| /* a96t3x6.h -- Linux driver for A96T3X6 chip as grip sensor |
| * |
| * Copyright (C) 2017 Samsung Electronics Co.Ltd |
| * Author: YunJae Hwang <yjz.hwang@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| */ |
| |
| #ifndef __LINUX_A96T3X6_H |
| #define __LINUX_A96T3X6_H |
| |
| #define VENDOR_NAME "ABOV" |
| #define MODEL_NAME "A96T3X6_SUB" |
| #define MODULE_NAME "grip_sensor_sub" |
| |
| #define NOTIFY_CABLE_USB 0x01 |
| #define NOTIFY_CABLE_OTG 0x03 |
| #define NOTIFY_CABLE_TA 0x25 |
| #define NOTIFY_CABLE_TA_FAC 0x27 |
| |
| /* registers */ |
| #define REG_LED_CONTROL 0x00 |
| #define REG_FW_VER 0x01 |
| #define REG_THRESHOLD 0x02 |
| #define REG_BTNSTATUS 0x07 |
| #define REG_DIFFDATA 0x0A |
| #define REG_RAWDATA 0x0E |
| #define REG_VENDORID 0x12 |
| #define REG_GLOVE 0x13 |
| #define REG_TSPTA 0x13 |
| #define REG_MODEL_NO 0x14 |
| #define REG_ID_NO 0x15 |
| #define REG_SAR_TOTALCAP 0x16 |
| #define REG_SAR_MODE 0x17 |
| #define REG_SAR_TOTALCAP_READ 0x18 |
| #define REG_GRIP_ALWAYS_ACTIVE 0x20 |
| #define REG_SW_RESET 0x1A |
| #define REG_SAR_ENABLE 0x24 |
| #define REG_SAR_SENSING 0x25 |
| #define REG_SAR_NOISE_THRESHOLD 0x26 |
| #define REG_SAR_BASELINE 0x28 |
| #define REG_SAR_DIFFDATA 0x2A |
| #define REG_SAR_DIFFDATA_D 0x2C |
| #define REG_SAR_RAWDATA 0x2E |
| #define REG_SAR_RAWDATA_D 0x30 |
| #define REG_SAR_THRESHOLD 0x32 |
| |
| #define REG_DATA_UPDATE 0x40 |
| #define REG_MODE_CHECK 0x41 |
| #define REG_LED_CTRL_ON 0x60 |
| #define REG_LED_CTRL_OFF 0x70 |
| #define REG_STOP_MODE 0x80 |
| |
| /* command */ |
| #define CMD_ON 0x20 |
| #define CMD_OFF 0x10 |
| #define CMD_SW_RESET 0x10 |
| |
| #define GRIP_ALWAYS_ACTIVE_READY 0x21 |
| |
| #define BOOT_DELAY 45000 |
| #define RESET_DELAY 150000 |
| #define FLASH_DELAY 1400000 |
| #define FLASH_MODE 0x18 |
| |
| #define TK_FW_PATH_BIN "abov/abov_noble.fw" |
| #define TK_FW_PATH_SDCARD "/sdcard/Firmware/GripSub/abov_fw.bin" |
| #if IS_ENABLED(CONFIG_HALL_NEW_NODE) |
| #define HALL_PATH "/sys/class/sec/hall_ic/hall_detect" |
| #else |
| #define HALL_PATH "/sys/class/sec/sec_key/hall_detect" |
| #endif |
| #define HALL_CLOSE_STATE 1 |
| |
| #define I2C_M_WR 0 /* for i2c */ |
| #define GRIP_LOG_TIME 15 /* 30s */ |
| |
| enum { |
| BUILT_IN = 0, |
| SDCARD, |
| }; |
| |
| #endif /* LINUX_A96T3X6_H */ |