| /* |
| Driver for VES1893 and VES1993 QPSK Demodulators |
| |
| Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> |
| Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de> |
| Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de> |
| Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| #include "dvb_frontend.h" |
| #include "ves1x93.h" |
| |
| |
| struct ves1x93_state { |
| struct i2c_adapter* i2c; |
| struct dvb_frontend_ops ops; |
| /* configuration settings */ |
| const struct ves1x93_config* config; |
| struct dvb_frontend frontend; |
| |
| /* previous uncorrected block counter */ |
| fe_spectral_inversion_t inversion; |
| u8 *init_1x93_tab; |
| u8 *init_1x93_wtab; |
| u8 tab_size; |
| u8 demod_type; |
| }; |
| |
| static int debug = 0; |
| #define dprintk if (debug) printk |
| |
| #define DEMOD_VES1893 0 |
| #define DEMOD_VES1993 1 |
| |
| static u8 init_1893_tab [] = { |
| 0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4, |
| 0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00, |
| 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00, |
| 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x55, 0x00, 0x00, 0x7f, 0x00 |
| }; |
| |
| static u8 init_1993_tab [] = { |
| 0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c, |
| 0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00, |
| 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10, |
| 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03, |
| 0x00, 0x00, 0x0e, 0x80, 0x00 |
| }; |
| |
| static u8 init_1893_wtab[] = |
| { |
| 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, |
| 0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1, |
| 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, |
| 1,1,1,0,1,1 |
| }; |
| |
| static u8 init_1993_wtab[] = |
| { |
| 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, |
| 0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1, |
| 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, |
| 1,1,1,0,1,1,1,1, 1,1,1,1,1 |
| }; |
| |
| static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data) |
| { |
| u8 buf [] = { 0x00, reg, data }; |
| struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 }; |
| int err; |
| |
| if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { |
| dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); |
| return -EREMOTEIO; |
| } |
| |
| return 0; |
| } |
| |
| static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg) |
| { |
| int ret; |
| u8 b0 [] = { 0x00, reg }; |
| u8 b1 [] = { 0 }; |
| struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; |
| |
| ret = i2c_transfer (state->i2c, msg, 2); |
| |
| if (ret != 2) return ret; |
| |
| return b1[0]; |
| } |
| |
| static int ves1x93_clr_bit (struct ves1x93_state* state) |
| { |
| msleep(10); |
| ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe); |
| ves1x93_writereg (state, 0, state->init_1x93_tab[0]); |
| msleep(50); |
| return 0; |
| } |
| |
| static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion) |
| { |
| u8 val; |
| |
| /* |
| * inversion on/off are interchanged because i and q seem to |
| * be swapped on the hardware |
| */ |
| |
| switch (inversion) { |
| case INVERSION_OFF: |
| val = 0xc0; |
| break; |
| case INVERSION_ON: |
| val = 0x80; |
| break; |
| case INVERSION_AUTO: |
| val = 0x00; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val); |
| } |
| |
| static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec) |
| { |
| if (fec == FEC_AUTO) |
| return ves1x93_writereg (state, 0x0d, 0x08); |
| else if (fec < FEC_1_2 || fec > FEC_8_9) |
| return -EINVAL; |
| else |
| return ves1x93_writereg (state, 0x0d, fec - FEC_1_2); |
| } |
| |
| static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state) |
| { |
| return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7); |
| } |
| |
| static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate) |
| { |
| u32 BDR; |
| u32 ratio; |
| u8 ADCONF, FCONF, FNR, AGCR; |
| u32 BDRI; |
| u32 tmp; |
| u32 FIN; |
| |
| dprintk("%s: srate == %d\n", __FUNCTION__, (unsigned int) srate); |
| |
| if (srate > state->config->xin/2) |
| srate = state->config->xin/2; |
| |
| if (srate < 500000) |
| srate = 500000; |
| |
| #define MUL (1UL<<26) |
| |
| FIN = (state->config->xin + 6000) >> 4; |
| |
| tmp = srate << 6; |
| ratio = tmp / FIN; |
| |
| tmp = (tmp % FIN) << 8; |
| ratio = (ratio << 8) + tmp / FIN; |
| |
| tmp = (tmp % FIN) << 8; |
| ratio = (ratio << 8) + tmp / FIN; |
| |
| FNR = 0xff; |
| |
| if (ratio < MUL/3) FNR = 0; |
| if (ratio < (MUL*11)/50) FNR = 1; |
| if (ratio < MUL/6) FNR = 2; |
| if (ratio < MUL/9) FNR = 3; |
| if (ratio < MUL/12) FNR = 4; |
| if (ratio < (MUL*11)/200) FNR = 5; |
| if (ratio < MUL/24) FNR = 6; |
| if (ratio < (MUL*27)/1000) FNR = 7; |
| if (ratio < MUL/48) FNR = 8; |
| if (ratio < (MUL*137)/10000) FNR = 9; |
| |
| if (FNR == 0xff) { |
| ADCONF = 0x89; |
| FCONF = 0x80; |
| FNR = 0; |
| } else { |
| ADCONF = 0x81; |
| FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5); |
| /*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/ |
| } |
| |
| BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1; |
| BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1; |
| |
| dprintk("FNR= %d\n", FNR); |
| dprintk("ratio= %08x\n", (unsigned int) ratio); |
| dprintk("BDR= %08x\n", (unsigned int) BDR); |
| dprintk("BDRI= %02x\n", (unsigned int) BDRI); |
| |
| if (BDRI > 0xff) |
| BDRI = 0xff; |
| |
| ves1x93_writereg (state, 0x06, 0xff & BDR); |
| ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8)); |
| ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16)); |
| |
| ves1x93_writereg (state, 0x09, BDRI); |
| ves1x93_writereg (state, 0x20, ADCONF); |
| ves1x93_writereg (state, 0x21, FCONF); |
| |
| AGCR = state->init_1x93_tab[0x05]; |
| if (state->config->invert_pwm) |
| AGCR |= 0x20; |
| |
| if (srate < 6000000) |
| AGCR |= 0x80; |
| else |
| AGCR &= ~0x80; |
| |
| ves1x93_writereg (state, 0x05, AGCR); |
| |
| /* ves1993 hates this, will lose lock */ |
| if (state->demod_type != DEMOD_VES1993) |
| ves1x93_clr_bit (state); |
| |
| return 0; |
| } |
| |
| static int ves1x93_init (struct dvb_frontend* fe) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| int i; |
| int val; |
| |
| dprintk("%s: init chip\n", __FUNCTION__); |
| |
| for (i = 0; i < state->tab_size; i++) { |
| if (state->init_1x93_wtab[i]) { |
| val = state->init_1x93_tab[i]; |
| |
| if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */ |
| ves1x93_writereg (state, i, val); |
| } |
| } |
| |
| if (state->config->pll_init) { |
| ves1x93_writereg(state, 0x00, 0x11); |
| state->config->pll_init(fe); |
| ves1x93_writereg(state, 0x00, 0x01); |
| } |
| |
| return 0; |
| } |
| |
| static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| return ves1x93_writereg (state, 0x1f, 0x20); |
| case SEC_VOLTAGE_18: |
| return ves1x93_writereg (state, 0x1f, 0x30); |
| case SEC_VOLTAGE_OFF: |
| return ves1x93_writereg (state, 0x1f, 0x00); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| u8 sync = ves1x93_readreg (state, 0x0e); |
| |
| /* |
| * The ves1893 sometimes returns sync values that make no sense, |
| * because, e.g., the SIGNAL bit is 0, while some of the higher |
| * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?). |
| * Tests showed that the the VITERBI and SYNC bits are returned |
| * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong. |
| * If such a case occurs, we read the value again, until we get a |
| * valid value. |
| */ |
| int maxtry = 10; /* just for safety - let's not get stuck here */ |
| while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) { |
| msleep(10); |
| sync = ves1x93_readreg (state, 0x0e); |
| } |
| |
| *status = 0; |
| |
| if (sync & 1) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (sync & 2) |
| *status |= FE_HAS_CARRIER; |
| |
| if (sync & 4) |
| *status |= FE_HAS_VITERBI; |
| |
| if (sync & 8) |
| *status |= FE_HAS_SYNC; |
| |
| if ((sync & 0x1f) == 0x1f) |
| *status |= FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| *ber = ves1x93_readreg (state, 0x15); |
| *ber |= (ves1x93_readreg (state, 0x16) << 8); |
| *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16); |
| *ber *= 10; |
| |
| return 0; |
| } |
| |
| static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| u8 signal = ~ves1x93_readreg (state, 0x0b); |
| *strength = (signal << 8) | signal; |
| |
| return 0; |
| } |
| |
| static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| u8 _snr = ~ves1x93_readreg (state, 0x1c); |
| *snr = (_snr << 8) | _snr; |
| |
| return 0; |
| } |
| |
| static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f; |
| |
| if (*ucblocks == 0x7f) |
| *ucblocks = 0xffffffff; /* counter overflow... */ |
| |
| ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */ |
| ves1x93_writereg (state, 0x18, 0x80); /* dto. */ |
| |
| return 0; |
| } |
| |
| static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| ves1x93_writereg(state, 0x00, 0x11); |
| state->config->pll_set(fe, p); |
| ves1x93_writereg(state, 0x00, 0x01); |
| ves1x93_set_inversion (state, p->inversion); |
| ves1x93_set_fec (state, p->u.qpsk.fec_inner); |
| ves1x93_set_symbolrate (state, p->u.qpsk.symbol_rate); |
| state->inversion = p->inversion; |
| |
| return 0; |
| } |
| |
| static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| int afc; |
| |
| afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2; |
| afc = (afc * (int)(p->u.qpsk.symbol_rate/1000/8))/16; |
| |
| p->frequency -= afc; |
| |
| /* |
| * inversion indicator is only valid |
| * if auto inversion was used |
| */ |
| if (state->inversion == INVERSION_AUTO) |
| p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ? |
| INVERSION_OFF : INVERSION_ON; |
| p->u.qpsk.fec_inner = ves1x93_get_fec (state); |
| /* XXX FIXME: timing offset !! */ |
| |
| return 0; |
| } |
| |
| static int ves1x93_sleep(struct dvb_frontend* fe) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| |
| return ves1x93_writereg (state, 0x00, 0x08); |
| } |
| |
| static void ves1x93_release(struct dvb_frontend* fe) |
| { |
| struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops ves1x93_ops; |
| |
| struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct ves1x93_state* state = NULL; |
| u8 identity; |
| |
| /* allocate memory for the internal state */ |
| state = (struct ves1x93_state*) kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL); |
| if (state == NULL) goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| memcpy(&state->ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops)); |
| state->inversion = INVERSION_OFF; |
| |
| /* check if the demod is there + identify it */ |
| identity = ves1x93_readreg(state, 0x1e); |
| switch (identity) { |
| case 0xdc: /* VES1893A rev1 */ |
| printk("ves1x93: Detected ves1893a rev1\n"); |
| state->demod_type = DEMOD_VES1893; |
| state->init_1x93_tab = init_1893_tab; |
| state->init_1x93_wtab = init_1893_wtab; |
| state->tab_size = sizeof(init_1893_tab); |
| break; |
| |
| case 0xdd: /* VES1893A rev2 */ |
| printk("ves1x93: Detected ves1893a rev2\n"); |
| state->demod_type = DEMOD_VES1893; |
| state->init_1x93_tab = init_1893_tab; |
| state->init_1x93_wtab = init_1893_wtab; |
| state->tab_size = sizeof(init_1893_tab); |
| break; |
| |
| case 0xde: /* VES1993 */ |
| printk("ves1x93: Detected ves1993\n"); |
| state->demod_type = DEMOD_VES1993; |
| state->init_1x93_tab = init_1993_tab; |
| state->init_1x93_wtab = init_1993_wtab; |
| state->tab_size = sizeof(init_1993_tab); |
| break; |
| |
| default: |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops ves1x93_ops = { |
| |
| .info = { |
| .name = "VLSI VES1x93 DVB-S", |
| .type = FE_QPSK, |
| .frequency_min = 950000, |
| .frequency_max = 2150000, |
| .frequency_stepsize = 125, /* kHz for QPSK frontends */ |
| .frequency_tolerance = 29500, |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 45000000, |
| /* .symbol_rate_tolerance = ???,*/ |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK |
| }, |
| |
| .release = ves1x93_release, |
| |
| .init = ves1x93_init, |
| .sleep = ves1x93_sleep, |
| |
| .set_frontend = ves1x93_set_frontend, |
| .get_frontend = ves1x93_get_frontend, |
| |
| .read_status = ves1x93_read_status, |
| .read_ber = ves1x93_read_ber, |
| .read_signal_strength = ves1x93_read_signal_strength, |
| .read_snr = ves1x93_read_snr, |
| .read_ucblocks = ves1x93_read_ucblocks, |
| |
| .set_voltage = ves1x93_set_voltage, |
| }; |
| |
| module_param(debug, int, 0644); |
| |
| MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver"); |
| MODULE_AUTHOR("Ralph Metzler"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(ves1x93_attach); |