| /* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $ |
| * ebus.c: PCI to EBus bridge device. |
| * |
| * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) |
| * Copyright (C) 1999 David S. Miller (davem@redhat.com) |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| |
| #include <asm/system.h> |
| #include <asm/page.h> |
| #include <asm/pbm.h> |
| #include <asm/ebus.h> |
| #include <asm/oplib.h> |
| #include <asm/bpp.h> |
| #include <asm/irq.h> |
| |
| /* EBUS dma library. */ |
| |
| #define EBDMA_CSR 0x00UL /* Control/Status */ |
| #define EBDMA_ADDR 0x04UL /* DMA Address */ |
| #define EBDMA_COUNT 0x08UL /* DMA Count */ |
| |
| #define EBDMA_CSR_INT_PEND 0x00000001 |
| #define EBDMA_CSR_ERR_PEND 0x00000002 |
| #define EBDMA_CSR_DRAIN 0x00000004 |
| #define EBDMA_CSR_INT_EN 0x00000010 |
| #define EBDMA_CSR_RESET 0x00000080 |
| #define EBDMA_CSR_WRITE 0x00000100 |
| #define EBDMA_CSR_EN_DMA 0x00000200 |
| #define EBDMA_CSR_CYC_PEND 0x00000400 |
| #define EBDMA_CSR_DIAG_RD_DONE 0x00000800 |
| #define EBDMA_CSR_DIAG_WR_DONE 0x00001000 |
| #define EBDMA_CSR_EN_CNT 0x00002000 |
| #define EBDMA_CSR_TC 0x00004000 |
| #define EBDMA_CSR_DIS_CSR_DRN 0x00010000 |
| #define EBDMA_CSR_BURST_SZ_MASK 0x000c0000 |
| #define EBDMA_CSR_BURST_SZ_1 0x00080000 |
| #define EBDMA_CSR_BURST_SZ_4 0x00000000 |
| #define EBDMA_CSR_BURST_SZ_8 0x00040000 |
| #define EBDMA_CSR_BURST_SZ_16 0x000c0000 |
| #define EBDMA_CSR_DIAG_EN 0x00100000 |
| #define EBDMA_CSR_DIS_ERR_PEND 0x00400000 |
| #define EBDMA_CSR_TCI_DIS 0x00800000 |
| #define EBDMA_CSR_EN_NEXT 0x01000000 |
| #define EBDMA_CSR_DMA_ON 0x02000000 |
| #define EBDMA_CSR_A_LOADED 0x04000000 |
| #define EBDMA_CSR_NA_LOADED 0x08000000 |
| #define EBDMA_CSR_DEV_ID_MASK 0xf0000000 |
| |
| #define EBUS_DMA_RESET_TIMEOUT 10000 |
| |
| static void __ebus_dma_reset(struct ebus_dma_info *p, int no_drain) |
| { |
| int i; |
| u32 val = 0; |
| |
| writel(EBDMA_CSR_RESET, p->regs + EBDMA_CSR); |
| udelay(1); |
| |
| if (no_drain) |
| return; |
| |
| for (i = EBUS_DMA_RESET_TIMEOUT; i > 0; i--) { |
| val = readl(p->regs + EBDMA_CSR); |
| |
| if (!(val & (EBDMA_CSR_DRAIN | EBDMA_CSR_CYC_PEND))) |
| break; |
| udelay(10); |
| } |
| } |
| |
| static irqreturn_t ebus_dma_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct ebus_dma_info *p = dev_id; |
| unsigned long flags; |
| u32 csr = 0; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| csr = readl(p->regs + EBDMA_CSR); |
| writel(csr, p->regs + EBDMA_CSR); |
| spin_unlock_irqrestore(&p->lock, flags); |
| |
| if (csr & EBDMA_CSR_ERR_PEND) { |
| printk(KERN_CRIT "ebus_dma(%s): DMA error!\n", p->name); |
| p->callback(p, EBUS_DMA_EVENT_ERROR, p->client_cookie); |
| return IRQ_HANDLED; |
| } else if (csr & EBDMA_CSR_INT_PEND) { |
| p->callback(p, |
| (csr & EBDMA_CSR_TC) ? |
| EBUS_DMA_EVENT_DMA : EBUS_DMA_EVENT_DEVICE, |
| p->client_cookie); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| |
| } |
| |
| int ebus_dma_register(struct ebus_dma_info *p) |
| { |
| u32 csr; |
| |
| if (!p->regs) |
| return -EINVAL; |
| if (p->flags & ~(EBUS_DMA_FLAG_USE_EBDMA_HANDLER | |
| EBUS_DMA_FLAG_TCI_DISABLE)) |
| return -EINVAL; |
| if ((p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) && !p->callback) |
| return -EINVAL; |
| if (!strlen(p->name)) |
| return -EINVAL; |
| |
| __ebus_dma_reset(p, 1); |
| |
| csr = EBDMA_CSR_BURST_SZ_16 | EBDMA_CSR_EN_CNT; |
| |
| if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE) |
| csr |= EBDMA_CSR_TCI_DIS; |
| |
| writel(csr, p->regs + EBDMA_CSR); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ebus_dma_register); |
| |
| int ebus_dma_irq_enable(struct ebus_dma_info *p, int on) |
| { |
| unsigned long flags; |
| u32 csr; |
| |
| if (on) { |
| if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) { |
| if (request_irq(p->irq, ebus_dma_irq, SA_SHIRQ, p->name, p)) |
| return -EBUSY; |
| } |
| |
| spin_lock_irqsave(&p->lock, flags); |
| csr = readl(p->regs + EBDMA_CSR); |
| csr |= EBDMA_CSR_INT_EN; |
| writel(csr, p->regs + EBDMA_CSR); |
| spin_unlock_irqrestore(&p->lock, flags); |
| } else { |
| spin_lock_irqsave(&p->lock, flags); |
| csr = readl(p->regs + EBDMA_CSR); |
| csr &= ~EBDMA_CSR_INT_EN; |
| writel(csr, p->regs + EBDMA_CSR); |
| spin_unlock_irqrestore(&p->lock, flags); |
| |
| if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) { |
| free_irq(p->irq, p); |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ebus_dma_irq_enable); |
| |
| void ebus_dma_unregister(struct ebus_dma_info *p) |
| { |
| unsigned long flags; |
| u32 csr; |
| int irq_on = 0; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| csr = readl(p->regs + EBDMA_CSR); |
| if (csr & EBDMA_CSR_INT_EN) { |
| csr &= ~EBDMA_CSR_INT_EN; |
| writel(csr, p->regs + EBDMA_CSR); |
| irq_on = 1; |
| } |
| spin_unlock_irqrestore(&p->lock, flags); |
| |
| if (irq_on) |
| free_irq(p->irq, p); |
| } |
| EXPORT_SYMBOL(ebus_dma_unregister); |
| |
| int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, size_t len) |
| { |
| unsigned long flags; |
| u32 csr; |
| int err; |
| |
| if (len >= (1 << 24)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| csr = readl(p->regs + EBDMA_CSR); |
| err = -EINVAL; |
| if (!(csr & EBDMA_CSR_EN_DMA)) |
| goto out; |
| err = -EBUSY; |
| if (csr & EBDMA_CSR_NA_LOADED) |
| goto out; |
| |
| writel(len, p->regs + EBDMA_COUNT); |
| writel(bus_addr, p->regs + EBDMA_ADDR); |
| err = 0; |
| |
| out: |
| spin_unlock_irqrestore(&p->lock, flags); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ebus_dma_request); |
| |
| void ebus_dma_prepare(struct ebus_dma_info *p, int write) |
| { |
| unsigned long flags; |
| u32 csr; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| __ebus_dma_reset(p, 0); |
| |
| csr = (EBDMA_CSR_INT_EN | |
| EBDMA_CSR_EN_CNT | |
| EBDMA_CSR_BURST_SZ_16 | |
| EBDMA_CSR_EN_NEXT); |
| |
| if (write) |
| csr |= EBDMA_CSR_WRITE; |
| if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE) |
| csr |= EBDMA_CSR_TCI_DIS; |
| |
| writel(csr, p->regs + EBDMA_CSR); |
| |
| spin_unlock_irqrestore(&p->lock, flags); |
| } |
| EXPORT_SYMBOL(ebus_dma_prepare); |
| |
| unsigned int ebus_dma_residue(struct ebus_dma_info *p) |
| { |
| return readl(p->regs + EBDMA_COUNT); |
| } |
| EXPORT_SYMBOL(ebus_dma_residue); |
| |
| unsigned int ebus_dma_addr(struct ebus_dma_info *p) |
| { |
| return readl(p->regs + EBDMA_ADDR); |
| } |
| EXPORT_SYMBOL(ebus_dma_addr); |
| |
| void ebus_dma_enable(struct ebus_dma_info *p, int on) |
| { |
| unsigned long flags; |
| u32 orig_csr, csr; |
| |
| spin_lock_irqsave(&p->lock, flags); |
| orig_csr = csr = readl(p->regs + EBDMA_CSR); |
| if (on) |
| csr |= EBDMA_CSR_EN_DMA; |
| else |
| csr &= ~EBDMA_CSR_EN_DMA; |
| if ((orig_csr & EBDMA_CSR_EN_DMA) != |
| (csr & EBDMA_CSR_EN_DMA)) |
| writel(csr, p->regs + EBDMA_CSR); |
| spin_unlock_irqrestore(&p->lock, flags); |
| } |
| EXPORT_SYMBOL(ebus_dma_enable); |
| |
| struct linux_ebus *ebus_chain = NULL; |
| |
| #ifdef CONFIG_SUN_AUXIO |
| extern void auxio_probe(void); |
| #endif |
| |
| static inline void *ebus_alloc(size_t size) |
| { |
| void *mem; |
| |
| mem = kmalloc(size, GFP_ATOMIC); |
| if (!mem) |
| panic("ebus_alloc: out of memory"); |
| memset((char *)mem, 0, size); |
| return mem; |
| } |
| |
| static void __init ebus_ranges_init(struct linux_ebus *ebus) |
| { |
| int success; |
| |
| ebus->num_ebus_ranges = 0; |
| success = prom_getproperty(ebus->prom_node, "ranges", |
| (char *)ebus->ebus_ranges, |
| sizeof(ebus->ebus_ranges)); |
| if (success != -1) |
| ebus->num_ebus_ranges = (success/sizeof(struct linux_prom_ebus_ranges)); |
| } |
| |
| static void __init ebus_intmap_init(struct linux_ebus *ebus) |
| { |
| int success; |
| |
| ebus->num_ebus_intmap = 0; |
| success = prom_getproperty(ebus->prom_node, "interrupt-map", |
| (char *)ebus->ebus_intmap, |
| sizeof(ebus->ebus_intmap)); |
| if (success == -1) |
| return; |
| |
| ebus->num_ebus_intmap = (success/sizeof(struct linux_prom_ebus_intmap)); |
| |
| success = prom_getproperty(ebus->prom_node, "interrupt-map-mask", |
| (char *)&ebus->ebus_intmask, |
| sizeof(ebus->ebus_intmask)); |
| if (success == -1) { |
| prom_printf("%s: can't get interrupt-map-mask\n", __FUNCTION__); |
| prom_halt(); |
| } |
| } |
| |
| int __init ebus_intmap_match(struct linux_ebus *ebus, |
| struct linux_prom_registers *reg, |
| int *interrupt) |
| { |
| unsigned int hi, lo, irq; |
| int i; |
| |
| if (!ebus->num_ebus_intmap) |
| return 0; |
| |
| hi = reg->which_io & ebus->ebus_intmask.phys_hi; |
| lo = reg->phys_addr & ebus->ebus_intmask.phys_lo; |
| irq = *interrupt & ebus->ebus_intmask.interrupt; |
| for (i = 0; i < ebus->num_ebus_intmap; i++) { |
| if ((ebus->ebus_intmap[i].phys_hi == hi) && |
| (ebus->ebus_intmap[i].phys_lo == lo) && |
| (ebus->ebus_intmap[i].interrupt == irq)) { |
| *interrupt = ebus->ebus_intmap[i].cinterrupt; |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| void __init fill_ebus_child(int node, struct linux_prom_registers *preg, |
| struct linux_ebus_child *dev, int non_standard_regs) |
| { |
| int regs[PROMREG_MAX]; |
| int irqs[PROMREG_MAX]; |
| int i, len; |
| |
| dev->prom_node = node; |
| prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name)); |
| printk(" (%s)", dev->prom_name); |
| |
| len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); |
| dev->num_addrs = len / sizeof(regs[0]); |
| |
| if (non_standard_regs) { |
| /* This is to handle reg properties which are not |
| * in the parent relative format. One example are |
| * children of the i2c device on CompactPCI systems. |
| * |
| * So, for such devices we just record the property |
| * raw in the child resources. |
| */ |
| for (i = 0; i < dev->num_addrs; i++) |
| dev->resource[i].start = regs[i]; |
| } else { |
| for (i = 0; i < dev->num_addrs; i++) { |
| int rnum = regs[i]; |
| if (rnum >= dev->parent->num_addrs) { |
| prom_printf("UGH: property for %s was %d, need < %d\n", |
| dev->prom_name, len, dev->parent->num_addrs); |
| panic(__FUNCTION__); |
| } |
| dev->resource[i].start = dev->parent->resource[i].start; |
| dev->resource[i].end = dev->parent->resource[i].end; |
| dev->resource[i].flags = IORESOURCE_MEM; |
| dev->resource[i].name = dev->prom_name; |
| } |
| } |
| |
| for (i = 0; i < PROMINTR_MAX; i++) |
| dev->irqs[i] = PCI_IRQ_NONE; |
| |
| len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs)); |
| if ((len == -1) || (len == 0)) { |
| dev->num_irqs = 0; |
| /* |
| * Oh, well, some PROMs don't export interrupts |
| * property to children of EBus devices... |
| * |
| * Be smart about PS/2 keyboard and mouse. |
| */ |
| if (!strcmp(dev->parent->prom_name, "8042")) { |
| if (!strcmp(dev->prom_name, "kb_ps2")) { |
| dev->num_irqs = 1; |
| dev->irqs[0] = dev->parent->irqs[0]; |
| } else { |
| dev->num_irqs = 1; |
| dev->irqs[0] = dev->parent->irqs[1]; |
| } |
| } |
| } else { |
| dev->num_irqs = len / sizeof(irqs[0]); |
| for (i = 0; i < dev->num_irqs; i++) { |
| struct pci_pbm_info *pbm = dev->bus->parent; |
| struct pci_controller_info *p = pbm->parent; |
| |
| if (ebus_intmap_match(dev->bus, preg, &irqs[i]) != -1) { |
| dev->irqs[i] = p->irq_build(pbm, |
| dev->bus->self, |
| irqs[i]); |
| } else { |
| /* If we get a bogus interrupt property, just |
| * record the raw value instead of punting. |
| */ |
| dev->irqs[i] = irqs[i]; |
| } |
| } |
| } |
| } |
| |
| static int __init child_regs_nonstandard(struct linux_ebus_device *dev) |
| { |
| if (!strcmp(dev->prom_name, "i2c") || |
| !strcmp(dev->prom_name, "SUNW,lombus")) |
| return 1; |
| return 0; |
| } |
| |
| void __init fill_ebus_device(int node, struct linux_ebus_device *dev) |
| { |
| struct linux_prom_registers regs[PROMREG_MAX]; |
| struct linux_ebus_child *child; |
| int irqs[PROMINTR_MAX]; |
| int i, n, len; |
| |
| dev->prom_node = node; |
| prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name)); |
| printk(" [%s", dev->prom_name); |
| |
| len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); |
| if (len == -1) { |
| dev->num_addrs = 0; |
| goto probe_interrupts; |
| } |
| |
| if (len % sizeof(struct linux_prom_registers)) { |
| prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", |
| dev->prom_name, len, |
| (int)sizeof(struct linux_prom_registers)); |
| prom_halt(); |
| } |
| dev->num_addrs = len / sizeof(struct linux_prom_registers); |
| |
| for (i = 0; i < dev->num_addrs; i++) { |
| /* XXX Learn how to interpret ebus ranges... -DaveM */ |
| if (regs[i].which_io >= 0x10) |
| n = (regs[i].which_io - 0x10) >> 2; |
| else |
| n = regs[i].which_io; |
| |
| dev->resource[i].start = dev->bus->self->resource[n].start; |
| dev->resource[i].start += (unsigned long)regs[i].phys_addr; |
| dev->resource[i].end = |
| (dev->resource[i].start + (unsigned long)regs[i].reg_size - 1UL); |
| dev->resource[i].flags = IORESOURCE_MEM; |
| dev->resource[i].name = dev->prom_name; |
| request_resource(&dev->bus->self->resource[n], |
| &dev->resource[i]); |
| } |
| |
| probe_interrupts: |
| for (i = 0; i < PROMINTR_MAX; i++) |
| dev->irqs[i] = PCI_IRQ_NONE; |
| |
| len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs)); |
| if ((len == -1) || (len == 0)) { |
| dev->num_irqs = 0; |
| } else { |
| dev->num_irqs = len / sizeof(irqs[0]); |
| for (i = 0; i < dev->num_irqs; i++) { |
| struct pci_pbm_info *pbm = dev->bus->parent; |
| struct pci_controller_info *p = pbm->parent; |
| |
| if (ebus_intmap_match(dev->bus, ®s[0], &irqs[i]) != -1) { |
| dev->irqs[i] = p->irq_build(pbm, |
| dev->bus->self, |
| irqs[i]); |
| } else { |
| /* If we get a bogus interrupt property, just |
| * record the raw value instead of punting. |
| */ |
| dev->irqs[i] = irqs[i]; |
| } |
| } |
| } |
| |
| if ((node = prom_getchild(node))) { |
| printk(" ->"); |
| dev->children = ebus_alloc(sizeof(struct linux_ebus_child)); |
| |
| child = dev->children; |
| child->next = NULL; |
| child->parent = dev; |
| child->bus = dev->bus; |
| fill_ebus_child(node, ®s[0], |
| child, child_regs_nonstandard(dev)); |
| |
| while ((node = prom_getsibling(node)) != 0) { |
| child->next = ebus_alloc(sizeof(struct linux_ebus_child)); |
| |
| child = child->next; |
| child->next = NULL; |
| child->parent = dev; |
| child->bus = dev->bus; |
| fill_ebus_child(node, ®s[0], |
| child, child_regs_nonstandard(dev)); |
| } |
| } |
| printk("]"); |
| } |
| |
| static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p) |
| { |
| struct pci_dev *pdev = start; |
| |
| do { |
| pdev = pci_find_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev); |
| if (pdev && |
| (pdev->device == PCI_DEVICE_ID_SUN_EBUS || |
| pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)) |
| break; |
| } while (pdev != NULL); |
| |
| if (pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)) |
| *is_rio_p = 1; |
| else |
| *is_rio_p = 0; |
| |
| return pdev; |
| } |
| |
| void __init ebus_init(void) |
| { |
| struct pci_pbm_info *pbm; |
| struct linux_ebus_device *dev; |
| struct linux_ebus *ebus; |
| struct pci_dev *pdev; |
| struct pcidev_cookie *cookie; |
| int nd, ebusnd, is_rio; |
| int num_ebus = 0; |
| |
| pdev = find_next_ebus(NULL, &is_rio); |
| if (!pdev) { |
| printk("ebus: No EBus's found.\n"); |
| return; |
| } |
| |
| cookie = pdev->sysdata; |
| ebusnd = cookie->prom_node; |
| |
| ebus_chain = ebus = ebus_alloc(sizeof(struct linux_ebus)); |
| ebus->next = NULL; |
| ebus->is_rio = is_rio; |
| |
| while (ebusnd) { |
| /* SUNW,pci-qfe uses four empty ebuses on it. |
| I think we should not consider them here, |
| as they have half of the properties this |
| code expects and once we do PCI hot-plug, |
| we'd have to tweak with the ebus_chain |
| in the runtime after initialization. -jj */ |
| if (!prom_getchild (ebusnd)) { |
| pdev = find_next_ebus(pdev, &is_rio); |
| if (!pdev) { |
| if (ebus == ebus_chain) { |
| ebus_chain = NULL; |
| printk("ebus: No EBus's found.\n"); |
| return; |
| } |
| break; |
| } |
| ebus->is_rio = is_rio; |
| cookie = pdev->sysdata; |
| ebusnd = cookie->prom_node; |
| continue; |
| } |
| printk("ebus%d:", num_ebus); |
| |
| prom_getstring(ebusnd, "name", ebus->prom_name, sizeof(ebus->prom_name)); |
| ebus->index = num_ebus; |
| ebus->prom_node = ebusnd; |
| ebus->self = pdev; |
| ebus->parent = pbm = cookie->pbm; |
| |
| ebus_ranges_init(ebus); |
| ebus_intmap_init(ebus); |
| |
| nd = prom_getchild(ebusnd); |
| if (!nd) |
| goto next_ebus; |
| |
| ebus->devices = ebus_alloc(sizeof(struct linux_ebus_device)); |
| |
| dev = ebus->devices; |
| dev->next = NULL; |
| dev->children = NULL; |
| dev->bus = ebus; |
| fill_ebus_device(nd, dev); |
| |
| while ((nd = prom_getsibling(nd)) != 0) { |
| dev->next = ebus_alloc(sizeof(struct linux_ebus_device)); |
| |
| dev = dev->next; |
| dev->next = NULL; |
| dev->children = NULL; |
| dev->bus = ebus; |
| fill_ebus_device(nd, dev); |
| } |
| |
| next_ebus: |
| printk("\n"); |
| |
| pdev = find_next_ebus(pdev, &is_rio); |
| if (!pdev) |
| break; |
| |
| cookie = pdev->sysdata; |
| ebusnd = cookie->prom_node; |
| |
| ebus->next = ebus_alloc(sizeof(struct linux_ebus)); |
| ebus = ebus->next; |
| ebus->next = NULL; |
| ebus->is_rio = is_rio; |
| ++num_ebus; |
| } |
| |
| #ifdef CONFIG_SUN_AUXIO |
| auxio_probe(); |
| #endif |
| } |