| /* |
| * Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com> |
| * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> |
| * |
| * Description: |
| * Architecture- / platform-specific boot-time initialization code for |
| * the IBM iSeries LPAR. Adapted from original code by Grant Erickson and |
| * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek |
| * <dan@net4x.com>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/init.h> |
| #include <linux/threads.h> |
| #include <linux/smp.h> |
| #include <linux/param.h> |
| #include <linux/string.h> |
| #include <linux/seq_file.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/root_dev.h> |
| #include <linux/kernel.h> |
| |
| #include <asm/processor.h> |
| #include <asm/machdep.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/pgtable.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cputable.h> |
| #include <asm/sections.h> |
| #include <asm/iommu.h> |
| #include <asm/firmware.h> |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/paca.h> |
| #include <asm/cache.h> |
| #include <asm/sections.h> |
| #include <asm/abs_addr.h> |
| #include <asm/iseries/hv_lp_config.h> |
| #include <asm/iseries/hv_call_event.h> |
| #include <asm/iseries/hv_call_xm.h> |
| #include <asm/iseries/it_lp_queue.h> |
| #include <asm/iseries/mf.h> |
| #include <asm/iseries/hv_lp_event.h> |
| #include <asm/iseries/lpar_map.h> |
| #include <asm/udbg.h> |
| #include <asm/irq.h> |
| |
| #include "naca.h" |
| #include "setup.h" |
| #include "irq.h" |
| #include "vpd_areas.h" |
| #include "processor_vpd.h" |
| #include "it_lp_naca.h" |
| #include "main_store.h" |
| #include "call_sm.h" |
| #include "call_hpt.h" |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| /* Function Prototypes */ |
| static unsigned long build_iSeries_Memory_Map(void); |
| static void iseries_shared_idle(void); |
| static void iseries_dedicated_idle(void); |
| #ifdef CONFIG_PCI |
| extern void iSeries_pci_final_fixup(void); |
| #else |
| static void iSeries_pci_final_fixup(void) { } |
| #endif |
| |
| |
| struct MemoryBlock { |
| unsigned long absStart; |
| unsigned long absEnd; |
| unsigned long logicalStart; |
| unsigned long logicalEnd; |
| }; |
| |
| /* |
| * Process the main store vpd to determine where the holes in memory are |
| * and return the number of physical blocks and fill in the array of |
| * block data. |
| */ |
| static unsigned long iSeries_process_Condor_mainstore_vpd( |
| struct MemoryBlock *mb_array, unsigned long max_entries) |
| { |
| unsigned long holeFirstChunk, holeSizeChunks; |
| unsigned long numMemoryBlocks = 1; |
| struct IoHriMainStoreSegment4 *msVpd = |
| (struct IoHriMainStoreSegment4 *)xMsVpd; |
| unsigned long holeStart = msVpd->nonInterleavedBlocksStartAdr; |
| unsigned long holeEnd = msVpd->nonInterleavedBlocksEndAdr; |
| unsigned long holeSize = holeEnd - holeStart; |
| |
| printk("Mainstore_VPD: Condor\n"); |
| /* |
| * Determine if absolute memory has any |
| * holes so that we can interpret the |
| * access map we get back from the hypervisor |
| * correctly. |
| */ |
| mb_array[0].logicalStart = 0; |
| mb_array[0].logicalEnd = 0x100000000; |
| mb_array[0].absStart = 0; |
| mb_array[0].absEnd = 0x100000000; |
| |
| if (holeSize) { |
| numMemoryBlocks = 2; |
| holeStart = holeStart & 0x000fffffffffffff; |
| holeStart = addr_to_chunk(holeStart); |
| holeFirstChunk = holeStart; |
| holeSize = addr_to_chunk(holeSize); |
| holeSizeChunks = holeSize; |
| printk( "Main store hole: start chunk = %0lx, size = %0lx chunks\n", |
| holeFirstChunk, holeSizeChunks ); |
| mb_array[0].logicalEnd = holeFirstChunk; |
| mb_array[0].absEnd = holeFirstChunk; |
| mb_array[1].logicalStart = holeFirstChunk; |
| mb_array[1].logicalEnd = 0x100000000 - holeSizeChunks; |
| mb_array[1].absStart = holeFirstChunk + holeSizeChunks; |
| mb_array[1].absEnd = 0x100000000; |
| } |
| return numMemoryBlocks; |
| } |
| |
| #define MaxSegmentAreas 32 |
| #define MaxSegmentAdrRangeBlocks 128 |
| #define MaxAreaRangeBlocks 4 |
| |
| static unsigned long iSeries_process_Regatta_mainstore_vpd( |
| struct MemoryBlock *mb_array, unsigned long max_entries) |
| { |
| struct IoHriMainStoreSegment5 *msVpdP = |
| (struct IoHriMainStoreSegment5 *)xMsVpd; |
| unsigned long numSegmentBlocks = 0; |
| u32 existsBits = msVpdP->msAreaExists; |
| unsigned long area_num; |
| |
| printk("Mainstore_VPD: Regatta\n"); |
| |
| for (area_num = 0; area_num < MaxSegmentAreas; ++area_num ) { |
| unsigned long numAreaBlocks; |
| struct IoHriMainStoreArea4 *currentArea; |
| |
| if (existsBits & 0x80000000) { |
| unsigned long block_num; |
| |
| currentArea = &msVpdP->msAreaArray[area_num]; |
| numAreaBlocks = currentArea->numAdrRangeBlocks; |
| printk("ms_vpd: processing area %2ld blocks=%ld", |
| area_num, numAreaBlocks); |
| for (block_num = 0; block_num < numAreaBlocks; |
| ++block_num ) { |
| /* Process an address range block */ |
| struct MemoryBlock tempBlock; |
| unsigned long i; |
| |
| tempBlock.absStart = |
| (unsigned long)currentArea->xAdrRangeBlock[block_num].blockStart; |
| tempBlock.absEnd = |
| (unsigned long)currentArea->xAdrRangeBlock[block_num].blockEnd; |
| tempBlock.logicalStart = 0; |
| tempBlock.logicalEnd = 0; |
| printk("\n block %ld absStart=%016lx absEnd=%016lx", |
| block_num, tempBlock.absStart, |
| tempBlock.absEnd); |
| |
| for (i = 0; i < numSegmentBlocks; ++i) { |
| if (mb_array[i].absStart == |
| tempBlock.absStart) |
| break; |
| } |
| if (i == numSegmentBlocks) { |
| if (numSegmentBlocks == max_entries) |
| panic("iSeries_process_mainstore_vpd: too many memory blocks"); |
| mb_array[numSegmentBlocks] = tempBlock; |
| ++numSegmentBlocks; |
| } else |
| printk(" (duplicate)"); |
| } |
| printk("\n"); |
| } |
| existsBits <<= 1; |
| } |
| /* Now sort the blocks found into ascending sequence */ |
| if (numSegmentBlocks > 1) { |
| unsigned long m, n; |
| |
| for (m = 0; m < numSegmentBlocks - 1; ++m) { |
| for (n = numSegmentBlocks - 1; m < n; --n) { |
| if (mb_array[n].absStart < |
| mb_array[n-1].absStart) { |
| struct MemoryBlock tempBlock; |
| |
| tempBlock = mb_array[n]; |
| mb_array[n] = mb_array[n-1]; |
| mb_array[n-1] = tempBlock; |
| } |
| } |
| } |
| } |
| /* |
| * Assign "logical" addresses to each block. These |
| * addresses correspond to the hypervisor "bitmap" space. |
| * Convert all addresses into units of 256K chunks. |
| */ |
| { |
| unsigned long i, nextBitmapAddress; |
| |
| printk("ms_vpd: %ld sorted memory blocks\n", numSegmentBlocks); |
| nextBitmapAddress = 0; |
| for (i = 0; i < numSegmentBlocks; ++i) { |
| unsigned long length = mb_array[i].absEnd - |
| mb_array[i].absStart; |
| |
| mb_array[i].logicalStart = nextBitmapAddress; |
| mb_array[i].logicalEnd = nextBitmapAddress + length; |
| nextBitmapAddress += length; |
| printk(" Bitmap range: %016lx - %016lx\n" |
| " Absolute range: %016lx - %016lx\n", |
| mb_array[i].logicalStart, |
| mb_array[i].logicalEnd, |
| mb_array[i].absStart, mb_array[i].absEnd); |
| mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart & |
| 0x000fffffffffffff); |
| mb_array[i].absEnd = addr_to_chunk(mb_array[i].absEnd & |
| 0x000fffffffffffff); |
| mb_array[i].logicalStart = |
| addr_to_chunk(mb_array[i].logicalStart); |
| mb_array[i].logicalEnd = addr_to_chunk(mb_array[i].logicalEnd); |
| } |
| } |
| |
| return numSegmentBlocks; |
| } |
| |
| static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array, |
| unsigned long max_entries) |
| { |
| unsigned long i; |
| unsigned long mem_blocks = 0; |
| |
| if (cpu_has_feature(CPU_FTR_SLB)) |
| mem_blocks = iSeries_process_Regatta_mainstore_vpd(mb_array, |
| max_entries); |
| else |
| mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array, |
| max_entries); |
| |
| printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks); |
| for (i = 0; i < mem_blocks; ++i) { |
| printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n" |
| " abs chunks %016lx - %016lx\n", |
| i, mb_array[i].logicalStart, mb_array[i].logicalEnd, |
| mb_array[i].absStart, mb_array[i].absEnd); |
| } |
| return mem_blocks; |
| } |
| |
| static void __init iSeries_get_cmdline(void) |
| { |
| char *p, *q; |
| |
| /* copy the command line parameter from the primary VSP */ |
| HvCallEvent_dmaToSp(cmd_line, 2 * 64* 1024, 256, |
| HvLpDma_Direction_RemoteToLocal); |
| |
| p = cmd_line; |
| q = cmd_line + 255; |
| while(p < q) { |
| if (!*p || *p == '\n') |
| break; |
| ++p; |
| } |
| *p = 0; |
| } |
| |
| static void __init iSeries_init_early(void) |
| { |
| DBG(" -> iSeries_init_early()\n"); |
| |
| /* Snapshot the timebase, for use in later recalibration */ |
| iSeries_time_init_early(); |
| |
| /* |
| * Initialize the DMA/TCE management |
| */ |
| iommu_init_early_iSeries(); |
| |
| /* Initialize machine-dependency vectors */ |
| #ifdef CONFIG_SMP |
| smp_init_iSeries(); |
| #endif |
| |
| /* Associate Lp Event Queue 0 with processor 0 */ |
| HvCallEvent_setLpEventQueueInterruptProc(0, 0); |
| |
| mf_init(); |
| |
| DBG(" <- iSeries_init_early()\n"); |
| } |
| |
| struct mschunks_map mschunks_map = { |
| /* XXX We don't use these, but Piranha might need them. */ |
| .chunk_size = MSCHUNKS_CHUNK_SIZE, |
| .chunk_shift = MSCHUNKS_CHUNK_SHIFT, |
| .chunk_mask = MSCHUNKS_OFFSET_MASK, |
| }; |
| EXPORT_SYMBOL(mschunks_map); |
| |
| void mschunks_alloc(unsigned long num_chunks) |
| { |
| klimit = _ALIGN(klimit, sizeof(u32)); |
| mschunks_map.mapping = (u32 *)klimit; |
| klimit += num_chunks * sizeof(u32); |
| mschunks_map.num_chunks = num_chunks; |
| } |
| |
| /* |
| * The iSeries may have very large memories ( > 128 GB ) and a partition |
| * may get memory in "chunks" that may be anywhere in the 2**52 real |
| * address space. The chunks are 256K in size. To map this to the |
| * memory model Linux expects, the AS/400 specific code builds a |
| * translation table to translate what Linux thinks are "physical" |
| * addresses to the actual real addresses. This allows us to make |
| * it appear to Linux that we have contiguous memory starting at |
| * physical address zero while in fact this could be far from the truth. |
| * To avoid confusion, I'll let the words physical and/or real address |
| * apply to the Linux addresses while I'll use "absolute address" to |
| * refer to the actual hardware real address. |
| * |
| * build_iSeries_Memory_Map gets information from the Hypervisor and |
| * looks at the Main Store VPD to determine the absolute addresses |
| * of the memory that has been assigned to our partition and builds |
| * a table used to translate Linux's physical addresses to these |
| * absolute addresses. Absolute addresses are needed when |
| * communicating with the hypervisor (e.g. to build HPT entries) |
| * |
| * Returns the physical memory size |
| */ |
| |
| static unsigned long __init build_iSeries_Memory_Map(void) |
| { |
| u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; |
| u32 nextPhysChunk; |
| u32 hptFirstChunk, hptLastChunk, hptSizeChunks, hptSizePages; |
| u32 totalChunks,moreChunks; |
| u32 currChunk, thisChunk, absChunk; |
| u32 currDword; |
| u32 chunkBit; |
| u64 map; |
| struct MemoryBlock mb[32]; |
| unsigned long numMemoryBlocks, curBlock; |
| |
| /* Chunk size on iSeries is 256K bytes */ |
| totalChunks = (u32)HvLpConfig_getMsChunks(); |
| mschunks_alloc(totalChunks); |
| |
| /* |
| * Get absolute address of our load area |
| * and map it to physical address 0 |
| * This guarantees that the loadarea ends up at physical 0 |
| * otherwise, it might not be returned by PLIC as the first |
| * chunks |
| */ |
| |
| loadAreaFirstChunk = (u32)addr_to_chunk(itLpNaca.xLoadAreaAddr); |
| loadAreaSize = itLpNaca.xLoadAreaChunks; |
| |
| /* |
| * Only add the pages already mapped here. |
| * Otherwise we might add the hpt pages |
| * The rest of the pages of the load area |
| * aren't in the HPT yet and can still |
| * be assigned an arbitrary physical address |
| */ |
| if ((loadAreaSize * 64) > HvPagesToMap) |
| loadAreaSize = HvPagesToMap / 64; |
| |
| loadAreaLastChunk = loadAreaFirstChunk + loadAreaSize - 1; |
| |
| /* |
| * TODO Do we need to do something if the HPT is in the 64MB load area? |
| * This would be required if the itLpNaca.xLoadAreaChunks includes |
| * the HPT size |
| */ |
| |
| printk("Mapping load area - physical addr = 0000000000000000\n" |
| " absolute addr = %016lx\n", |
| chunk_to_addr(loadAreaFirstChunk)); |
| printk("Load area size %dK\n", loadAreaSize * 256); |
| |
| for (nextPhysChunk = 0; nextPhysChunk < loadAreaSize; ++nextPhysChunk) |
| mschunks_map.mapping[nextPhysChunk] = |
| loadAreaFirstChunk + nextPhysChunk; |
| |
| /* |
| * Get absolute address of our HPT and remember it so |
| * we won't map it to any physical address |
| */ |
| hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress()); |
| hptSizePages = (u32)HvCallHpt_getHptPages(); |
| hptSizeChunks = hptSizePages >> |
| (MSCHUNKS_CHUNK_SHIFT - HW_PAGE_SHIFT); |
| hptLastChunk = hptFirstChunk + hptSizeChunks - 1; |
| |
| printk("HPT absolute addr = %016lx, size = %dK\n", |
| chunk_to_addr(hptFirstChunk), hptSizeChunks * 256); |
| |
| /* |
| * Determine if absolute memory has any |
| * holes so that we can interpret the |
| * access map we get back from the hypervisor |
| * correctly. |
| */ |
| numMemoryBlocks = iSeries_process_mainstore_vpd(mb, 32); |
| |
| /* |
| * Process the main store access map from the hypervisor |
| * to build up our physical -> absolute translation table |
| */ |
| curBlock = 0; |
| currChunk = 0; |
| currDword = 0; |
| moreChunks = totalChunks; |
| |
| while (moreChunks) { |
| map = HvCallSm_get64BitsOfAccessMap(itLpNaca.xLpIndex, |
| currDword); |
| thisChunk = currChunk; |
| while (map) { |
| chunkBit = map >> 63; |
| map <<= 1; |
| if (chunkBit) { |
| --moreChunks; |
| while (thisChunk >= mb[curBlock].logicalEnd) { |
| ++curBlock; |
| if (curBlock >= numMemoryBlocks) |
| panic("out of memory blocks"); |
| } |
| if (thisChunk < mb[curBlock].logicalStart) |
| panic("memory block error"); |
| |
| absChunk = mb[curBlock].absStart + |
| (thisChunk - mb[curBlock].logicalStart); |
| if (((absChunk < hptFirstChunk) || |
| (absChunk > hptLastChunk)) && |
| ((absChunk < loadAreaFirstChunk) || |
| (absChunk > loadAreaLastChunk))) { |
| mschunks_map.mapping[nextPhysChunk] = |
| absChunk; |
| ++nextPhysChunk; |
| } |
| } |
| ++thisChunk; |
| } |
| ++currDword; |
| currChunk += 64; |
| } |
| |
| /* |
| * main store size (in chunks) is |
| * totalChunks - hptSizeChunks |
| * which should be equal to |
| * nextPhysChunk |
| */ |
| return chunk_to_addr(nextPhysChunk); |
| } |
| |
| /* |
| * Document me. |
| */ |
| static void __init iSeries_setup_arch(void) |
| { |
| if (get_lppaca()->shared_proc) { |
| ppc_md.idle_loop = iseries_shared_idle; |
| printk(KERN_DEBUG "Using shared processor idle loop\n"); |
| } else { |
| ppc_md.idle_loop = iseries_dedicated_idle; |
| printk(KERN_DEBUG "Using dedicated idle loop\n"); |
| } |
| |
| /* Setup the Lp Event Queue */ |
| setup_hvlpevent_queue(); |
| |
| printk("Max logical processors = %d\n", |
| itVpdAreas.xSlicMaxLogicalProcs); |
| printk("Max physical processors = %d\n", |
| itVpdAreas.xSlicMaxPhysicalProcs); |
| } |
| |
| static void iSeries_show_cpuinfo(struct seq_file *m) |
| { |
| seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n"); |
| } |
| |
| static void __init iSeries_progress(char * st, unsigned short code) |
| { |
| printk("Progress: [%04x] - %s\n", (unsigned)code, st); |
| mf_display_progress(code); |
| } |
| |
| static void __init iSeries_fixup_klimit(void) |
| { |
| /* |
| * Change klimit to take into account any ram disk |
| * that may be included |
| */ |
| if (naca.xRamDisk) |
| klimit = KERNELBASE + (u64)naca.xRamDisk + |
| (naca.xRamDiskSize * HW_PAGE_SIZE); |
| } |
| |
| static int __init iSeries_src_init(void) |
| { |
| /* clear the progress line */ |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) |
| ppc_md.progress(" ", 0xffff); |
| return 0; |
| } |
| |
| late_initcall(iSeries_src_init); |
| |
| static inline void process_iSeries_events(void) |
| { |
| asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); |
| } |
| |
| static void yield_shared_processor(void) |
| { |
| unsigned long tb; |
| |
| HvCall_setEnabledInterrupts(HvCall_MaskIPI | |
| HvCall_MaskLpEvent | |
| HvCall_MaskLpProd | |
| HvCall_MaskTimeout); |
| |
| tb = get_tb(); |
| /* Compute future tb value when yield should expire */ |
| HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); |
| |
| /* |
| * The decrementer stops during the yield. Force a fake decrementer |
| * here and let the timer_interrupt code sort out the actual time. |
| */ |
| get_lppaca()->int_dword.fields.decr_int = 1; |
| ppc64_runlatch_on(); |
| process_iSeries_events(); |
| } |
| |
| static void iseries_shared_idle(void) |
| { |
| while (1) { |
| while (!need_resched() && !hvlpevent_is_pending()) { |
| local_irq_disable(); |
| ppc64_runlatch_off(); |
| |
| /* Recheck with irqs off */ |
| if (!need_resched() && !hvlpevent_is_pending()) |
| yield_shared_processor(); |
| |
| HMT_medium(); |
| local_irq_enable(); |
| } |
| |
| ppc64_runlatch_on(); |
| |
| if (hvlpevent_is_pending()) |
| process_iSeries_events(); |
| |
| preempt_enable_no_resched(); |
| schedule(); |
| preempt_disable(); |
| } |
| } |
| |
| static void iseries_dedicated_idle(void) |
| { |
| set_thread_flag(TIF_POLLING_NRFLAG); |
| |
| while (1) { |
| if (!need_resched()) { |
| while (!need_resched()) { |
| ppc64_runlatch_off(); |
| HMT_low(); |
| |
| if (hvlpevent_is_pending()) { |
| HMT_medium(); |
| ppc64_runlatch_on(); |
| process_iSeries_events(); |
| } |
| } |
| |
| HMT_medium(); |
| } |
| |
| ppc64_runlatch_on(); |
| preempt_enable_no_resched(); |
| schedule(); |
| preempt_disable(); |
| } |
| } |
| |
| #ifndef CONFIG_PCI |
| void __init iSeries_init_IRQ(void) { } |
| #endif |
| |
| static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size, |
| unsigned long flags) |
| { |
| return (void __iomem *)address; |
| } |
| |
| static void iseries_iounmap(volatile void __iomem *token) |
| { |
| } |
| |
| static int __init iseries_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| if (!of_flat_dt_is_compatible(root, "IBM,iSeries")) |
| return 0; |
| |
| hpte_init_iSeries(); |
| /* iSeries does not support 16M pages */ |
| cur_cpu_spec->cpu_features &= ~CPU_FTR_16M_PAGE; |
| |
| return 1; |
| } |
| |
| define_machine(iseries) { |
| .name = "iSeries", |
| .setup_arch = iSeries_setup_arch, |
| .show_cpuinfo = iSeries_show_cpuinfo, |
| .init_IRQ = iSeries_init_IRQ, |
| .get_irq = iSeries_get_irq, |
| .init_early = iSeries_init_early, |
| .pcibios_fixup = iSeries_pci_final_fixup, |
| .restart = mf_reboot, |
| .power_off = mf_power_off, |
| .halt = mf_power_off, |
| .get_boot_time = iSeries_get_boot_time, |
| .set_rtc_time = iSeries_set_rtc_time, |
| .get_rtc_time = iSeries_get_rtc_time, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = iSeries_progress, |
| .probe = iseries_probe, |
| .ioremap = iseries_ioremap, |
| .iounmap = iseries_iounmap, |
| /* XXX Implement enable_pmcs for iSeries */ |
| }; |
| |
| void * __init iSeries_early_setup(void) |
| { |
| unsigned long phys_mem_size; |
| |
| /* Identify CPU type. This is done again by the common code later |
| * on but calling this function multiple times is fine. |
| */ |
| identify_cpu(0, mfspr(SPRN_PVR)); |
| |
| powerpc_firmware_features |= FW_FEATURE_ISERIES; |
| powerpc_firmware_features |= FW_FEATURE_LPAR; |
| |
| iSeries_fixup_klimit(); |
| |
| /* |
| * Initialize the table which translate Linux physical addresses to |
| * AS/400 absolute addresses |
| */ |
| phys_mem_size = build_iSeries_Memory_Map(); |
| |
| iSeries_get_cmdline(); |
| |
| return (void *) __pa(build_flat_dt(phys_mem_size)); |
| } |
| |
| static void hvputc(char c) |
| { |
| if (c == '\n') |
| hvputc('\r'); |
| |
| HvCall_writeLogBuffer(&c, 1); |
| } |
| |
| void __init udbg_init_iseries(void) |
| { |
| udbg_putc = hvputc; |
| } |