| #ifndef _WACOM_I2C_FLASH_H_ |
| #define _WACOM_I2C_FLASH_H_ |
| |
| /* --------------------------------------------- */ |
| #define FLASH_START0 'f' |
| #define FLASH_START1 'l' |
| #define FLASH_START2 'a' |
| #define FLASH_START3 's' |
| #define FLASH_START4 'h' |
| #define FLASH_START5 '\r' |
| #define FLASH_ACK 0x06 |
| |
| #define WACOM_QUERY_SIZE 19 |
| #define pen_QUERY '*' |
| #define ACK 0 |
| |
| #define MPU_W9018 0x42 |
| |
| #define FLASH_BLOCK_SIZE 256 |
| #define DATA_SIZE (65536 * 2) |
| #define BLOCK_NUM 31 |
| #define W9018_START_ADDR 0x3000 |
| #define W9018_END_ADDR 0x1efff |
| |
| #define CMD_GET_FEATURE 2 |
| #define CMD_SET_FEATURE 3 |
| |
| /* Added for using this prog. in Linux user-space program */ |
| #define RTYPE_FEATURE 0x03 /* : Report type -> feature(11b) */ |
| #define GET_FEATURE 0x02 |
| #define SET_FEATURE 0x03 |
| #define GFEATURE_SIZE 6 |
| #define SFEATURE_SIZE 8 |
| |
| #define COMM_REG 0x04 |
| #define DATA_REG 0x05 |
| #define REPORT_ID_1 0x07 |
| #define REPORT_ID_2 0x08 |
| #define BOOT_QUERY_SIZE 5 |
| |
| #define REPORT_ID_ENTER_BOOT 2 |
| #define BOOT_CMD_SIZE (0x010c + 0x02) /* 78 */ |
| #define BOOT_RSP_SIZE 6 |
| #define BOOT_CMD_REPORT_ID 7 |
| #define BOOT_WRITE_FLASH 1 |
| #define BOOT_EXIT 3 |
| #define BOOT_BLVER 4 |
| #define BOOT_MPU 5 |
| #define BOOT_QUERY 7 |
| |
| #define QUERY_CMD 0x07 |
| #define BOOT_CMD 0x04 |
| #define MPU_CMD 0x05 |
| /* #define ERS_CMD 0x00 */ |
| #define ERS_ALL_CMD 0x10 |
| #define WRITE_CMD 0x01 |
| |
| #define ERS_ECH2 0x03 |
| #define QUERY_RSP 0x06 |
| |
| #define CMD_SIZE (72 + 6) |
| #define RSP_SIZE 6 |
| |
| #define PROCESS_INPROGRESS 0xff |
| #define PROCESS_COMPLETED 0x00 |
| #define PROCESS_CHKSUM1_ERR 0x81 |
| #define PROCESS_CHKSUM2_ERR 0x82 |
| #define PROCESS_TIMEOUT_ERR 0x87 |
| #define RETRY_COUNT 5 |
| |
| /* |
| * exit codes |
| */ |
| #define EXIT_OK (0) |
| #define EXIT_REBOOT (1) |
| #define EXIT_FAIL (2) |
| #define EXIT_USAGE (3) |
| #define EXIT_NO_SUCH_FILE (4) |
| #define EXIT_NO_INTEL_HEX (5) |
| #define EXIT_FAIL_OPEN_COM_PORT (6) |
| #define EXIT_FAIL_ENTER_FLASH_MODE (7) |
| #define EXIT_FAIL_FLASH_QUERY (8) |
| #define EXIT_FAIL_BAUDRATE_CHANGE (9) |
| #define EXIT_FAIL_WRITE_FIRMWARE (10) |
| #define EXIT_FAIL_EXIT_FLASH_MODE (11) |
| #define EXIT_CANCEL_UPDATE (12) |
| #define EXIT_SUCCESS_UPDATE (13) |
| #define EXIT_FAIL_HID2SERIAL (14) |
| #define EXIT_FAIL_VERIFY_FIRMWARE (15) |
| #define EXIT_FAIL_MAKE_WRITING_MARK (16) |
| #define EXIT_FAIL_ERASE_WRITING_MARK (17) |
| #define EXIT_FAIL_READ_WRITING_MARK (18) |
| #define EXIT_EXIST_MARKING (19) |
| #define EXIT_FAIL_MISMATCHING (20) |
| #define EXIT_FAIL_ERASE (21) |
| #define EXIT_FAIL_GET_BOOT_LOADER_VERSION (22) |
| #define EXIT_FAIL_GET_MPU_TYPE (23) |
| #define EXIT_MISMATCH_BOOTLOADER (24) |
| #define EXIT_MISMATCH_MPUTYPE (25) |
| #define EXIT_FAIL_ERASE_BOOT (26) |
| #define EXIT_FAIL_WRITE_BOOTLOADER (27) |
| #define EXIT_FAIL_SWAP_BOOT (28) |
| #define EXIT_FAIL_WRITE_DATA (29) |
| #define EXIT_FAIL_GET_FIRMWARE_VERSION (30) |
| #define EXIT_FAIL_GET_UNIT_ID (31) |
| #define EXIT_FAIL_SEND_STOP_COMMAND (32) |
| #define EXIT_FAIL_SEND_QUERY_COMMAND (33) |
| #define EXIT_NOT_FILE_FOR_535 (34) |
| #define EXIT_NOT_FILE_FOR_514 (35) |
| #define EXIT_NOT_FILE_FOR_503 (36) |
| #define EXIT_MISMATCH_MPU_TYPE (37) |
| #define EXIT_NOT_FILE_FOR_515 (38) |
| #define EXIT_NOT_FILE_FOR_1024 (39) |
| #define EXIT_FAIL_VERIFY_WRITING_MARK (40) |
| #define EXIT_DEVICE_NOT_FOUND (41) |
| #define EXIT_FAIL_WRITING_MARK_NOT_SET (42) |
| #define EXIT_FAIL_SET_PDCT (43) |
| #define ERR_SET_PDCT (44) |
| #define ERR_GET_PDCT (45) |
| |
| #endif /* _WACOM_I2C_FLASH_H_ */ |