| /* |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc. |
| * Elizabeth Clarke (beth@mips.com) |
| * Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) |
| */ |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/cpumask.h> |
| #include <linux/interrupt.h> |
| #include <linux/compiler.h> |
| |
| #include <asm/atomic.h> |
| #include <asm/cacheflush.h> |
| #include <asm/cpu.h> |
| #include <asm/processor.h> |
| #include <asm/system.h> |
| #include <asm/hardirq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/smp.h> |
| #include <asm/time.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/mips_mt.h> |
| |
| #define MIPS_CPU_IPI_RESCHED_IRQ 0 |
| #define MIPS_CPU_IPI_CALL_IRQ 1 |
| |
| static int cpu_ipi_resched_irq, cpu_ipi_call_irq; |
| |
| #if 0 |
| static void dump_mtregisters(int vpe, int tc) |
| { |
| printk("vpe %d tc %d\n", vpe, tc); |
| |
| settc(tc); |
| |
| printk(" c0 status 0x%lx\n", read_vpe_c0_status()); |
| printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); |
| printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); |
| printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); |
| printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); |
| printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); |
| printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); |
| } |
| #endif |
| |
| void __init sanitize_tlb_entries(void) |
| { |
| int i, tlbsiz; |
| unsigned long mvpconf0, ncpu; |
| |
| if (!cpu_has_mipsmt) |
| return; |
| |
| /* Enable VPC */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| back_to_back_c0_hazard(); |
| |
| /* Disable TLB sharing */ |
| clear_c0_mvpcontrol(MVPCONTROL_STLB); |
| |
| mvpconf0 = read_c0_mvpconf0(); |
| |
| printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0, |
| (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT, |
| (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT); |
| |
| tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT; |
| ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; |
| |
| printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu); |
| |
| if (tlbsiz > 0) { |
| /* share them out across the vpe's */ |
| tlbsiz /= ncpu; |
| |
| printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz); |
| |
| for (i = 0; i < ncpu; i++) { |
| settc(i); |
| |
| if (i == 0) |
| write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25)); |
| else |
| write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) | |
| (tlbsiz << 25)); |
| } |
| } |
| |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| } |
| |
| static void ipi_resched_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); |
| } |
| |
| static void ipi_call_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); |
| } |
| |
| static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) |
| { |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) |
| { |
| smp_call_function_interrupt(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction irq_resched = { |
| .handler = ipi_resched_interrupt, |
| .flags = IRQF_DISABLED|IRQF_PERCPU, |
| .name = "IPI_resched" |
| }; |
| |
| static struct irqaction irq_call = { |
| .handler = ipi_call_interrupt, |
| .flags = IRQF_DISABLED|IRQF_PERCPU, |
| .name = "IPI_call" |
| }; |
| |
| static void __init smp_copy_vpe_config(void) |
| { |
| write_vpe_c0_status( |
| (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); |
| |
| /* set config to be the same as vpe0, particularly kseg0 coherency alg */ |
| write_vpe_c0_config( read_c0_config()); |
| |
| /* make sure there are no software interrupts pending */ |
| write_vpe_c0_cause(0); |
| |
| /* Propagate Config7 */ |
| write_vpe_c0_config7(read_c0_config7()); |
| |
| write_vpe_c0_count(read_c0_count()); |
| } |
| |
| static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, |
| unsigned int ncpu) |
| { |
| if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) |
| return ncpu; |
| |
| /* Deactivate all but VPE 0 */ |
| if (tc != 0) { |
| unsigned long tmp = read_vpe_c0_vpeconf0(); |
| |
| tmp &= ~VPECONF0_VPA; |
| |
| /* master VPE */ |
| tmp |= VPECONF0_MVP; |
| write_vpe_c0_vpeconf0(tmp); |
| |
| /* Record this as available CPU */ |
| cpu_set(tc, phys_cpu_present_map); |
| __cpu_number_map[tc] = ++ncpu; |
| __cpu_logical_map[ncpu] = tc; |
| } |
| |
| /* Disable multi-threading with TC's */ |
| write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); |
| |
| if (tc != 0) |
| smp_copy_vpe_config(); |
| |
| return ncpu; |
| } |
| |
| static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) |
| { |
| unsigned long tmp; |
| |
| if (!tc) |
| return; |
| |
| /* bind a TC to each VPE, May as well put all excess TC's |
| on the last VPE */ |
| if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1)) |
| write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); |
| else { |
| write_tc_c0_tcbind(read_tc_c0_tcbind() | tc); |
| |
| /* and set XTC */ |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT)); |
| } |
| |
| tmp = read_tc_c0_tcstatus(); |
| |
| /* mark not allocated and not dynamically allocatable */ |
| tmp &= ~(TCSTATUS_A | TCSTATUS_DA); |
| tmp |= TCSTATUS_IXMT; /* interrupt exempt */ |
| write_tc_c0_tcstatus(tmp); |
| |
| write_tc_c0_tchalt(TCHALT_H); |
| } |
| |
| /* |
| * Common setup before any secondaries are started |
| * Make sure all CPU's are in a sensible state before we boot any of the |
| * secondarys |
| */ |
| void __init plat_smp_setup(void) |
| { |
| unsigned int mvpconf0, ntc, tc, ncpu = 0; |
| |
| #ifdef CONFIG_MIPS_MT_FPAFF |
| /* If we have an FPU, enroll ourselves in the FPU-full mask */ |
| if (cpu_has_fpu) |
| cpu_set(0, mt_fpu_cpumask); |
| #endif /* CONFIG_MIPS_MT_FPAFF */ |
| if (!cpu_has_mipsmt) |
| return; |
| |
| /* disable MT so we can configure */ |
| dvpe(); |
| dmt(); |
| |
| /* Put MVPE's into 'configuration state' */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| mvpconf0 = read_c0_mvpconf0(); |
| ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; |
| |
| /* we'll always have more TC's than VPE's, so loop setting everything |
| to a sensible state */ |
| for (tc = 0; tc <= ntc; tc++) { |
| settc(tc); |
| |
| smp_tc_init(tc, mvpconf0); |
| ncpu = smp_vpe_init(tc, mvpconf0, ncpu); |
| } |
| |
| /* Release config state */ |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| /* We'll wait until starting the secondaries before starting MVPE */ |
| |
| printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); |
| } |
| |
| void __init plat_prepare_cpus(unsigned int max_cpus) |
| { |
| mips_mt_set_cpuoptions(); |
| |
| /* set up ipi interrupts */ |
| if (cpu_has_vint) { |
| set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); |
| set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); |
| } |
| |
| cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; |
| cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; |
| |
| setup_irq(cpu_ipi_resched_irq, &irq_resched); |
| setup_irq(cpu_ipi_call_irq, &irq_call); |
| |
| set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); |
| set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); |
| } |
| |
| /* |
| * Setup the PC, SP, and GP of a secondary processor and start it |
| * running! |
| * smp_bootstrap is the place to resume from |
| * __KSTK_TOS(idle) is apparently the stack pointer |
| * (unsigned long)idle->thread_info the gp |
| * assumes a 1:1 mapping of TC => VPE |
| */ |
| void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) |
| { |
| struct thread_info *gp = task_thread_info(idle); |
| dvpe(); |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| settc(cpu); |
| |
| /* restart */ |
| write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); |
| |
| /* enable the tc this vpe/cpu will be running */ |
| write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); |
| |
| write_tc_c0_tchalt(0); |
| |
| /* enable the VPE */ |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); |
| |
| /* stack pointer */ |
| write_tc_gpr_sp( __KSTK_TOS(idle)); |
| |
| /* global pointer */ |
| write_tc_gpr_gp((unsigned long)gp); |
| |
| flush_icache_range((unsigned long)gp, |
| (unsigned long)(gp + sizeof(struct thread_info))); |
| |
| /* finally out of configuration and into chaos */ |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| evpe(EVPE_ENABLE); |
| } |
| |
| void __cpuinit prom_init_secondary(void) |
| { |
| /* Enable per-cpu interrupts */ |
| |
| /* This is Malta specific: IPI,performance and timer inetrrupts */ |
| write_c0_status((read_c0_status() & ~ST0_IM ) | |
| (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7)); |
| } |
| |
| void __cpuinit prom_smp_finish(void) |
| { |
| write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); |
| |
| #ifdef CONFIG_MIPS_MT_FPAFF |
| /* If we have an FPU, enroll ourselves in the FPU-full mask */ |
| if (cpu_has_fpu) |
| cpu_set(smp_processor_id(), mt_fpu_cpumask); |
| #endif /* CONFIG_MIPS_MT_FPAFF */ |
| |
| local_irq_enable(); |
| } |
| |
| void prom_cpus_done(void) |
| { |
| } |
| |
| void core_send_ipi(int cpu, unsigned int action) |
| { |
| int i; |
| unsigned long flags; |
| int vpflags; |
| |
| local_irq_save (flags); |
| |
| vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ |
| |
| switch (action) { |
| case SMP_CALL_FUNCTION: |
| i = C_SW1; |
| break; |
| |
| case SMP_RESCHEDULE_YOURSELF: |
| default: |
| i = C_SW0; |
| break; |
| } |
| |
| /* 1:1 mapping of vpe and tc... */ |
| settc(cpu); |
| write_vpe_c0_cause(read_vpe_c0_cause() | i); |
| evpe(vpflags); |
| |
| local_irq_restore(flags); |
| } |