| /* |
| * Elan Microelectronics touch panels with I2C interface |
| * |
| * Copyright (C) 2014 Elan Microelectronics Corporation. |
| * Scott Liu <scott.liu@emc.com.tw> |
| * |
| * This code is partly based on hid-multitouch.c: |
| * |
| * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr> |
| * Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> |
| * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France |
| * |
| * |
| * This code is partly based on i2c-hid.c: |
| * |
| * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> |
| * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France |
| * Copyright (c) 2012 Red Hat, Inc |
| */ |
| |
| /* |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/async.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/uaccess.h> |
| #include <linux/buffer_head.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| #include <linux/input/mt.h> |
| #include <linux/acpi.h> |
| #include <linux/of.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/regulator/consumer.h> |
| #include <asm/unaligned.h> |
| |
| /* Device, Driver information */ |
| #define DEVICE_NAME "elants_i2c" |
| #define DRV_VERSION "1.0.9" |
| |
| /* Convert from rows or columns into resolution */ |
| #define ELAN_TS_RESOLUTION(n, m) (((n) - 1) * (m)) |
| |
| /* FW header data */ |
| #define HEADER_SIZE 4 |
| #define FW_HDR_TYPE 0 |
| #define FW_HDR_COUNT 1 |
| #define FW_HDR_LENGTH 2 |
| |
| /* Buffer mode Queue Header information */ |
| #define QUEUE_HEADER_SINGLE 0x62 |
| #define QUEUE_HEADER_NORMAL 0X63 |
| #define QUEUE_HEADER_WAIT 0x64 |
| |
| /* Command header definition */ |
| #define CMD_HEADER_WRITE 0x54 |
| #define CMD_HEADER_READ 0x53 |
| #define CMD_HEADER_6B_READ 0x5B |
| #define CMD_HEADER_RESP 0x52 |
| #define CMD_HEADER_6B_RESP 0x9B |
| #define CMD_HEADER_HELLO 0x55 |
| #define CMD_HEADER_REK 0x66 |
| |
| /* FW position data */ |
| #define PACKET_SIZE 55 |
| #define MAX_CONTACT_NUM 10 |
| #define FW_POS_HEADER 0 |
| #define FW_POS_STATE 1 |
| #define FW_POS_TOTAL 2 |
| #define FW_POS_XY 3 |
| #define FW_POS_CHECKSUM 34 |
| #define FW_POS_WIDTH 35 |
| #define FW_POS_PRESSURE 45 |
| |
| #define HEADER_REPORT_10_FINGER 0x62 |
| |
| /* Header (4 bytes) plus 3 fill 10-finger packets */ |
| #define MAX_PACKET_SIZE 169 |
| |
| #define BOOT_TIME_DELAY_MS 50 |
| |
| /* FW read command, 0x53 0x?? 0x0, 0x01 */ |
| #define E_ELAN_INFO_FW_VER 0x00 |
| #define E_ELAN_INFO_BC_VER 0x10 |
| #define E_ELAN_INFO_TEST_VER 0xE0 |
| #define E_ELAN_INFO_FW_ID 0xF0 |
| #define E_INFO_OSR 0xD6 |
| #define E_INFO_PHY_SCAN 0xD7 |
| #define E_INFO_PHY_DRIVER 0xD8 |
| |
| #define MAX_RETRIES 3 |
| #define MAX_FW_UPDATE_RETRIES 30 |
| |
| #define ELAN_FW_PAGESIZE 132 |
| |
| /* calibration timeout definition */ |
| #define ELAN_CALI_TIMEOUT_MSEC 12000 |
| |
| #define ELAN_POWERON_DELAY_USEC 500 |
| #define ELAN_RESET_DELAY_MSEC 20 |
| |
| enum elants_state { |
| ELAN_STATE_NORMAL, |
| ELAN_WAIT_QUEUE_HEADER, |
| ELAN_WAIT_RECALIBRATION, |
| }; |
| |
| enum elants_iap_mode { |
| ELAN_IAP_OPERATIONAL, |
| ELAN_IAP_RECOVERY, |
| }; |
| |
| /* struct elants_data - represents state of Elan touchscreen device */ |
| struct elants_data { |
| struct i2c_client *client; |
| struct input_dev *input; |
| |
| struct regulator *vcc33; |
| struct regulator *vccio; |
| struct gpio_desc *reset_gpio; |
| |
| u16 fw_version; |
| u8 test_version; |
| u8 solution_version; |
| u8 bc_version; |
| u8 iap_version; |
| u16 hw_version; |
| unsigned int x_res; /* resolution in units/mm */ |
| unsigned int y_res; |
| unsigned int x_max; |
| unsigned int y_max; |
| |
| enum elants_state state; |
| enum elants_iap_mode iap_mode; |
| |
| /* Guards against concurrent access to the device via sysfs */ |
| struct mutex sysfs_mutex; |
| |
| u8 cmd_resp[HEADER_SIZE]; |
| struct completion cmd_done; |
| |
| u8 buf[MAX_PACKET_SIZE]; |
| |
| bool wake_irq_enabled; |
| bool keep_power_in_suspend; |
| }; |
| |
| static int elants_i2c_send(struct i2c_client *client, |
| const void *data, size_t size) |
| { |
| int ret; |
| |
| ret = i2c_master_send(client, data, size); |
| if (ret == size) |
| return 0; |
| |
| if (ret >= 0) |
| ret = -EIO; |
| |
| dev_err(&client->dev, "%s failed (%*ph): %d\n", |
| __func__, (int)size, data, ret); |
| |
| return ret; |
| } |
| |
| static int elants_i2c_read(struct i2c_client *client, void *data, size_t size) |
| { |
| int ret; |
| |
| ret = i2c_master_recv(client, data, size); |
| if (ret == size) |
| return 0; |
| |
| if (ret >= 0) |
| ret = -EIO; |
| |
| dev_err(&client->dev, "%s failed: %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int elants_i2c_execute_command(struct i2c_client *client, |
| const u8 *cmd, size_t cmd_size, |
| u8 *resp, size_t resp_size) |
| { |
| struct i2c_msg msgs[2]; |
| int ret; |
| u8 expected_response; |
| |
| switch (cmd[0]) { |
| case CMD_HEADER_READ: |
| expected_response = CMD_HEADER_RESP; |
| break; |
| |
| case CMD_HEADER_6B_READ: |
| expected_response = CMD_HEADER_6B_RESP; |
| break; |
| |
| default: |
| dev_err(&client->dev, "%s: invalid command %*ph\n", |
| __func__, (int)cmd_size, cmd); |
| return -EINVAL; |
| } |
| |
| msgs[0].addr = client->addr; |
| msgs[0].flags = client->flags & I2C_M_TEN; |
| msgs[0].len = cmd_size; |
| msgs[0].buf = (u8 *)cmd; |
| |
| msgs[1].addr = client->addr; |
| msgs[1].flags = client->flags & I2C_M_TEN; |
| msgs[1].flags |= I2C_M_RD; |
| msgs[1].len = resp_size; |
| msgs[1].buf = resp; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret < 0) |
| return ret; |
| |
| if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int elants_i2c_calibrate(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int ret, error; |
| static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A }; |
| static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 }; |
| static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 }; |
| |
| disable_irq(client->irq); |
| |
| ts->state = ELAN_WAIT_RECALIBRATION; |
| reinit_completion(&ts->cmd_done); |
| |
| elants_i2c_send(client, w_flashkey, sizeof(w_flashkey)); |
| elants_i2c_send(client, rek, sizeof(rek)); |
| |
| enable_irq(client->irq); |
| |
| ret = wait_for_completion_interruptible_timeout(&ts->cmd_done, |
| msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC)); |
| |
| ts->state = ELAN_STATE_NORMAL; |
| |
| if (ret <= 0) { |
| error = ret < 0 ? ret : -ETIMEDOUT; |
| dev_err(&client->dev, |
| "error while waiting for calibration to complete: %d\n", |
| error); |
| return error; |
| } |
| |
| if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) { |
| dev_err(&client->dev, |
| "unexpected calibration response: %*ph\n", |
| (int)sizeof(ts->cmd_resp), ts->cmd_resp); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int elants_i2c_sw_reset(struct i2c_client *client) |
| { |
| const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 }; |
| int error; |
| |
| error = elants_i2c_send(client, soft_rst_cmd, |
| sizeof(soft_rst_cmd)); |
| if (error) { |
| dev_err(&client->dev, "software reset failed: %d\n", error); |
| return error; |
| } |
| |
| /* |
| * We should wait at least 10 msec (but no more than 40) before |
| * sending fastboot or IAP command to the device. |
| */ |
| msleep(30); |
| |
| return 0; |
| } |
| |
| static u16 elants_i2c_parse_version(u8 *buf) |
| { |
| return get_unaligned_be32(buf) >> 4; |
| } |
| |
| static int elants_i2c_query_fw_id(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int error, retry_cnt; |
| const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 }; |
| u8 resp[HEADER_SIZE]; |
| |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_execute_command(client, cmd, sizeof(cmd), |
| resp, sizeof(resp)); |
| if (!error) { |
| ts->hw_version = elants_i2c_parse_version(resp); |
| if (ts->hw_version != 0xffff) |
| return 0; |
| } |
| |
| dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n", |
| error, (int)sizeof(resp), resp); |
| } |
| |
| dev_err(&client->dev, |
| "Failed to read fw id or fw id is invalid\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int elants_i2c_query_fw_version(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int error, retry_cnt; |
| const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 }; |
| u8 resp[HEADER_SIZE]; |
| |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_execute_command(client, cmd, sizeof(cmd), |
| resp, sizeof(resp)); |
| if (!error) { |
| ts->fw_version = elants_i2c_parse_version(resp); |
| if (ts->fw_version != 0x0000 && |
| ts->fw_version != 0xffff) |
| return 0; |
| } |
| |
| dev_dbg(&client->dev, "read fw version error=%d, buf=%*phC\n", |
| error, (int)sizeof(resp), resp); |
| } |
| |
| dev_err(&client->dev, |
| "Failed to read fw version or fw version is invalid\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int elants_i2c_query_test_version(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int error, retry_cnt; |
| u16 version; |
| const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 }; |
| u8 resp[HEADER_SIZE]; |
| |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_execute_command(client, cmd, sizeof(cmd), |
| resp, sizeof(resp)); |
| if (!error) { |
| version = elants_i2c_parse_version(resp); |
| ts->test_version = version >> 8; |
| ts->solution_version = version & 0xff; |
| |
| return 0; |
| } |
| |
| dev_dbg(&client->dev, |
| "read test version error rc=%d, buf=%*phC\n", |
| error, (int)sizeof(resp), resp); |
| } |
| |
| dev_err(&client->dev, "Failed to read test version\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int elants_i2c_query_bc_version(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 }; |
| u8 resp[HEADER_SIZE]; |
| u16 version; |
| int error; |
| |
| error = elants_i2c_execute_command(client, cmd, sizeof(cmd), |
| resp, sizeof(resp)); |
| if (error) { |
| dev_err(&client->dev, |
| "read BC version error=%d, buf=%*phC\n", |
| error, (int)sizeof(resp), resp); |
| return error; |
| } |
| |
| version = elants_i2c_parse_version(resp); |
| ts->bc_version = version >> 8; |
| ts->iap_version = version & 0xff; |
| |
| return 0; |
| } |
| |
| static int elants_i2c_query_ts_info(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int error; |
| u8 resp[17]; |
| u16 phy_x, phy_y, rows, cols, osr; |
| const u8 get_resolution_cmd[] = { |
| CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| const u8 get_osr_cmd[] = { |
| CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01 |
| }; |
| const u8 get_physical_scan_cmd[] = { |
| CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01 |
| }; |
| const u8 get_physical_drive_cmd[] = { |
| CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01 |
| }; |
| |
| /* Get trace number */ |
| error = elants_i2c_execute_command(client, |
| get_resolution_cmd, |
| sizeof(get_resolution_cmd), |
| resp, sizeof(resp)); |
| if (error) { |
| dev_err(&client->dev, "get resolution command failed: %d\n", |
| error); |
| return error; |
| } |
| |
| rows = resp[2] + resp[6] + resp[10]; |
| cols = resp[3] + resp[7] + resp[11]; |
| |
| /* Process mm_to_pixel information */ |
| error = elants_i2c_execute_command(client, |
| get_osr_cmd, sizeof(get_osr_cmd), |
| resp, sizeof(resp)); |
| if (error) { |
| dev_err(&client->dev, "get osr command failed: %d\n", |
| error); |
| return error; |
| } |
| |
| osr = resp[3]; |
| |
| error = elants_i2c_execute_command(client, |
| get_physical_scan_cmd, |
| sizeof(get_physical_scan_cmd), |
| resp, sizeof(resp)); |
| if (error) { |
| dev_err(&client->dev, "get physical scan command failed: %d\n", |
| error); |
| return error; |
| } |
| |
| phy_x = get_unaligned_be16(&resp[2]); |
| |
| error = elants_i2c_execute_command(client, |
| get_physical_drive_cmd, |
| sizeof(get_physical_drive_cmd), |
| resp, sizeof(resp)); |
| if (error) { |
| dev_err(&client->dev, "get physical drive command failed: %d\n", |
| error); |
| return error; |
| } |
| |
| phy_y = get_unaligned_be16(&resp[2]); |
| |
| dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y); |
| |
| if (rows == 0 || cols == 0 || osr == 0) { |
| dev_warn(&client->dev, |
| "invalid trace number data: %d, %d, %d\n", |
| rows, cols, osr); |
| } else { |
| /* translate trace number to TS resolution */ |
| ts->x_max = ELAN_TS_RESOLUTION(rows, osr); |
| ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x); |
| ts->y_max = ELAN_TS_RESOLUTION(cols, osr); |
| ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y); |
| } |
| |
| return 0; |
| } |
| |
| static int elants_i2c_fastboot(struct i2c_client *client) |
| { |
| const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E }; |
| int error; |
| |
| error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd)); |
| if (error) { |
| dev_err(&client->dev, "boot failed: %d\n", error); |
| return error; |
| } |
| |
| dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr); |
| return 0; |
| } |
| |
| static int elants_i2c_initialize(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| int error, retry_cnt; |
| const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 }; |
| const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 }; |
| u8 buf[HEADER_SIZE]; |
| |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_sw_reset(client); |
| if (error) { |
| /* Continue initializing if it's the last try */ |
| if (retry_cnt < MAX_RETRIES - 1) |
| continue; |
| } |
| |
| error = elants_i2c_fastboot(client); |
| if (error) { |
| /* Continue initializing if it's the last try */ |
| if (retry_cnt < MAX_RETRIES - 1) |
| continue; |
| } |
| |
| /* Wait for Hello packet */ |
| msleep(BOOT_TIME_DELAY_MS); |
| |
| error = elants_i2c_read(client, buf, sizeof(buf)); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to read 'hello' packet: %d\n", error); |
| } else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) { |
| ts->iap_mode = ELAN_IAP_OPERATIONAL; |
| break; |
| } else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) { |
| /* |
| * Setting error code will mark device |
| * in recovery mode below. |
| */ |
| error = -EIO; |
| break; |
| } else { |
| error = -EINVAL; |
| dev_err(&client->dev, |
| "invalid 'hello' packet: %*ph\n", |
| (int)sizeof(buf), buf); |
| } |
| } |
| |
| if (!error) |
| error = elants_i2c_query_fw_id(ts); |
| if (!error) |
| error = elants_i2c_query_fw_version(ts); |
| |
| if (error) { |
| ts->iap_mode = ELAN_IAP_RECOVERY; |
| } else { |
| elants_i2c_query_test_version(ts); |
| elants_i2c_query_bc_version(ts); |
| elants_i2c_query_ts_info(ts); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Firmware update interface. |
| */ |
| |
| static int elants_i2c_fw_write_page(struct i2c_client *client, |
| const void *page) |
| { |
| const u8 ack_ok[] = { 0xaa, 0xaa }; |
| u8 buf[2]; |
| int retry; |
| int error; |
| |
| for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) { |
| error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE); |
| if (error) { |
| dev_err(&client->dev, |
| "IAP Write Page failed: %d\n", error); |
| continue; |
| } |
| |
| error = elants_i2c_read(client, buf, 2); |
| if (error) { |
| dev_err(&client->dev, |
| "IAP Ack read failed: %d\n", error); |
| return error; |
| } |
| |
| if (!memcmp(buf, ack_ok, sizeof(ack_ok))) |
| return 0; |
| |
| error = -EIO; |
| dev_err(&client->dev, |
| "IAP Get Ack Error [%02x:%02x]\n", |
| buf[0], buf[1]); |
| } |
| |
| return error; |
| } |
| |
| static int elants_i2c_do_update_firmware(struct i2c_client *client, |
| const struct firmware *fw, |
| bool force) |
| { |
| const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 }; |
| const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 }; |
| const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc }; |
| const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01}; |
| u8 buf[HEADER_SIZE]; |
| u16 send_id; |
| int page, n_fw_pages; |
| int error; |
| |
| /* Recovery mode detection! */ |
| if (force) { |
| dev_dbg(&client->dev, "Recovery mode procedure\n"); |
| error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2)); |
| } else { |
| /* Start IAP Procedure */ |
| dev_dbg(&client->dev, "Normal IAP procedure\n"); |
| /* Close idle mode */ |
| error = elants_i2c_send(client, close_idle, sizeof(close_idle)); |
| if (error) |
| dev_err(&client->dev, "Failed close idle: %d\n", error); |
| msleep(60); |
| elants_i2c_sw_reset(client); |
| msleep(20); |
| error = elants_i2c_send(client, enter_iap, sizeof(enter_iap)); |
| } |
| |
| if (error) { |
| dev_err(&client->dev, "failed to enter IAP mode: %d\n", error); |
| return error; |
| } |
| |
| msleep(20); |
| |
| /* check IAP state */ |
| error = elants_i2c_read(client, buf, 4); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to read IAP acknowledgement: %d\n", |
| error); |
| return error; |
| } |
| |
| if (memcmp(buf, iap_ack, sizeof(iap_ack))) { |
| dev_err(&client->dev, |
| "failed to enter IAP: %*ph (expected %*ph)\n", |
| (int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack); |
| return -EIO; |
| } |
| |
| dev_info(&client->dev, "successfully entered IAP mode"); |
| |
| send_id = client->addr; |
| error = elants_i2c_send(client, &send_id, 1); |
| if (error) { |
| dev_err(&client->dev, "sending dummy byte failed: %d\n", |
| error); |
| return error; |
| } |
| |
| /* Clear the last page of Master */ |
| error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE); |
| if (error) { |
| dev_err(&client->dev, "clearing of the last page failed: %d\n", |
| error); |
| return error; |
| } |
| |
| error = elants_i2c_read(client, buf, 2); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to read ACK for clearing the last page: %d\n", |
| error); |
| return error; |
| } |
| |
| n_fw_pages = fw->size / ELAN_FW_PAGESIZE; |
| dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages); |
| |
| for (page = 0; page < n_fw_pages; page++) { |
| error = elants_i2c_fw_write_page(client, |
| fw->data + page * ELAN_FW_PAGESIZE); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to write FW page %d: %d\n", |
| page, error); |
| return error; |
| } |
| } |
| |
| /* Old iap needs to wait 200ms for WDT and rest is for hello packets */ |
| msleep(300); |
| |
| dev_info(&client->dev, "firmware update completed\n"); |
| return 0; |
| } |
| |
| static int elants_i2c_fw_update(struct elants_data *ts) |
| { |
| struct i2c_client *client = ts->client; |
| const struct firmware *fw; |
| char *fw_name; |
| int error; |
| |
| fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version); |
| if (!fw_name) |
| return -ENOMEM; |
| |
| dev_info(&client->dev, "requesting fw name = %s\n", fw_name); |
| error = request_firmware(&fw, fw_name, &client->dev); |
| kfree(fw_name); |
| if (error) { |
| dev_err(&client->dev, "failed to request firmware: %d\n", |
| error); |
| return error; |
| } |
| |
| if (fw->size % ELAN_FW_PAGESIZE) { |
| dev_err(&client->dev, "invalid firmware length: %zu\n", |
| fw->size); |
| error = -EINVAL; |
| goto out; |
| } |
| |
| disable_irq(client->irq); |
| |
| error = elants_i2c_do_update_firmware(client, fw, |
| ts->iap_mode == ELAN_IAP_RECOVERY); |
| if (error) { |
| dev_err(&client->dev, "firmware update failed: %d\n", error); |
| ts->iap_mode = ELAN_IAP_RECOVERY; |
| goto out_enable_irq; |
| } |
| |
| error = elants_i2c_initialize(ts); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to initialize device after firmware update: %d\n", |
| error); |
| ts->iap_mode = ELAN_IAP_RECOVERY; |
| goto out_enable_irq; |
| } |
| |
| ts->iap_mode = ELAN_IAP_OPERATIONAL; |
| |
| out_enable_irq: |
| ts->state = ELAN_STATE_NORMAL; |
| enable_irq(client->irq); |
| msleep(100); |
| |
| if (!error) |
| elants_i2c_calibrate(ts); |
| out: |
| release_firmware(fw); |
| return error; |
| } |
| |
| /* |
| * Event reporting. |
| */ |
| |
| static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf) |
| { |
| struct input_dev *input = ts->input; |
| unsigned int n_fingers; |
| u16 finger_state; |
| int i; |
| |
| n_fingers = buf[FW_POS_STATE + 1] & 0x0f; |
| finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) | |
| buf[FW_POS_STATE]; |
| |
| dev_dbg(&ts->client->dev, |
| "n_fingers: %u, state: %04x\n", n_fingers, finger_state); |
| |
| for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) { |
| if (finger_state & 1) { |
| unsigned int x, y, p, w; |
| u8 *pos; |
| |
| pos = &buf[FW_POS_XY + i * 3]; |
| x = (((u16)pos[0] & 0xf0) << 4) | pos[1]; |
| y = (((u16)pos[0] & 0x0f) << 8) | pos[2]; |
| p = buf[FW_POS_PRESSURE + i]; |
| w = buf[FW_POS_WIDTH + i]; |
| |
| dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n", |
| i, x, y, p, w); |
| |
| input_mt_slot(input, i); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, true); |
| input_event(input, EV_ABS, ABS_MT_POSITION_X, x); |
| input_event(input, EV_ABS, ABS_MT_POSITION_Y, y); |
| input_event(input, EV_ABS, ABS_MT_PRESSURE, p); |
| input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w); |
| |
| n_fingers--; |
| } |
| |
| finger_state >>= 1; |
| } |
| |
| input_mt_sync_frame(input); |
| input_sync(input); |
| } |
| |
| static u8 elants_i2c_calculate_checksum(u8 *buf) |
| { |
| u8 checksum = 0; |
| u8 i; |
| |
| for (i = 0; i < FW_POS_CHECKSUM; i++) |
| checksum += buf[i]; |
| |
| return checksum; |
| } |
| |
| static void elants_i2c_event(struct elants_data *ts, u8 *buf) |
| { |
| u8 checksum = elants_i2c_calculate_checksum(buf); |
| |
| if (unlikely(buf[FW_POS_CHECKSUM] != checksum)) |
| dev_warn(&ts->client->dev, |
| "%s: invalid checksum for packet %02x: %02x vs. %02x\n", |
| __func__, buf[FW_POS_HEADER], |
| checksum, buf[FW_POS_CHECKSUM]); |
| else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER)) |
| dev_warn(&ts->client->dev, |
| "%s: unknown packet type: %02x\n", |
| __func__, buf[FW_POS_HEADER]); |
| else |
| elants_i2c_mt_event(ts, buf); |
| } |
| |
| static irqreturn_t elants_i2c_irq(int irq, void *_dev) |
| { |
| const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 }; |
| struct elants_data *ts = _dev; |
| struct i2c_client *client = ts->client; |
| int report_count, report_len; |
| int i; |
| int len; |
| |
| len = i2c_master_recv(client, ts->buf, sizeof(ts->buf)); |
| if (len < 0) { |
| dev_err(&client->dev, "%s: failed to read data: %d\n", |
| __func__, len); |
| goto out; |
| } |
| |
| dev_dbg(&client->dev, "%s: packet %*ph\n", |
| __func__, HEADER_SIZE, ts->buf); |
| |
| switch (ts->state) { |
| case ELAN_WAIT_RECALIBRATION: |
| if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) { |
| memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp)); |
| complete(&ts->cmd_done); |
| ts->state = ELAN_STATE_NORMAL; |
| } |
| break; |
| |
| case ELAN_WAIT_QUEUE_HEADER: |
| if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL) |
| break; |
| |
| ts->state = ELAN_STATE_NORMAL; |
| /* fall through */ |
| |
| case ELAN_STATE_NORMAL: |
| |
| switch (ts->buf[FW_HDR_TYPE]) { |
| case CMD_HEADER_HELLO: |
| case CMD_HEADER_RESP: |
| case CMD_HEADER_REK: |
| break; |
| |
| case QUEUE_HEADER_WAIT: |
| if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) { |
| dev_err(&client->dev, |
| "invalid wait packet %*ph\n", |
| HEADER_SIZE, ts->buf); |
| } else { |
| ts->state = ELAN_WAIT_QUEUE_HEADER; |
| udelay(30); |
| } |
| break; |
| |
| case QUEUE_HEADER_SINGLE: |
| elants_i2c_event(ts, &ts->buf[HEADER_SIZE]); |
| break; |
| |
| case QUEUE_HEADER_NORMAL: |
| report_count = ts->buf[FW_HDR_COUNT]; |
| if (report_count == 0 || report_count > 3) { |
| dev_err(&client->dev, |
| "bad report count: %*ph\n", |
| HEADER_SIZE, ts->buf); |
| break; |
| } |
| |
| report_len = ts->buf[FW_HDR_LENGTH] / report_count; |
| if (report_len != PACKET_SIZE) { |
| dev_err(&client->dev, |
| "mismatching report length: %*ph\n", |
| HEADER_SIZE, ts->buf); |
| break; |
| } |
| |
| for (i = 0; i < report_count; i++) { |
| u8 *buf = ts->buf + HEADER_SIZE + |
| i * PACKET_SIZE; |
| elants_i2c_event(ts, buf); |
| } |
| break; |
| |
| default: |
| dev_err(&client->dev, "unknown packet %*ph\n", |
| HEADER_SIZE, ts->buf); |
| break; |
| } |
| break; |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * sysfs interface |
| */ |
| static ssize_t calibrate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| int error; |
| |
| error = mutex_lock_interruptible(&ts->sysfs_mutex); |
| if (error) |
| return error; |
| |
| error = elants_i2c_calibrate(ts); |
| |
| mutex_unlock(&ts->sysfs_mutex); |
| return error ?: count; |
| } |
| |
| static ssize_t write_update_fw(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| int error; |
| |
| error = mutex_lock_interruptible(&ts->sysfs_mutex); |
| if (error) |
| return error; |
| |
| error = elants_i2c_fw_update(ts); |
| dev_dbg(dev, "firmware update result: %d\n", error); |
| |
| mutex_unlock(&ts->sysfs_mutex); |
| return error ?: count; |
| } |
| |
| static ssize_t show_iap_mode(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| |
| return sprintf(buf, "%s\n", |
| ts->iap_mode == ELAN_IAP_OPERATIONAL ? |
| "Normal" : "Recovery"); |
| } |
| |
| static DEVICE_ATTR(calibrate, S_IWUSR, NULL, calibrate_store); |
| static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL); |
| static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw); |
| |
| struct elants_version_attribute { |
| struct device_attribute dattr; |
| size_t field_offset; |
| size_t field_size; |
| }; |
| |
| #define __ELANTS_FIELD_SIZE(_field) \ |
| sizeof(((struct elants_data *)NULL)->_field) |
| #define __ELANTS_VERIFY_SIZE(_field) \ |
| (BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) + \ |
| __ELANTS_FIELD_SIZE(_field)) |
| #define ELANTS_VERSION_ATTR(_field) \ |
| struct elants_version_attribute elants_ver_attr_##_field = { \ |
| .dattr = __ATTR(_field, S_IRUGO, \ |
| elants_version_attribute_show, NULL), \ |
| .field_offset = offsetof(struct elants_data, _field), \ |
| .field_size = __ELANTS_VERIFY_SIZE(_field), \ |
| } |
| |
| static ssize_t elants_version_attribute_show(struct device *dev, |
| struct device_attribute *dattr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| struct elants_version_attribute *attr = |
| container_of(dattr, struct elants_version_attribute, dattr); |
| u8 *field = (u8 *)((char *)ts + attr->field_offset); |
| unsigned int fmt_size; |
| unsigned int val; |
| |
| if (attr->field_size == 1) { |
| val = *field; |
| fmt_size = 2; /* 2 HEX digits */ |
| } else { |
| val = *(u16 *)field; |
| fmt_size = 4; /* 4 HEX digits */ |
| } |
| |
| return sprintf(buf, "%0*x\n", fmt_size, val); |
| } |
| |
| static ELANTS_VERSION_ATTR(fw_version); |
| static ELANTS_VERSION_ATTR(hw_version); |
| static ELANTS_VERSION_ATTR(test_version); |
| static ELANTS_VERSION_ATTR(solution_version); |
| static ELANTS_VERSION_ATTR(bc_version); |
| static ELANTS_VERSION_ATTR(iap_version); |
| |
| static struct attribute *elants_attributes[] = { |
| &dev_attr_calibrate.attr, |
| &dev_attr_update_fw.attr, |
| &dev_attr_iap_mode.attr, |
| |
| &elants_ver_attr_fw_version.dattr.attr, |
| &elants_ver_attr_hw_version.dattr.attr, |
| &elants_ver_attr_test_version.dattr.attr, |
| &elants_ver_attr_solution_version.dattr.attr, |
| &elants_ver_attr_bc_version.dattr.attr, |
| &elants_ver_attr_iap_version.dattr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group elants_attribute_group = { |
| .attrs = elants_attributes, |
| }; |
| |
| static void elants_i2c_remove_sysfs_group(void *_data) |
| { |
| struct elants_data *ts = _data; |
| |
| sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group); |
| } |
| |
| static int elants_i2c_power_on(struct elants_data *ts) |
| { |
| int error; |
| |
| /* |
| * If we do not have reset gpio assume platform firmware |
| * controls regulators and does power them on for us. |
| */ |
| if (IS_ERR_OR_NULL(ts->reset_gpio)) |
| return 0; |
| |
| gpiod_set_value_cansleep(ts->reset_gpio, 1); |
| |
| error = regulator_enable(ts->vcc33); |
| if (error) { |
| dev_err(&ts->client->dev, |
| "failed to enable vcc33 regulator: %d\n", |
| error); |
| goto release_reset_gpio; |
| } |
| |
| error = regulator_enable(ts->vccio); |
| if (error) { |
| dev_err(&ts->client->dev, |
| "failed to enable vccio regulator: %d\n", |
| error); |
| regulator_disable(ts->vcc33); |
| goto release_reset_gpio; |
| } |
| |
| /* |
| * We need to wait a bit after powering on controller before |
| * we are allowed to release reset GPIO. |
| */ |
| udelay(ELAN_POWERON_DELAY_USEC); |
| |
| release_reset_gpio: |
| gpiod_set_value_cansleep(ts->reset_gpio, 0); |
| if (error) |
| return error; |
| |
| msleep(ELAN_RESET_DELAY_MSEC); |
| |
| return 0; |
| } |
| |
| static void elants_i2c_power_off(void *_data) |
| { |
| struct elants_data *ts = _data; |
| |
| if (!IS_ERR_OR_NULL(ts->reset_gpio)) { |
| /* |
| * Activate reset gpio to prevent leakage through the |
| * pin once we shut off power to the controller. |
| */ |
| gpiod_set_value_cansleep(ts->reset_gpio, 1); |
| regulator_disable(ts->vccio); |
| regulator_disable(ts->vcc33); |
| } |
| } |
| |
| static int elants_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| union i2c_smbus_data dummy; |
| struct elants_data *ts; |
| unsigned long irqflags; |
| int error; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, |
| "%s: i2c check functionality error\n", DEVICE_NAME); |
| return -ENXIO; |
| } |
| |
| ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL); |
| if (!ts) |
| return -ENOMEM; |
| |
| mutex_init(&ts->sysfs_mutex); |
| init_completion(&ts->cmd_done); |
| |
| ts->client = client; |
| i2c_set_clientdata(client, ts); |
| |
| ts->vcc33 = devm_regulator_get(&client->dev, "vcc33"); |
| if (IS_ERR(ts->vcc33)) { |
| error = PTR_ERR(ts->vcc33); |
| if (error != -EPROBE_DEFER) |
| dev_err(&client->dev, |
| "Failed to get 'vcc33' regulator: %d\n", |
| error); |
| return error; |
| } |
| |
| ts->vccio = devm_regulator_get(&client->dev, "vccio"); |
| if (IS_ERR(ts->vccio)) { |
| error = PTR_ERR(ts->vccio); |
| if (error != -EPROBE_DEFER) |
| dev_err(&client->dev, |
| "Failed to get 'vccio' regulator: %d\n", |
| error); |
| return error; |
| } |
| |
| ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ts->reset_gpio)) { |
| error = PTR_ERR(ts->reset_gpio); |
| |
| if (error == -EPROBE_DEFER) |
| return error; |
| |
| if (error != -ENOENT && error != -ENOSYS) { |
| dev_err(&client->dev, |
| "failed to get reset gpio: %d\n", |
| error); |
| return error; |
| } |
| |
| ts->keep_power_in_suspend = true; |
| } |
| |
| error = elants_i2c_power_on(ts); |
| if (error) |
| return error; |
| |
| error = devm_add_action(&client->dev, elants_i2c_power_off, ts); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to install power off action: %d\n", error); |
| elants_i2c_power_off(ts); |
| return error; |
| } |
| |
| /* Make sure there is something at this address */ |
| if (i2c_smbus_xfer(client->adapter, client->addr, 0, |
| I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { |
| dev_err(&client->dev, "nothing at this address\n"); |
| return -ENXIO; |
| } |
| |
| error = elants_i2c_initialize(ts); |
| if (error) { |
| dev_err(&client->dev, "failed to initialize: %d\n", error); |
| return error; |
| } |
| |
| ts->input = devm_input_allocate_device(&client->dev); |
| if (!ts->input) { |
| dev_err(&client->dev, "Failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| ts->input->name = "Elan Touchscreen"; |
| ts->input->id.bustype = BUS_I2C; |
| |
| __set_bit(BTN_TOUCH, ts->input->keybit); |
| __set_bit(EV_ABS, ts->input->evbit); |
| __set_bit(EV_KEY, ts->input->evbit); |
| |
| /* Single touch input params setup */ |
| input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0); |
| input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0); |
| input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0); |
| input_abs_set_res(ts->input, ABS_X, ts->x_res); |
| input_abs_set_res(ts->input, ABS_Y, ts->y_res); |
| |
| /* Multitouch input params setup */ |
| error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM, |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to initialize MT slots: %d\n", error); |
| return error; |
| } |
| |
| input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); |
| input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); |
| input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); |
| |
| input_set_drvdata(ts->input, ts); |
| |
| error = input_register_device(ts->input); |
| if (error) { |
| dev_err(&client->dev, |
| "unable to register input device: %d\n", error); |
| return error; |
| } |
| |
| /* |
| * Systems using device tree should set up interrupt via DTS, |
| * the rest will use the default falling edge interrupts. |
| */ |
| irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING; |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, elants_i2c_irq, |
| irqflags | IRQF_ONESHOT, |
| client->name, ts); |
| if (error) { |
| dev_err(&client->dev, "Failed to register interrupt\n"); |
| return error; |
| } |
| |
| /* |
| * Systems using device tree should set up wakeup via DTS, |
| * the rest will configure device as wakeup source by default. |
| */ |
| if (!client->dev.of_node) |
| device_init_wakeup(&client->dev, true); |
| |
| error = sysfs_create_group(&client->dev.kobj, &elants_attribute_group); |
| if (error) { |
| dev_err(&client->dev, "failed to create sysfs attributes: %d\n", |
| error); |
| return error; |
| } |
| |
| error = devm_add_action(&client->dev, |
| elants_i2c_remove_sysfs_group, ts); |
| if (error) { |
| elants_i2c_remove_sysfs_group(ts); |
| dev_err(&client->dev, |
| "Failed to add sysfs cleanup action: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused elants_i2c_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 }; |
| int retry_cnt; |
| int error; |
| |
| /* Command not support in IAP recovery mode */ |
| if (ts->iap_mode != ELAN_IAP_OPERATIONAL) |
| return -EBUSY; |
| |
| disable_irq(client->irq); |
| |
| if (device_may_wakeup(dev)) { |
| /* |
| * The device will automatically enter idle mode |
| * that has reduced power consumption. |
| */ |
| ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); |
| } else if (ts->keep_power_in_suspend) { |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_send(client, set_sleep_cmd, |
| sizeof(set_sleep_cmd)); |
| if (!error) |
| break; |
| |
| dev_err(&client->dev, |
| "suspend command failed: %d\n", error); |
| } |
| } else { |
| elants_i2c_power_off(ts); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused elants_i2c_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct elants_data *ts = i2c_get_clientdata(client); |
| const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 }; |
| int retry_cnt; |
| int error; |
| |
| if (device_may_wakeup(dev)) { |
| if (ts->wake_irq_enabled) |
| disable_irq_wake(client->irq); |
| elants_i2c_sw_reset(client); |
| } else if (ts->keep_power_in_suspend) { |
| for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { |
| error = elants_i2c_send(client, set_active_cmd, |
| sizeof(set_active_cmd)); |
| if (!error) |
| break; |
| |
| dev_err(&client->dev, |
| "resume command failed: %d\n", error); |
| } |
| } else { |
| elants_i2c_power_on(ts); |
| elants_i2c_initialize(ts); |
| } |
| |
| ts->state = ELAN_STATE_NORMAL; |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops, |
| elants_i2c_suspend, elants_i2c_resume); |
| |
| static const struct i2c_device_id elants_i2c_id[] = { |
| { DEVICE_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, elants_i2c_id); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id elants_acpi_id[] = { |
| { "ELAN0001", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, elants_acpi_id); |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id elants_of_match[] = { |
| { .compatible = "elan,ekth3500" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, elants_of_match); |
| #endif |
| |
| static struct i2c_driver elants_i2c_driver = { |
| .probe = elants_i2c_probe, |
| .id_table = elants_i2c_id, |
| .driver = { |
| .name = DEVICE_NAME, |
| .pm = &elants_i2c_pm_ops, |
| .acpi_match_table = ACPI_PTR(elants_acpi_id), |
| .of_match_table = of_match_ptr(elants_of_match), |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| }; |
| module_i2c_driver(elants_i2c_driver); |
| |
| MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>"); |
| MODULE_DESCRIPTION("Elan I2c Touchscreen driver"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_LICENSE("GPL"); |