| /* |
| * Touchscreen driver for Marvell 88PM860x |
| * |
| * Copyright (C) 2009 Marvell International Ltd. |
| * Haojian Zhuang <haojian.zhuang@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/mfd/88pm860x.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| |
| #define MEAS_LEN (8) |
| #define ACCURATE_BIT (12) |
| |
| /* touch register */ |
| #define MEAS_EN3 (0x52) |
| |
| #define MEAS_TSIX_1 (0x8D) |
| #define MEAS_TSIX_2 (0x8E) |
| #define MEAS_TSIY_1 (0x8F) |
| #define MEAS_TSIY_2 (0x90) |
| #define MEAS_TSIZ1_1 (0x91) |
| #define MEAS_TSIZ1_2 (0x92) |
| #define MEAS_TSIZ2_1 (0x93) |
| #define MEAS_TSIZ2_2 (0x94) |
| |
| /* bit definitions of touch */ |
| #define MEAS_PD_EN (1 << 3) |
| #define MEAS_TSIX_EN (1 << 4) |
| #define MEAS_TSIY_EN (1 << 5) |
| #define MEAS_TSIZ1_EN (1 << 6) |
| #define MEAS_TSIZ2_EN (1 << 7) |
| |
| struct pm860x_touch { |
| struct input_dev *idev; |
| struct i2c_client *i2c; |
| struct pm860x_chip *chip; |
| int irq; |
| int res_x; /* resistor of Xplate */ |
| }; |
| |
| static irqreturn_t pm860x_touch_handler(int irq, void *data) |
| { |
| struct pm860x_touch *touch = data; |
| struct pm860x_chip *chip = touch->chip; |
| unsigned char buf[MEAS_LEN]; |
| int x, y, pen_down; |
| int z1, z2, rt = 0; |
| int ret; |
| |
| ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf); |
| if (ret < 0) |
| goto out; |
| |
| pen_down = buf[1] & (1 << 6); |
| x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F); |
| y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F); |
| z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F); |
| z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F); |
| |
| if (pen_down) { |
| if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) { |
| rt = z2 / z1 - 1; |
| rt = (rt * touch->res_x * x) >> ACCURATE_BIT; |
| dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n", |
| z1, z2, rt); |
| } |
| input_report_abs(touch->idev, ABS_X, x); |
| input_report_abs(touch->idev, ABS_Y, y); |
| input_report_abs(touch->idev, ABS_PRESSURE, rt); |
| input_report_key(touch->idev, BTN_TOUCH, 1); |
| dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y); |
| } else { |
| input_report_abs(touch->idev, ABS_PRESSURE, 0); |
| input_report_key(touch->idev, BTN_TOUCH, 0); |
| dev_dbg(chip->dev, "pen release\n"); |
| } |
| input_sync(touch->idev); |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int pm860x_touch_open(struct input_dev *dev) |
| { |
| struct pm860x_touch *touch = input_get_drvdata(dev); |
| int data, ret; |
| |
| data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN |
| | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; |
| ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data); |
| if (ret < 0) |
| goto out; |
| return 0; |
| out: |
| return ret; |
| } |
| |
| static void pm860x_touch_close(struct input_dev *dev) |
| { |
| struct pm860x_touch *touch = input_get_drvdata(dev); |
| int data; |
| |
| data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN |
| | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; |
| pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); |
| } |
| |
| #ifdef CONFIG_OF |
| static int pm860x_touch_dt_init(struct platform_device *pdev, |
| struct pm860x_chip *chip, |
| int *res_x) |
| { |
| struct device_node *np = pdev->dev.parent->of_node; |
| struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ |
| : chip->companion; |
| int data, n, ret; |
| if (!np) |
| return -ENODEV; |
| np = of_get_child_by_name(np, "touch"); |
| if (!np) { |
| dev_err(&pdev->dev, "Can't find touch node\n"); |
| return -EINVAL; |
| } |
| /* set GPADC MISC1 register */ |
| data = 0; |
| if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-prebias", &n)) |
| data |= (n << 1) & PM8607_GPADC_PREBIAS_MASK; |
| if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-slot-cycle", &n)) |
| data |= (n << 3) & PM8607_GPADC_SLOT_CYCLE_MASK; |
| if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-off-scale", &n)) |
| data |= (n << 5) & PM8607_GPADC_OFF_SCALE_MASK; |
| if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-sw-cal", &n)) |
| data |= (n << 7) & PM8607_GPADC_SW_CAL_MASK; |
| if (data) { |
| ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); |
| if (ret < 0) |
| goto err_put_node; |
| } |
| /* set tsi prebias time */ |
| if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) { |
| ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); |
| if (ret < 0) |
| goto err_put_node; |
| } |
| /* set prebias & prechg time of pen detect */ |
| data = 0; |
| if (!of_property_read_u32(np, "marvell,88pm860x-pen-prebias", &n)) |
| data |= n & PM8607_PD_PREBIAS_MASK; |
| if (!of_property_read_u32(np, "marvell,88pm860x-pen-prechg", &n)) |
| data |= n & PM8607_PD_PRECHG_MASK; |
| if (data) { |
| ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); |
| if (ret < 0) |
| goto err_put_node; |
| } |
| of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x); |
| |
| of_node_put(np); |
| |
| return 0; |
| |
| err_put_node: |
| of_node_put(np); |
| |
| return -EINVAL; |
| } |
| #else |
| #define pm860x_touch_dt_init(x, y, z) (-1) |
| #endif |
| |
| static int pm860x_touch_probe(struct platform_device *pdev) |
| { |
| struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| struct pm860x_touch_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct pm860x_touch *touch; |
| struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ |
| : chip->companion; |
| int irq, ret, res_x = 0, data = 0; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "No IRQ resource!\n"); |
| return -EINVAL; |
| } |
| |
| if (pm860x_touch_dt_init(pdev, chip, &res_x)) { |
| if (pdata) { |
| /* set GPADC MISC1 register */ |
| data = 0; |
| data |= (pdata->gpadc_prebias << 1) |
| & PM8607_GPADC_PREBIAS_MASK; |
| data |= (pdata->slot_cycle << 3) |
| & PM8607_GPADC_SLOT_CYCLE_MASK; |
| data |= (pdata->off_scale << 5) |
| & PM8607_GPADC_OFF_SCALE_MASK; |
| data |= (pdata->sw_cal << 7) |
| & PM8607_GPADC_SW_CAL_MASK; |
| if (data) { |
| ret = pm860x_reg_write(i2c, |
| PM8607_GPADC_MISC1, data); |
| if (ret < 0) |
| return -EINVAL; |
| } |
| /* set tsi prebias time */ |
| if (pdata->tsi_prebias) { |
| data = pdata->tsi_prebias; |
| ret = pm860x_reg_write(i2c, |
| PM8607_TSI_PREBIAS, data); |
| if (ret < 0) |
| return -EINVAL; |
| } |
| /* set prebias & prechg time of pen detect */ |
| data = 0; |
| data |= pdata->pen_prebias |
| & PM8607_PD_PREBIAS_MASK; |
| data |= (pdata->pen_prechg << 5) |
| & PM8607_PD_PRECHG_MASK; |
| if (data) { |
| ret = pm860x_reg_write(i2c, |
| PM8607_PD_PREBIAS, data); |
| if (ret < 0) |
| return -EINVAL; |
| } |
| res_x = pdata->res_x; |
| } else { |
| dev_err(&pdev->dev, "failed to get platform data\n"); |
| return -EINVAL; |
| } |
| } |
| /* enable GPADC */ |
| ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, PM8607_GPADC_EN, |
| PM8607_GPADC_EN); |
| if (ret) |
| return ret; |
| |
| touch = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_touch), |
| GFP_KERNEL); |
| if (!touch) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, touch); |
| |
| touch->idev = devm_input_allocate_device(&pdev->dev); |
| if (!touch->idev) { |
| dev_err(&pdev->dev, "Failed to allocate input device!\n"); |
| return -ENOMEM; |
| } |
| |
| touch->idev->name = "88pm860x-touch"; |
| touch->idev->phys = "88pm860x/input0"; |
| touch->idev->id.bustype = BUS_I2C; |
| touch->idev->dev.parent = &pdev->dev; |
| touch->idev->open = pm860x_touch_open; |
| touch->idev->close = pm860x_touch_close; |
| touch->chip = chip; |
| touch->i2c = i2c; |
| touch->irq = irq; |
| touch->res_x = res_x; |
| input_set_drvdata(touch->idev, touch); |
| |
| ret = devm_request_threaded_irq(&pdev->dev, touch->irq, NULL, |
| pm860x_touch_handler, IRQF_ONESHOT, |
| "touch", touch); |
| if (ret < 0) |
| return ret; |
| |
| __set_bit(EV_ABS, touch->idev->evbit); |
| __set_bit(ABS_X, touch->idev->absbit); |
| __set_bit(ABS_Y, touch->idev->absbit); |
| __set_bit(ABS_PRESSURE, touch->idev->absbit); |
| __set_bit(EV_SYN, touch->idev->evbit); |
| __set_bit(EV_KEY, touch->idev->evbit); |
| __set_bit(BTN_TOUCH, touch->idev->keybit); |
| |
| input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0); |
| input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0); |
| input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT, |
| 0, 0); |
| |
| ret = input_register_device(touch->idev); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to register touch!\n"); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, touch); |
| return 0; |
| } |
| |
| static struct platform_driver pm860x_touch_driver = { |
| .driver = { |
| .name = "88pm860x-touch", |
| }, |
| .probe = pm860x_touch_probe, |
| }; |
| module_platform_driver(pm860x_touch_driver); |
| |
| MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x"); |
| MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:88pm860x-touch"); |
| |