| /* |
| * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), |
| * IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #define DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| |
| #include <asm/sections.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/iommu.h> |
| #include <asm/ppc-pci.h> |
| |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| static struct pci_controller *u3_agp, *u3_ht; |
| |
| static int __init fixup_one_level_bus_range(struct device_node *node, int higher) |
| { |
| for (; node != 0;node = node->sibling) { |
| int * bus_range; |
| unsigned int *class_code; |
| int len; |
| |
| /* For PCI<->PCI bridges or CardBus bridges, we go down */ |
| class_code = (unsigned int *) get_property(node, "class-code", NULL); |
| if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && |
| (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) |
| continue; |
| bus_range = (int *) get_property(node, "bus-range", &len); |
| if (bus_range != NULL && len > 2 * sizeof(int)) { |
| if (bus_range[1] > higher) |
| higher = bus_range[1]; |
| } |
| higher = fixup_one_level_bus_range(node->child, higher); |
| } |
| return higher; |
| } |
| |
| /* This routine fixes the "bus-range" property of all bridges in the |
| * system since they tend to have their "last" member wrong on macs |
| * |
| * Note that the bus numbers manipulated here are OF bus numbers, they |
| * are not Linux bus numbers. |
| */ |
| static void __init fixup_bus_range(struct device_node *bridge) |
| { |
| int * bus_range; |
| int len; |
| |
| /* Lookup the "bus-range" property for the hose */ |
| bus_range = (int *) get_property(bridge, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %s\n", |
| bridge->full_name); |
| return; |
| } |
| bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); |
| } |
| |
| |
| #define U3_AGP_CFA0(devfn, off) \ |
| ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ |
| | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ |
| | (((unsigned long)(off)) & 0xFCUL)) |
| |
| #define U3_AGP_CFA1(bus, devfn, off) \ |
| ((((unsigned long)(bus)) << 16) \ |
| |(((unsigned long)(devfn)) << 8) \ |
| |(((unsigned long)(off)) & 0xFCUL) \ |
| |1UL) |
| |
| static unsigned long u3_agp_cfg_access(struct pci_controller* hose, |
| u8 bus, u8 dev_fn, u8 offset) |
| { |
| unsigned int caddr; |
| |
| if (bus == hose->first_busno) { |
| if (dev_fn < (11 << 3)) |
| return 0; |
| caddr = U3_AGP_CFA0(dev_fn, offset); |
| } else |
| caddr = U3_AGP_CFA1(bus, dev_fn, offset); |
| |
| /* Uninorth will return garbage if we don't read back the value ! */ |
| do { |
| out_le32(hose->cfg_addr, caddr); |
| } while (in_le32(hose->cfg_addr) != caddr); |
| |
| offset &= 0x07; |
| return ((unsigned long)hose->cfg_data) + offset; |
| } |
| |
| static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose; |
| unsigned long addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| *val = in_8((u8 *)addr); |
| break; |
| case 2: |
| *val = in_le16((u16 *)addr); |
| break; |
| default: |
| *val = in_le32((u32 *)addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose; |
| unsigned long addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| out_8((u8 *)addr, val); |
| (void) in_8((u8 *)addr); |
| break; |
| case 2: |
| out_le16((u16 *)addr, val); |
| (void) in_le16((u16 *)addr); |
| break; |
| default: |
| out_le32((u32 *)addr, val); |
| (void) in_le32((u32 *)addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops u3_agp_pci_ops = |
| { |
| u3_agp_read_config, |
| u3_agp_write_config |
| }; |
| |
| |
| #define U3_HT_CFA0(devfn, off) \ |
| ((((unsigned long)devfn) << 8) | offset) |
| #define U3_HT_CFA1(bus, devfn, off) \ |
| (U3_HT_CFA0(devfn, off) \ |
| + (((unsigned long)bus) << 16) \ |
| + 0x01000000UL) |
| |
| static unsigned long u3_ht_cfg_access(struct pci_controller* hose, |
| u8 bus, u8 devfn, u8 offset) |
| { |
| if (bus == hose->first_busno) { |
| if (PCI_SLOT(devfn) == 0) |
| return 0; |
| return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); |
| } else |
| return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); |
| } |
| |
| static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose; |
| unsigned long addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| *val = in_8((u8 *)addr); |
| break; |
| case 2: |
| *val = in_le16((u16 *)addr); |
| break; |
| default: |
| *val = in_le32((u32 *)addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose; |
| unsigned long addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| out_8((u8 *)addr, val); |
| (void) in_8((u8 *)addr); |
| break; |
| case 2: |
| out_le16((u16 *)addr, val); |
| (void) in_le16((u16 *)addr); |
| break; |
| default: |
| out_le32((u32 *)addr, val); |
| (void) in_le32((u32 *)addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops u3_ht_pci_ops = |
| { |
| u3_ht_read_config, |
| u3_ht_write_config |
| }; |
| |
| static void __init setup_u3_agp(struct pci_controller* hose) |
| { |
| /* On G5, we move AGP up to high bus number so we don't need |
| * to reassign bus numbers for HT. If we ever have P2P bridges |
| * on AGP, we'll have to move pci_assign_all_buses to the |
| * pci_controller structure so we enable it for AGP and not for |
| * HT childs. |
| * We hard code the address because of the different size of |
| * the reg address cell, we shall fix that by killing struct |
| * reg_property and using some accessor functions instead |
| */ |
| hose->first_busno = 0xf0; |
| hose->last_busno = 0xff; |
| hose->ops = &u3_agp_pci_ops; |
| hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); |
| hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); |
| |
| u3_agp = hose; |
| } |
| |
| static void __init setup_u3_ht(struct pci_controller* hose) |
| { |
| hose->ops = &u3_ht_pci_ops; |
| |
| /* We hard code the address because of the different size of |
| * the reg address cell, we shall fix that by killing struct |
| * reg_property and using some accessor functions instead |
| */ |
| hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); |
| |
| hose->first_busno = 0; |
| hose->last_busno = 0xef; |
| |
| u3_ht = hose; |
| } |
| |
| static int __init add_bridge(struct device_node *dev) |
| { |
| int len; |
| struct pci_controller *hose; |
| char* disp_name; |
| int *bus_range; |
| int primary = 1; |
| struct property *of_prop; |
| |
| DBG("Adding PCI host bridge %s\n", dev->full_name); |
| |
| bus_range = (int *) get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", |
| dev->full_name); |
| } |
| |
| hose = alloc_bootmem(sizeof(struct pci_controller)); |
| if (hose == NULL) |
| return -ENOMEM; |
| pci_setup_pci_controller(hose); |
| |
| hose->arch_data = dev; |
| hose->first_busno = bus_range ? bus_range[0] : 0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| |
| of_prop = alloc_bootmem(sizeof(struct property) + |
| sizeof(hose->global_number)); |
| if (of_prop) { |
| memset(of_prop, 0, sizeof(struct property)); |
| of_prop->name = "linux,pci-domain"; |
| of_prop->length = sizeof(hose->global_number); |
| of_prop->value = (unsigned char *)&of_prop[1]; |
| memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); |
| prom_add_property(dev, of_prop); |
| } |
| |
| disp_name = NULL; |
| if (device_is_compatible(dev, "u3-agp")) { |
| setup_u3_agp(hose); |
| disp_name = "U3-AGP"; |
| primary = 0; |
| } else if (device_is_compatible(dev, "u3-ht")) { |
| setup_u3_ht(hose); |
| disp_name = "U3-HT"; |
| primary = 1; |
| } |
| printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", |
| disp_name, hose->first_busno, hose->last_busno); |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| pci_process_bridge_OF_ranges(hose, dev); |
| pci_setup_phb_io(hose, primary); |
| |
| /* Fixup "bus-range" OF property */ |
| fixup_bus_range(dev); |
| |
| return 0; |
| } |
| |
| |
| void __init maple_pcibios_fixup(void) |
| { |
| struct pci_dev *dev = NULL; |
| |
| DBG(" -> maple_pcibios_fixup\n"); |
| |
| for_each_pci_dev(dev) |
| pci_read_irq_line(dev); |
| |
| /* Do the mapping of the IO space */ |
| phbs_remap_io(); |
| |
| DBG(" <- maple_pcibios_fixup\n"); |
| } |
| |
| static void __init maple_fixup_phb_resources(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { |
| unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| hose->io_resource.start += offset; |
| hose->io_resource.end += offset; |
| printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", |
| hose->global_number, |
| hose->io_resource.start, hose->io_resource.end); |
| } |
| } |
| |
| void __init maple_pci_init(void) |
| { |
| struct device_node *np, *root; |
| struct device_node *ht = NULL; |
| |
| /* Probe root PCI hosts, that is on U3 the AGP host and the |
| * HyperTransport host. That one is actually "kept" around |
| * and actually added last as it's resource management relies |
| * on the AGP resources to have been setup first |
| */ |
| root = of_find_node_by_path("/"); |
| if (root == NULL) { |
| printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); |
| return; |
| } |
| for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { |
| if (np->name == NULL) |
| continue; |
| if (strcmp(np->name, "pci") == 0) { |
| if (add_bridge(np) == 0) |
| of_node_get(np); |
| } |
| if (strcmp(np->name, "ht") == 0) { |
| of_node_get(np); |
| ht = np; |
| } |
| } |
| of_node_put(root); |
| |
| /* Now setup the HyperTransport host if we found any |
| */ |
| if (ht && add_bridge(ht) != 0) |
| of_node_put(ht); |
| |
| /* Fixup the IO resources on our host bridges as the common code |
| * does it only for childs of the host bridges |
| */ |
| maple_fixup_phb_resources(); |
| |
| /* Setup the linkage between OF nodes and PHBs */ |
| pci_devs_phb_init(); |
| |
| /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We |
| * assume there is no P2P bridge on the AGP bus, which should be a |
| * safe assumptions hopefully. |
| */ |
| if (u3_agp) { |
| struct device_node *np = u3_agp->arch_data; |
| PCI_DN(np)->busno = 0xf0; |
| for (np = np->child; np; np = np->sibling) |
| PCI_DN(np)->busno = 0xf0; |
| } |
| |
| /* Tell pci.c to use the common resource allocation mecanism */ |
| pci_probe_only = 0; |
| |
| /* Allow all IO */ |
| io_page_mask = -1; |
| } |
| |
| int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) |
| { |
| struct device_node *np; |
| int irq = channel ? 15 : 14; |
| |
| if (pdev->vendor != PCI_VENDOR_ID_AMD || |
| pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) |
| return irq; |
| |
| np = pci_device_to_OF_node(pdev); |
| if (np == NULL) |
| return irq; |
| if (np->n_intrs < 2) |
| return irq; |
| return np->intrs[channel & 0x1].line; |
| } |
| |
| /* XXX: To remove once all firmwares are ok */ |
| static void fixup_maple_ide(struct pci_dev* dev) |
| { |
| #if 0 /* Enable this to enable IDE port 0 */ |
| { |
| u8 v; |
| |
| pci_read_config_byte(dev, 0x40, &v); |
| v |= 2; |
| pci_write_config_byte(dev, 0x40, v); |
| } |
| #endif |
| #if 0 /* fix bus master base */ |
| pci_write_config_dword(dev, 0x20, 0xcc01); |
| printk("old ide resource: %lx -> %lx \n", |
| dev->resource[4].start, dev->resource[4].end); |
| dev->resource[4].start = 0xcc00; |
| dev->resource[4].end = 0xcc10; |
| #endif |
| #if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ |
| { |
| struct pci_dev *apicdev; |
| u32 v; |
| |
| apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); |
| if (apicdev == NULL) |
| printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); |
| else { |
| pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); |
| pci_read_config_dword(apicdev, 0xf4, &v); |
| v &= ~0x00000022; |
| pci_write_config_dword(apicdev, 0xf4, v); |
| pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); |
| pci_read_config_dword(apicdev, 0xf4, &v); |
| v &= ~0x00000022; |
| pci_write_config_dword(apicdev, 0xf4, v); |
| pci_dev_put(apicdev); |
| } |
| } |
| #endif |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, |
| fixup_maple_ide); |