| /* |
| * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/linkage.h> |
| #include <linux/mm.h> |
| #include <linux/blkdev.h> |
| #include <linux/bootmem.h> |
| #include <linux/smp.h> |
| |
| #include <asm/bootinfo.h> |
| #include <asm/reboot.h> |
| #include <asm/sibyte/board.h> |
| |
| #include "cfe_api.h" |
| #include "cfe_error.h" |
| |
| /* Max ram addressable in 32-bit segments */ |
| #ifdef CONFIG_MIPS64 |
| #define MAX_RAM_SIZE (~0ULL) |
| #else |
| #ifdef CONFIG_HIGHMEM |
| #ifdef CONFIG_64BIT_PHYS_ADDR |
| #define MAX_RAM_SIZE (~0ULL) |
| #else |
| #define MAX_RAM_SIZE (0xffffffffULL) |
| #endif |
| #else |
| #define MAX_RAM_SIZE (0x1fffffffULL) |
| #endif |
| #endif |
| |
| #define SIBYTE_MAX_MEM_REGIONS 8 |
| phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS]; |
| phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS]; |
| unsigned int board_mem_region_count; |
| |
| int cfe_cons_handle; |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| extern unsigned long initrd_start, initrd_end; |
| #endif |
| |
| #ifdef CONFIG_KGDB |
| extern int kgdb_port; |
| #endif |
| |
| static void ATTRIB_NORET cfe_linux_exit(void *arg) |
| { |
| int warm = *(int *)arg; |
| |
| if (smp_processor_id()) { |
| static int reboot_smp; |
| |
| /* Don't repeat the process from another CPU */ |
| if (!reboot_smp) { |
| /* Get CPU 0 to do the cfe_exit */ |
| reboot_smp = 1; |
| smp_call_function(cfe_linux_exit, arg, 1, 0); |
| } |
| } else { |
| printk("Passing control back to CFE...\n"); |
| cfe_exit(warm, 0); |
| printk("cfe_exit returned??\n"); |
| } |
| while (1); |
| } |
| |
| static void ATTRIB_NORET cfe_linux_restart(char *command) |
| { |
| static const int zero; |
| |
| cfe_linux_exit((void *)&zero); |
| } |
| |
| static void ATTRIB_NORET cfe_linux_halt(void) |
| { |
| static const int one = 1; |
| |
| cfe_linux_exit((void *)&one); |
| } |
| |
| static __init void prom_meminit(void) |
| { |
| u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */ |
| int mem_flags = 0; |
| unsigned int idx; |
| int rd_flag; |
| #ifdef CONFIG_BLK_DEV_INITRD |
| unsigned long initrd_pstart; |
| unsigned long initrd_pend; |
| |
| initrd_pstart = CPHYSADDR(initrd_start); |
| initrd_pend = CPHYSADDR(initrd_end); |
| if (initrd_start && |
| ((initrd_pstart > MAX_RAM_SIZE) |
| || (initrd_pend > MAX_RAM_SIZE))) { |
| panic("initrd out of addressable memory"); |
| } |
| |
| #endif /* INITRD */ |
| |
| for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE; |
| idx++) { |
| rd_flag = 0; |
| if (type == CFE_MI_AVAILABLE) { |
| /* |
| * See if this block contains (any portion of) the |
| * ramdisk |
| */ |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (initrd_start) { |
| if ((initrd_pstart > addr) && |
| (initrd_pstart < (addr + size))) { |
| add_memory_region(addr, |
| initrd_pstart - addr, |
| BOOT_MEM_RAM); |
| rd_flag = 1; |
| } |
| if ((initrd_pend > addr) && |
| (initrd_pend < (addr + size))) { |
| add_memory_region(initrd_pend, |
| (addr + size) - initrd_pend, |
| BOOT_MEM_RAM); |
| rd_flag = 1; |
| } |
| } |
| #endif |
| if (!rd_flag) { |
| if (addr > MAX_RAM_SIZE) |
| continue; |
| if (addr+size > MAX_RAM_SIZE) |
| size = MAX_RAM_SIZE - (addr+size) + 1; |
| /* |
| * memcpy/__copy_user prefetch, which |
| * will cause a bus error for |
| * KSEG/KUSEG addrs not backed by RAM. |
| * Hence, reserve some padding for the |
| * prefetch distance. |
| */ |
| if (size > 512) |
| size -= 512; |
| add_memory_region(addr, size, BOOT_MEM_RAM); |
| } |
| board_mem_region_addrs[board_mem_region_count] = addr; |
| board_mem_region_sizes[board_mem_region_count] = size; |
| board_mem_region_count++; |
| if (board_mem_region_count == |
| SIBYTE_MAX_MEM_REGIONS) { |
| /* |
| * Too many regions. Need to configure more |
| */ |
| while(1); |
| } |
| } |
| } |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (initrd_start) { |
| add_memory_region(initrd_pstart, initrd_pend - initrd_pstart, |
| BOOT_MEM_RESERVED); |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| static int __init initrd_setup(char *str) |
| { |
| char rdarg[64]; |
| int idx; |
| char *tmp, *endptr; |
| unsigned long initrd_size; |
| |
| /* Make a copy of the initrd argument so we can smash it up here */ |
| for (idx = 0; idx < sizeof(rdarg)-1; idx++) { |
| if (!str[idx] || (str[idx] == ' ')) break; |
| rdarg[idx] = str[idx]; |
| } |
| |
| rdarg[idx] = 0; |
| str = rdarg; |
| |
| /* |
| *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>" |
| * e.g. initrd=3abfd@80010000. This is set up by the loader. |
| */ |
| for (tmp = str; *tmp != '@'; tmp++) { |
| if (!*tmp) { |
| goto fail; |
| } |
| } |
| *tmp = 0; |
| tmp++; |
| if (!*tmp) { |
| goto fail; |
| } |
| initrd_size = simple_strtoul(str, &endptr, 16); |
| if (*endptr) { |
| *(tmp-1) = '@'; |
| goto fail; |
| } |
| *(tmp-1) = '@'; |
| initrd_start = simple_strtoul(tmp, &endptr, 16); |
| if (*endptr) { |
| goto fail; |
| } |
| initrd_end = initrd_start + initrd_size; |
| prom_printf("Found initrd of %lx@%lx\n", initrd_size, initrd_start); |
| return 1; |
| fail: |
| prom_printf("Bad initrd argument. Disabling initrd\n"); |
| initrd_start = 0; |
| initrd_end = 0; |
| return 1; |
| } |
| |
| #endif |
| |
| /* |
| * prom_init is called just after the cpu type is determined, from setup_arch() |
| */ |
| void __init prom_init(void) |
| { |
| uint64_t cfe_ept, cfe_handle; |
| unsigned int cfe_eptseal; |
| int argc = fw_arg0; |
| char **envp = (char **) fw_arg2; |
| int *prom_vec = (int *) fw_arg3; |
| #ifdef CONFIG_KGDB |
| char *arg; |
| #endif |
| |
| _machine_restart = cfe_linux_restart; |
| _machine_halt = cfe_linux_halt; |
| _machine_power_off = cfe_linux_halt; |
| |
| /* |
| * Check if a loader was used; if NOT, the 4 arguments are |
| * what CFE gives us (handle, 0, EPT and EPTSEAL) |
| */ |
| if (argc < 0) { |
| cfe_handle = (uint64_t)(long)argc; |
| cfe_ept = (long)envp; |
| cfe_eptseal = (uint32_t)(unsigned long)prom_vec; |
| } else { |
| if ((int32_t)(long)prom_vec < 0) { |
| /* |
| * Old loader; all it gives us is the handle, |
| * so use the "known" entrypoint and assume |
| * the seal. |
| */ |
| cfe_handle = (uint64_t)(long)prom_vec; |
| cfe_ept = (uint64_t)((int32_t)0x9fc00500); |
| cfe_eptseal = CFE_EPTSEAL; |
| } else { |
| /* |
| * Newer loaders bundle the handle/ept/eptseal |
| * Note: prom_vec is in the loader's useg |
| * which is still alive in the TLB. |
| */ |
| cfe_handle = (uint64_t)((int32_t *)prom_vec)[0]; |
| cfe_ept = (uint64_t)((int32_t *)prom_vec)[2]; |
| cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3]; |
| } |
| } |
| if (cfe_eptseal != CFE_EPTSEAL) { |
| /* too early for panic to do any good */ |
| prom_printf("CFE's entrypoint seal doesn't match. Spinning."); |
| while (1) ; |
| } |
| cfe_init(cfe_handle, cfe_ept); |
| /* |
| * Get the handle for (at least) prom_putchar, possibly for |
| * boot console |
| */ |
| cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); |
| if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { |
| if (argc < 0) { |
| /* |
| * It's OK for direct boot to not provide a |
| * command line |
| */ |
| strcpy(arcs_cmdline, "root=/dev/ram0 "); |
| #ifdef CONFIG_SIBYTE_PTSWARM |
| strcat(arcs_cmdline, "console=ttyS0,115200 "); |
| #endif |
| } else { |
| /* The loader should have set the command line */ |
| /* too early for panic to do any good */ |
| prom_printf("LINUX_CMDLINE not defined in cfe."); |
| while (1) ; |
| } |
| } |
| |
| #ifdef CONFIG_KGDB |
| if ((arg = strstr(arcs_cmdline,"kgdb=duart")) != NULL) |
| kgdb_port = (arg[10] == '0') ? 0 : 1; |
| else |
| kgdb_port = 1; |
| #endif |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| { |
| char *ptr; |
| /* Need to find out early whether we've got an initrd. So scan |
| the list looking now */ |
| for (ptr = arcs_cmdline; *ptr; ptr++) { |
| while (*ptr == ' ') { |
| ptr++; |
| } |
| if (!strncmp(ptr, "initrd=", 7)) { |
| initrd_setup(ptr+7); |
| break; |
| } else { |
| while (*ptr && (*ptr != ' ')) { |
| ptr++; |
| } |
| } |
| } |
| } |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| |
| /* Not sure this is needed, but it's the safe way. */ |
| arcs_cmdline[CL_SIZE-1] = 0; |
| |
| mips_machgroup = MACH_GROUP_SIBYTE; |
| prom_meminit(); |
| } |
| |
| unsigned long __init prom_free_prom_memory(void) |
| { |
| /* Not sure what I'm supposed to do here. Nothing, I think */ |
| return 0; |
| } |
| |
| void prom_putchar(char c) |
| { |
| int ret; |
| |
| while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0) |
| ; |
| } |