| /* |
| * CompactPCI Hot Plug Driver PCI functions |
| * |
| * Copyright (C) 2002 by SOMA Networks, Inc. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <scottm@somanetworks.com> |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include "../pci.h" |
| #include "pci_hotplug.h" |
| #include "cpci_hotplug.h" |
| |
| #if !defined(MODULE) |
| #define MY_NAME "cpci_hotplug" |
| #else |
| #define MY_NAME THIS_MODULE->name |
| #endif |
| |
| extern int cpci_debug; |
| |
| #define dbg(format, arg...) \ |
| do { \ |
| if(cpci_debug) \ |
| printk (KERN_DEBUG "%s: " format "\n", \ |
| MY_NAME , ## arg); \ |
| } while(0) |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) |
| |
| #define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1)) |
| |
| |
| u8 cpci_get_attention_status(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0; |
| } |
| |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return 0; |
| } |
| return hs_csr & 0x0008 ? 1 : 0; |
| } |
| |
| int cpci_set_attention_status(struct slot* slot, int status) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0; |
| } |
| |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return 0; |
| } |
| if(status) { |
| hs_csr |= HS_CSR_LOO; |
| } else { |
| hs_csr &= ~HS_CSR_LOO; |
| } |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| u16 cpci_get_hs_csr(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0xFFFF; |
| } |
| |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return 0xFFFF; |
| } |
| return hs_csr; |
| } |
| |
| #if 0 |
| u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr) |
| { |
| int hs_cap; |
| u16 new_hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0xFFFF; |
| } |
| |
| /* Write out the new value */ |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| return 0xFFFF; |
| } |
| |
| /* Read back what we just wrote out */ |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &new_hs_csr)) { |
| return 0xFFFF; |
| } |
| return new_hs_csr; |
| } |
| #endif |
| |
| int cpci_check_and_clear_ins(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| int ins = 0; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0; |
| } |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return 0; |
| } |
| if(hs_csr & HS_CSR_INS) { |
| /* Clear INS (by setting it) */ |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| ins = 0; |
| } |
| ins = 1; |
| } |
| return ins; |
| } |
| |
| int cpci_check_ext(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| int ext = 0; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return 0; |
| } |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return 0; |
| } |
| if(hs_csr & HS_CSR_EXT) { |
| ext = 1; |
| } |
| return ext; |
| } |
| |
| int cpci_clear_ext(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return -ENODEV; |
| } |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return -ENODEV; |
| } |
| if(hs_csr & HS_CSR_EXT) { |
| /* Clear EXT (by setting it) */ |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| int cpci_led_on(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return -ENODEV; |
| } |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return -ENODEV; |
| } |
| if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { |
| /* Set LOO */ |
| hs_csr |= HS_CSR_LOO; |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| err("Could not set LOO for slot %s", |
| slot->hotplug_slot->name); |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| int cpci_led_off(struct slot* slot) |
| { |
| int hs_cap; |
| u16 hs_csr; |
| |
| hs_cap = pci_bus_find_capability(slot->bus, |
| slot->devfn, |
| PCI_CAP_ID_CHSWP); |
| if(!hs_cap) { |
| return -ENODEV; |
| } |
| if(pci_bus_read_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| &hs_csr)) { |
| return -ENODEV; |
| } |
| if(hs_csr & HS_CSR_LOO) { |
| /* Clear LOO */ |
| hs_csr &= ~HS_CSR_LOO; |
| if(pci_bus_write_config_word(slot->bus, |
| slot->devfn, |
| hs_cap + 2, |
| hs_csr)) { |
| err("Could not clear LOO for slot %s", |
| slot->hotplug_slot->name); |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Device configuration functions |
| */ |
| |
| static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev) |
| { |
| u8 irq_pin; |
| int r; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| /* NOTE: device already setup from prior scan */ |
| |
| /* FIXME: How would we know if we need to enable the expansion ROM? */ |
| pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L); |
| |
| /* Assign resources */ |
| dbg("assigning resources for %02x:%02x.%x", |
| dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); |
| for (r = 0; r < 6; r++) { |
| struct resource *res = dev->resource + r; |
| if(res->flags) |
| pci_assign_resource(dev, r); |
| } |
| dbg("finished assigning resources for %02x:%02x.%x", |
| dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); |
| |
| /* Does this function have an interrupt at all? */ |
| dbg("checking for function interrupt"); |
| pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin); |
| if(irq_pin) { |
| dbg("function uses interrupt pin %d", irq_pin); |
| } |
| |
| /* |
| * Need to explicitly set irq field to 0 so that it'll get assigned |
| * by the pcibios platform dependent code called by pci_enable_device. |
| */ |
| dev->irq = 0; |
| |
| dbg("enabling device"); |
| pci_enable_device(dev); /* XXX check return */ |
| dbg("now dev->irq = %d", dev->irq); |
| if(irq_pin && dev->irq) { |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); |
| } |
| |
| /* Can't use pci_insert_device at the moment, do it manually for now */ |
| pci_proc_attach_device(dev); |
| dbg("notifying drivers"); |
| //pci_announce_device_to_drivers(dev); |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev) |
| { |
| int rc; |
| struct pci_bus* child; |
| struct resource* r; |
| u8 max, n; |
| u16 command; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| /* Do basic bridge initialization */ |
| rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); |
| if(rc) { |
| printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__); |
| } |
| rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); |
| if(rc) { |
| printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__); |
| } |
| rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4); |
| if(rc) { |
| printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__); |
| } |
| |
| /* |
| * Set parent bridge's subordinate field so that configuration space |
| * access will work in pci_scan_bridge and friends. |
| */ |
| max = pci_max_busnr(); |
| bus->subordinate = max + 1; |
| pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1); |
| |
| /* Scan behind bridge */ |
| n = pci_scan_bridge(bus, dev, max, 2); |
| child = pci_find_bus(0, max + 1); |
| if (!child) |
| return -ENODEV; |
| pci_proc_attach_bus(child); |
| |
| /* |
| * Update parent bridge's subordinate field if there were more bridges |
| * behind the bridge that was scanned. |
| */ |
| if(n > max) { |
| bus->subordinate = n; |
| pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n); |
| } |
| |
| /* |
| * Update the bridge resources of the bridge to accommodate devices |
| * behind it. |
| */ |
| pci_bus_size_bridges(child); |
| pci_bus_assign_resources(child); |
| |
| /* Enable resource mapping via command register */ |
| command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; |
| r = child->resource[0]; |
| if(r && r->start) { |
| command |= PCI_COMMAND_IO; |
| } |
| r = child->resource[1]; |
| if(r && r->start) { |
| command |= PCI_COMMAND_MEMORY; |
| } |
| r = child->resource[2]; |
| if(r && r->start) { |
| command |= PCI_COMMAND_MEMORY; |
| } |
| rc = pci_write_config_word(dev, PCI_COMMAND, command); |
| if(rc) { |
| err("Error setting command register"); |
| return rc; |
| } |
| |
| /* Set bridge control register */ |
| command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA; |
| rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command); |
| if(rc) { |
| err("Error setting bridge control register"); |
| return rc; |
| } |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev, |
| struct pci_bus_wrapped *wrapped_bus) |
| { |
| int rc; |
| struct pci_dev *dev = wrapped_dev->dev; |
| struct pci_bus *bus = wrapped_bus->bus; |
| struct slot* slot; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| /* |
| * We need to fix up the hotplug representation with the Linux |
| * representation. |
| */ |
| if(wrapped_dev->data) { |
| slot = (struct slot*) wrapped_dev->data; |
| slot->dev = dev; |
| } |
| |
| /* If it's a bridge, scan behind it for devices */ |
| if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { |
| rc = cpci_configure_bridge(bus, dev); |
| if(rc) |
| return rc; |
| } |
| |
| /* Actually configure device */ |
| if(dev) { |
| rc = cpci_configure_dev(bus, dev); |
| if(rc) |
| return rc; |
| } |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev, |
| struct pci_bus_wrapped *wrapped_bus) |
| { |
| struct pci_dev *dev = wrapped_dev->dev; |
| struct slot* slot; |
| |
| dbg("%s - enter", __FUNCTION__); |
| if(!dev) |
| return -ENODEV; |
| |
| /* Remove the Linux representation */ |
| if(pci_remove_device_safe(dev)) { |
| err("Could not remove device\n"); |
| return -1; |
| } |
| |
| /* |
| * Now remove the hotplug representation. |
| */ |
| if(wrapped_dev->data) { |
| slot = (struct slot*) wrapped_dev->data; |
| slot->dev = NULL; |
| } else { |
| dbg("No hotplug representation for %02x:%02x.%x", |
| dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); |
| } |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus, |
| struct pci_dev_wrapped *wrapped_dev) |
| { |
| struct pci_bus *bus = wrapped_bus->bus; |
| struct pci_bus *parent = bus->self->bus; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| /* The cleanup code for proc entries regarding buses should be in the kernel... */ |
| if(bus->procdir) |
| dbg("detach_pci_bus %s", bus->procdir->name); |
| pci_proc_detach_bus(bus); |
| |
| /* The cleanup code should live in the kernel... */ |
| bus->self->subordinate = NULL; |
| |
| /* unlink from parent bus */ |
| list_del(&bus->node); |
| |
| /* Now, remove */ |
| if(bus) |
| kfree(bus); |
| |
| /* Update parent's subordinate field */ |
| if(parent) { |
| u8 n = pci_bus_max_busnr(parent); |
| if(n < parent->subordinate) { |
| parent->subordinate = n; |
| pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n); |
| } |
| } |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static struct pci_visit configure_functions = { |
| .visit_pci_dev = configure_visit_pci_dev, |
| }; |
| |
| static struct pci_visit unconfigure_functions_phase2 = { |
| .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2, |
| .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2 |
| }; |
| |
| |
| int cpci_configure_slot(struct slot* slot) |
| { |
| int rc = 0; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| if(slot->dev == NULL) { |
| dbg("pci_dev null, finding %02x:%02x:%x", |
| slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn)); |
| slot->dev = pci_find_slot(slot->bus->number, slot->devfn); |
| } |
| |
| /* Still NULL? Well then scan for it! */ |
| if(slot->dev == NULL) { |
| int n; |
| dbg("pci_dev still null"); |
| |
| /* |
| * This will generate pci_dev structures for all functions, but |
| * we will only call this case when lookup fails. |
| */ |
| n = pci_scan_slot(slot->bus, slot->devfn); |
| dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n); |
| if(n > 0) |
| pci_bus_add_devices(slot->bus); |
| slot->dev = pci_find_slot(slot->bus->number, slot->devfn); |
| if(slot->dev == NULL) { |
| err("Could not find PCI device for slot %02x", slot->number); |
| return 0; |
| } |
| } |
| dbg("slot->dev = %p", slot->dev); |
| if(slot->dev) { |
| struct pci_dev *dev; |
| struct pci_dev_wrapped wrapped_dev; |
| struct pci_bus_wrapped wrapped_bus; |
| int i; |
| |
| memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); |
| memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); |
| |
| for (i = 0; i < 8; i++) { |
| dev = pci_find_slot(slot->bus->number, |
| PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i)); |
| if(!dev) |
| continue; |
| wrapped_dev.dev = dev; |
| wrapped_bus.bus = slot->dev->bus; |
| if(i) |
| wrapped_dev.data = NULL; |
| else |
| wrapped_dev.data = (void*) slot; |
| rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus); |
| } |
| } |
| |
| dbg("%s - exit, rc = %d", __FUNCTION__, rc); |
| return rc; |
| } |
| |
| int cpci_unconfigure_slot(struct slot* slot) |
| { |
| int rc = 0; |
| int i; |
| struct pci_dev_wrapped wrapped_dev; |
| struct pci_bus_wrapped wrapped_bus; |
| struct pci_dev *dev; |
| |
| dbg("%s - enter", __FUNCTION__); |
| |
| if(!slot->dev) { |
| err("No device for slot %02x\n", slot->number); |
| return -ENODEV; |
| } |
| |
| memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); |
| memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); |
| |
| for (i = 0; i < 8; i++) { |
| dev = pci_find_slot(slot->bus->number, |
| PCI_DEVFN(PCI_SLOT(slot->devfn), i)); |
| if(dev) { |
| wrapped_dev.dev = dev; |
| wrapped_bus.bus = dev->bus; |
| if(i) |
| wrapped_dev.data = NULL; |
| else |
| wrapped_dev.data = (void*) slot; |
| dbg("%s - unconfigure phase 2", __FUNCTION__); |
| rc = pci_visit_dev(&unconfigure_functions_phase2, |
| &wrapped_dev, |
| &wrapped_bus); |
| if(rc) |
| break; |
| } |
| } |
| dbg("%s - exit, rc = %d", __FUNCTION__, rc); |
| return rc; |
| } |