| /* |
| * da9155_charger.c |
| * Samsung da9155 Charger Driver |
| * |
| * Copyright (C) 2015 Samsung Electronics |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "include/charger/da9155_charger.h" |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| |
| #define DEBUG |
| |
| #define ENABLE 1 |
| #define DISABLE 0 |
| static void da9155_set_charge_current(struct da9155_charger_data *charger, |
| int charge_current); |
| |
| static enum power_supply_property da9155_charger_props[] = { |
| }; |
| |
| static int da9155_read_reg(struct i2c_client *client, u8 reg, u8 *dest) |
| { |
| struct da9155_charger_data *charger = i2c_get_clientdata(client); |
| int ret = 0; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_smbus_read_byte_data(client, reg); |
| mutex_unlock(&charger->io_lock); |
| |
| if (ret < 0) { |
| pr_err("%s: can't read reg(0x%x), ret(%d)\n", __func__, reg, ret); |
| return ret; |
| } |
| |
| reg &= 0xFF; |
| *dest = ret; |
| |
| return 0; |
| } |
| |
| static int da9155_write_reg(struct i2c_client *client, u8 reg, u8 data) |
| { |
| struct da9155_charger_data *charger = i2c_get_clientdata(client); |
| int ret = 0; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| mutex_unlock(&charger->io_lock); |
| |
| if (ret < 0) |
| pr_err("%s: can't write reg(0x%x), ret(%d)\n", __func__, reg, ret); |
| |
| return ret; |
| } |
| |
| static int da9155_update_reg(struct i2c_client *client, u8 reg, u8 val, u8 mask) |
| { |
| struct da9155_charger_data *charger = i2c_get_clientdata(client); |
| int ret = 0; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_smbus_read_byte_data(client, reg); |
| |
| if (ret < 0) |
| pr_err("%s: can't update reg(0x%x), ret(%d)\n", __func__, reg, ret); |
| else { |
| u8 old_val = ret & 0xFF; |
| u8 new_val = (val & mask) | (old_val & (~mask)); |
| ret = i2c_smbus_write_byte_data(client, reg, new_val); |
| } |
| mutex_unlock(&charger->io_lock); |
| |
| return ret; |
| } |
| |
| static void da9155_charger_test_read(struct da9155_charger_data *charger) |
| { |
| u8 data = 0; |
| u32 addr = 0; |
| char str[1024]={0,}; |
| for (addr = 0x01; addr <= 0x13; addr++) { |
| da9155_read_reg(charger->i2c, addr, &data); |
| sprintf(str + strlen(str), "[0x%02x]0x%02x, ", addr, data); |
| } |
| pr_info("DA9155 : %s\n", str); |
| } |
| |
| static int da9155_get_charger_state(struct da9155_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| da9155_read_reg(charger->i2c, DA9155_STATUS_B, ®_data); |
| if (reg_data & DA9155_MODE_MASK) |
| return POWER_SUPPLY_STATUS_CHARGING; |
| return POWER_SUPPLY_STATUS_NOT_CHARGING; |
| } |
| |
| static int da9155_get_charger_health(struct da9155_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| // 80s same with maxim IC |
| if (da9155_write_reg(charger->i2c, DA9155_TIMER_B, 0x50) < 0) |
| { |
| dev_info(charger->dev, |
| "%s: addr: 0x%x write fail\n", __func__, DA9155_TIMER_B); |
| } |
| |
| da9155_read_reg(charger->i2c, DA9155_STATUS_A, ®_data); |
| if (reg_data & DA9155_S_VIN_UV_MASK) { |
| pr_info("%s: VIN undervoltage\n", __func__); |
| return POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| } else if (reg_data & DA9155_S_VIN_DROP_MASK) { |
| pr_info("%s: VIN DROP\n", __func__); |
| return POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| } else if (reg_data & DA9155_S_VIN_OV_MASK) { |
| pr_info("%s: VIN overvoltage\n", __func__); |
| return POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| } else |
| return POWER_SUPPLY_HEALTH_GOOD; |
| } |
| |
| static int da9155_get_charge_current(struct da9155_charger_data *charger) |
| { |
| u8 reg_data; |
| int charge_current; |
| |
| da9155_read_reg(charger->i2c, DA9155_BUCK_IOUT, ®_data); |
| charge_current = reg_data * 10 + 250; |
| |
| return charge_current; |
| } |
| |
| static void da9155_charger_initialize(struct da9155_charger_data *charger) |
| { |
| pr_info("%s\n", __func__); |
| |
| /* clear event reg */ |
| da9155_update_reg(charger->i2c, DA9155_EVENT_A, 0xFF, 0xFF); |
| da9155_update_reg(charger->i2c, DA9155_EVENT_B, 0xFF, 0xFF); |
| |
| /* Safety timer enable */ |
| da9155_update_reg(charger->i2c, DA9155_CONTROL_E, 0, DA9155_TIMER_DIS_MASK); |
| |
| /* VBAT_OV: MAX(5V) */ |
| da9155_update_reg(charger->i2c, DA9155_CONTROL_C, 0x38, DA9155_VBAT_OV_MASK); |
| } |
| |
| static void da9155_set_charger_state(struct da9155_charger_data *charger, |
| int enable) |
| { |
| u8 status = 0; |
| int current_setting = 0; |
| |
| pr_info("%s: BUCK_EN(%s)\n", enable > 0 ? "ENABLE" : "DISABLE", __func__); |
| |
| if (enable){ |
| da9155_charger_initialize(charger); |
| da9155_read_reg(charger->i2c, DA9155_STATUS_A, &status); |
| if (status & 0x7E ){ |
| pr_info("%s: STATUS_A(0x%X)\n", __func__, status); |
| return; |
| } |
| |
| current_setting = da9155_get_charge_current(charger); |
| da9155_set_charge_current(charger, 500); |
| da9155_update_reg(charger->i2c, DA9155_BUCK_CONT, DA9155_BUCK_EN_MASK, DA9155_BUCK_EN_MASK); |
| msleep(10); |
| if (current_setting > 500) |
| da9155_set_charge_current(charger, current_setting); |
| } |
| else { |
| current_setting = da9155_get_charge_current(charger); |
| if (current_setting > 700) { |
| da9155_set_charge_current(charger, 700); |
| msleep(100); |
| } |
| da9155_set_charge_current(charger, 500); |
| msleep(100); |
| da9155_update_reg(charger->i2c, DA9155_BUCK_CONT, 0, DA9155_BUCK_EN_MASK); |
| } |
| } |
| |
| #if 0 |
| static void da9155_set_input_current(struct da9155_charger_data *charger, |
| int input_current) |
| { |
| u8 reg_data; |
| |
| reg_data = (input_current - 3000) / 100; |
| |
| da9155_update_reg(charger->i2c, DA9155_BUCK_ILIM, reg_data, DA9155_BUCK_ILIM_MASK); |
| pr_info("%s: input_current(%d)\n", __func__, input_current); |
| } |
| #endif |
| |
| static void da9155_set_charge_current(struct da9155_charger_data *charger, |
| int charge_current) |
| { |
| u8 reg_data; |
| |
| if (!charge_current) { |
| reg_data = 0x00; |
| } else { |
| charge_current = (charge_current > 2500) ? 2500 : charge_current; |
| reg_data = (charge_current - 250) / 10; |
| } |
| |
| da9155_update_reg(charger->i2c, DA9155_BUCK_IOUT, reg_data, DA9155_BUCK_IOUT_MASK); |
| pr_info("%s: charge_current(%d)\n", __func__, charge_current); |
| } |
| |
| /* return : 0 (AFC type or High Voltage( > 6V), 1 : 5V ) */ |
| static int da9155_check_cable_type(unsigned int type) |
| { |
| if (type == SEC_BATTERY_CABLE_NONE) |
| return -1; |
| |
| // AFC or High Voltage charger (6V > ) |
| if (type == SEC_BATTERY_CABLE_9V_TA || \ |
| type == SEC_BATTERY_CABLE_12V_TA) { |
| return 0; |
| } |
| else { |
| return 1; |
| } |
| |
| return -1; |
| } |
| |
| static void da9155_set_vindrop_vbatov(struct da9155_charger_data *charger) |
| { |
| /* VBAT OV Enable */ |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x06); |
| da9155_write_reg(charger->i2c, 0x39, 0x05); |
| da9155_write_reg(charger->i2c, 0x19, 0x0); |
| da9155_write_reg(charger->i2c, 0x39, 0x0); |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x0); |
| |
| /* set VIN_DROP to 4.5V */ |
| da9155_write_reg(charger->i2c, DA9155_CONTROL_A, 0x4); |
| } |
| |
| static void da9155_mode_change(struct da9155_charger_data *charger, u8 enable) |
| { |
| if(charger->i2c) { |
| pr_info("%s: mode(%d), prev_cable_type(%d), cable_type(%d)\n", |
| __func__, enable,charger->prev_cable_type, charger->cable_type); |
| if (enable == ENABLE) { |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x06); |
| da9155_write_reg(charger->i2c, 0x39, 0x05); |
| da9155_write_reg(charger->i2c, 0x11, 0x04); |
| da9155_write_reg(charger->i2c, 0x39, 0x0); |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x0); |
| } else if (enable == DISABLE) { |
| if((charger->prev_cable_type == SEC_BATTERY_CABLE_9V_TA || |
| charger->prev_cable_type == SEC_BATTERY_CABLE_12V_TA) && |
| charger->cable_type == SEC_BATTERY_CABLE_NONE) |
| return; |
| |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x06); |
| da9155_write_reg(charger->i2c, 0x39, 0x05); |
| da9155_write_reg(charger->i2c, 0x11, 0x0); |
| if(charger->prev_cable_type != SEC_BATTERY_CABLE_9V_TA && |
| charger->prev_cable_type != SEC_BATTERY_CABLE_12V_TA && |
| charger->prev_cable_type != SEC_BATTERY_CABLE_NONE && |
| charger->cable_type == SEC_BATTERY_CABLE_NONE) |
| return; |
| |
| da9155_write_reg(charger->i2c, 0x39, 0x0); |
| da9155_write_reg(charger->i2c, DA9155_PAGE_CTRL_0, 0x0); |
| } |
| } |
| } |
| |
| static irqreturn_t da9155_irq_handler(int irq, void *data) |
| { |
| struct da9155_charger_data *charger = data; |
| u8 event_a, event_b; |
| |
| dev_info(charger->dev, |
| "%s: \n", __func__); |
| |
| if (!da9155_read_reg(charger->i2c, DA9155_EVENT_A, &event_a) && |
| !da9155_read_reg(charger->i2c, DA9155_EVENT_B, &event_b)) { |
| |
| if ((event_b & 0x1) && (charger->cable_type != SEC_BATTERY_CABLE_NONE)) { |
| dev_info(charger->dev, "%s: E_RDY Event occured", __func__); |
| da9155_mode_change(charger, da9155_check_cable_type(charger->cable_type)); |
| da9155_charger_initialize(charger); |
| da9155_set_vindrop_vbatov(charger); |
| } |
| |
| /* clear event reg */ |
| da9155_write_reg(charger->i2c, DA9155_EVENT_A, event_a); |
| da9155_write_reg(charger->i2c, DA9155_EVENT_B, event_b); |
| |
| dev_info(charger->dev, |
| "%s: EVENT_A(0x%x), EVENT_B(0x%x)\n", |
| __func__, event_a, event_b); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int da9155_chg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, union power_supply_propval *val) |
| { |
| struct da9155_charger_data *charger = |
| power_supply_get_drvdata(psy); |
| enum power_supply_ext_property ext_psp = psp; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_HEALTH: |
| if (charger->cable_type == SEC_BATTERY_CABLE_9V_TA || |
| charger->cable_type == SEC_BATTERY_CABLE_12V_TA) { |
| da9155_charger_test_read(charger); |
| val->intval = da9155_get_charger_health(charger); |
| } else |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = da9155_get_charger_state(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = da9155_get_charge_current(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| return -ENODATA; |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| switch (ext_psp) { |
| case POWER_SUPPLY_EXT_PROP_CHECK_SLAVE_I2C: |
| { |
| u8 reg_data; |
| val->intval = (da9155_read_reg(charger->i2c, DA9155_EVENT_B, ®_data) == 0); |
| } |
| break; |
| case POWER_SUPPLY_EXT_PROP_CHECK_MULTI_CHARGE: |
| val->intval = (da9155_get_charger_health(charger) == POWER_SUPPLY_HEALTH_GOOD) ? |
| da9155_get_charger_state(charger) : POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int da9155_chg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, const union power_supply_propval *val) |
| { |
| struct da9155_charger_data *charger = |
| power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| charger->is_charging = |
| (val->intval == SEC_BAT_CHG_MODE_CHARGING) ? ENABLE : DISABLE; |
| da9155_set_charger_state(charger, charger->is_charging); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| charger->charging_current = val->intval; |
| da9155_set_charge_current(charger, charger->charging_current); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| charger->siop_level = val->intval; |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| charger->cable_type = val->intval; |
| if (val->intval != SEC_BATTERY_CABLE_NONE) { |
| da9155_mode_change(charger, da9155_check_cable_type(charger->cable_type)); |
| charger->prev_cable_type = charger->cable_type; |
| da9155_charger_initialize(charger); |
| da9155_set_vindrop_vbatov(charger); |
| } else { |
| da9155_mode_change(charger, DISABLE); |
| charger->prev_cable_type = SEC_BATTERY_CABLE_NONE; |
| } |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| case POWER_SUPPLY_PROP_STATUS: |
| case POWER_SUPPLY_PROP_CURRENT_FULL: |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| case POWER_SUPPLY_PROP_HEALTH: |
| return -ENODATA; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int da9155_charger_parse_dt(struct da9155_charger_data *charger, |
| struct da9155_charger_platform_data *pdata) |
| { |
| struct device_node *np = of_find_node_by_name(NULL, "da9155-charger"); |
| int ret = 0; |
| |
| if (!np) { |
| pr_err("%s: np is NULL\n", __func__); |
| return -1; |
| } else { |
| ret = of_get_named_gpio_flags(np, "da9155-charger,irq-gpio", |
| 0, NULL); |
| if (ret < 0) { |
| pr_err("%s: da9155-charger,irq-gpio is empty\n", __func__); |
| pdata->irq_gpio = 0; |
| } else { |
| pdata->irq_gpio = ret; |
| pr_info("%s: irq-gpio = %d\n", __func__, pdata->irq_gpio); |
| } |
| } |
| np = of_find_node_by_name(NULL, "battery"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_u32(np, "battery,chg_float_voltage", |
| &charger->float_voltage); |
| if (ret) { |
| pr_info("%s: battery,chg_float_voltage is Empty\n", __func__); |
| charger->float_voltage = 42000; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static const struct power_supply_desc da9155_charger_power_supply_desc = { |
| .name = "da9155-charger", |
| .type = POWER_SUPPLY_TYPE_UNKNOWN, |
| .properties = da9155_charger_props, |
| .num_properties = ARRAY_SIZE(da9155_charger_props), |
| .get_property = da9155_chg_get_property, |
| .set_property = da9155_chg_set_property, |
| }; |
| |
| static int da9155_charger_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device_node *of_node = client->dev.of_node; |
| struct da9155_charger_data *charger; |
| struct da9155_charger_platform_data *pdata = client->dev.platform_data; |
| struct power_supply_config sub_charger_cfg = {}; |
| int ret = 0; |
| |
| pr_info("%s: DA9155 Charger Driver Loading\n", __func__); |
| |
| charger = kzalloc(sizeof(*charger), GFP_KERNEL); |
| if (!charger) { |
| pr_err("%s: Failed to allocate memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| mutex_init(&charger->io_lock); |
| charger->dev = &client->dev; |
| charger->i2c = client; |
| if (of_node) { |
| pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| pr_err("%s: Failed to allocate memory\n", __func__); |
| ret = -ENOMEM; |
| goto err_nomem; |
| } |
| ret = da9155_charger_parse_dt(charger, pdata); |
| if (ret < 0) |
| goto err_parse_dt; |
| } |
| charger->pdata = pdata; |
| i2c_set_clientdata(client, charger); |
| |
| /* da9155_charger_initialize(charger); */ |
| charger->cable_type = SEC_BATTERY_CABLE_NONE; |
| charger->prev_cable_type = SEC_BATTERY_CABLE_NONE; |
| sub_charger_cfg.drv_data = charger; |
| charger->psy_chg = power_supply_register(charger->dev, &da9155_charger_power_supply_desc, &sub_charger_cfg); |
| if (ret) { |
| pr_err("%s: Failed to Register psy_chg\n", __func__); |
| ret = -1; |
| goto err_power_supply_register; |
| } |
| |
| if (pdata->irq_gpio) { |
| charger->chg_irq = gpio_to_irq(pdata->irq_gpio); |
| |
| ret = request_threaded_irq(charger->chg_irq, NULL, |
| da9155_irq_handler, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "da9155-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: Failed to Request IRQ(%d)\n", __func__, ret); |
| goto err_req_irq; |
| } |
| } |
| device_init_wakeup(charger->dev, 1); |
| |
| pr_info("%s: DA9155 Charger Driver Loaded\n", __func__); |
| |
| return 0; |
| |
| err_req_irq: |
| power_supply_unregister(charger->psy_chg); |
| err_power_supply_register: |
| err_parse_dt: |
| kfree(pdata); |
| err_nomem: |
| mutex_destroy(&charger->io_lock); |
| kfree(charger); |
| |
| return ret; |
| } |
| |
| static int da9155_charger_remove(struct i2c_client *client) |
| { |
| struct da9155_charger_data *charger = i2c_get_clientdata(client); |
| |
| if (charger->chg_irq) |
| free_irq(charger->chg_irq, charger); |
| power_supply_unregister(charger->psy_chg); |
| mutex_destroy(&charger->io_lock); |
| kfree(charger->pdata); |
| kfree(charger); |
| |
| return 0; |
| } |
| |
| static void da9155_charger_shutdown(struct i2c_client *client) |
| { |
| struct da9155_charger_data *charger = i2c_get_clientdata(client); |
| |
| if (charger->chg_irq) |
| free_irq(charger->chg_irq, charger); |
| da9155_update_reg(client, DA9155_BUCK_CONT, 0, DA9155_BUCK_EN_MASK); |
| da9155_update_reg(client, DA9155_BUCK_IOUT, 0x7D, DA9155_BUCK_ILIM_MASK); |
| if (charger->cable_type != SEC_BATTERY_CABLE_NONE) |
| da9155_mode_change(charger, DISABLE); |
| } |
| |
| static const struct i2c_device_id da9155_charger_id_table[] = { |
| {"da9155-charger", 0}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, da9155_id_table); |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id da9155_charger_match_table[] = { |
| {.compatible = "dlg,da9155-charger"}, |
| {}, |
| }; |
| #else |
| #define da9155_charger_match_table NULL |
| #endif |
| |
| #if defined(CONFIG_PM) |
| static int da9155_charger_suspend(struct device *dev) |
| { |
| struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); |
| struct da9155_charger_data *charger = i2c_get_clientdata(i2c); |
| |
| if (charger->chg_irq) { |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(charger->chg_irq); |
| disable_irq(charger->chg_irq); |
| } |
| |
| return 0; |
| } |
| |
| static int da9155_charger_resume(struct device *dev) |
| { |
| struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); |
| struct da9155_charger_data *charger = i2c_get_clientdata(i2c); |
| |
| if (charger->chg_irq) { |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(charger->chg_irq); |
| enable_irq(charger->chg_irq); |
| } |
| |
| return 0; |
| } |
| #else |
| #define da9155_charger_suspend NULL |
| #define da9155_charger_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| const struct dev_pm_ops da9155_pm = { |
| .suspend = da9155_charger_suspend, |
| .resume = da9155_charger_resume, |
| }; |
| |
| static struct i2c_driver da9155_charger_driver = { |
| .driver = { |
| .name = "da9155-charger", |
| .owner = THIS_MODULE, |
| #if defined(CONFIG_PM) |
| .pm = &da9155_pm, |
| #endif /* CONFIG_PM */ |
| .of_match_table = da9155_charger_match_table, |
| }, |
| .probe = da9155_charger_probe, |
| .remove = da9155_charger_remove, |
| .shutdown = da9155_charger_shutdown, |
| .id_table = da9155_charger_id_table, |
| }; |
| |
| static int __init da9155_charger_init(void) |
| { |
| pr_info("%s: \n", __func__); |
| return i2c_add_driver(&da9155_charger_driver); |
| } |
| |
| static void __exit da9155_charger_exit(void) |
| { |
| pr_info("%s: \n", __func__); |
| i2c_del_driver(&da9155_charger_driver); |
| } |
| |
| module_init(da9155_charger_init); |
| module_exit(da9155_charger_exit); |
| |
| MODULE_DESCRIPTION("Samsung DA9155 Charger Driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |