| /* |
| * Copyright (C) 2010,Imagis Technology Co. Ltd. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| |
| #include <asm/unaligned.h> |
| #include <linux/uaccess.h> |
| #include <linux/fcntl.h> |
| #include <linux/file.h> |
| #include <linux/fs.h> |
| #include <linux/err.h> |
| |
| #include <linux/platform_device.h> |
| #include <linux/device.h> |
| #include <linux/mutex.h> |
| #include <linux/input/mt.h> |
| |
| #ifdef CONFIG_OF |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_device.h> |
| #endif |
| |
| #include "ist40xx.h" |
| #include "ist40xx_misc.h" |
| #include "ist40xx_update.h" |
| #ifdef IST40XX_USE_CMCS |
| #include "ist40xx_cmcs.h" |
| #endif |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| #include <linux/t-base-tui.h> |
| #endif |
| |
| #ifdef IST40XX_USE_KEY |
| int ist40xx_key_code[] = IST40XX_KEY_CODES; |
| #endif |
| |
| struct ist40xx_data *ts_data; |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| struct ist40xx_data *tui_tsp_info; |
| extern int tui_force_close(uint32_t arg); |
| #endif |
| |
| int ist40xx_log_level = DEV_NOTI; |
| void tsp_printk(int level, const char *fmt, ...) |
| { |
| struct va_format vaf; |
| va_list args; |
| |
| if (ist40xx_log_level < level) |
| return; |
| |
| va_start(args, fmt); |
| |
| vaf.fmt = fmt; |
| vaf.va = &args; |
| |
| printk("%s %pV", IST40XX_LOG_TAG, &vaf); |
| |
| va_end(args); |
| } |
| |
| long get_milli_second(struct ist40xx_data *data) |
| { |
| ktime_get_ts(&data->t_current); |
| |
| return data->t_current.tv_sec * 1000 + |
| data->t_current.tv_nsec / 1000000; |
| } |
| |
| void ist40xx_delay(unsigned int ms) |
| { |
| if (ms < 20) |
| usleep_range(ms * 1000, ms * 1000); |
| else |
| msleep(ms); |
| } |
| |
| int ist40xx_intr_wait(struct ist40xx_data *data, long ms) |
| { |
| long start_ms = get_milli_second(data); |
| long curr_ms = 0; |
| |
| while (1) { |
| if (!data->irq_working) |
| break; |
| |
| curr_ms = get_milli_second(data); |
| if ((curr_ms < 0) || (start_ms < 0) |
| || (curr_ms - start_ms > ms)) { |
| input_info(true, &data->client->dev, |
| "%s() timeout(%dms)\n", __func__, ms); |
| return -EPERM; |
| } |
| |
| ist40xx_delay(2); |
| } |
| return 0; |
| } |
| |
| void ist40xx_disable_irq(struct ist40xx_data *data) |
| { |
| if (likely(data->irq_enabled)) { |
| disable_irq(data->client->irq); |
| data->irq_enabled = false; |
| data->status.event_mode = false; |
| } |
| } |
| |
| void ist40xx_enable_irq(struct ist40xx_data *data) |
| { |
| if (likely(!data->irq_enabled)) { |
| enable_irq(data->client->irq); |
| ist40xx_delay(10); |
| data->irq_enabled = true; |
| data->status.event_mode = true; |
| } |
| } |
| |
| void ist40xx_scheduled_reset(struct ist40xx_data *data) |
| { |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if (TRUSTEDUI_MODE_INPUT_SECURED & trustedui_get_current_mode()) { |
| tsp_err("%s return, TUI is enabled!\n", __func__); |
| return; |
| } |
| #endif |
| if (likely(data->initialized)) |
| schedule_delayed_work(&data->work_reset_check, 0); |
| } |
| |
| static void ist40xx_request_reset(struct ist40xx_data *data) |
| { |
| data->irq_err_cnt++; |
| if (unlikely(data->irq_err_cnt >= data->max_irq_err_cnt)) { |
| input_info(true, &data->client->dev, "%s()\n", __func__); |
| ist40xx_scheduled_reset(data); |
| data->irq_err_cnt = 0; |
| } |
| } |
| |
| void ist40xx_start(struct ist40xx_data *data) |
| { |
| if (data->initialized) { |
| data->scan_count = 0; |
| data->scan_retry = 0; |
| mod_timer(&data->event_timer, |
| get_jiffies_64() + EVENT_TIMER_INTERVAL * 2); |
| } |
| |
| data->ignore_delay = true; |
| |
| /* TA mode */ |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| |
| if (data->report_rate >= 0) { |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_TIME_ACTIVE << 16) | |
| (data->report_rate & 0xFFFF))); |
| input_info(true, &data->client->dev, "%s: active rate : %dus\n", |
| __func__, data->report_rate); |
| } |
| |
| if (data->idle_rate >= 0) { |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_TIME_IDLE << 16) | |
| (data->idle_rate & 0xFFFF))); |
| input_info(true, &data->client->dev, "%s: idle rate : %dus\n", |
| __func__, data->idle_rate); |
| } |
| |
| if (data->jig_mode) { |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SET_JIG_MODE << 16) | |
| (IST40XX_JIG_TOUCH & 0xFFFF)); |
| input_info(true, &data->client->dev, "%s: jig mode start\n", |
| __func__); |
| } |
| |
| if (data->rec_mode) { |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SET_REC_MODE << 16) | (IST40XX_ENABLE & |
| 0xFFFF)); |
| input_info(true, &data->client->dev, "%s: rec mode start\n", |
| __func__); |
| } |
| |
| if (data->debugging_mode) { |
| data->debugging_scancnt = 0; |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SET_DBG_MODE << 16) | (IST40XX_ENABLE & |
| 0xFFFF)); |
| input_info(true, &data->client->dev, |
| "%s: debugging mode start\n", __func__); |
| } |
| |
| if (data->debug_mode || data->jig_mode || data->rec_mode || |
| data->debugging_mode) { |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SLEEP_MODE_EN << 16) | (IST40XX_DISABLE |
| & 0xFFFF)); |
| input_info(true, &data->client->dev, "%s: nosleep mode start\n", |
| __func__); |
| } |
| |
| ist40xx_cmd_start_scan(data); |
| |
| data->ignore_delay = false; |
| |
| if (data->rec_mode) { |
| ist40xx_delay(100); |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SET_REC_MODE << 16) | |
| (IST40XX_START_SCAN & 0xFFFF)); |
| } |
| |
| input_info(true, &data->client->dev, "%s, mode : 0x%x\n", __func__, |
| data->noise_mode & 0xFFFF); |
| } |
| |
| int ist40xx_set_input_device(struct ist40xx_data *data) |
| { |
| int ret; |
| |
| data->input_dev->name = "sec_touchscreen"; |
| data->input_dev->id.bustype = BUS_I2C; |
| data->input_dev->dev.parent = &data->client->dev; |
| |
| input_mt_init_slots(data->input_dev, IST40XX_MAX_FINGERS, 0); |
| |
| set_bit(EV_SYN, data->input_dev->evbit); |
| set_bit(EV_ABS, data->input_dev->evbit); |
| set_bit(EV_KEY, data->input_dev->evbit); |
| set_bit(INPUT_PROP_DIRECT, data->input_dev->propbit); |
| |
| input_set_abs_params(data->input_dev, ABS_MT_PALM, 0, 1, 0, 0); |
| input_set_abs_params(data->input_dev, ABS_MT_POSITION_X, 0, |
| data->tsp_info.width - 1, 0, 0); |
| input_set_abs_params(data->input_dev, ABS_MT_POSITION_Y, 0, |
| data->tsp_info.height - 1, 0, 0); |
| input_set_abs_params(data->input_dev, ABS_MT_TOUCH_MAJOR, 0, |
| IST40XX_MAX_MAJOR, 0, 0); |
| input_set_abs_params(data->input_dev, ABS_MT_TOUCH_MINOR, 0, |
| IST40XX_MAX_MINOR, 0, 0); |
| #ifdef CONFIG_SEC_FACTORY |
| input_set_abs_params(data->input_dev, ABS_MT_PRESSURE, 0, IST40XX_MAX_Z, |
| 0, 0); |
| #endif |
| |
| #ifdef IST40XX_USE_KEY |
| { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(ist40xx_key_code); i++) |
| set_bit(ist40xx_key_code[i], data->input_dev->keybit); |
| } |
| #endif |
| input_set_capability(data->input_dev, EV_KEY, KEY_BLACK_UI_GESTURE); |
| |
| input_set_drvdata(data->input_dev, data); |
| ret = input_register_device(data->input_dev); |
| |
| input_info(true, &data->client->dev, "%s: input register device:%d\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| int ist40xx_get_info(struct ist40xx_data *data) |
| { |
| int ret; |
| u32 calib_msg; |
| |
| ist40xx_disable_irq(data); |
| |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_FW_HOLD << 16) | (IST40XX_ENABLE & 0xFFFF)); |
| ist40xx_delay(20); |
| |
| mutex_lock(&data->lock); |
| ret = ist40xx_get_tsp_info(data); |
| if (unlikely(ret)) { |
| mutex_unlock(&data->lock); |
| goto err_get_info; |
| } |
| mutex_unlock(&data->lock); |
| |
| ist40xx_print_info(data); |
| |
| ret = ist40xx_set_input_device(data); |
| if (unlikely(ret)) |
| goto err_get_info; |
| |
| ist40xx_read_cmd(data, eHCOM_GET_SLF_CAL_RESULT, &calib_msg); |
| input_info(true, &data->client->dev, "SLF calib result: 0x%08X\n", |
| calib_msg); |
| ist40xx_read_cmd(data, eHCOM_GET_CAL_RESULT, &calib_msg); |
| input_info(true, &data->client->dev, "MTL calib result: 0x%08X\n", |
| calib_msg); |
| |
| ret = ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_FW_HOLD << 16) | (IST40XX_DISABLE & |
| 0xFFFF)); |
| if (ret) { |
| tsp_warn("%s fail to disable hold\n", __func__); |
| mutex_lock(&data->lock); |
| ist40xx_reset(data, false); |
| mutex_unlock(&data->lock); |
| } |
| |
| ist40xx_enable_irq(data); |
| |
| return 0; |
| |
| err_get_info: |
| |
| return ret; |
| } |
| |
| #define SPECIAL_MAGIC_STRING (0x4170CF00) |
| #define SPECIAL_MAGIC_MASK (0xFFFFFF00) |
| #define SPECIAL_MESSAGE_MASK (~SPECIAL_MAGIC_MASK) |
| #define PARSE_SPECIAL_MESSAGE(n) \ |
| ((n & SPECIAL_MAGIC_MASK) == SPECIAL_MAGIC_STRING ? \ |
| (n & SPECIAL_MESSAGE_MASK) : -EINVAL) |
| #define SPECIAL_START_MASK (0x80) |
| #define SPECIAL_SUCCESS_MASK (0x0F) |
| void ist40xx_special_cmd(struct ist40xx_data *data, int cmd) |
| { |
| #ifdef USE_SPONGE_LIB |
| gesture_msg g_msg; |
| #endif |
| if (cmd == 0) { |
| #ifdef USE_SPONGE_LIB |
| ist40xx_burst_read(data->client, IST40XX_HIB_GESTURE_MSG, g_msg.full, |
| sizeof(g_msg.full) / IST40XX_DATA_LEN, true); |
| |
| if (g_msg.b.eid == EID_GESTURE) { |
| switch (g_msg.b.gtype) { |
| case GESTURE_SWIPE: |
| if (g_msg.b.gid == GESTURE_SWIPE_UP) { |
| data->scrub_id = SPONGE_EVENT_TYPE_SPAY; |
| data->scrub_x = 0; |
| data->scrub_y = 0; |
| data->all_spay_count++; |
| |
| input_info(true, &data->client->dev, "Swipe Up Trigger~\n"); |
| |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, true); |
| input_sync(data->input_dev); |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, false); |
| input_sync(data->input_dev); |
| } |
| break; |
| case GESTURE_TAP: |
| if (g_msg.b.gid == GESTURE_TAP_DOUBLE) { |
| data->scrub_id = SPONGE_EVENT_TYPE_AOD_DOUBLETAB; |
| data->scrub_x = (g_msg.b.gdata[0] << 4) | |
| (g_msg.b.gdata[2] & 0xF); |
| data->scrub_y = (g_msg.b.gdata[1] << 4) | |
| (g_msg.b.gdata[2] & 0xF); |
| data->all_aod_tsp_count++; |
| #ifdef CONFIG_SAMSUNG_PRODUCT_SHIP |
| input_info(true, &data->client->dev, "Double Tap Trigger~\n"); |
| #else |
| input_info(true, &data->client->dev, "Double Tap Trigger~ (%d, %d)\n", |
| data->scrub_x, data->scrub_y); |
| #endif |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, true); |
| input_sync(data->input_dev); |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, false); |
| input_sync(data->input_dev); |
| } |
| break; |
| case GESTURE_PRESSURE: |
| case GESTURE_PRESS: |
| break; |
| case GESTURE_SINGLETAB: |
| if (g_msg.b.gid == GESTURE_TAP_SINGLE) { |
| data->scrub_id = SPONGE_EVENT_TYPE_SINGLE_TAP; |
| data->scrub_x = (g_msg.b.gdata[0] << 4) | |
| (g_msg.b.gdata[2] & 0xF); |
| data->scrub_y = (g_msg.b.gdata[1] << 4) | |
| (g_msg.b.gdata[2] & 0xF); |
| #ifdef CONFIG_SAMSUNG_PRODUCT_SHIP |
| input_info(true, &data->client->dev, "Single Tap Trigger~\n"); |
| #else |
| input_info(true, &data->client->dev, "Single Tap Trigger~ (%d, %d)\n", |
| data->scrub_x, data->scrub_y); |
| #endif |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, true); |
| input_sync(data->input_dev); |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, false); |
| input_sync(data->input_dev); |
| } |
| break; |
| default: |
| input_err(true, &data->client->dev, "Not support gesture type\n"); |
| break; |
| } |
| } else { |
| input_err(true, &data->client->dev, "Not Gesture Msg\n"); |
| } |
| #else |
| ist40xx_burst_read(data->client, IST40XX_HIB_GESTURE_REG, |
| data->g_reg.full, |
| sizeof(data->g_reg.full) / IST40XX_DATA_LEN, |
| true); |
| |
| tsp_debug( |
| "0x%02X, 0x%02X, %d, %d, %d, %d, %d, %d, 0x%02X\n", |
| data->g_reg.b.ctrl, data->g_reg.b.evt, |
| data->g_reg.b.w, data->g_reg.b.h, data->g_reg.b.x, |
| data->g_reg.b.y, data->g_reg.b.evt_x, |
| data->g_reg.b.evt_y, data->g_reg.b.setting); |
| |
| if (data->g_reg.b.evt & IST40XX_GETURE_EVT_SPAY) { |
| input_info(true, &data->client->dev, "SPAY Trigger~\n"); |
| |
| data->scrub_id = SPONGE_EVENT_TYPE_SPAY; |
| data->scrub_x = 0; |
| data->scrub_y = 0; |
| data->all_spay_count++; |
| |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, |
| 1); |
| input_sync(data->input_dev); |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, |
| 0); |
| input_sync(data->input_dev); |
| } else if (data->g_reg.b.evt & IST40XX_GETURE_EVT_AOD) { |
| input_info(true, &data->client->dev, "AOD Trigger~ (%d, %d)\n", |
| data->g_reg.b.evt_x, data->g_reg.b.evt_y); |
| data->g_reg.b.evt = 0; |
| ist40xx_burst_write(data->client, |
| IST40XX_HIB_GESTURE_REG, |
| data->g_reg.full, 1); |
| |
| data->scrub_id = SPONGE_EVENT_TYPE_AOD_DOUBLETAB; |
| data->scrub_x = data->g_reg.b.evt_x; |
| data->scrub_y = data->g_reg.b.evt_y; |
| data->all_aod_tsp_count++; |
| |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, |
| 1); |
| input_sync(data->input_dev); |
| input_report_key(data->input_dev, KEY_BLACK_UI_GESTURE, |
| 0); |
| input_sync(data->input_dev); |
| } |
| #endif |
| return; |
| } |
| |
| input_err(true, &data->client->dev, "Not support gesture cmd: 0x%02X\n", cmd); |
| } |
| |
| void location_detect (struct ist40xx_data *data, char *loc, int x, int y) |
| { |
| if (x < data->dt_data->area_edge) |
| strncat(loc, "E.", 2); |
| else if (x < (data->tsp_info.width - data->dt_data->area_edge)) |
| strncat(loc, "C.", 2); |
| else |
| strncat(loc, "e.", 2); |
| |
| if (y < data->dt_data->area_indicator) |
| strncat(loc, "S", 1); |
| else if (y < (data->tsp_info.height - data->dt_data->area_navigation)) |
| strncat(loc, "C", 1); |
| else |
| strncat(loc, "N", 1); |
| } |
| |
| #define PRESS_MSG_MASK (0x01) |
| #define MULTI_MSG_MASK (0x02) |
| #define TOUCH_DOWN_MESSAGE ("p") |
| #define TOUCH_UP_MESSAGE ("r") |
| #define TOUCH_MOVE_MESSAGE (" ") |
| void print_tsp_event(struct ist40xx_data *data, int id, finger_info *finger) |
| { |
| bool press; |
| int ret = 0; |
| u32 status = 0; |
| u8 mode = TOUCH_STATUS_NORMAL_MODE; |
| char location[4] = { 0 }; |
| |
| press = PRESSED_FINGER(data->t_status, id); |
| |
| if (press) { |
| data->move_count[id]++; |
| if (data->tsp_touched[id] == false) { |
| /* touch down */ |
| ret = |
| ist40xx_read_reg(data->client, |
| IST40XX_HIB_TOUCH_STATUS, &status); |
| if (ret == 0) { |
| if ((status & TOUCH_STATUS_MASK) == |
| TOUCH_STATUS_MAGIC) { |
| if (GET_NOISE_MODE(status)) |
| mode |= TOUCH_STATUS_NOISE_MODE; |
| if (GET_WET_MODE(status)) |
| mode |= TOUCH_STATUS_WET_MODE; |
| } |
| } |
| data->touch_pressed_num++; |
| /*for getting coordinate of pressed point*/ |
| data->p_x[id] = data->r_x[id] = finger->bit_field.x; |
| data->p_y[id] = data->r_y[id] = finger->bit_field.y; |
| location_detect(data, location, data->p_x[id], data->p_y[id]); |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| input_info(true, &data->client->dev, "%s%d.%d (%d, %d) loc:%s (p:%d, ma:%d, mi:%d) (%d)\n", |
| TOUCH_DOWN_MESSAGE, id, (data->input_dev->mt->trkid - 1) & TRKID_MAX, |
| finger->bit_field.x, finger->bit_field.y, |
| location, PARSE_PALM_STATUS(data->t_status), |
| finger->bit_field.ma, finger->bit_field.mi, mode); |
| #else |
| input_info(true, &data->client->dev, "%s%d.%d loc:%s (p:%d, ma:%d, mi:%d) (%d)\n", |
| TOUCH_DOWN_MESSAGE, id, (data->input_dev->mt->trkid - 1) & TRKID_MAX, |
| location, PARSE_PALM_STATUS(data->t_status), |
| finger->bit_field.ma, finger->bit_field.mi, mode); |
| #endif |
| data->tsp_touched[id] = true; |
| do_gettimeofday(&data->time_pressed[id]); |
| data->all_finger_count++; |
| } else { |
| /* touch move */ |
| /*for getting coordinate of the last point of move event*/ |
| data->r_x[id] = finger->bit_field.x; |
| data->r_y[id] = finger->bit_field.y; |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| tsp_debug( |
| "%s%d (%d, %d) (p:%d, ma:%d, mi:%d)\n", |
| TOUCH_MOVE_MESSAGE, id, |
| finger->bit_field.x, finger->bit_field.y, |
| PARSE_PALM_STATUS(data->t_status), |
| finger->bit_field.ma, finger->bit_field.mi); |
| #else |
| tsp_debug( |
| "%s%d (p:%d, ma:%d, mi:%d)\n", |
| TOUCH_MOVE_MESSAGE, id, |
| PARSE_PALM_STATUS(data->t_status), |
| finger->bit_field.ma, finger->bit_field.mi); |
| #endif |
| } |
| } else { |
| if (data->tsp_touched[id] == true) { |
| /* touch up */ |
| data->touch_pressed_num--; |
| location_detect(data, location, data->r_x[id], data->r_y[id]); |
| #ifdef TCLM_CONCEPT |
| input_info(true, &data->client->dev, "%s%d loc:%s dX,dY:%d,%d mc:%d (0x%02x) " |
| "(test_result data :%x) (C%02XT%04X.%4s%s)\n", |
| TOUCH_UP_MESSAGE, id, location, |
| (data->r_x[id] - data->p_x[id]), (data->r_y[id] - data->p_y[id]), |
| data->move_count[id], data->fw.cur.fw_ver, data->test_result.data[0], |
| data->tdata->nvdata.cal_count, data->tdata->nvdata.tune_fix_ver, |
| data->tdata->tclm_string[data->tdata->nvdata.cal_position].f_name, |
| (data->tdata->tclm_level == TCLM_LEVEL_LOCKDOWN) ? ".L" : " "); |
| #else |
| input_info(true, &data->client->dev, "%s%d loc:%s dX,dY:%d,%d mc:%d (0x%02x)\n", |
| TOUCH_UP_MESSAGE, id, location, |
| (data->r_x[id] - data->p_x[id]), (data->r_y[id] - data->p_y[id]), |
| data->move_count[id], data->fw.cur.fw_ver); |
| #endif |
| data->tsp_touched[id] = false; |
| do_gettimeofday(&data->time_released[id]); |
| if (data->time_longest < |
| (data->time_released[id].tv_sec - |
| data->time_pressed[id].tv_sec)) |
| data->time_longest = |
| (data->time_released[id].tv_sec - |
| data->time_pressed[id].tv_sec); |
| } |
| data->move_count[id] = 0; |
| } |
| |
| if ((data->touch_pressed_num > 2) && (data->check_multi == 0)) { |
| data->check_multi = 1; |
| data->multi_count++; |
| } |
| |
| if (data->touch_pressed_num == 0) |
| data->check_multi = 0; |
| } |
| |
| #ifdef IST40XX_USE_KEY |
| #define PRESS_MSG_KEY (0x06) |
| void print_tkey_event(struct ist40xx_data *data, int id) |
| { |
| bool press = PRESSED_KEY(data->t_status, id); |
| |
| if (press) { |
| if (data->tkey_pressed[id] == false) { |
| /* tkey down */ |
| input_info(true, &data->client->dev, "k %s%d\n", TOUCH_DOWN_MESSAGE, id); |
| data->tkey_pressed[id] = true; |
| } |
| } else { |
| if (data->tkey_pressed[id] == true) { |
| /* tkey up */ |
| input_info(true, &data->client->dev, "k %s%d\n", TOUCH_UP_MESSAGE, id); |
| data->tkey_pressed[id] = false; |
| } |
| } |
| } |
| #endif |
| static void release_finger(struct ist40xx_data *data, int id) |
| { |
| input_mt_slot(data->input_dev, id); |
| input_mt_report_slot_state(data->input_dev, MT_TOOL_FINGER, false); |
| |
| input_sync(data->input_dev); |
| |
| input_info(true, &data->client->dev, "forced touch release: %d\n", |
| id); |
| |
| data->tsp_touched[id] = false; |
| if (data->debugging_mode && (id < 2)) |
| data->t_frame[id] = 0; |
| |
| do_gettimeofday(&data->time_released[id]); |
| if (data->time_longest < (data->time_released[id].tv_sec - |
| data->time_pressed[id].tv_sec)) |
| data->time_longest = (data->time_released[id].tv_sec - |
| data->time_pressed[id].tv_sec); |
| |
| data->touch_pressed_num = 0; |
| data->check_multi = 0; |
| } |
| |
| #ifdef IST40XX_USE_KEY |
| static void release_key(struct ist40xx_data *data, int id) |
| { |
| input_report_key(data->input_dev, ist40xx_key_code[id], false); |
| |
| input_info(true, &data->client->dev, "forced key release: %d\n", |
| id); |
| |
| data->tkey_pressed[id] = false; |
| |
| input_sync(data->input_dev); |
| } |
| #endif |
| static void clear_input_data(struct ist40xx_data *data) |
| { |
| int id = 0; |
| u32 status; |
| |
| status = PARSE_FINGER_STATUS(data->t_status); |
| while (status) { |
| if (status & 1) |
| release_finger(data, id); |
| status >>= 1; |
| id++; |
| } |
| #ifdef IST40XX_USE_KEY |
| id = 0; |
| status = PARSE_KEY_STATUS(data->t_status); |
| while (status) { |
| if (status & 1) |
| release_key(data, id); |
| status >>= 1; |
| id++; |
| } |
| #endif |
| |
| data->t_status = 0; |
| } |
| |
| static int check_valid_coord(u32 * msg, int cnt) |
| { |
| u8 *buf = (u8 *) msg; |
| u8 chksum1 = msg[0] >> 24; |
| u8 chksum2 = 0; |
| u32 tmp = msg[0]; |
| |
| msg[0] &= 0x00FFFFFF; |
| |
| cnt *= IST40XX_DATA_LEN; |
| |
| while (cnt--) |
| chksum2 += *buf++; |
| |
| msg[0] = tmp; |
| |
| if (chksum1 != chksum2) { |
| tsp_err("intr chksum: %02x, %02x\n", chksum1, chksum2); |
| return -EPERM; |
| } |
| |
| return 0; |
| } |
| |
| static void report_input_data(struct ist40xx_data *data, int finger_counts, |
| int key_counts) |
| { |
| int id; |
| bool press = false; |
| finger_info *fingers = (finger_info *) data->fingers; |
| u32 *z_values = (u32 *) data->z_values; |
| int idx = 0; |
| u32 status; |
| |
| memset(data->t_frame, 0, sizeof(data->t_frame)); |
| |
| status = PARSE_FINGER_STATUS(data->t_status); |
| for (id = 0; id < IST40XX_MAX_FINGERS; id++) { |
| press = (status & (1 << id)) ? true : false; |
| |
| input_mt_slot(data->input_dev, id); |
| if (press == false) { |
| if (data->jig_mode) |
| input_report_abs(data->input_dev, |
| ABS_MT_PRESSURE, 0); |
| } |
| input_mt_report_slot_state(data->input_dev, MT_TOOL_FINGER, |
| press); |
| |
| print_tsp_event(data, id, &fingers[idx]); |
| |
| if (press == false) |
| continue; |
| |
| if (data->debugging_mode && (id < 2)) |
| data->t_frame[id] = fingers[idx].full_field; |
| |
| input_report_abs(data->input_dev, ABS_MT_PALM, |
| PARSE_PALM_STATUS(data->t_status)); |
| input_report_abs(data->input_dev, ABS_MT_POSITION_X, |
| fingers[idx].bit_field.x); |
| input_report_abs(data->input_dev, ABS_MT_POSITION_Y, |
| fingers[idx].bit_field.y); |
| input_report_abs(data->input_dev, ABS_MT_TOUCH_MAJOR, |
| fingers[idx].bit_field.ma); |
| input_report_abs(data->input_dev, ABS_MT_TOUCH_MINOR, |
| fingers[idx].bit_field.mi); |
| if (data->jig_mode) { |
| if (z_values[idx] < 1) |
| z_values[idx] = 1; |
| input_report_abs(data->input_dev, ABS_MT_PRESSURE, |
| z_values[idx]); |
| } |
| idx++; |
| } |
| |
| #ifdef IST40XX_USE_KEY |
| status = PARSE_KEY_STATUS(data->t_status); |
| for (id = 0; id < ARRAY_SIZE(ist40xx_key_code); id++) { |
| press = (status & (1 << id)) ? true : false; |
| input_report_key(data->input_dev, ist40xx_key_code[id], press); |
| print_tkey_event(data, id); |
| } |
| #endif |
| |
| data->irq_err_cnt = 0; |
| data->scan_retry = 0; |
| |
| input_sync(data->input_dev); |
| } |
| |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| void recording_data(struct ist40xx_data *data, bool idle) |
| { |
| int ret; |
| u32 scancnt = 0; |
| u32 addr = 0; |
| u32 *buf32; |
| TSP_INFO *tsp = &data->tsp_info; |
| |
| if (idle && (data->rec_mode > 1)) |
| goto state_idle; |
| |
| ist40xx_delay(data->rec_delay); |
| |
| ret = ist40xx_read_reg(data->client, IST40XX_HIB_TOUCH_STATUS, |
| &scancnt); |
| if (ret) { |
| input_err(true, &data->client->dev, |
| "%s failed to read scancnt\n", __func__); |
| goto state_idle; |
| } |
| |
| if (data->recording_scancnt == scancnt) { |
| tsp_warn("%s same recording scancnt\n", __func__); |
| goto state_idle; |
| } |
| |
| data->recording_scancnt = scancnt; |
| |
| buf32 = kzalloc(data->rec_size + |
| (tsp->node.self_len + tsp->node.len) * sizeof(u32), |
| GFP_KERNEL); |
| if (unlikely(!buf32)) { |
| input_err(true, &data->client->dev, "%s failed to allocate\n", |
| __func__); |
| goto state_idle; |
| } |
| |
| if (data->rec_size > 0) { |
| addr = IST40XX_DA_ADDR(data->rec_addr); |
| ret = ist40xx_burst_read(data->client, addr, buf32, |
| data->rec_size / IST40XX_DATA_LEN, |
| true); |
| if (ret) |
| goto err_rec_fail; |
| } |
| |
| addr = IST40XX_DA_ADDR(data->self_cdc_addr); |
| ret = ist40xx_burst_read(data->client, addr, |
| buf32 + (data->rec_size / IST40XX_DATA_LEN), |
| tsp->node.self_len, true); |
| if (ret) |
| goto err_rec_fail; |
| |
| addr = IST40XX_DA_ADDR(data->cdc_addr); |
| ret = ist40xx_burst_read(data->client, addr, |
| buf32 + (data->rec_size / IST40XX_DATA_LEN) + |
| tsp->node.self_len, tsp->node.len, true); |
| if (ret) |
| goto err_rec_fail; |
| |
| ist40xx_recording_put_frame(data, buf32, |
| (data->rec_size / IST40XX_DATA_LEN) + |
| tsp->node.self_len + tsp->node.len); |
| |
| err_rec_fail: |
| kfree(buf32); |
| |
| state_idle: |
| data->ignore_delay = true; |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| (eHCOM_SET_REC_MODE << 16) | (IST40XX_START_SCAN & |
| 0xFFFF)); |
| data->ignore_delay = false; |
| } |
| #endif |
| |
| /* |
| * CMD : CMD_GET_COORD |
| * |
| * 1st [31:24] [23:21] [20:16] [15:12] [11] [10] [9:0] |
| * Checksum KeyCnt KeyStatus FingerCnt Rsvd. Palm FingerStatus |
| * 2nd [31:28] [27:24] [23:12] [11:0] |
| * Major Minor X Y |
| */ |
| static irqreturn_t ist40xx_irq_thread(int irq, void *ptr) |
| { |
| int i, ret = 0; |
| int key_cnt, finger_cnt, read_cnt; |
| struct ist40xx_data *data = (struct ist40xx_data *)ptr; |
| int offset = 1; |
| u32 t_status; |
| u32 msg[IST40XX_MAX_FINGERS * 2 + offset]; |
| u32 *buf32; |
| u32 ms; |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| u32 debugBuf32[IST40XX_MAX_DEBUGINFO / IST40XX_DATA_LEN]; |
| u32 touch[2]; |
| #endif |
| bool idle = false; |
| |
| data->irq_working = true; |
| memset(msg, 0, sizeof(msg)); |
| |
| if (unlikely(!data->irq_enabled)) |
| goto irq_ignore; |
| |
| if (data->status.sys_mode == STATE_LPM) |
| pm_wakeup_event(data->input_dev->dev.parent, 2000); |
| |
| ms = get_milli_second(data); |
| |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| if (data->debugging_mode) { |
| ist40xx_burst_read(data->client, |
| IST40XX_DA_ADDR(data->debugging_addr), |
| debugBuf32, |
| data->debugging_size / IST40XX_DATA_LEN, |
| true); |
| } |
| #endif |
| |
| if (data->intr_debug1_size > 0) { |
| buf32 = |
| kzalloc(data->intr_debug1_size * sizeof(u32), GFP_KERNEL); |
| if (unlikely(!buf32)) { |
| input_err(true, &data->client->dev, |
| "failed to allocate %s %d\n", __func__, |
| __LINE__); |
| goto irq_err; |
| } |
| |
| tsp_debug( |
| "Intr_debug1 (addr: 0x%08x)\n", |
| data->intr_debug1_addr); |
| ist40xx_burst_read(data->client, |
| IST40XX_DA_ADDR(data->intr_debug1_addr), |
| buf32, data->intr_debug1_size, true); |
| |
| for (i = 0; i < data->intr_debug1_size; i++) |
| tsp_debug(" %08x\n", buf32[i]); |
| kfree(buf32); |
| } |
| |
| if (data->intr_debug2_size > 0) { |
| buf32 = |
| kzalloc(data->intr_debug2_size * sizeof(u32), GFP_KERNEL); |
| if (unlikely(!buf32)) { |
| input_err(true, &data->client->dev, |
| "failed to allocate %s %d\n", __func__, |
| __LINE__); |
| goto irq_err; |
| } |
| |
| tsp_debug("Intr_debug2 (addr: 0x%08x)\n", |
| data->intr_debug2_addr); |
| ist40xx_burst_read(data->client, |
| IST40XX_DA_ADDR(data->intr_debug2_addr), |
| buf32, data->intr_debug2_size, true); |
| |
| for (i = 0; i < data->intr_debug2_size; i++) |
| tsp_debug(" %08x\n", buf32[i]); |
| kfree(buf32); |
| } |
| |
| ret = ist40xx_read_reg(data->client, IST40XX_HIB_INTR_MSG, msg); |
| if (unlikely(ret)) |
| goto irq_err; |
| |
| tsp_verb("intr msg: 0x%08x\n", *msg); |
| |
| /* TSP End Initial */ |
| if (unlikely(*msg == IST40XX_INITIAL_VALUE)) { |
| tsp_debug("IC Ready~\n"); |
| goto irq_event; |
| } |
| |
| /* TSP Recording */ |
| if (unlikely(*msg == IST40XX_REC_VALUE)) { |
| idle = true; |
| goto irq_end; |
| } |
| |
| /* TSP Debugging */ |
| if (unlikely(*msg == IST40XX_DEBUGGING_VALUE)) |
| goto irq_end; |
| |
| /* TSP IC Exception */ |
| if (unlikely((*msg & IST40XX_EXCEPT_MASK) == IST40XX_EXCEPT_VALUE)) { |
| input_err(true, &data->client->dev, |
| "Occurred IC exception(0x%02X)\n", *msg & 0xFF); |
| ret = |
| ist40xx_burst_read(data->client, IST40XX_HIB_COORD, |
| &msg[offset], IST40XX_MAX_EXCEPT_SIZE, |
| true); |
| if (unlikely(ret)) |
| input_err(true, &data->client->dev, |
| " exception value read error(%d)\n", ret); |
| else |
| input_err(true, &data->client->dev, |
| " exception value : 0x%08X, 0x%08X\n", msg[1], |
| msg[2]); |
| |
| goto irq_ic_err; |
| } |
| |
| if (unlikely(*msg == 0 || *msg == 0xFFFFFFFF)) /* Unknown CMD */ |
| goto irq_err; |
| |
| if (unlikely((*msg & CALIB_MSG_MASK) == CALIB_MSG_VALID)) { |
| if (data->status.calib == 1) { |
| ret = |
| ist40xx_burst_read(data->client, |
| IST40XX_HIB_INTR_MSG, |
| data->status.calib_msg, |
| IST40XX_MAX_CALIB_SIZE, true); |
| input_info(true, &data->client->dev, |
| "Auto calibration\n"); |
| input_info(true, &data->client->dev, |
| "SLF calib status:0x%08X\n", |
| data->status.calib_msg[0]); |
| input_info(true, &data->client->dev, |
| "MTL calib status:0x%08X\n", |
| data->status.calib_msg[1]); |
| input_info(true, &data->client->dev, |
| "MAX CH status :0x%08X\n", |
| data->status.calib_msg[2]); |
| data->status.calib = 2; |
| } else if (data->status.miscalib == 1) { |
| ret = |
| ist40xx_burst_read(data->client, |
| IST40XX_HIB_INTR_MSG, |
| data->status.miscalib_msg, |
| IST40XX_MAX_CALIB_SIZE, true); |
| input_info(true, &data->client->dev, |
| "Mis calibration\n"); |
| input_info(true, &data->client->dev, |
| "SLF calib status:0x%08X\n", |
| data->status.miscalib_msg[0]); |
| input_info(true, &data->client->dev, |
| "MTL calib status:0x%08X\n", |
| data->status.miscalib_msg[1]); |
| input_info(true, &data->client->dev, |
| "MAX CH status :0x%08X\n", |
| data->status.miscalib_msg[2]); |
| data->status.miscalib = 2; |
| } |
| goto irq_event; |
| } |
| #ifdef IST40XX_USE_CMCS |
| if (((*msg & CMCS_MSG_MASK) == CM_MSG_VALID) || |
| ((*msg & CMCS_MSG_MASK) == CM_HFREQ_MSG_VALID) || |
| ((*msg & CMCS_MSG_MASK) == CM_LFREQ_MSG_VALID) || |
| ((*msg & CMCS_MSG_MASK) == CS_MSG_VALID) || |
| ((*msg & CMCS_MSG_MASK) == CMJIT_MSG_VALID) || |
| ((*msg & CMCS_MSG_MASK) == INT_MSG_VALID)) { |
| data->status.cmcs = *msg; |
| input_info(true, &data->client->dev, "CMCS notify: 0x%08X\n", |
| *msg); |
| |
| goto irq_event; |
| } |
| #endif |
| |
| ret = PARSE_SPECIAL_MESSAGE(*msg); |
| if (unlikely(ret >= 0)) { |
| tsp_debug("special cmd: %d (0x%08X)\n", ret, *msg); |
| mutex_lock(&data->aod_lock); |
| ist40xx_special_cmd(data, ret); |
| mutex_unlock(&data->aod_lock); |
| |
| goto irq_event; |
| } |
| |
| memset(data->fingers, 0, sizeof(data->fingers)); |
| |
| /* Unknown interrupt data for extend coordinate */ |
| if (unlikely(!CHECK_INTR_STATUS(*msg))) |
| goto irq_err; |
| |
| t_status = *msg; |
| key_cnt = PARSE_KEY_CNT(t_status); |
| finger_cnt = PARSE_FINGER_CNT(t_status); |
| |
| if (unlikely((finger_cnt > data->max_fingers) || |
| (key_cnt > data->max_keys))) { |
| input_err(true, &data->client->dev, |
| "Invalid touch count - finger: %d(%d), key: %d(%d)\n", |
| finger_cnt, data->max_fingers, key_cnt, |
| data->max_keys); |
| goto irq_err; |
| } |
| |
| if (finger_cnt > 0) { |
| ret = |
| ist40xx_burst_read(data->client, IST40XX_HIB_COORD, |
| &msg[offset], finger_cnt, true); |
| if (unlikely(ret)) |
| goto irq_err; |
| |
| for (i = 0; i < finger_cnt; i++) |
| data->fingers[i].full_field = msg[i + offset]; |
| |
| if (data->jig_mode) { |
| ret = ist40xx_burst_read(data->client, |
| IST40XX_DA_ADDR(data-> |
| zvalue_addr), |
| data->z_values, finger_cnt, |
| true); |
| if (unlikely(ret)) |
| goto irq_err; |
| } |
| |
| for (i = 0; i < finger_cnt; i++) { |
| tsp_verb("intr msg(%d): 0x%08x, %d\n", |
| i + offset, msg[i + offset], |
| data->z_values[i]); |
| } |
| } |
| |
| read_cnt = finger_cnt + 1; |
| |
| ret = check_valid_coord(&msg[0], read_cnt); |
| if (unlikely(ret)) |
| goto irq_err; |
| |
| data->t_status = t_status; |
| report_input_data(data, finger_cnt, key_cnt); |
| |
| if (data->intr_debug3_size > 0) { |
| buf32 = |
| kzalloc(data->intr_debug3_size * sizeof(u32), GFP_KERNEL); |
| if (unlikely(!buf32)) { |
| input_err(true, &data->client->dev, |
| "failed to allocate %s %d\n", __func__, |
| __LINE__); |
| goto irq_err; |
| } |
| tsp_debug("Intr_debug3 (addr: 0x%08x)\n", |
| data->intr_debug3_addr); |
| ist40xx_burst_read(data->client, |
| IST40XX_DA_ADDR(data->intr_debug3_addr), |
| buf32, data->intr_debug3_size, true); |
| |
| for (i = 0; i < data->intr_debug3_size; i++) |
| tsp_debug(" %08x\n", buf32[i]); |
| kfree(buf32); |
| } |
| |
| goto irq_end; |
| |
| irq_err: |
| input_err(true, &data->client->dev, "intr msg: 0x%08x, ret: %d\n", |
| msg[0], ret); |
| ist40xx_request_reset(data); |
| goto irq_event; |
| irq_end: |
| #if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP) |
| if (data->rec_mode) |
| recording_data(data, idle); |
| if (data->debugging_mode) { |
| if ((data->debugging_scancnt == debugBuf32[0]) |
| && data->debugging_noise) |
| goto irq_event; |
| |
| memset(touch, 0, sizeof(touch)); |
| touch[0] = data->t_frame[0]; |
| touch[1] = data->t_frame[1]; |
| |
| ist40xx_put_frame(data, ms, touch, debugBuf32, |
| data->debugging_size / IST40XX_DATA_LEN); |
| data->debugging_scancnt = debugBuf32[0]; |
| } |
| #endif |
| irq_event: |
| irq_ignore: |
| data->irq_working = false; |
| data->event_ms = (u32) get_milli_second(data); |
| if (data->initialized) |
| mod_timer(&data->event_timer, |
| get_jiffies_64() + EVENT_TIMER_INTERVAL); |
| return IRQ_HANDLED; |
| |
| irq_ic_err: |
| ist40xx_scheduled_reset(data); |
| data->irq_working = false; |
| data->event_ms = (u32) get_milli_second(data); |
| if (data->initialized) |
| mod_timer(&data->event_timer, |
| get_jiffies_64() + EVENT_TIMER_INTERVAL); |
| return IRQ_HANDLED; |
| } |
| |
| static int ist40xx_pinctrl_configure(struct ist40xx_data *data, bool active) |
| { |
| struct pinctrl_state *set_state; |
| |
| int retval; |
| tsp_info("%s: %s\n", __func__, active ? "ACTIVE" : "SUSPEND"); |
| |
| set_state = pinctrl_lookup_state(data->pinctrl, |
| active ? "on_state" : "off_state"); |
| if (IS_ERR(set_state)) { |
| tsp_err("%s: cannot get active state\n", __func__); |
| return -EINVAL; |
| } |
| |
| retval = pinctrl_select_state(data->pinctrl, set_state); |
| if (retval) { |
| tsp_err("%s: cannot set pinctrl %s state\n", |
| __func__, active ? "active" : "suspend"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ist40xx_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ist40xx_data *data = i2c_get_clientdata(client); |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI cancel event call!\n", __func__); |
| msleep(100); |
| tui_force_close(1); |
| msleep(200); |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI flag force clear!\n", __func__); |
| trustedui_clear_mask(TRUSTEDUI_MODE_VIDEO_SECURED|TRUSTEDUI_MODE_INPUT_SECURED); |
| trustedui_set_mode(TRUSTEDUI_MODE_OFF); |
| } |
| } |
| #endif |
| |
| if (data->debugging_mode) |
| return 0; |
| |
| del_timer(&data->event_timer); |
| cancel_delayed_work_sync(&data->work_reset_check); |
| #ifdef IST40XX_NOISE_MODE |
| cancel_delayed_work_sync(&data->work_noise_protect); |
| #else |
| cancel_delayed_work_sync(&data->work_force_release); |
| #endif |
| cancel_delayed_work_sync(&data->work_debug_algorithm); |
| mutex_lock(&data->lock); |
| if (data->spay || data->aod || data->singletab) { |
| mutex_lock(&data->aod_lock); |
| ist40xx_disable_irq(data); |
| ist40xx_cmd_gesture(data, IST40XX_ENABLE); |
| data->status.noise_mode = false; |
| |
| if (device_may_wakeup(&data->client->dev)) |
| enable_irq_wake(data->client->irq); |
| |
| ist40xx_enable_irq(data); |
| data->status.sys_mode = STATE_LPM; |
| mutex_unlock(&data->aod_lock); |
| } else { |
| ist40xx_disable_irq(data); |
| ist40xx_power_off(data); |
| data->status.sys_mode = STATE_POWER_OFF; |
| if (data->pinctrl) { |
| int ret = ist40xx_pinctrl_configure(data, false); |
| if (ret) |
| input_err(true, &data->client->dev, "%s: cannot set pinctrl state\n", |
| __func__); |
| } |
| } |
| clear_input_data(data); |
| mutex_unlock(&data->lock); |
| |
| return 0; |
| } |
| |
| static int ist40xx_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ist40xx_data *data = i2c_get_clientdata(client); |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI cancel event call!\n", __func__); |
| msleep(100); |
| tui_force_close(1); |
| msleep(200); |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI flag force clear!\n", __func__); |
| trustedui_clear_mask(TRUSTEDUI_MODE_VIDEO_SECURED|TRUSTEDUI_MODE_INPUT_SECURED); |
| trustedui_set_mode(TRUSTEDUI_MODE_OFF); |
| } |
| } |
| #endif |
| |
| if (!data->initialized) { |
| input_err(true, &data->client->dev, |
| "IC initialize is not complete\n"); |
| return 0; |
| } |
| |
| data->noise_mode |= (1 << NOISE_MODE_POWER); |
| |
| if (data->debugging_mode && (data->status.sys_mode == STATE_POWER_ON)) |
| return 0; |
| |
| mutex_lock(&data->lock); |
| if (data->status.sys_mode == STATE_LPM) { |
| mutex_lock(&data->aod_lock); |
| ist40xx_cmd_gesture(data, IST40XX_DISABLE); |
| mod_timer(&data->event_timer, |
| get_jiffies_64() + EVENT_TIMER_INTERVAL * 2); |
| data->status.noise_mode = true; |
| |
| if (device_may_wakeup(&data->client->dev)) |
| disable_irq_wake(data->client->irq); |
| |
| data->status.sys_mode = STATE_POWER_ON; |
| mutex_unlock(&data->aod_lock); |
| } else { |
| if (data->pinctrl) { |
| int ret = ist40xx_pinctrl_configure(data, true); |
| if (ret) |
| input_err(true, &data->client->dev, "%s: cannot set pinctrl state\n", |
| __func__); |
| } |
| |
| if (data->status.sys_mode == STATE_POWER_ON) |
| ist40xx_reset(data, false); |
| else if (data->status.sys_mode == STATE_POWER_OFF) |
| ist40xx_power_on(data, false); |
| ist40xx_enable_irq(data); |
| ist40xx_start(data); |
| data->status.sys_mode = STATE_POWER_ON; |
| } |
| mutex_unlock(&data->lock); |
| |
| return 0; |
| } |
| |
| #ifdef USE_OPEN_CLOSE |
| static void ist40xx_ts_close(struct input_dev *dev) |
| { |
| struct ist40xx_data *data = input_get_drvdata(dev); |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI cancel event call!\n", __func__); |
| msleep(100); |
| tui_force_close(1); |
| msleep(200); |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI flag force clear!\n", __func__); |
| trustedui_clear_mask(TRUSTEDUI_MODE_VIDEO_SECURED|TRUSTEDUI_MODE_INPUT_SECURED); |
| trustedui_set_mode(TRUSTEDUI_MODE_OFF); |
| } |
| } |
| #endif |
| |
| if (!data->info_work_done) { |
| input_err(true, &data->client->dev, "%s not finished info work\n", __func__); |
| return; |
| } |
| |
| input_info(true, &data->client->dev, "%s\n", __func__); |
| |
| #ifdef TCLM_CONCEPT |
| sec_tclm_debug_info(data->tdata); |
| #endif |
| |
| ist40xx_suspend(&data->client->dev); |
| } |
| |
| static int ist40xx_ts_open(struct input_dev *dev) |
| { |
| struct ist40xx_data *data = input_get_drvdata(dev); |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI cancel event call!\n", __func__); |
| msleep(100); |
| tui_force_close(1); |
| msleep(200); |
| if(TRUSTEDUI_MODE_TUI_SESSION & trustedui_get_current_mode()){ |
| tsp_err("%s TUI flag force clear!\n", __func__); |
| trustedui_clear_mask(TRUSTEDUI_MODE_VIDEO_SECURED|TRUSTEDUI_MODE_INPUT_SECURED); |
| trustedui_set_mode(TRUSTEDUI_MODE_OFF); |
| } |
| } |
| #endif |
| |
| if (!data->info_work_done) { |
| input_err(true, &data->client->dev, "%s not finished info work\n", __func__); |
| return 0; |
| } |
| |
| input_info(true, &data->client->dev, "%s\n", __func__); |
| |
| return ist40xx_resume(&data->client->dev); |
| } |
| #elif defined(CONFIG_HAS_EARLYSUSPEND) |
| static void ist40xx_early_suspend(struct early_suspend *h) |
| { |
| struct ist40xx_data *data = container_of(h, struct ist40xx_data, |
| early_suspend); |
| |
| ist40xx_suspend(&data->client->dev); |
| } |
| |
| static void ist40xx_late_resume(struct early_suspend *h) |
| { |
| struct ist40xx_data *data = container_of(h, struct ist40xx_data, |
| early_suspend); |
| |
| ist40xx_resume(&data->client->dev); |
| } |
| #endif |
| |
| void ist40xx_set_ta_mode(bool mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_TA) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, |
| mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_TA); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_TA); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| } |
| |
| EXPORT_SYMBOL(ist40xx_set_ta_mode); |
| |
| void ist40xx_set_edge_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, |
| mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_EDGE); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_EDGE); |
| |
| if (data->status.sys_mode != STATE_POWER_OFF) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| } |
| |
| EXPORT_SYMBOL(ist40xx_set_edge_mode); |
| |
| void ist40xx_set_call_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_CALL) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, |
| mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_CALL); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_CALL); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| } |
| |
| EXPORT_SYMBOL(ist40xx_set_call_mode); |
| |
| void ist40xx_set_cover_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_COVER) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, |
| mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_COVER); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_COVER); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| } |
| |
| EXPORT_SYMBOL(ist40xx_set_cover_mode); |
| |
| void ist40xx_set_glove_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_GLOVE) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, |
| mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_GLOVE); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_GLOVE); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | |
| (data->noise_mode & 0xFFFF))); |
| } |
| |
| EXPORT_SYMBOL(ist40xx_set_glove_mode); |
| |
| void ist40xx_set_sensitivity_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_SENSITIVITY) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_SENSITIVITY); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_SENSITIVITY); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | (data->noise_mode & 0xFFFF))); |
| } |
| EXPORT_SYMBOL(ist40xx_set_sensitivity_mode); |
| |
| void ist40xx_set_touchable_mode(int mode) |
| { |
| struct ist40xx_data *data = ts_data; |
| |
| if (unlikely(mode == ((data->noise_mode >> NOISE_MODE_TOUCHABLE) & 1))) |
| return; |
| |
| input_info(true, &data->client->dev, "%s(), mode = %d\n", __func__, mode); |
| |
| if (mode) |
| data->noise_mode |= (1 << NOISE_MODE_TOUCHABLE); |
| else |
| data->noise_mode &= ~(1 << NOISE_MODE_TOUCHABLE); |
| |
| if (data->initialized && (data->status.sys_mode != STATE_POWER_OFF)) |
| ist40xx_write_cmd(data, IST40XX_HIB_CMD, |
| ((eHCOM_SET_MODE_SPECIAL << 16) | (data->noise_mode & 0xFFFF))); |
| } |
| EXPORT_SYMBOL(ist40xx_set_touchable_mode); |
| |
| #ifdef USE_TSP_TA_CALLBACKS |
| void charger_enable(struct tsp_callbacks *cb, int enable) |
| { |
| bool charging = enable ? true : false; |
| |
| ist40xx_set_ta_mode(charging); |
| } |
| |
| static void ist40xx_register_callback(struct tsp_callbacks *cb) |
| { |
| charger_callbacks = cb; |
| pr_info("%s\n", __func__); |
| } |
| #endif |
| |
| #if defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER) || defined(CONFIG_MUIC_NOTIFIER) |
| static int otg_flag = 0; |
| #endif |
| |
| #ifdef CONFIG_USB_TYPEC_MANAGER_NOTIFIER |
| static int tsp_ccic_notification(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| CC_NOTI_USB_STATUS_TYPEDEF usb_status = |
| *(CC_NOTI_USB_STATUS_TYPEDEF *) data; |
| |
| switch (usb_status.drp) { |
| case USB_STATUS_NOTIFY_ATTACH_DFP: |
| otg_flag = 1; |
| tsp_info("%s : otg_flag 1\n", __func__); |
| break; |
| case USB_STATUS_NOTIFY_DETACH: |
| otg_flag = 0; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| #else |
| #ifdef CONFIG_MUIC_NOTIFIER |
| static int tsp_muic_notification(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| muic_attached_dev_t attached_dev = *(muic_attached_dev_t *) data; |
| |
| switch (action) { |
| case MUIC_NOTIFY_CMD_DETACH: |
| case MUIC_NOTIFY_CMD_LOGICALLY_DETACH: |
| otg_flag = 0; |
| break; |
| case MUIC_NOTIFY_CMD_ATTACH: |
| case MUIC_NOTIFY_CMD_LOGICALLY_ATTACH: |
| if (attached_dev == ATTACHED_DEV_OTG_MUIC) { |
| otg_flag = 1; |
| tsp_info("%s : otg_flag 1\n", __func__); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |
| #endif |
| |
| #ifdef CONFIG_VBUS_NOTIFIER |
| static int tsp_vbus_notification(struct notifier_block *nb, |
| unsigned long cmd, void *data) |
| { |
| vbus_status_t vbus_type = *(vbus_status_t *) data; |
| |
| tsp_info("%s cmd=%lu, vbus_type=%d\n", __func__, cmd, vbus_type); |
| |
| switch (vbus_type) { |
| case STATUS_VBUS_HIGH: |
| tsp_info("%s : attach\n", __func__); |
| #if defined(CONFIG_USB_TYPEC_MANAGER_NOTIFIER) || defined(CONFIG_MUIC_NOTIFIER) |
| if (!otg_flag) |
| #endif |
| ist40xx_set_ta_mode(true); |
| break; |
| case STATUS_VBUS_LOW: |
| tsp_info("%s : detach\n", __func__); |
| ist40xx_set_ta_mode(false); |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| static void reset_work_func(struct work_struct *work) |
| { |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct ist40xx_data *data = |
| container_of(delayed_work, struct ist40xx_data, |
| work_reset_check); |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if (TRUSTEDUI_MODE_INPUT_SECURED & trustedui_get_current_mode()) { |
| input_err(true, &data->client->dev, |
| "%s return, TUI is enabled!\n", __func__); |
| return; |
| } |
| #endif |
| |
| if (unlikely((data == NULL) || (data->client == NULL))) |
| return; |
| |
| input_info(true, &data->client->dev, "Request reset function\n"); |
| |
| if (likely((data->initialized == 1) && (data->status.sys_mode != STATE_POWER_OFF) && |
| (data->status.update != 1) && (data->status.calib < 1) && |
| (data->status.miscalib < 1))) { |
| mutex_lock(&data->lock); |
| ist40xx_disable_irq(data); |
| ist40xx_reset(data, false); |
| clear_input_data(data); |
| ist40xx_enable_irq(data); |
| ist40xx_start(data); |
| mutex_unlock(&data->lock); |
| } |
| } |
| |
| #ifdef IST40XX_NOISE_MODE |
| static void noise_work_func(struct work_struct *work) |
| { |
| int ret; |
| u32 touch_status = 0; |
| u32 scan_count = 0; |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct ist40xx_data *data = |
| container_of(delayed_work, struct ist40xx_data, |
| work_noise_protect); |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| if (TRUSTEDUI_MODE_INPUT_SECURED & trustedui_get_current_mode()) { |
| input_err(true, &data->client->dev, |
| "%s return, TUI is enabled!\n", __func__); |
| return; |
| } |
| #endif |
| ret = ist40xx_read_reg(data->client, IST40XX_HIB_TOUCH_STATUS, |
| &touch_status); |
| if (unlikely(ret)) { |
| tsp_warn("Touch status read fail!\n"); |
| goto retry_timer; |
| } |
| |
| tsp_verb("Touch Info: 0x%08x\n", touch_status); |
| |
| /* Check valid scan count */ |
| if (unlikely((touch_status & TOUCH_STATUS_MASK) != TOUCH_STATUS_MAGIC)) { |
| tsp_warn("Touch status is not corrected! (0x%08x)\n", |
| touch_status); |
| goto retry_timer; |
| } |
| |
| /* Status of IC is idle */ |
| if (GET_FINGER_ENABLE(touch_status) == 0) { |
| if ((PARSE_FINGER_CNT(data->t_status) > 0) || |
| (PARSE_KEY_CNT(data->t_status) > 0)) |
| clear_input_data(data); |
| } |
| |
| scan_count = GET_SCAN_CNT(touch_status); |
| |
| /* Status of IC is lock-up */ |
| if (unlikely(scan_count == data->scan_count)) { |
| tsp_warn("TSP IC is not responded! (0x%08x)\n", scan_count); |
| goto retry_timer; |
| } |
| |
| data->scan_retry = 0; |
| data->scan_count = scan_count; |
| return; |
| |
| retry_timer: |
| data->scan_retry++; |
| tsp_warn("Retry touch status!(%d)\n", data->scan_retry); |
| |
| if (unlikely(data->scan_retry >= data->max_scan_retry)) { |
| ist40xx_scheduled_reset(data); |
| data->scan_retry = 0; |
| } |
| } |
| #else |
| static void release_work_func(struct work_struct *work) |
| { |
| int ret; |
| u32 touch_status = 0; |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct ist40xx_data *data = |
| container_of(delayed_work, struct ist40xx_data, |
| work_force_release); |
| |
| if ((PARSE_FINGER_CNT(data->t_status) == 0) && |
| (PARSE_KEY_CNT(data->t_status) == 0)) |
| return; |
| |
| ret = ist40xx_read_reg(data->client, IST40XX_HIB_TOUCH_STATUS, |
| &touch_status); |
| if (unlikely(ret)) { |
| tsp_warn("Touch status read fail!\n"); |
| return; |
| } |
| |
| tsp_verb("Touch Info: 0x%08x\n", touch_status); |
| |
| /* Check valid scan count */ |
| if (unlikely((touch_status & TOUCH_STATUS_MASK) != TOUCH_STATUS_MAGIC)) { |
| tsp_warn("Touch status is not corrected! (0x%08x)\n", |
| touch_status); |
| return; |
| } |
| |
| /* Status of IC is idle */ |
| if (GET_FINGER_ENABLE(touch_status) == 0) |
| clear_input_data(data); |
| } |
| #endif |
| |
| static void debug_work_func(struct work_struct *work) |
| { |
| int ret = -EPERM; |
| int i; |
| u32 *buf32; |
| |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct ist40xx_data *data = container_of(delayed_work, |
| struct ist40xx_data, |
| work_debug_algorithm); |
| |
| buf32 = kzalloc(data->algr_size * sizeof(u32), GFP_KERNEL); |
| if (unlikely(!buf32)) { |
| input_err(true, &data->client->dev, |
| "failed to allocate %s %d\n", __func__, __LINE__); |
| return; |
| } |
| ret = ist40xx_burst_read(data->client, IST40XX_DA_ADDR(data->algr_addr), |
| buf32, data->algr_size, true); |
| if (ret) { |
| tsp_warn("Algorithm mem addr read fail!\n"); |
| kfree(buf32); |
| return; |
| } |
| |
| input_info(true, &data->client->dev, "algorithm struct\n"); |
| for (i = 0; i < data->algr_size; i++) |
| input_info(true, &data->client->dev, " 0x%08x\n", buf32[i]); |
| |
| kfree(buf32); |
| } |
| |
| void timer_handler(unsigned long timer_data) |
| { |
| struct ist40xx_data *data = (struct ist40xx_data *)timer_data; |
| struct ist40xx_status *status = &data->status; |
| |
| if (data->irq_working || !data->initialized || data->rec_mode) |
| goto restart_timer; |
| |
| if (status->event_mode) { |
| if (likely |
| ((status->sys_mode != STATE_POWER_OFF) |
| && (status->update != 1) && (status->calib < 1) |
| && (status->miscalib < 1))) { |
| data->timer_ms = (u32) get_milli_second(data); |
| |
| if (likely(status->noise_mode)) { |
| /* 100ms after last interrupt */ |
| if (data->timer_ms - data->event_ms > 100) { |
| #ifdef IST40XX_NOISE_MODE |
| schedule_delayed_work(&data-> |
| work_noise_protect, |
| 0); |
| #else |
| schedule_delayed_work(&data-> |
| work_force_release, |
| 0); |
| #endif |
| } |
| } |
| |
| if (data->algr_size > 0) { |
| /* 100ms after last interrupt */ |
| if (data->timer_ms - data->event_ms > 100) |
| schedule_delayed_work(&data-> |
| work_debug_algorithm, |
| 0); |
| } |
| } |
| } |
| |
| restart_timer: |
| mod_timer(&data->event_timer, get_jiffies_64() + EVENT_TIMER_INTERVAL); |
| } |
| |
| #ifdef CONFIG_OF |
| static int ist40xx_parse_dt(struct device *dev, struct ist40xx_data *data) |
| { |
| struct device_node *np = dev->of_node; |
| u32 px_zone[3]; |
| |
| data->dt_data->irq_gpio = of_get_named_gpio(np, "imagis,irq-gpio", 0); |
| |
| data->dt_data->is_power_by_gpio = |
| of_property_read_bool(np, "imagis,power-gpioen"); |
| if (data->dt_data->is_power_by_gpio) { |
| data->dt_data->power_gpio = |
| of_get_named_gpio(np, "imagis,power-gpio", 0); |
| } else { |
| data->dt_data->power_gpio = -1; |
| if (of_property_read_string(np, "imagis,regulator_avdd", |
| &data->dt_data->regulator_avdd)) { |
| input_err(true, dev, |
| "%s: Failed to get regulator_avdd name property\n", |
| __func__); |
| } |
| } |
| |
| if (of_property_read_u32(np, "imagis,fw-bin", &data->dt_data->fw_bin) >= |
| 0) |
| input_info(true, dev, "%s() fw-bin: %d\n", __func__, |
| data->dt_data->fw_bin); |
| |
| if (of_property_read_string(np, "imagis,ic-version", |
| &data->dt_data->ic_version) >= 0) |
| input_info(true, dev, "%s() ic_version: %s\n", __func__, |
| data->dt_data->ic_version); |
| |
| if (of_property_read_string(np, "imagis,project-name", |
| &data->dt_data->project_name) >= 0) |
| input_info(true, dev, "%s() project_name: %s\n", __func__, |
| data->dt_data->project_name); |
| |
| if (data->dt_data->ic_version && data->dt_data->project_name) { |
| snprintf(data->dt_data->fw_path, FIRMWARE_PATH_LENGTH, |
| "%s%s_%s.fw", FIRMWARE_PATH, |
| data->dt_data->ic_version, |
| data->dt_data->project_name); |
| input_info(true, dev, "%s() firm path: %s\n", __func__, |
| data->dt_data->fw_path); |
| |
| #ifdef IST40XX_USE_CMCS |
| snprintf(data->dt_data->cmcs_path, FIRMWARE_PATH_LENGTH, |
| "%s%s_%s_cmcs.bin", FIRMWARE_PATH, |
| data->dt_data->ic_version, |
| data->dt_data->project_name); |
| input_info(true, dev, "%s() cmcs bin path: %s\n", __func__, |
| data->dt_data->cmcs_path); |
| #endif |
| } |
| #ifdef IST40XX_USE_KEY |
| data->dt_data->tkey_use_sec_sysfs = |
| of_property_read_bool(np, "imagis,use-sec-sysfs"); |
| #endif |
| |
| if (of_property_read_u32(np, "imagis,octa-hw", &data->dt_data->octa_hw) |
| >= 0) |
| input_info(true, dev, "%s() octa-hw: %d\n", __func__, |
| data->dt_data->octa_hw); |
| |
| if (of_property_read_u32_array(np, "imagis,area-size", px_zone, 3)) { |
| tsp_err("%s: Failed to get zone's size\n", __func__); |
| data->dt_data->area_indicator = 63; |
| data->dt_data->area_navigation = 126; |
| data->dt_data->area_edge = 60; |
| } else { |
| data->dt_data->area_indicator = px_zone[0]; |
| data->dt_data->area_navigation = px_zone[1]; |
| data->dt_data->area_edge = px_zone[2]; |
| } |
| |
| if (of_property_read_u32(np, "imagis,factory_item_version", &data->dt_data->item_version) < 0) |
| data->dt_data->item_version = 0; |
| |
| input_info(true, dev, "%s() irq:%d, tsp_ldo: %s\n", __func__, |
| data->dt_data->irq_gpio, data->dt_data->regulator_avdd); |
| |
| input_info(true, dev, "%s() power source by gpio:%d, power_gpio: %d\n", |
| __func__, data->dt_data->is_power_by_gpio, |
| data->dt_data->power_gpio); |
| |
| return 0; |
| } |
| |
| void sec_tclm_parse_dt(struct i2c_client *client, struct sec_tclm_data *tdata) |
| { |
| struct device *dev = &client->dev; |
| struct device_node *np = dev->of_node; |
| |
| if (of_property_read_u32(np, "imagis,tclm_level", &tdata->tclm_level) < 0) { |
| tdata->tclm_level = 0; |
| input_err(true, dev, "%s: Failed to get tclm_level property\n", __func__); |
| } |
| |
| if (of_property_read_u32(np, "imagis,afe_base", &tdata->afe_base) < 0) { |
| tdata->afe_base = 0; |
| input_err(true, dev, "%s: Failed to get afe_base property\n", __func__); |
| } |
| |
| input_err(true, &client->dev, "%s: tclm_level %d, afe_base %04X\n", __func__, |
| tdata->tclm_level, tdata->afe_base); |
| } |
| |
| static void ist40xx_request_gpio(struct i2c_client *client, |
| struct ist40xx_data *data) |
| { |
| int ret; |
| |
| input_info(true, &client->dev, "%s\n", __func__); |
| |
| if (gpio_is_valid(data->dt_data->irq_gpio)) { |
| ret = gpio_request(data->dt_data->irq_gpio, "imagis,irq_gpio"); |
| if (ret) { |
| input_err(true, &client->dev, |
| "%s: unable to request irq_gpio [%d]\n", |
| __func__, data->dt_data->irq_gpio); |
| return; |
| } |
| |
| ret = gpio_direction_input(data->dt_data->irq_gpio); |
| if (ret) { |
| input_err(true, &client->dev, |
| "%s: unable to set direction for gpio [%d]\n", |
| __func__, data->dt_data->irq_gpio); |
| } |
| client->irq = gpio_to_irq(data->dt_data->irq_gpio); |
| } |
| |
| if (gpio_is_valid(data->dt_data->power_gpio)) { |
| ret = |
| gpio_request(data->dt_data->power_gpio, |
| "imagis,power_gpio"); |
| if (ret) { |
| input_err(true, &client->dev, |
| "%s: unable to request power_gpio [%d]\n", |
| __func__, data->dt_data->power_gpio); |
| return; |
| } |
| |
| ret = gpio_direction_output(data->dt_data->power_gpio, 1); |
| if (ret) { |
| input_err(true, &client->dev, |
| "%s: unable to set direction for gpio [%d]\n", |
| __func__, data->dt_data->power_gpio); |
| } |
| } |
| } |
| |
| static void ist40xx_free_gpio(struct ist40xx_data *data) |
| { |
| tsp_info("%s\n", __func__); |
| |
| if (gpio_is_valid(data->dt_data->irq_gpio)) |
| gpio_free(data->dt_data->irq_gpio); |
| |
| if (gpio_is_valid(data->dt_data->power_gpio)) |
| gpio_free(data->dt_data->power_gpio); |
| } |
| #endif |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| void trustedui_mode_ist_on(void) |
| { |
| tsp_info("%s, release all finger..", __func__); |
| clear_input_data(tui_tsp_info); |
| |
| del_timer(&tui_tsp_info->event_timer); |
| |
| cancel_delayed_work_sync(&tui_tsp_info->work_reset_check); |
| #ifdef IST40XX_NOISE_MODE |
| cancel_delayed_work_sync(&tui_tsp_info->work_noise_protect); |
| #else |
| cancel_delayed_work_sync(&tui_tsp_info->work_force_release); |
| #endif |
| cancel_delayed_work_sync(&tui_tsp_info->work_debug_algorithm); |
| tui_tsp_info->status.noise_mode = false; |
| } |
| EXPORT_SYMBOL(trustedui_mode_ist_on); |
| |
| void trustedui_mode_ist_off(void) |
| { |
| tsp_info("%s ", __func__); |
| |
| tui_tsp_info->status.noise_mode = true; |
| |
| mod_timer(&tui_tsp_info->event_timer, get_jiffies_64() + (HZ * tui_tsp_info->timer_period_ms / 1000)); //EVENT_TIMER_INTERVAL |
| } |
| EXPORT_SYMBOL(trustedui_mode_ist_off); |
| #endif |
| |
| static void ist40xx_run_rawdata(struct ist40xx_data *data) |
| { |
| data->tsp_dump_lock = 1; |
| input_raw_data_clear(); |
| input_raw_info(true, &data->client->dev, "%s: start ##\n", __func__); |
| ist40xx_display_dump_log(data); |
| /*msleep(100);*/ |
| input_raw_info(true, &data->client->dev, "%s: done ##\n", __func__); |
| data->tsp_dump_lock = 0; |
| } |
| |
| |
| #if defined(CONFIG_TOUCHSCREEN_DUMP_MODE) |
| #include <linux/sec_debug.h> |
| extern struct tsp_dump_callbacks dump_callbacks; |
| static struct delayed_work *p_ghost_check; |
| |
| static void ist40xx_check_rawdata(struct work_struct *work) |
| { |
| struct ist40xx_data *data = container_of(work, struct ist40xx_data, |
| ghost_check.work); |
| |
| if (data->tsp_dump_lock == 1) { |
| input_info(true, &data->client->dev, |
| "%s: ignored ## already checking..\n", __func__); |
| return; |
| } |
| if (data->status.sys_mode == STATE_POWER_OFF) { |
| input_info(true, &data->client->dev, |
| "%s: ignored ## IC is power off\n", __func__); |
| return; |
| } |
| |
| ist40xx_run_rawdata(data); |
| } |
| |
| static void dump_tsp_log(void) |
| { |
| tsp_info("%s: start\n", __func__); |
| |
| #ifdef CONFIG_BATTERY_SAMSUNG |
| if (lpcharge == 1) { |
| tsp_info("%s: ignored ## lpm charging Mode!!\n",__func__); |
| return; |
| } |
| #endif |
| |
| if (p_ghost_check == NULL) { |
| tsp_info("%s: ignored ## tsp probe fail!!\n", __func__); |
| return; |
| } |
| |
| schedule_delayed_work(p_ghost_check, msecs_to_jiffies(100)); |
| } |
| #endif |
| |
| static void ist40xx_read_info_work(struct work_struct *work) |
| { |
| struct ist40xx_data *data = container_of(work, struct ist40xx_data, |
| work_read_info.work); |
| #ifdef TCLM_CONCEPT |
| u32 buff; |
| int ret; |
| |
| ist40xx_read_sec_info(data, IST40XX_NVM_OFFSET_FAC_RESULT, &buff, 1); |
| data->test_result.data[0] = buff & 0xff; |
| ret = sec_tclm_check_cal_case(data->tdata); /*this function will call ist40xx_tclm_data_read*/ |
| |
| input_info(true, &data->client->dev, "%s: sec_tclm_check_cal_case result %d; test result %X\n", |
| __func__, ret, data->test_result.data[0]); |
| #endif |
| input_log_fix(); |
| // for rawdata |
| ist40xx_run_rawdata(data); |
| data->info_work_done = true; |
| } |
| |
| static int ist40xx_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| int i; |
| // int retry = 3; |
| struct ist40xx_data *data; |
| struct sec_tclm_data *tdata = NULL; |
| struct input_dev *input_dev; |
| |
| input_info(true, &client->dev, |
| "### IMAGIS probe(ver:%s, addr:0x%02X) ###\n", |
| IMAGIS_TSP_DD_VERSION, client->addr); |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| printk(KERN_INFO "i2c_check_functionality error\n"); |
| return -EIO; |
| } |
| |
| data = kzalloc(sizeof(struct ist40xx_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| #ifdef CONFIG_OF |
| // TODO: Load device tree. |
| data->dt_data = NULL; |
| if (client->dev.of_node) { |
| data->dt_data = |
| kzalloc(sizeof(struct ist40xx_dt_data), GFP_KERNEL); |
| if (unlikely(!data->dt_data)) { |
| input_err(true, &client->dev, |
| "failed to allocate dt data\n"); |
| goto err_alloc_dev; |
| } |
| |
| ret = ist40xx_parse_dt(&client->dev, data); |
| if (unlikely(ret)) |
| goto err_alloc_dev; |
| tdata = kzalloc(sizeof(struct sec_tclm_data), GFP_KERNEL); |
| if (!tdata) |
| goto error_alloc_tdata; |
| sec_tclm_parse_dt(client, tdata); |
| } else { |
| data->dt_data = NULL; |
| input_err(true, &client->dev, "don't exist of_node\n"); |
| goto err_alloc_dev; |
| } |
| |
| ist40xx_request_gpio(client, data); |
| |
| /* Get pinctrl if target uses pinctrl */ |
| data->pinctrl = devm_pinctrl_get(&client->dev); |
| if (IS_ERR(data->pinctrl)) { |
| if (PTR_ERR(data->pinctrl) == -EPROBE_DEFER) |
| goto err_pinctrl; |
| |
| input_err(true, &client->dev, "%s: Target does not use pinctrl\n", __func__); |
| data->pinctrl = NULL; |
| } |
| |
| if (data->pinctrl) { |
| ret = ist40xx_pinctrl_configure(data, true); |
| if (ret) |
| input_err(true, &client->dev, "%s: cannot set pinctrl state\n", __func__); |
| } |
| |
| #endif |
| |
| input_dev = input_allocate_device(); |
| if (unlikely(!input_dev)) { |
| input_err(true, &client->dev, "input_allocate_device failed\n"); |
| goto err_alloc_dt; |
| } |
| |
| input_info(true, &client->dev, "client->irq : %d\n", client->irq); |
| data->client = client; |
| data->input_dev = input_dev; |
| i2c_set_clientdata(client, data); |
| |
| data->tdata = tdata; |
| if (!data->tdata) |
| goto err_null_data; |
| |
| #ifdef TCLM_CONCEPT |
| sec_tclm_initialize(data->tdata); |
| data->tdata->client = data->client; |
| data->tdata->tclm_read = ist40xx_tclm_data_read; |
| data->tdata->tclm_write = ist40xx_tclm_data_write; |
| data->tdata->tclm_execute_force_calibration = ist40xx_execute_force_calibration; |
| data->tdata->external_factory = false; |
| #endif |
| INIT_DELAYED_WORK(&data->work_read_info, ist40xx_read_info_work); |
| |
| #ifdef USE_OPEN_CLOSE |
| input_dev->open = ist40xx_ts_open; |
| input_dev->close = ist40xx_ts_close; |
| #endif |
| #ifdef CONFIG_HAS_EARLYSUSPEND |
| data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1; |
| data->early_suspend.suspend = ist40xx_early_suspend; |
| data->early_suspend.resume = ist40xx_late_resume; |
| register_early_suspend(&data->early_suspend); |
| #endif |
| |
| data->max_fingers = IST40XX_MAX_FINGERS; |
| data->max_keys = IST40XX_MAX_KEYS; |
| data->irq_enabled = false; |
| data->status.event_mode = false; |
| mutex_init(&data->lock); |
| mutex_init(&data->aod_lock); |
| mutex_init(&data->i2c_lock); |
| ts_data = data; |
| |
| /* initialize data variable */ |
| data->ignore_delay = false; |
| data->irq_working = false; |
| data->max_scan_retry = 2; |
| data->max_irq_err_cnt = IST40XX_MAX_ERR_CNT; |
| data->report_rate = -1; |
| data->idle_rate = -1; |
| data->timer_period_ms = 500; |
| data->spay = false; |
| data->aod = false; |
| data->singletab = false; |
| data->status.sys_mode = STATE_POWER_ON; |
| data->rec_mode = 0; |
| data->rec_file_name = kzalloc(IST40XX_REC_FILENAME_SIZE, GFP_KERNEL); |
| data->debug_mode = 0; |
| data->debugging_mode = 0; |
| data->debugging_noise = 1; |
| data->checksum_result = 0; |
| data->time_longest = 0; |
| data->multi_count = 0; |
| data->all_finger_count = 0; |
| data->all_aod_tsp_count = 0; |
| data->all_spay_count = 0; |
| data->info_work_done = false; |
| #ifdef CONFIG_SEC_FACTORY |
| data->jig_mode = 1; |
| #endif |
| for (i = 0; i < IST40XX_MAX_FINGERS; i++) |
| data->tsp_touched[i] = false; |
| #ifdef IST40XX_USE_KEY |
| for (i = 0; i < IST40XX_MAX_KEYS; i++) |
| data->tkey_pressed[i] = false; |
| #endif |
| #ifdef USE_SPONGE_LIB |
| data->lpm_mode = 0; |
| for (i = 0; i < 4; i++) |
| data->rect_data[i] = 0; |
| #else |
| data->g_reg.b.w = 0; |
| data->g_reg.b.h = 0; |
| data->g_reg.b.x = 0; |
| data->g_reg.b.y = 0; |
| #endif |
| |
| /* init irq thread */ |
| ret = request_threaded_irq(client->irq, NULL, ist40xx_irq_thread, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT | |
| IRQF_DISABLED, "ist40xx_ts", data); |
| if (unlikely(ret)) |
| goto err_init_drv; |
| |
| /* system power init */ |
| ret = ist40xx_init_system(data); |
| if (unlikely(ret)) { |
| input_err(true, &data->client->dev, |
| "chip initialization failed\n"); |
| goto err_init_drv; |
| } |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| trustedui_set_tsp_irq(client->irq); |
| input_info(true, &data->client->dev, "%s[%d] called!\n", __func__, |
| client->irq); |
| #endif |
| |
| #ifdef IST40XX_INTERNAL_BIN |
| ret = ist40xx_auto_bin_update(data); |
| if (unlikely(ret == 0)) |
| goto err_irq; |
| #endif |
| |
| ret = ist40xx_get_info(data); |
| input_info(true, &data->client->dev, "Get info: %s\n", |
| (ret == 0 ? "success" : "fail")); |
| if (unlikely(ret)) |
| goto err_read_info; |
| |
| ret = ist40xx_init_update_sysfs(data); |
| if (unlikely(ret)) |
| goto err_sysfs; |
| |
| ret = ist40xx_init_misc_sysfs(data); |
| if (unlikely(ret)) |
| goto err_sysfs; |
| |
| #ifdef IST40XX_USE_CMCS |
| ret = ist40xx_init_cmcs_sysfs(data); |
| if (unlikely(ret)) |
| goto err_sysfs; |
| #endif |
| |
| #ifdef SEC_FACTORY_MODE |
| ret = sec_touch_sysfs(data); |
| if (unlikely(ret)) |
| goto err_sec_sysfs; |
| #endif |
| input_info(true, &data->client->dev, "Create sysfs!!\n"); |
| |
| INIT_DELAYED_WORK(&data->work_reset_check, reset_work_func); |
| #ifdef IST40XX_NOISE_MODE |
| INIT_DELAYED_WORK(&data->work_noise_protect, noise_work_func); |
| #else |
| INIT_DELAYED_WORK(&data->work_force_release, release_work_func); |
| #endif |
| INIT_DELAYED_WORK(&data->work_debug_algorithm, debug_work_func); |
| |
| init_timer(&data->event_timer); |
| data->event_timer.data = (unsigned long)data; |
| data->event_timer.function = timer_handler; |
| data->event_timer.expires = jiffies_64 + EVENT_TIMER_INTERVAL; |
| mod_timer(&data->event_timer, |
| get_jiffies_64() + EVENT_TIMER_INTERVAL * 2); |
| |
| #ifdef USE_TSP_TA_CALLBACKS |
| data->callbacks.inform_charger = charger_enable; |
| ist40xx_register_callback(&data->callbacks); |
| #endif |
| #ifdef CONFIG_USB_TYPEC_MANAGER_NOTIFIER |
| manager_notifier_register(&data->ccic_nb, tsp_ccic_notification, |
| MANAGER_NOTIFY_CCIC_USB); |
| #else |
| #ifdef CONFIG_MUIC_NOTIFIER |
| muic_notifier_register(&data->muic_nb, tsp_muic_notification, |
| MUIC_NOTIFY_DEV_CHARGER); |
| #endif |
| #endif |
| #ifdef CONFIG_VBUS_NOTIFIER |
| vbus_notifier_register(&data->vbus_nb, tsp_vbus_notification, |
| VBUS_NOTIFY_DEV_CHARGER); |
| #endif |
| |
| device_init_wakeup(&client->dev, true); |
| |
| ist40xx_start(data); |
| data->initialized = true; |
| |
| #ifdef CONFIG_TRUSTONIC_TRUSTED_UI |
| tui_tsp_info = data; |
| #endif |
| |
| schedule_delayed_work(&data->work_read_info, msecs_to_jiffies(500)); |
| |
| #if defined(CONFIG_TOUCHSCREEN_DUMP_MODE) |
| dump_callbacks.inform_dump = dump_tsp_log; |
| INIT_DELAYED_WORK(&data->ghost_check, ist40xx_check_rawdata); |
| p_ghost_check = &data->ghost_check; |
| #endif |
| input_info(true, &data->client->dev, "### IMAGIS probe success ###\n"); |
| |
| return 0; |
| |
| #ifdef SEC_FACTORY_MODE |
| err_sec_sysfs: |
| sec_touch_sysfs_remove(data); |
| sec_cmd_exit(&data->sec, SEC_CLASS_DEVT_TSP); |
| #endif |
| err_sysfs: |
| class_destroy(ist40xx_class); |
| err_read_info: |
| #ifdef IST40XX_INTERNAL_BIN |
| err_irq: |
| #endif |
| ist40xx_disable_irq(data); |
| free_irq(client->irq, data); |
| err_init_drv: |
| input_free_device(input_dev); |
| data->status.event_mode = false; |
| ist40xx_power_off(data); |
| #if (defined(CONFIG_HAS_EARLYSUSPEND) && !defined(USE_OPEN_CLOSE)) |
| unregister_early_suspend(&data->early_suspend); |
| #endif |
| err_null_data: |
| err_alloc_dt: |
| err_pinctrl: |
| if (tdata) |
| kfree(tdata); |
| if (data->dt_data) { |
| ist40xx_free_gpio(data); |
| } |
| error_alloc_tdata: |
| if (data->dt_data) { |
| input_err(true, &client->dev, "Error, ist40xx mem free\n"); |
| kfree(data->dt_data); |
| } |
| err_alloc_dev: |
| #ifdef CONFIG_TOUCHSCREEN_DUMP_MODE |
| p_ghost_check = NULL; |
| #endif |
| kfree(data); |
| input_err(true, &client->dev, "Error, ist40xx init driver\n"); |
| return -ENODEV; |
| } |
| |
| static int ist40xx_remove(struct i2c_client *client) |
| { |
| struct ist40xx_data *data = i2c_get_clientdata(client); |
| |
| #if (defined(CONFIG_HAS_EARLYSUSPEND) && !defined(USE_OPEN_CLOSE)) |
| unregister_early_suspend(&data->early_suspend); |
| #endif |
| |
| ist40xx_disable_irq(data); |
| free_irq(client->irq, data); |
| ist40xx_power_off(data); |
| #ifdef SEC_FACTORY_MODE |
| sec_touch_sysfs_remove(data); |
| sec_cmd_exit(&data->sec, SEC_CLASS_DEVT_TSP); |
| #endif |
| |
| #ifdef CONFIG_OF |
| if (data->dt_data) { |
| ist40xx_free_gpio(data); |
| kfree(data->dt_data); |
| } |
| #endif |
| |
| input_unregister_device(data->input_dev); |
| input_free_device(data->input_dev); |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static void ist40xx_shutdown(struct i2c_client *client) |
| { |
| struct ist40xx_data *data = i2c_get_clientdata(client); |
| |
| del_timer(&data->event_timer); |
| cancel_delayed_work_sync(&data->work_reset_check); |
| #ifdef IST40XX_NOISE_MODE |
| cancel_delayed_work_sync(&data->work_noise_protect); |
| #else |
| cancel_delayed_work_sync(&data->work_force_release); |
| #endif |
| cancel_delayed_work_sync(&data->work_debug_algorithm); |
| mutex_lock(&data->lock); |
| ist40xx_disable_irq(data); |
| ist40xx_power_off(data); |
| clear_input_data(data); |
| mutex_unlock(&data->lock); |
| } |
| |
| static struct i2c_device_id ist40xx_idtable[] = { |
| {IST40XX_DEV_NAME, 0}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, ist40xx_idtable); |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id ist40xx_match_table[] = { |
| {.compatible = "imagis,ist40xx-ts",}, |
| {}, |
| }; |
| #else |
| #define ist40xx_match_table NULL |
| #endif |
| |
| #if (!defined(CONFIG_HAS_EARLYSUSPEND) && !defined(USE_OPEN_CLOSE)) |
| static const struct dev_pm_ops ist40xx_pm_ops = { |
| .suspend = ist40xx_suspend, |
| .resume = ist40xx_resume, |
| }; |
| #endif |
| |
| static struct i2c_driver ist40xx_i2c_driver = { |
| .id_table = ist40xx_idtable, |
| .probe = ist40xx_probe, |
| .remove = ist40xx_remove, |
| .shutdown = ist40xx_shutdown, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = IST40XX_DEV_NAME, |
| .of_match_table = ist40xx_match_table, |
| #if (!defined(CONFIG_HAS_EARLYSUSPEND) && !defined(USE_OPEN_CLOSE)) |
| .pm = &ist40xx_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init ist40xx_init(void) |
| { |
| tsp_info("%s()\n", __func__); |
| |
| #ifdef CONFIG_BATTERY_SAMSUNG |
| if (lpcharge == 1) { |
| tsp_info("%s : Do not load driver due to : lpm %d\n", |
| __func__, lpcharge); |
| return -ENODEV; |
| } |
| #endif |
| |
| return i2c_add_driver(&ist40xx_i2c_driver); |
| } |
| |
| static void __exit ist40xx_exit(void) |
| { |
| tsp_info("%s()\n", __func__); |
| i2c_del_driver(&ist40xx_i2c_driver); |
| } |
| |
| module_init(ist40xx_init); |
| module_exit(ist40xx_exit); |
| |
| MODULE_DESCRIPTION("Imagis IST40XX touch driver"); |
| MODULE_LICENSE("GPL"); |