0x700) >> 8;
switch (avgposfilt) {
case 0x00:
return snprintf(buf, PAGE_SIZE, "0\n");
case 0x01:
return snprintf(buf, PAGE_SIZE, "1-1/16\n");
case 0x02:
return snprintf(buf, PAGE_SIZE, "1-1/64\n");
case 0x03:
return snprintf(buf, PAGE_SIZE, "1-1/128\n");
case 0x04:
return snprintf(buf, PAGE_SIZE, "1-1/256\n");
case 0x05:
return snprintf(buf, PAGE_SIZE, "1-1/512\n");
case 0x06:
return snprintf(buf, PAGE_SIZE, "1-1/1024\n");
case 0x07:
return snprintf(buf, PAGE_SIZE, "1\n");
default:
break;
}
return snprintf(buf, PAGE_SIZE, "not set\n");
}
static ssize_t sx9330_gain_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "None\n");
}
static ssize_t sx9330_range_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "None\n");
}
static ssize_t sx9330_avgthresh_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 avgthresh = 0;
sx9330_i2c_read_16bit(data, SX9330_AVGBFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &avgthresh);
avgthresh = (avgthresh & 0x3F000000) >> 24;
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)(16384 * avgthresh));
}
static ssize_t sx9330_rawfilt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 rawfilt = 0;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &rawfilt);
rawfilt = (rawfilt & 0x700000) >> 20;
if (rawfilt > 0 && rawfilt < 8)
return snprintf(buf, PAGE_SIZE, "1-1/%d\n", 1 << rawfilt);
else if (rawfilt == 0)
return snprintf(buf, PAGE_SIZE, "0\n");
return snprintf(buf, PAGE_SIZE, "not set\n");
}
static ssize_t sx9330_sampling_freq_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 sampling_freq = 0;
const char *table[32] = {
"250", "200", "166.67", "142.86", "125", "111.11", "100",
"90.91", "83.33", "76.92", "71.43", "66.67", "62.50", "58.82",
"55.56", "52.63", "50", "45.45", "41.67", "38.46", "35.71",
"31.25", "27.78", "25", "20.83", "17.86", "13.89", "11.36",
"8.33", "6.58", "5.43", "4.63"};
sx9330_i2c_read_16bit(data, SX9330_AFEPARAMSPH0_REG + MAIN_SENSOR * 8,
&sampling_freq);
sampling_freq = (sampling_freq & 0xF8) >> 3;
if (sampling_freq > 31)
return snprintf(buf, PAGE_SIZE, "not set\n");
return snprintf(buf, PAGE_SIZE, "%skHz\n", table[sampling_freq]);
}
static ssize_t sx9330_scan_period_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
s32 scan_period = 0;
sx9330_i2c_read_16bit(data, SX9330_SCANPERIOD_REG, &scan_period);
scan_period = (s32)(scan_period & 0x7FF);
scan_period = (s32)((scan_period << 11) / 1000);
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)scan_period);
}
static ssize_t sx9330_again_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
const char *table[16] = {
"Reserved", "+/-1.1", "+/-1.65", "+/-2.2",
"+/-3.3", "+/-3.85", "+/-4.4", "+/-4.95",
"+/-5.5", "+/-6.05", "+/-6.6F", "+/-7.15",
"+/-8.25", "+/-8.8", "+/-9.35", "+/-9.9"};
u32 again = 0;
sx9330_i2c_read_16bit(data, SX9330_AFEPARAMSPH0_REG + MAIN_SENSOR * 8,
&again);
again = (again & 0x1E00) >> 9;
return snprintf(buf, PAGE_SIZE, "%spF\n", table[again]);
}
static ssize_t sx9330_phase_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", MAIN_SENSOR);
}
static ssize_t sx9330_hysteresis_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
const char *table[4] = {"None", "+/-6%", "+/-12%", "+/-25%"};
u32 hyst = 0;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &hyst);
hyst = (hyst & 0x30) >> 4;
return snprintf(buf, PAGE_SIZE, "%s\n", table[hyst]);
}
static ssize_t sx9330_irq_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
int result = 0;
s32 max_diff_val = 0;
if (data->irq_count) {
result = -1;
max_diff_val = data->max_diff;
} else {
max_diff_val = data->max_normal_diff;
}
pr_info("[SX9330_WIFI]: %s - called\n", __func__);
return snprintf(buf, PAGE_SIZE, "%d,%d,%d\n",
result, data->irq_count, max_diff_val);
}
static ssize_t sx9330_irq_count_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u8 onoff;
int ret;
ret = kstrtou8(buf, 10, &onoff);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - kstrtou8 failed.(%d)\n", __func__, ret);
return count;
}
mutex_lock(&data->read_mutex);
if (onoff == 0) {
data->abnormal_mode = OFF;
} else if (onoff == 1) {
data->abnormal_mode = ON;
data->irq_count = 0;
data->max_diff = 0;
data->max_normal_diff = 0;
} else {
pr_err("[SX9330_WIFI]: %s - unknown value %d\n", __func__, onoff);
}
mutex_unlock(&data->read_mutex);
pr_info("[SX9330_WIFI]: %s - %d\n", __func__, onoff);
return count;
}
static ssize_t sx9330_normal_threshold_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 threshold = 0;
u32 hyst = 0;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &threshold);
threshold = (threshold & 0xFF00) >> 8;
threshold = threshold * threshold / 2;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &hyst);
hyst = (hyst & 0x30) >> 4;
switch (hyst) {
case 0x01: /* 6% */
hyst = threshold >> 4;
break;
case 0x02: /* 12% */
hyst = threshold >> 3;
break;
case 0x03: /* 25% */
hyst = threshold >> 2;
break;
default:
/* None */
break;
}
return snprintf(buf, PAGE_SIZE, "%d,%d\n",
threshold + hyst, threshold - hyst);
}
static ssize_t sx9330_onoff_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%u\n", !data->skip_data);
}
static ssize_t sx9330_onoff_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
u8 val;
int ret;
struct sx9330_p *data = dev_get_drvdata(dev);
ret = kstrtou8(buf, 2, &val);
if (ret) {
pr_err("[SX9330_WIFI]: %s - Invalid Argument\n", __func__);
return ret;
}
if (val == 0) {
data->skip_data = true;
if (atomic_read(&data->enable) == ON) {
data->state_ch1 = IDLE;
input_report_rel(data->input, REL_MISC, 2);
input_sync(data->input);
}
} else {
data->skip_data = false;
}
pr_info("[SX9330_WIFI]: %s -%u\n", __func__, val);
return count;
}
static ssize_t sx9330_resolution_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 resolution = 0;
sx9330_i2c_read_16bit(data,
SX9330_AFEPARAMSPH0_REG + MAIN_SENSOR*8, &resolution);
resolution = resolution & 0x7;
return snprintf(buf, PAGE_SIZE, "%d\n", 1 << (resolution + 3));
}
static ssize_t sx9330_adc_filt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 adc_filt = 0;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &adc_filt);
adc_filt = (adc_filt & 0xC0000) >> 18;
return snprintf(buf, PAGE_SIZE, "%d\n", 1 << adc_filt);
}
static ssize_t sx9330_useful_filt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 useful_filt = 0;
sx9330_i2c_read_16bit(data, SX9330_AVGAFILTPH0_REG +
(1 << (4 + MAIN_SENSOR)), &useful_filt);
useful_filt = (useful_filt & 0x1000) >> 12;
return snprintf(buf, PAGE_SIZE, "%s\n", useful_filt ? "on" : "off");
}
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
static ssize_t sx9330_ch_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "2\n");
}
static ssize_t sx9330_gain_ch2_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "None\n");
}
static ssize_t sx9330_raw_data_ch2_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
static s32 sum_diff;
struct sx9330_p *data = dev_get_drvdata(dev);
sx9330_get_ch2_data(data);
if (data->diff_cnt_ch2 == 0)
sum_diff = data->diff_ch2;
else
sum_diff += data->diff_ch2;
if (++data->diff_cnt_ch2 >= DIFF_READ_NUM) {
data->diff_avg_ch2 = sum_diff / DIFF_READ_NUM;
data->useful_avg_ch2 = sum_diff / DIFF_READ_NUM;
data->diff_cnt_ch2 = 0;
}
return snprintf(buf, PAGE_SIZE, "%ld,%ld,%u,%ld,%ld\n", (long int)data->capMain_ch2,
(long int)data->useful_ch2, data->offset_ch2, (long int)data->diff_ch2, (long int)data->avg_ch2);
}
static ssize_t sx9330_normal_ch2_threshold_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
u32 threshold = 0;
u32 hyst = 0;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + REF_SENSOR)), &threshold);
threshold = (threshold & 0xFF00) >> 8;
threshold = threshold * threshold / 2;
sx9330_i2c_read_16bit(data, SX9330_ADCFILTPH0_REG +
(1 << (4 + REF_SENSOR)), &hyst);
hyst = (hyst & 0x30) >> 4;
switch (hyst) {
case 0x01: /* 6% */
hyst = threshold >> 4;
break;
case 0x02: /* 12% */
hyst = threshold >> 3;
break;
case 0x03: /* 25% */
hyst = threshold >> 2;
break;
default:
/* None */
break;
}
return snprintf(buf, PAGE_SIZE, "%d,%d\n",
threshold + hyst, threshold - hyst);
}
static ssize_t sx9330_diff_avg_ch2_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)data->diff_avg_ch2);
}
static ssize_t sx9330_useful_avg_ch2_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%ld\n", (long int)data->useful_avg_ch2);
}
#endif
static DEVICE_ATTR(menual_calibrate, S_IRUGO | S_IWUSR | S_IWGRP,
sx9330_get_offset_calibration_show,
sx9330_set_offset_calibration_store);
static DEVICE_ATTR(register_write,0220,
NULL, sx9330_register_write_store);
static DEVICE_ATTR(register_read, 0444,
sx9330_register_read_show, NULL);
static DEVICE_ATTR(readback, S_IRUGO, sx9330_read_data_show, NULL);
static DEVICE_ATTR(reset, S_IRUGO, sx9330_sw_reset_show, NULL);
static DEVICE_ATTR(name, S_IRUGO, sx9330_name_show, NULL);
static DEVICE_ATTR(vendor, S_IRUGO, sx9330_vendor_show, NULL);
static DEVICE_ATTR(mode, S_IRUGO, sx9330_touch_mode_show, NULL);
static DEVICE_ATTR(raw_data, S_IRUGO, sx9330_raw_data_show, NULL);
static DEVICE_ATTR(diff_avg, 0444, sx9330_diff_avg_show, NULL);
static DEVICE_ATTR(useful_avg, 0444, sx9330_useful_avg_show, NULL);
static DEVICE_ATTR(onoff, S_IRUGO | S_IWUSR | S_IWGRP,
sx9330_onoff_show, sx9330_onoff_store);
static DEVICE_ATTR(normal_threshold, 0444,
sx9330_normal_threshold_show, NULL);
static DEVICE_ATTR(avg_negfilt, 0444, sx9330_avgnegfilt_show, NULL);
static DEVICE_ATTR(avg_posfilt, 0444, sx9330_avgposfilt_show, NULL);
static DEVICE_ATTR(avg_thresh, 0444, sx9330_avgthresh_show, NULL);
static DEVICE_ATTR(rawfilt, 0444, sx9330_rawfilt_show, NULL);
static DEVICE_ATTR(sampling_freq, 0444, sx9330_sampling_freq_show, NULL);
static DEVICE_ATTR(scan_period, 0444, sx9330_scan_period_show, NULL);
static DEVICE_ATTR(gain, 0444, sx9330_gain_show, NULL);
static DEVICE_ATTR(range, 0444, sx9330_range_show, NULL);
static DEVICE_ATTR(analog_gain, 0444, sx9330_again_show, NULL);
static DEVICE_ATTR(phase, 0444, sx9330_phase_show, NULL);
static DEVICE_ATTR(hysteresis, 0444, sx9330_hysteresis_show, NULL);
static DEVICE_ATTR(irq_count, 0664,
sx9330_irq_count_show, sx9330_irq_count_store);
static DEVICE_ATTR(resolution, 0444, sx9330_resolution_show, NULL);
static DEVICE_ATTR(adc_filt, 0444, sx9330_adc_filt_show, NULL);
static DEVICE_ATTR(useful_filt, 0444, sx9330_useful_filt_show, NULL);
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
static DEVICE_ATTR(ch_count, 0444, sx9330_ch_count_show, NULL);
static DEVICE_ATTR(gain_ch2, 0444, sx9330_gain_ch2_show, NULL);
static DEVICE_ATTR(raw_data_ch2, 0444, sx9330_raw_data_ch2_show, NULL);
static DEVICE_ATTR(normal_threshold_ch2, 0444,
sx9330_normal_ch2_threshold_show, NULL);
static DEVICE_ATTR(diff_avg_ch2, 0444, sx9330_diff_avg_ch2_show, NULL);
static DEVICE_ATTR(useful_avg_ch2, 0444, sx9330_useful_avg_ch2_show, NULL);
#endif
static struct device_attribute *sensor_attrs[] = {
&dev_attr_menual_calibrate,
&dev_attr_register_write,
&dev_attr_register_read,
&dev_attr_readback,
&dev_attr_reset,
&dev_attr_name,
&dev_attr_vendor,
&dev_attr_mode,
&dev_attr_raw_data,
&dev_attr_diff_avg,
&dev_attr_useful_avg,
&dev_attr_onoff,
&dev_attr_normal_threshold,
&dev_attr_avg_negfilt,
&dev_attr_avg_posfilt,
&dev_attr_avg_thresh,
&dev_attr_rawfilt,
&dev_attr_sampling_freq,
&dev_attr_scan_period,
&dev_attr_gain,
&dev_attr_range,
&dev_attr_analog_gain,
&dev_attr_phase,
&dev_attr_hysteresis,
&dev_attr_irq_count,
&dev_attr_resolution,
&dev_attr_adc_filt,
&dev_attr_useful_filt,
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
&dev_attr_ch_count,
&dev_attr_gain_ch2,
&dev_attr_raw_data_ch2,
&dev_attr_normal_threshold_ch2,
&dev_attr_diff_avg_ch2,
&dev_attr_useful_avg_ch2,
#endif
NULL,
};
/*****************************************************************************/
static ssize_t sx9330_enable_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
u8 enable;
int ret;
struct sx9330_p *data = dev_get_drvdata(dev);
int pre_enable = atomic_read(&data->enable);
ret = kstrtou8(buf, 2, &enable);
if (ret) {
pr_err("[SX9330_WIFI]: %s - Invalid Argument\n", __func__);
return ret;
}
pr_info("[SX9330_WIFI]: %s - new_value = %u old_value = %d\n",
__func__, enable, pre_enable);
if (pre_enable == enable)
return size;
atomic_set(&data->enable, enable);
sx9330_set_enable(data, (int)enable);
return size;
}
static ssize_t sx9330_enable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sx9330_p *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&data->enable));
}
static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
sx9330_enable_show, sx9330_enable_store);
static struct attribute *sx9330_attributes[] = {
&dev_attr_enable.attr,
NULL
};
static struct attribute_group sx9330_attribute_group = {
.attrs = sx9330_attributes
};
static void sx9330_touch_process(struct sx9330_p *data)
{
u32 status = 0;
sx9330_i2c_read_16bit(data, SX9330_STAT0_REG, &status);
status = status >> 24;
pr_info("[SX9330_WIFI]: %s - (status: 0x%x)\n", __func__, status);
sx9330_get_data(data);
if (data->abnormal_mode) {
if (status & (CSX_STATUS_REG << MAIN_SENSOR)) {
if (data->max_diff < data->diff)
data->max_diff = data->diff;
data->irq_count++;
}
}
if (data->state_ch1 == IDLE) {
if (status & (CSX_STATUS_REG << MAIN_SENSOR))
sx9330_send_event(data, MAIN_SENSOR, ACTIVE);
else
pr_info("[SX9330_WIFI]: %s - 0x%x already released.\n",
__func__, status);
} else { // User released
if (!(status & (CSX_STATUS_REG << MAIN_SENSOR)))
sx9330_send_event(data, MAIN_SENSOR, IDLE);
else
pr_info("[SX9330_WIFI]: %s - 0x%x still touched\n",
__func__, status);
}
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
sx9330_get_ch2_data(data);
if (data->state_ch2 == IDLE) {
if (status & (CSX_STATUS_REG << REF_SENSOR))
sx9330_send_event(data, REF_SENSOR, ACTIVE);
else
pr_info("[SX9330_WIFI]: %s - 0x%x ch2 already released.\n",
__func__, status);
} else { // User released
if (!(status & (CSX_STATUS_REG << REF_SENSOR)))
sx9330_send_event(data, REF_SENSOR, IDLE);
else
pr_info("[SX9330_WIFI]: %s - 0x%x ch2 still touched\n",
__func__, status);
}
#endif
}
static void sx9330_process_interrupt(struct sx9330_p *data)
{
u8 status = 0;
/* since we are not in an interrupt don't need to disable irq. */
status = sx9330_read_irqstate(data);
if (status & IRQ_PROCESS_CONDITION) {
sx9330_touch_process(data);
} else {
pr_info("[SX9330_WIFI]: %s interrupt generated but skip - status : %d\n",
__func__, status);
}
}
static void sx9330_init_work_func(struct work_struct *work)
{
struct sx9330_p *data = container_of((struct delayed_work *)work,
struct sx9330_p, init_work);
int retry = 0;
sx9330_initialize_chip(data);
sx9330_set_mode(data, SX9330_MODE_NORMAL);
/* make sure no interrupts are pending since enabling irq
* will only work on next falling edge */
sx9330_read_irqstate(data);
msleep(20);
while(retry++ < 10) {
sx9330_get_data(data);
/* Defence code */
if (data->capMain == 0 && data->avg == 0 && data->diff == 0
&& data->useful == 0 && data->offset == 0) {
pr_info("[SX9330]: Defence code for grip sensor - retry: %d\n", retry);
sx9330_i2c_write_16bit(data, SX9330_RESET_REG, I2C_SOFTRESET_VALUE);
msleep(300);
sx9330_initialize_chip(data);
sx9330_set_mode(data, SX9330_MODE_NORMAL);
sx9330_read_irqstate(data);
msleep(20);
} else {
break;
}
}
}
static void sx9330_irq_work_func(struct work_struct *work)
{
struct sx9330_p *data = container_of((struct delayed_work *)work,
struct sx9330_p, irq_work);
if (sx9330_get_nirq_state(data) == 0)
sx9330_process_interrupt(data);
else
pr_err("[SX9330_WIFI]: %s - nirq read high %d\n",
__func__, sx9330_get_nirq_state(data));
}
static void sx9330_debug_work_func(struct work_struct *work)
{
struct sx9330_p *data = container_of((struct delayed_work *)work,
struct sx9330_p, debug_work);
static int hall_flag = 1;
#if defined(CONFIG_FOLDER_HALL)
char str[2] = "0";
#else
char str[6] = "CLOSE";
#endif
if (data->hallic_detect) {
sx9330_check_hallic_state(HALLIC_PATH, data->hall_ic);
data->hall_ic[sizeof(str)-1] = '\0';
if (strcmp(data->hall_ic, str) == 0) {
if (hall_flag) {
pr_info("[SX9330_WIFI]: %s - hall IC is closed\n", __func__);
sx9330_set_offset_calibration(data);
hall_flag = 0;
}
} else {
hall_flag = 1;
}
}
if (atomic_read(&data->enable) == ON) {
if (data->abnormal_mode) {
sx9330_get_data(data);
if (data->max_normal_diff < data->diff)
data->max_normal_diff = data->diff;
} else {
if (data->debug_count >= GRIP_LOG_TIME) {
sx9330_get_data(data);
data->debug_count = 0;
} else {
data->debug_count++;
}
}
}
schedule_delayed_work(&data->debug_work, msecs_to_jiffies(2000));
}
static irqreturn_t sx9330_interrupt_thread(int irq, void *pdata)
{
struct sx9330_p *data = pdata;
wake_lock_timeout(&data->grip_wake_lock, 3 * HZ);
schedule_delayed_work(&data->irq_work, msecs_to_jiffies(100));
return IRQ_HANDLED;
}
static int sx9330_input_init(struct sx9330_p *data)
{
int ret = 0;
struct input_dev *dev = NULL;
/* Create the input device */
dev = input_allocate_device();
if (!dev)
return -ENOMEM;
dev->name = MODULE_NAME;
dev->id.bustype = BUS_I2C;
input_set_capability(dev, EV_REL, REL_MISC);
input_set_capability(dev, EV_REL, REL_DIAL);
input_set_drvdata(dev, data);
ret = input_register_device(dev);
if (ret < 0) {
input_free_device(dev);
return ret;
}
ret = sensors_create_symlink(&dev->dev.kobj, dev->name);
if (ret < 0) {
input_unregister_device(dev);
return ret;
}
ret = sysfs_create_group(&dev->dev.kobj, &sx9330_attribute_group);
if (ret < 0) {
sensors_remove_symlink(&dev->dev.kobj, dev->name);
input_unregister_device(dev);
return ret;
}
/* save the input pointer and finish initialization */
data->input = dev;
return 0;
}
static int sx9330_setup_pin(struct sx9330_p *data)
{
int ret;
ret = gpio_request(data->gpio_nirq, "SX9330_wifi_nIRQ");
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - gpio %d request failed (%d)\n",
__func__, data->gpio_nirq, ret);
return ret;
}
ret = gpio_direction_input(data->gpio_nirq);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - failed to set gpio %d as input (%d)\n",
__func__, data->gpio_nirq, ret);
gpio_free(data->gpio_nirq);
return ret;
}
return 0;
}
#if 0
static void sx9330_set_specific_register(int regi_num, int end, int start,
u8 val)
{
u16 clear_bit = 0x00;
unsigned char temp_val;
temp_val = setup_reg[regi_num].val;
clear_bit = ~((1 << (end + 1)) - (1 << start));
temp_val = (temp_val & clear_bit) | (val << start);
setup_reg[regi_num].val = temp_val;
}
#endif
static void sx9330_initialize_variable(struct sx9330_p *data)
{
data->init_done = OFF;
data->skip_data = false;
data->state_ch1 = IDLE;
#ifdef CONFIG_SENSORS_SX9330_WIFI_2CH
data->state_ch2 = IDLE;
#endif
atomic_set(&data->enable, OFF);
}
static int sx9330_read_setupreg(struct device_node *dnode, char *str, u32 *val)
{
u32 temp_val;
int ret;
ret = of_property_read_u32(dnode, str, &temp_val);
if (!ret)
*val = temp_val;
else
pr_err("[SX9330_WIFI]: %s - %s: property read err 0x%08x (%d)\n",
__func__, str, temp_val, ret);
return ret;
}
static int sx9330_parse_dt(struct sx9330_p *data, struct device *dev)
{
struct device_node *node = dev->of_node;
enum of_gpio_flags flags;
int ret;
u32 scanperiod;
u32 gnrlctrl2;
u32 adcfiltph0, adcfiltph1;
u32 afeparamsph0, afeparamsph1;
u32 afephph0;
u32 avgbfilt;
u32 avgafilt;
u32 refcorra;
u32 advdig3, advdig4;
if (node == NULL)
return -ENODEV;
data->gpio_nirq = of_get_named_gpio_flags(node,
"sx9330_wifi,nirq-gpio", 0, &flags);
if (data->gpio_nirq < 0) {
pr_err("[SX9330_WIFI]: %s - get gpio_nirq error\n", __func__);
return -ENODEV;
}
if (!sx9330_read_setupreg(node, SX9330_SCANPERIOD, &scanperiod))
setup_reg[SX9330_SCANPERIOD_REG_IDX].val = scanperiod;
if (!sx9330_read_setupreg(node, SX9330_GNRLCTRL2, &gnrlctrl2))
setup_reg[SX9330_GNRLCTRL2_REG_IDX].val = gnrlctrl2;
/* phase 0 */
if (!sx9330_read_setupreg(node, SX9330_AFEPARAMSPH0, &afeparamsph0))
setup_reg[SX9330_AFEPARAMSPH0_REG_IDX].val = afeparamsph0;
if (!sx9330_read_setupreg(node, SX9330_AFEPHPH0, &afephph0))
setup_reg[SX9330_AFEPHPH0_REG_IDX].val = afephph0;
if (!sx9330_read_setupreg(node, SX9330_ADCFILTPH0, &adcfiltph0))
setup_reg[SX9330_ADCFILTPH0_REG_IDX].val = adcfiltph0;
/* phase 1 */
if (!sx9330_read_setupreg(node, SX9330_AFEPARAMSPH1, &afeparamsph1))
setup_reg[SX9330_AFEPARAMSPH0_REG_IDX + MAIN_SENSOR*2].val = afeparamsph1;
if (!sx9330_read_setupreg(node, SX9330_ADCFILTPH1, &adcfiltph1))
setup_reg[SX9330_ADCFILTPH0_REG_IDX + MAIN_SENSOR*8].val = adcfiltph1;
if (!sx9330_read_setupreg(node, SX9330_AVGBFILT, &avgbfilt))
setup_reg[SX9330_AVGBFILTPH0_REG_IDX + MAIN_SENSOR*8].val = avgbfilt;
if (!sx9330_read_setupreg(node, SX9330_AVGAFILT, &avgafilt))
setup_reg[SX9330_AVGAFILTPH0_REG_IDX + MAIN_SENSOR*8].val = avgafilt;
if (!sx9330_read_setupreg(node, SX9330_ADVDIG3, &advdig3))
setup_reg[SX9330_ADVDIG3PH0_REG_IDX + MAIN_SENSOR*8].val = advdig3;
if (!sx9330_read_setupreg(node, SX9330_ADVDIG4, &advdig4))
setup_reg[SX9330_ADVDIG4PH0_REG_IDX + MAIN_SENSOR*8].val = advdig4;
if (!sx9330_read_setupreg(node, SX9330_REFCORRA, &refcorra))
setup_reg[SX9330_REFCORRA_REG_IDX].val = refcorra;
ret = of_property_read_u32(node, "sx9330_wifi,hallic_detect", &data->hallic_detect);
if (ret < 0)
data->hallic_detect = 0;
return 0;
}
#if defined(CONFIG_CCIC_NOTIFIER) && defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER)
static int sx9330_ccic_handle_notification(struct notifier_block *nb,
unsigned long action, void *data)
{
CC_NOTI_ATTACH_TYPEDEF usb_typec_info =
*(CC_NOTI_ATTACH_TYPEDEF *)data;
struct sx9330_p *pdata =
container_of(nb, struct sx9330_p, cpuidle_ccic_nb);
static int pre_attach;
if (usb_typec_info.src != CCIC_NOTIFY_DEV_MUIC ||
usb_typec_info.dest != CCIC_NOTIFY_DEV_BATTERY)
return 0;
if (pre_attach == usb_typec_info.attach)
return 0;
if (pdata->init_done == ON) {
switch (usb_typec_info.cable_type) {
case ATTACHED_DEV_NONE_MUIC:
case ATTACHED_DEV_JIG_UART_OFF_MUIC:
case ATTACHED_DEV_JIG_UART_OFF_VB_MUIC: /* VBUS enabled */
case ATTACHED_DEV_JIG_UART_OFF_VB_OTG_MUIC: /* for otg test */
case ATTACHED_DEV_JIG_UART_OFF_VB_FG_MUIC: /* for fuelgauge test */
case ATTACHED_DEV_JIG_UART_ON_MUIC:
case ATTACHED_DEV_JIG_UART_ON_VB_MUIC: /* VBUS enabled */
case ATTACHED_DEV_JIG_USB_OFF_MUIC:
case ATTACHED_DEV_JIG_USB_ON_MUIC:
pr_info("[SX9330_WIFI]: %s skip cable = %d, attach = %d\n",
__func__, usb_typec_info.cable_type, usb_typec_info.attach);
break;
default:
pr_info("[SX9330_WIFI]: %s accept cable = %d, attach = %d\n",
__func__, usb_typec_info.cable_type, usb_typec_info.attach);
sx9330_set_offset_calibration(pdata);
break;
}
}
pre_attach = usb_typec_info.attach;
return 0;
}
#elif defined(CONFIG_MUIC_NOTIFIER)
static int sx9330_muic_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct sx9330_p *pdata = container_of(nb, struct sx9330_p, muic_nb);
muic_attached_dev_t attached_dev = *(muic_attached_dev_t *)data;
switch (attached_dev) {
case ATTACHED_DEV_OTG_MUIC:
case ATTACHED_DEV_USB_MUIC:
case ATTACHED_DEV_TA_MUIC:
case ATTACHED_DEV_AFC_CHARGER_PREPARE_MUIC:
case ATTACHED_DEV_AFC_CHARGER_9V_MUIC:
if (action == MUIC_NOTIFY_CMD_ATTACH) {
pr_info("[SX9330_WIFI]: %s TA/USB is inserted\n", __func__);
} else {
pr_info("[SX9330_WIFI]: %s TA/USB is removed\n", __func__);
}
if (pdata->init_done == ON)
sx9330_set_offset_calibration(pdata);
else
pr_info("[SX9330_WIFI]: %s not initialized\n", __func__);
break;
default:
break;
}
pr_info("[SX9330_WIFI]: %s dev=%d, action=%lu\n", __func__, attached_dev, action);
return NOTIFY_DONE;
}
#endif
static int sx9330_check_chip_id(struct sx9330_p *data)
{
int ret;
u32 value = 0;
ret = sx9330_i2c_read_16bit(data, SX9330_INFO_REG, &value);
if (ret < 0) {
pr_err("[SX9330_WIFI]: whoami[0x%x] read failed %d\n", value, ret);
return ret;
}
value &= 0xFF00;
value = value >> 8;
switch (value) {
case 0x30:
return 0;
case 0x34:
return 0;
default:
pr_err("[SX9330_WIFI]: invalid whoami(%x)\n", value);
return -1;
}
}
static int sx9330_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = -ENODEV;
struct sx9330_p *data = NULL;
pr_info("[SX9330_WIFI]: %s - Probe Start!\n", __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
pr_err("[SX9330_WIFI]: %s - i2c_check_functionality error\n",
__func__);
goto exit;
}
/* create memory for main struct */
data = kzalloc(sizeof(struct sx9330_p), GFP_KERNEL);
if (data == NULL) {
pr_err("[SX9330_WIFI]: %s - kzalloc error\n", __func__);
ret = -ENOMEM;
goto exit_kzalloc;
}
i2c_set_clientdata(client, data);
data->client = client;
data->factory_device = &client->dev;
ret = sx9330_input_init(data);
if (ret < 0)
goto exit_input_init;
wake_lock_init(&data->grip_wake_lock,
WAKE_LOCK_SUSPEND, "grip_wake_lock");
mutex_init(&data->read_mutex);
ret = sx9330_parse_dt(data, &client->dev);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - of_node error\n", __func__);
ret = -ENODEV;
goto exit_of_node;
}
ret = sx9330_setup_pin(data);
if (ret) {
pr_err("[SX9330_WIFI]: %s - could not setup pin\n", __func__);
goto exit_setup_pin;
}
/* read chip id */
ret = sx9330_check_chip_id(data);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - chip id check failed %d\n", __func__, ret);
goto exit_chip_reset;
}
ret = sx9330_i2c_write_16bit(data, SX9330_RESET_REG, I2C_SOFTRESET_VALUE);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - chip reset failed %d\n", __func__, ret);
goto exit_chip_reset;
}
sx9330_initialize_variable(data);
INIT_DELAYED_WORK(&data->init_work, sx9330_init_work_func);
INIT_DELAYED_WORK(&data->irq_work, sx9330_irq_work_func);
INIT_DELAYED_WORK(&data->debug_work, sx9330_debug_work_func);
data->irq = gpio_to_irq(data->gpio_nirq);
/* initailize interrupt reporting */
ret = request_threaded_irq(data->irq, NULL, sx9330_interrupt_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"sx9330_wifi_irq", data);
if (ret < 0) {
pr_err("[SX9330_WIFI]: %s - failed to set request_threaded_irq %d"
" as returning (%d)\n", __func__, data->irq, ret);
goto exit_request_threaded_irq;
}
disable_irq(data->irq);
ret = sensors_register(&data->factory_device,
data, sensor_attrs, MODULE_NAME);
if (ret) {
pr_err("[SX9330_WIFI] %s - cound not register sensor(%d).\n",
__func__, ret);
goto exit_register_failed;
}
schedule_delayed_work(&data->init_work, msecs_to_jiffies(800));
sx9330_set_debug_work(data, ON, 20000);
#if defined(CONFIG_CCIC_NOTIFIER) && defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER)
manager_notifier_register(&data->cpuidle_ccic_nb,
sx9330_ccic_handle_notification,
MANAGER_NOTIFY_CCIC_USB);
#elif defined(CONFIG_MUIC_NOTIFIER)
muic_notifier_register(&data->muic_nb, sx9330_muic_notifier,
MUIC_NOTIFY_DEV_CPUIDLE);
#endif
pr_info("[SX9330_WIFI]: %s - Probe done!\n", __func__);
return 0;
exit_register_failed:
free_irq(data->irq, data);
exit_request_threaded_irq:
exit_chip_reset:
gpio_free(data->gpio_nirq);
exit_setup_pin:
exit_of_node:
mutex_destroy(&data->read_mutex);
wake_lock_destroy(&data->grip_wake_lock);
sysfs_remove_group(&data->input->dev.kobj, &sx9330_attribute_group);
sensors_remove_symlink(&data->input->dev.kobj, data->input->name);
input_unregister_device(data->input);
exit_input_init:
kfree(data);
exit_kzalloc:
exit:
pr_err("[SX9330_WIFI]: %s - Probe fail!\n", __func__);
return ret;
}
static int sx9330_remove(struct i2c_client *client)
{
struct sx9330_p *data = (struct sx9330_p *)i2c_get_clientdata(client);
if (atomic_read(&data->enable) == ON)
sx9330_set_enable(data, OFF);
sx9330_set_mode(data, SX9330_MODE_SLEEP);
cancel_delayed_work_sync(&data->init_work);
cancel_delayed_work_sync(&data->irq_work);
cancel_delayed_work_sync(&data->debug_work);
free_irq(data->irq, data);
gpio_free(data->gpio_nirq);
wake_lock_destroy(&data->grip_wake_lock);
sensors_unregister(data->factory_device, sensor_attrs);
sensors_remove_symlink(&data->input->dev.kobj, data->input->name);
sysfs_remove_group(&data->input->dev.kobj, &sx9330_attribute_group);
input_unregister_device(data->input);
mutex_destroy(&data->read_mutex);
kfree(data);
return 0;
}
static int sx9330_suspend(struct device *dev)
{
struct sx9330_p *data = dev_get_drvdata(dev);
int cnt = 0;
pr_info("[SX9330_WIFI]: %s\n", __func__);
/* before go to sleep, make the interrupt pin as high*/
while ((sx9330_get_nirq_state(data) == 0) && (cnt++ < 3)) {
sx9330_read_irqstate(data);
msleep(20);
}
if (cnt >= 3)
pr_err("[SX9330_WIFI]: %s - s/w reset fail(%d)\n", __func__, cnt);
sx9330_set_debug_work(data, OFF, 1000);
return 0;
}
static int sx9330_resume(struct device *dev)
{
struct sx9330_p *data = dev_get_drvdata(dev);
pr_info("[SX9330_WIFI]: %s\n", __func__);
sx9330_set_debug_work(data, ON, 1000);
return 0;
}
static void sx9330_shutdown(struct i2c_client *client)
{
struct sx9330_p *data = i2c_get_clientdata(client);
pr_info("[SX9330_WIFI]: %s\n", __func__);
sx9330_set_debug_work(data, OFF, 1000);
if (atomic_read(&data->enable) == ON)
sx9330_set_enable(data, OFF);
sx9330_set_mode(data, SX9330_MODE_SLEEP);
}
static struct of_device_id sx9330_match_table[] = {
{ .compatible = "sx9330_wifi",},
{},
};
static const struct i2c_device_id sx9330_id[] = {
{ "sx9330_match_table", 0 },
{ }
};
static const struct dev_pm_ops sx9330_pm_ops = {
.suspend = sx9330_suspend,
.resume = sx9330_resume,
};
static struct i2c_driver sx9330_driver = {
.driver = {
.name = MODEL_NAME,
.owner = THIS_MODULE,
.of_match_table = sx9330_match_table,
.pm = &sx9330_pm_ops
},
.probe = sx9330_probe,
.remove = sx9330_remove,
.shutdown = sx9330_shutdown,
.id_table = sx9330_id,
};
static int __init sx9330_init(void)
{
return i2c_add_driver(&sx9330_driver);
}
static void __exit sx9330_exit(void)
{
i2c_del_driver(&sx9330_driver);
}
module_init(sx9330_init);
module_exit(sx9330_exit);
MODULE_DESCRIPTION("Semtech Corp. SX9330 Capacitive Touch Controller Driver");
MODULE_AUTHOR("Samsung Electronics");
MODULE_LICENSE("GPL");