blob: dfbc7e0dcf70f7dedf71952c96d18a88e3ce02dd [file] [log] [blame]
/* $Id: winfixup.S,v 1.30 2002/02/09 19:49:30 davem Exp $
*
* winfixup.S: Handle cases where user stack pointer is found to be bogus.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/asi.h>
#include <asm/head.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/spitfire.h>
#include <asm/thread_info.h>
.text
set_pcontext:
cplus_winfixup_insn_1:
sethi %hi(0), %l1
mov PRIMARY_CONTEXT, %g1
sllx %l1, 32, %l1
cplus_winfixup_insn_2:
sethi %hi(0), %g2
or %l1, %g2, %l1
stxa %l1, [%g1] ASI_DMMU
flush %g6
retl
nop
cplus_wfinsn_1:
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1
cplus_wfinsn_2:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.align 32
/* Here are the rules, pay attention.
*
* The kernel is disallowed from touching user space while
* the trap level is greater than zero, except for from within
* the window spill/fill handlers. This must be followed
* so that we can easily detect the case where we tried to
* spill/fill with a bogus (or unmapped) user stack pointer.
*
* These are layed out in a special way for cache reasons,
* don't touch...
*/
.globl fill_fixup, spill_fixup
fill_fixup:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
or %g4, FAULT_CODE_WINFIXUP, %g4
be,pt %xcc, window_scheisse_from_user_common
and %g1, TSTATE_CWP, %g1
/* This is the extremely complex case, but it does happen from
* time to time if things are just right. Essentially the restore
* done in rtrap right before going back to user mode, with tl=1
* and that levels trap stack registers all setup, took a fill trap,
* the user stack was not mapped in the tlb, and tlb miss occurred,
* the pte found was not valid, and a simple ref bit watch update
* could not satisfy the miss, so we got here.
*
* We must carefully unwind the state so we get back to tl=0, preserve
* all the register values we were going to give to the user. Luckily
* most things are where they need to be, we also have the address
* which triggered the fault handy as well.
*
* Also note that we must preserve %l5 and %l6. If the user was
* returning from a system call, we must make it look this way
* after we process the fill fault on the users stack.
*
* First, get into the window where the original restore was executed.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g6, %o7 ! Get current.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6
ldx [%g6 + TI_TASK], %g4
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
/* This is the same as below, except we handle this a bit special
* since we must preserve %l5 and %l6, see comment above.
*/
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop ! yes, nop is correct
/* Be very careful about usage of the alternate globals here.
* You cannot touch %g4/%g5 as that has the fault information
* should this be from usermode. Also be careful for the case
* where we get here from the save instruction in etrap.S when
* coming from either user or kernel (does not matter which, it
* is the same problem in both cases). Essentially this means
* do not touch %g7 or %g2 so we handle the two cases fine.
*/
spill_fixup:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
b,pt %xcc, 2f
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
1: stw %l0, [%g3 + TI_REG_WINDOW + 0x00]
stw %l1, [%g3 + TI_REG_WINDOW + 0x04]
stw %l2, [%g3 + TI_REG_WINDOW + 0x08]
stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]
stw %l4, [%g3 + TI_REG_WINDOW + 0x10]
stw %l5, [%g3 + TI_REG_WINDOW + 0x14]
stw %l6, [%g3 + TI_REG_WINDOW + 0x18]
stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]
stw %i0, [%g3 + TI_REG_WINDOW + 0x20]
stw %i1, [%g3 + TI_REG_WINDOW + 0x24]
stw %i2, [%g3 + TI_REG_WINDOW + 0x28]
stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]
stw %i4, [%g3 + TI_REG_WINDOW + 0x30]
stw %i5, [%g3 + TI_REG_WINDOW + 0x34]
stw %i6, [%g3 + TI_REG_WINDOW + 0x38]
stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]
2: add %g1, 1, %g1
stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
and %g1, TSTATE_CWP, %g1
be,pn %xcc, window_scheisse_from_user_common
mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4
retry
window_scheisse_from_user_common:
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g1, %cwp
ba,pt %xcc, etrap
rd %pc, %g7
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_clr_l6
.globl winfix_mna, fill_fixup_mna, spill_fixup_mna
winfix_mna:
andn %g3, 0x7f, %g3
add %g3, 0x78, %g3
wrpr %g3, %tnpc
done
fill_fixup_mna:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o2 ! Setup args for
mov %g5, %o1 ! final call to mem_address_unaligned.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_mna:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_mna_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o2
mov %l5, %o1
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* These are only needed for 64-bit mode processes which
* put their stack pointer into the VPTE area and there
* happens to be a VPTE tlb entry mapped there during
* a spill/fill trap to that stack frame.
*/
.globl winfix_dax, fill_fixup_dax, spill_fixup_dax
winfix_dax:
andn %g3, 0x7f, %g3
add %g3, 0x74, %g3
wrpr %g3, %tnpc
done
fill_fixup_dax:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o1 ! Setup args for
mov %g5, %o2 ! final call to data_access_exception.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
call data_access_exception
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_dax:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_dax_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl cheetah_plus_patch_winfixup
cheetah_plus_patch_winfixup:
sethi %hi(cplus_wfinsn_1), %o0
sethi %hi(cplus_winfixup_insn_1), %o2
lduw [%o0 + %lo(cplus_wfinsn_1)], %o1
or %o2, %lo(cplus_winfixup_insn_1), %o2
stw %o1, [%o2]
flush %o2
sethi %hi(cplus_wfinsn_2), %o0
sethi %hi(cplus_winfixup_insn_2), %o2
lduw [%o0 + %lo(cplus_wfinsn_2)], %o1
or %o2, %lo(cplus_winfixup_insn_2), %o2
stw %o1, [%o2]
flush %o2
retl
nop