| /* |
| * Fujitsu B-series Lifebook PS/2 TouchScreen driver |
| * |
| * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> |
| * Copyright (c) 2005 Kenan Esau <kenan.esau@conan.de> |
| * |
| * TouchScreen detection, absolute mode setting and packet layout is taken from |
| * Harald Hoyer's description of the device. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| #include <linux/libps2.h> |
| #include <linux/dmi.h> |
| |
| #include "psmouse.h" |
| #include "lifebook.h" |
| |
| static struct dmi_system_id lifebook_dmi_table[] = { |
| { |
| .ident = "Lifebook B", |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"), |
| }, |
| }, |
| { } |
| }; |
| |
| |
| static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs) |
| { |
| unsigned char *packet = psmouse->packet; |
| struct input_dev *dev = &psmouse->dev; |
| |
| if (psmouse->pktcnt != 3) |
| return PSMOUSE_GOOD_DATA; |
| |
| input_regs(dev, regs); |
| |
| /* calculate X and Y */ |
| if ((packet[0] & 0x08) == 0x00) { |
| input_report_abs(dev, ABS_X, |
| (packet[1] | ((packet[0] & 0x30) << 4))); |
| input_report_abs(dev, ABS_Y, |
| 1024 - (packet[2] | ((packet[0] & 0xC0) << 2))); |
| } else { |
| input_report_rel(dev, REL_X, |
| ((packet[0] & 0x10) ? packet[1] - 256 : packet[1])); |
| input_report_rel(dev, REL_Y, |
| -(int)((packet[0] & 0x20) ? packet[2] - 256 : packet[2])); |
| } |
| |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); |
| input_report_key(dev, BTN_TOUCH, packet[0] & 0x04); |
| |
| input_sync(dev); |
| |
| return PSMOUSE_FULL_PACKET; |
| } |
| |
| static int lifebook_absolute_mode(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| unsigned char param; |
| |
| if (psmouse_reset(psmouse)) |
| return -1; |
| |
| /* |
| Enable absolute output -- ps2_command fails always but if |
| you leave this call out the touchsreen will never send |
| absolute coordinates |
| */ |
| param = 0x07; |
| ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES); |
| |
| return 0; |
| } |
| |
| static void lifebook_set_resolution(struct psmouse *psmouse, unsigned int resolution) |
| { |
| unsigned char params[] = { 0, 1, 2, 2, 3 }; |
| |
| if (resolution == 0 || resolution > 400) |
| resolution = 400; |
| |
| ps2_command(&psmouse->ps2dev, ¶ms[resolution / 100], PSMOUSE_CMD_SETRES); |
| psmouse->resolution = 50 << params[resolution / 100]; |
| } |
| |
| static void lifebook_disconnect(struct psmouse *psmouse) |
| { |
| psmouse_reset(psmouse); |
| } |
| |
| int lifebook_detect(struct psmouse *psmouse, int set_properties) |
| { |
| if (!dmi_check_system(lifebook_dmi_table)) |
| return -1; |
| |
| if (set_properties) { |
| psmouse->vendor = "Fujitsu"; |
| psmouse->name = "Lifebook TouchScreen"; |
| } |
| |
| return 0; |
| } |
| |
| int lifebook_init(struct psmouse *psmouse) |
| { |
| if (lifebook_absolute_mode(psmouse)) |
| return -1; |
| |
| psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL); |
| psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); |
| psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); |
| psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); |
| input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0); |
| input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0); |
| |
| psmouse->protocol_handler = lifebook_process_byte; |
| psmouse->set_resolution = lifebook_set_resolution; |
| psmouse->disconnect = lifebook_disconnect; |
| psmouse->reconnect = lifebook_absolute_mode; |
| psmouse->pktsize = 3; |
| |
| return 0; |
| } |
| |