| /* |
| * Generic Generic NCR5380 driver |
| * |
| * Copyright 1995-2002, Russell King |
| */ |
| #include <linux/module.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/blkdev.h> |
| #include <linux/init.h> |
| |
| #include <asm/ecard.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| |
| #include "../scsi.h" |
| #include <scsi/scsi_host.h> |
| |
| #include <scsi/scsicam.h> |
| |
| #define AUTOSENSE |
| #define PSEUDO_DMA |
| |
| #define CUMANASCSI_PUBLIC_RELEASE 1 |
| |
| #define NCR5380_implementation_fields int port, ctrl |
| #define NCR5380_local_declare() struct Scsi_Host *_instance |
| #define NCR5380_setup(instance) _instance = instance |
| #define NCR5380_read(reg) cumanascsi_read(_instance, reg) |
| #define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value) |
| #define NCR5380_intr cumanascsi_intr |
| #define NCR5380_queue_command cumanascsi_queue_command |
| #define NCR5380_proc_info cumanascsi_proc_info |
| |
| #define BOARD_NORMAL 0 |
| #define BOARD_NCR53C400 1 |
| |
| #include "../NCR5380.h" |
| |
| void cumanascsi_setup(char *str, int *ints) |
| { |
| } |
| |
| const char *cumanascsi_info(struct Scsi_Host *spnt) |
| { |
| return ""; |
| } |
| |
| #ifdef NOT_EFFICIENT |
| #define CTRL(p,v) outb(*ctrl = (v), (p) - 577) |
| #define STAT(p) inb((p)+1) |
| #define IN(p) inb((p)) |
| #define OUT(v,p) outb((v), (p)) |
| #else |
| #define CTRL(p,v) (p[-2308] = (*ctrl = (v))) |
| #define STAT(p) (p[4]) |
| #define IN(p) (*(p)) |
| #define IN2(p) ((unsigned short)(*(volatile unsigned long *)(p))) |
| #define OUT(v,p) (*(p) = (v)) |
| #define OUT2(v,p) (*((volatile unsigned long *)(p)) = (v)) |
| #endif |
| #define L(v) (((v)<<16)|((v) & 0x0000ffff)) |
| #define H(v) (((v)>>16)|((v) & 0xffff0000)) |
| |
| static inline int |
| NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, int len) |
| { |
| int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; |
| int oldctrl = *ctrl; |
| unsigned long *laddr; |
| #ifdef NOT_EFFICIENT |
| int iobase = instance->io_port; |
| int dma_io = iobase & ~(0x3C0000>>2); |
| #else |
| volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); |
| volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); |
| #endif |
| |
| if(!len) return 0; |
| |
| CTRL(iobase, 0x02); |
| laddr = (unsigned long *)addr; |
| while(len >= 32) |
| { |
| int status; |
| unsigned long v; |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(!(status & 0x40)) |
| continue; |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); |
| len -= 32; |
| if(len == 0) |
| break; |
| } |
| |
| addr = (unsigned char *)laddr; |
| CTRL(iobase, 0x12); |
| while(len > 0) |
| { |
| int status; |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(status & 0x40) |
| { |
| OUT(*addr++, dma_io); |
| if(--len == 0) |
| break; |
| } |
| |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(status & 0x40) |
| { |
| OUT(*addr++, dma_io); |
| if(--len == 0) |
| break; |
| } |
| } |
| end: |
| CTRL(iobase, oldctrl|0x40); |
| return len; |
| } |
| |
| static inline int |
| NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, int len) |
| { |
| int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; |
| int oldctrl = *ctrl; |
| unsigned long *laddr; |
| #ifdef NOT_EFFICIENT |
| int iobase = instance->io_port; |
| int dma_io = iobase & ~(0x3C0000>>2); |
| #else |
| volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); |
| volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); |
| #endif |
| |
| if(!len) return 0; |
| |
| CTRL(iobase, 0x00); |
| laddr = (unsigned long *)addr; |
| while(len >= 32) |
| { |
| int status; |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(!(status & 0x40)) |
| continue; |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); |
| len -= 32; |
| if(len == 0) |
| break; |
| } |
| |
| addr = (unsigned char *)laddr; |
| CTRL(iobase, 0x10); |
| while(len > 0) |
| { |
| int status; |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(status & 0x40) |
| { |
| *addr++ = IN(dma_io); |
| if(--len == 0) |
| break; |
| } |
| |
| status = STAT(iobase); |
| if(status & 0x80) |
| goto end; |
| if(status & 0x40) |
| { |
| *addr++ = IN(dma_io); |
| if(--len == 0) |
| break; |
| } |
| } |
| end: |
| CTRL(iobase, oldctrl|0x40); |
| return len; |
| } |
| |
| #undef STAT |
| #undef CTRL |
| #undef IN |
| #undef OUT |
| |
| #define CTRL(p,v) outb(*ctrl = (v), (p) - 577) |
| |
| static char cumanascsi_read(struct Scsi_Host *instance, int reg) |
| { |
| unsigned int iobase = instance->io_port; |
| int i; |
| int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; |
| |
| CTRL(iobase, 0); |
| i = inb(iobase + 64 + reg); |
| CTRL(iobase, 0x40); |
| |
| return i; |
| } |
| |
| static void cumanascsi_write(struct Scsi_Host *instance, int reg, int value) |
| { |
| int iobase = instance->io_port; |
| int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; |
| |
| CTRL(iobase, 0); |
| outb(value, iobase + 64 + reg); |
| CTRL(iobase, 0x40); |
| } |
| |
| #undef CTRL |
| |
| #include "../NCR5380.c" |
| |
| static Scsi_Host_Template cumanascsi_template = { |
| .module = THIS_MODULE, |
| .name = "Cumana 16-bit SCSI", |
| .info = cumanascsi_info, |
| .queuecommand = cumanascsi_queue_command, |
| .eh_abort_handler = NCR5380_abort, |
| .eh_device_reset_handler= NCR5380_device_reset, |
| .eh_bus_reset_handler = NCR5380_bus_reset, |
| .eh_host_reset_handler = NCR5380_host_reset, |
| .can_queue = 16, |
| .this_id = 7, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = 2, |
| .unchecked_isa_dma = 0, |
| .use_clustering = DISABLE_CLUSTERING, |
| .proc_name = "CumanaSCSI-1", |
| }; |
| |
| static int __devinit |
| cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id) |
| { |
| struct Scsi_Host *host; |
| int ret = -ENOMEM; |
| |
| host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata)); |
| if (!host) |
| goto out; |
| |
| host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800; |
| host->irq = ec->irq; |
| |
| NCR5380_init(host, 0); |
| |
| host->n_io_port = 255; |
| if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) { |
| ret = -EBUSY; |
| goto out_free; |
| } |
| |
| ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0; |
| outb(0x00, host->io_port - 577); |
| |
| ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT, |
| "CumanaSCSI-1", host); |
| if (ret) { |
| printk("scsi%d: IRQ%d not free: %d\n", |
| host->host_no, host->irq, ret); |
| goto out_release; |
| } |
| |
| printk("scsi%d: at port 0x%08lx irq %d", |
| host->host_no, host->io_port, host->irq); |
| printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", |
| host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE); |
| printk("\nscsi%d:", host->host_no); |
| NCR5380_print_options(host); |
| printk("\n"); |
| |
| ret = scsi_add_host(host, &ec->dev); |
| if (ret) |
| goto out_free_irq; |
| |
| scsi_scan_host(host); |
| goto out; |
| |
| out_free_irq: |
| free_irq(host->irq, host); |
| out_release: |
| release_region(host->io_port, host->n_io_port); |
| out_free: |
| scsi_host_put(host); |
| out: |
| return ret; |
| } |
| |
| static void __devexit cumanascsi1_remove(struct expansion_card *ec) |
| { |
| struct Scsi_Host *host = ecard_get_drvdata(ec); |
| |
| ecard_set_drvdata(ec, NULL); |
| |
| scsi_remove_host(host); |
| free_irq(host->irq, host); |
| NCR5380_exit(host); |
| release_region(host->io_port, host->n_io_port); |
| scsi_host_put(host); |
| } |
| |
| static const struct ecard_id cumanascsi1_cids[] = { |
| { MANU_CUMANA, PROD_CUMANA_SCSI_1 }, |
| { 0xffff, 0xffff } |
| }; |
| |
| static struct ecard_driver cumanascsi1_driver = { |
| .probe = cumanascsi1_probe, |
| .remove = __devexit_p(cumanascsi1_remove), |
| .id_table = cumanascsi1_cids, |
| .drv = { |
| .name = "cumanascsi1", |
| }, |
| }; |
| |
| static int __init cumanascsi_init(void) |
| { |
| return ecard_register_driver(&cumanascsi1_driver); |
| } |
| |
| static void __exit cumanascsi_exit(void) |
| { |
| ecard_remove_driver(&cumanascsi1_driver); |
| } |
| |
| module_init(cumanascsi_init); |
| module_exit(cumanascsi_exit); |
| |
| MODULE_DESCRIPTION("Cumana SCSI-1 driver for Acorn machines"); |
| MODULE_LICENSE("GPL"); |