| /* |
| * linux/arch/arm/mm/proc-xscale.S |
| * |
| * Author: Nicolas Pitre |
| * Created: November 2000 |
| * Copyright: (C) 2000, 2001 MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * MMU functions for the Intel XScale CPUs |
| * |
| * 2001 Aug 21: |
| * some contributions by Brett Gaines <brett.w.gaines@intel.com> |
| * Copyright 2001 by Intel Corp. |
| * |
| * 2001 Sep 08: |
| * Completely revisited, many important fixes |
| * Nicolas Pitre <nico@cam.org> |
| */ |
| |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| #include <asm/assembler.h> |
| #include <asm/procinfo.h> |
| #include <asm/pgtable.h> |
| #include <asm/pgtable-hwdef.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include "proc-macros.S" |
| |
| /* |
| * This is the maximum size of an area which will be flushed. If the area |
| * is larger than this, then we flush the whole cache |
| */ |
| #define MAX_AREA_SIZE 32768 |
| |
| /* |
| * the cache line size of the I and D cache |
| */ |
| #define CACHELINESIZE 32 |
| |
| /* |
| * the size of the data cache |
| */ |
| #define CACHESIZE 32768 |
| |
| /* |
| * Virtual address used to allocate the cache when flushed |
| * |
| * This must be an address range which is _never_ used. It should |
| * apparently have a mapping in the corresponding page table for |
| * compatibility with future CPUs that _could_ require it. For instance we |
| * don't care. |
| * |
| * This must be aligned on a 2*CACHESIZE boundary. The code selects one of |
| * the 2 areas in alternance each time the clean_d_cache macro is used. |
| * Without this the XScale core exhibits cache eviction problems and no one |
| * knows why. |
| * |
| * Reminder: the vector table is located at 0xffff0000-0xffff0fff. |
| */ |
| #define CLEAN_ADDR 0xfffe0000 |
| |
| /* |
| * This macro is used to wait for a CP15 write and is needed |
| * when we have to ensure that the last operation to the co-pro |
| * was completed before continuing with operation. |
| */ |
| .macro cpwait, rd |
| mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 |
| mov \rd, \rd @ wait for completion |
| sub pc, pc, #4 @ flush instruction pipeline |
| .endm |
| |
| .macro cpwait_ret, lr, rd |
| mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 |
| sub pc, \lr, \rd, LSR #32 @ wait for completion and |
| @ flush instruction pipeline |
| .endm |
| |
| /* |
| * This macro cleans the entire dcache using line allocate. |
| * The main loop has been unrolled to reduce loop overhead. |
| * rd and rs are two scratch registers. |
| */ |
| .macro clean_d_cache, rd, rs |
| ldr \rs, =clean_addr |
| ldr \rd, [\rs] |
| eor \rd, \rd, #CACHESIZE |
| str \rd, [\rs] |
| add \rs, \rd, #CACHESIZE |
| 1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line |
| add \rd, \rd, #CACHELINESIZE |
| mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line |
| add \rd, \rd, #CACHELINESIZE |
| mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line |
| add \rd, \rd, #CACHELINESIZE |
| mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line |
| add \rd, \rd, #CACHELINESIZE |
| teq \rd, \rs |
| bne 1b |
| .endm |
| |
| .data |
| clean_addr: .word CLEAN_ADDR |
| |
| .text |
| |
| /* |
| * cpu_xscale_proc_init() |
| * |
| * Nothing too exciting at the moment |
| */ |
| ENTRY(cpu_xscale_proc_init) |
| mov pc, lr |
| |
| /* |
| * cpu_xscale_proc_fin() |
| */ |
| ENTRY(cpu_xscale_proc_fin) |
| str lr, [sp, #-4]! |
| mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE |
| msr cpsr_c, r0 |
| bl xscale_flush_kern_cache_all @ clean caches |
| mrc p15, 0, r0, c1, c0, 0 @ ctrl register |
| bic r0, r0, #0x1800 @ ...IZ........... |
| bic r0, r0, #0x0006 @ .............CA. |
| mcr p15, 0, r0, c1, c0, 0 @ disable caches |
| ldr pc, [sp], #4 |
| |
| /* |
| * cpu_xscale_reset(loc) |
| * |
| * Perform a soft reset of the system. Put the CPU into the |
| * same state as it would be if it had been reset, and branch |
| * to what would be the reset vector. |
| * |
| * loc: location to jump to for soft reset |
| * |
| * Beware PXA270 erratum E7. |
| */ |
| .align 5 |
| ENTRY(cpu_xscale_reset) |
| mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE |
| msr cpsr_c, r1 @ reset CPSR |
| mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB |
| mcr p15, 0, r1, c8, c5, 0 @ invalidate I-TLB |
| mrc p15, 0, r1, c1, c0, 0 @ ctrl register |
| bic r1, r1, #0x0086 @ ........B....CA. |
| bic r1, r1, #0x3900 @ ..VIZ..S........ |
| sub pc, pc, #4 @ flush pipeline |
| @ *** cache line aligned *** |
| mcr p15, 0, r1, c1, c0, 0 @ ctrl register |
| bic r1, r1, #0x0001 @ ...............M |
| mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB |
| mcr p15, 0, r1, c1, c0, 0 @ ctrl register |
| @ CAUTION: MMU turned off from this point. We count on the pipeline |
| @ already containing those two last instructions to survive. |
| mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs |
| mov pc, r0 |
| |
| /* |
| * cpu_xscale_do_idle() |
| * |
| * Cause the processor to idle |
| * |
| * For now we do nothing but go to idle mode for every case |
| * |
| * XScale supports clock switching, but using idle mode support |
| * allows external hardware to react to system state changes. |
| */ |
| .align 5 |
| |
| ENTRY(cpu_xscale_do_idle) |
| mov r0, #1 |
| mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE |
| mov pc, lr |
| |
| /* ================================= CACHE ================================ */ |
| |
| /* |
| * flush_user_cache_all() |
| * |
| * Invalidate all cache entries in a particular address |
| * space. |
| */ |
| ENTRY(xscale_flush_user_cache_all) |
| /* FALLTHROUGH */ |
| |
| /* |
| * flush_kern_cache_all() |
| * |
| * Clean and invalidate the entire cache. |
| */ |
| ENTRY(xscale_flush_kern_cache_all) |
| mov r2, #VM_EXEC |
| mov ip, #0 |
| __flush_whole_cache: |
| clean_d_cache r0, r1 |
| tst r2, #VM_EXEC |
| mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB |
| mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * flush_user_cache_range(start, end, vm_flags) |
| * |
| * Invalidate a range of cache entries in the specified |
| * address space. |
| * |
| * - start - start address (may not be aligned) |
| * - end - end address (exclusive, may not be aligned) |
| * - vma - vma_area_struct describing address space |
| */ |
| .align 5 |
| ENTRY(xscale_flush_user_cache_range) |
| mov ip, #0 |
| sub r3, r1, r0 @ calculate total size |
| cmp r3, #MAX_AREA_SIZE |
| bhs __flush_whole_cache |
| |
| 1: tst r2, #VM_EXEC |
| mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line |
| mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line |
| mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| tst r2, #VM_EXEC |
| mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB |
| mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * coherent_kern_range(start, end) |
| * |
| * Ensure coherency between the Icache and the Dcache in the |
| * region described by start. If you have non-snooping |
| * Harvard caches, you need to implement this function. |
| * |
| * - start - virtual start address |
| * - end - virtual end address |
| * |
| * Note: single I-cache line invalidation isn't used here since |
| * it also trashes the mini I-cache used by JTAG debuggers. |
| */ |
| ENTRY(xscale_coherent_kern_range) |
| bic r0, r0, #CACHELINESIZE - 1 |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * coherent_user_range(start, end) |
| * |
| * Ensure coherency between the Icache and the Dcache in the |
| * region described by start. If you have non-snooping |
| * Harvard caches, you need to implement this function. |
| * |
| * - start - virtual start address |
| * - end - virtual end address |
| */ |
| ENTRY(xscale_coherent_user_range) |
| bic r0, r0, #CACHELINESIZE - 1 |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * flush_kern_dcache_page(void *page) |
| * |
| * Ensure no D cache aliasing occurs, either with itself or |
| * the I cache |
| * |
| * - addr - page aligned address |
| */ |
| ENTRY(xscale_flush_kern_dcache_page) |
| add r1, r0, #PAGE_SZ |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * dma_inv_range(start, end) |
| * |
| * Invalidate (discard) the specified virtual address range. |
| * May not write back any entries. If 'start' or 'end' |
| * are not cache line aligned, those lines must be written |
| * back. |
| * |
| * - start - virtual start address |
| * - end - virtual end address |
| */ |
| ENTRY(xscale_dma_inv_range) |
| mrc p15, 0, r2, c0, c0, 0 @ read ID |
| eor r2, r2, #0x69000000 |
| eor r2, r2, #0x00052000 |
| bics r2, r2, #1 |
| beq xscale_dma_flush_range |
| |
| tst r0, #CACHELINESIZE - 1 |
| bic r0, r0, #CACHELINESIZE - 1 |
| mcrne p15, 0, r0, c7, c10, 1 @ clean D entry |
| tst r1, #CACHELINESIZE - 1 |
| mcrne p15, 0, r1, c7, c10, 1 @ clean D entry |
| 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * dma_clean_range(start, end) |
| * |
| * Clean the specified virtual address range. |
| * |
| * - start - virtual start address |
| * - end - virtual end address |
| */ |
| ENTRY(xscale_dma_clean_range) |
| bic r0, r0, #CACHELINESIZE - 1 |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| /* |
| * dma_flush_range(start, end) |
| * |
| * Clean and invalidate the specified virtual address range. |
| * |
| * - start - virtual start address |
| * - end - virtual end address |
| */ |
| ENTRY(xscale_dma_flush_range) |
| bic r0, r0, #CACHELINESIZE - 1 |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry |
| add r0, r0, #CACHELINESIZE |
| cmp r0, r1 |
| blo 1b |
| mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| ENTRY(xscale_cache_fns) |
| .long xscale_flush_kern_cache_all |
| .long xscale_flush_user_cache_all |
| .long xscale_flush_user_cache_range |
| .long xscale_coherent_kern_range |
| .long xscale_coherent_user_range |
| .long xscale_flush_kern_dcache_page |
| .long xscale_dma_inv_range |
| .long xscale_dma_clean_range |
| .long xscale_dma_flush_range |
| |
| ENTRY(cpu_xscale_dcache_clean_area) |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| add r0, r0, #CACHELINESIZE |
| subs r1, r1, #CACHELINESIZE |
| bhi 1b |
| mov pc, lr |
| |
| /* =============================== PageTable ============================== */ |
| |
| #define PTE_CACHE_WRITE_ALLOCATE 0 |
| |
| /* |
| * cpu_xscale_switch_mm(pgd) |
| * |
| * Set the translation base pointer to be as described by pgd. |
| * |
| * pgd: new page tables |
| */ |
| .align 5 |
| ENTRY(cpu_xscale_switch_mm) |
| clean_d_cache r1, r2 |
| mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB |
| mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mcr p15, 0, r0, c2, c0, 0 @ load page table pointer |
| mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs |
| cpwait_ret lr, ip |
| |
| /* |
| * cpu_xscale_set_pte(ptep, pte) |
| * |
| * Set a PTE and flush it out |
| * |
| * Errata 40: must set memory to write-through for user read-only pages. |
| */ |
| .align 5 |
| ENTRY(cpu_xscale_set_pte) |
| str r1, [r0], #-2048 @ linux version |
| |
| bic r2, r1, #0xff0 |
| orr r2, r2, #PTE_TYPE_EXT @ extended page |
| |
| eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY |
| |
| tst r3, #L_PTE_USER @ User? |
| orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w |
| |
| tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? |
| orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w |
| @ combined with user -> user r/w |
| |
| @ |
| @ Handle the X bit. We want to set this bit for the minicache |
| @ (U = E = B = W = 0, C = 1) or when write allocate is enabled, |
| @ and we have a writeable, cacheable region. If we ignore the |
| @ U and E bits, we can allow user space to use the minicache as |
| @ well. |
| @ |
| @ X = (C & ~W & ~B) | (C & W & B & write_allocate) |
| @ |
| eor ip, r1, #L_PTE_CACHEABLE |
| tst ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE |
| #if PTE_CACHE_WRITE_ALLOCATE |
| eorne ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE |
| tstne ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE |
| #endif |
| orreq r2, r2, #PTE_EXT_TEX(1) |
| |
| @ |
| @ Erratum 40: The B bit must be cleared for a user read-only |
| @ cacheable page. |
| @ |
| @ B = B & ~(U & C & ~W) |
| @ |
| and ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE |
| teq ip, #L_PTE_USER | L_PTE_CACHEABLE |
| biceq r2, r2, #PTE_BUFFERABLE |
| |
| tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? |
| movne r2, #0 @ no -> fault |
| |
| str r2, [r0] @ hardware version |
| mov ip, #0 |
| mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line |
| mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mov pc, lr |
| |
| |
| .ltorg |
| |
| .align |
| |
| __INIT |
| |
| .type __xscale_setup, #function |
| __xscale_setup: |
| mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB |
| mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer |
| mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs |
| #ifdef CONFIG_IWMMXT |
| mov r0, #0 @ initially disallow access to CP0/CP1 |
| #else |
| mov r0, #1 @ Allow access to CP0 |
| #endif |
| orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde |
| orr r0, r0, #1 << 13 @ Its undefined whether this |
| mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes |
| |
| adr r5, xscale_crval |
| ldmia r5, {r5, r6} |
| mrc p15, 0, r0, c1, c0, 0 @ get control register |
| bic r0, r0, r5 |
| orr r0, r0, r6 |
| mov pc, lr |
| .size __xscale_setup, . - __xscale_setup |
| |
| /* |
| * R |
| * .RVI ZFRS BLDP WCAM |
| * ..11 1.01 .... .101 |
| * |
| */ |
| .type xscale_crval, #object |
| xscale_crval: |
| crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900 |
| |
| __INITDATA |
| |
| /* |
| * Purpose : Function pointers used to access above functions - all calls |
| * come through these |
| */ |
| |
| .type xscale_processor_functions, #object |
| ENTRY(xscale_processor_functions) |
| .word v5t_early_abort |
| .word cpu_xscale_proc_init |
| .word cpu_xscale_proc_fin |
| .word cpu_xscale_reset |
| .word cpu_xscale_do_idle |
| .word cpu_xscale_dcache_clean_area |
| .word cpu_xscale_switch_mm |
| .word cpu_xscale_set_pte |
| .size xscale_processor_functions, . - xscale_processor_functions |
| |
| .section ".rodata" |
| |
| .type cpu_arch_name, #object |
| cpu_arch_name: |
| .asciz "armv5te" |
| .size cpu_arch_name, . - cpu_arch_name |
| |
| .type cpu_elf_name, #object |
| cpu_elf_name: |
| .asciz "v5" |
| .size cpu_elf_name, . - cpu_elf_name |
| |
| .type cpu_80200_name, #object |
| cpu_80200_name: |
| .asciz "XScale-80200" |
| .size cpu_80200_name, . - cpu_80200_name |
| |
| .type cpu_80219_name, #object |
| cpu_80219_name: |
| .asciz "XScale-80219" |
| .size cpu_80219_name, . - cpu_80219_name |
| |
| .type cpu_8032x_name, #object |
| cpu_8032x_name: |
| .asciz "XScale-IOP8032x Family" |
| .size cpu_8032x_name, . - cpu_8032x_name |
| |
| .type cpu_8033x_name, #object |
| cpu_8033x_name: |
| .asciz "XScale-IOP8033x Family" |
| .size cpu_8033x_name, . - cpu_8033x_name |
| |
| .type cpu_pxa250_name, #object |
| cpu_pxa250_name: |
| .asciz "XScale-PXA250" |
| .size cpu_pxa250_name, . - cpu_pxa250_name |
| |
| .type cpu_pxa210_name, #object |
| cpu_pxa210_name: |
| .asciz "XScale-PXA210" |
| .size cpu_pxa210_name, . - cpu_pxa210_name |
| |
| .type cpu_ixp42x_name, #object |
| cpu_ixp42x_name: |
| .asciz "XScale-IXP42x Family" |
| .size cpu_ixp42x_name, . - cpu_ixp42x_name |
| |
| .type cpu_ixp46x_name, #object |
| cpu_ixp46x_name: |
| .asciz "XScale-IXP46x Family" |
| .size cpu_ixp46x_name, . - cpu_ixp46x_name |
| |
| .type cpu_ixp2400_name, #object |
| cpu_ixp2400_name: |
| .asciz "XScale-IXP2400" |
| .size cpu_ixp2400_name, . - cpu_ixp2400_name |
| |
| .type cpu_ixp2800_name, #object |
| cpu_ixp2800_name: |
| .asciz "XScale-IXP2800" |
| .size cpu_ixp2800_name, . - cpu_ixp2800_name |
| |
| .type cpu_pxa255_name, #object |
| cpu_pxa255_name: |
| .asciz "XScale-PXA255" |
| .size cpu_pxa255_name, . - cpu_pxa255_name |
| |
| .type cpu_pxa270_name, #object |
| cpu_pxa270_name: |
| .asciz "XScale-PXA270" |
| .size cpu_pxa270_name, . - cpu_pxa270_name |
| |
| .align |
| |
| .section ".proc.info.init", #alloc, #execinstr |
| |
| .type __80200_proc_info,#object |
| __80200_proc_info: |
| .long 0x69052000 |
| .long 0xfffffff0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_80200_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __80200_proc_info, . - __80200_proc_info |
| |
| .type __80219_proc_info,#object |
| __80219_proc_info: |
| .long 0x69052e20 |
| .long 0xffffffe0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_80219_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __80219_proc_info, . - __80219_proc_info |
| |
| .type __8032x_proc_info,#object |
| __8032x_proc_info: |
| .long 0x69052420 |
| .long 0xffffffe0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_8032x_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __8032x_proc_info, . - __8032x_proc_info |
| |
| .type __8033x_proc_info,#object |
| __8033x_proc_info: |
| .long 0x69054010 |
| .long 0xffffff30 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_8033x_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __8033x_proc_info, . - __8033x_proc_info |
| |
| .type __pxa250_proc_info,#object |
| __pxa250_proc_info: |
| .long 0x69052100 |
| .long 0xfffff7f0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_pxa250_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __pxa250_proc_info, . - __pxa250_proc_info |
| |
| .type __pxa210_proc_info,#object |
| __pxa210_proc_info: |
| .long 0x69052120 |
| .long 0xfffff3f0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_pxa210_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __pxa210_proc_info, . - __pxa210_proc_info |
| |
| .type __ixp2400_proc_info, #object |
| __ixp2400_proc_info: |
| .long 0x69054190 |
| .long 0xfffffff0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_ixp2400_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __ixp2400_proc_info, . - __ixp2400_proc_info |
| |
| .type __ixp2800_proc_info, #object |
| __ixp2800_proc_info: |
| .long 0x690541a0 |
| .long 0xfffffff0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_ixp2800_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __ixp2800_proc_info, . - __ixp2800_proc_info |
| |
| .type __ixp42x_proc_info, #object |
| __ixp42x_proc_info: |
| .long 0x690541c0 |
| .long 0xffffffc0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_ixp42x_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __ixp42x_proc_info, . - __ixp42x_proc_info |
| |
| .type __ixp46x_proc_info, #object |
| __ixp46x_proc_info: |
| .long 0x69054200 |
| .long 0xffffff00 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_ixp46x_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __ixp46x_proc_info, . - __ixp46x_proc_info |
| |
| .type __pxa255_proc_info,#object |
| __pxa255_proc_info: |
| .long 0x69052d00 |
| .long 0xfffffff0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_pxa255_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __pxa255_proc_info, . - __pxa255_proc_info |
| |
| .type __pxa270_proc_info,#object |
| __pxa270_proc_info: |
| .long 0x69054110 |
| .long 0xfffffff0 |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_BUFFERABLE | \ |
| PMD_SECT_CACHEABLE | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __xscale_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP |
| .long cpu_pxa270_name |
| .long xscale_processor_functions |
| .long v4wbi_tlb_fns |
| .long xscale_mc_user_fns |
| .long xscale_cache_fns |
| .size __pxa270_proc_info, . - __pxa270_proc_info |
| |