| /* |
| * Q40 I/O port IDE Driver |
| * |
| * (c) Richard Zidlicky |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| * |
| * |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/ide.h> |
| |
| /* |
| * Bases of the IDE interfaces |
| */ |
| |
| #define Q40IDE_NUM_HWIFS 2 |
| |
| #define PCIDE_BASE1 0x1f0 |
| #define PCIDE_BASE2 0x170 |
| #define PCIDE_BASE3 0x1e8 |
| #define PCIDE_BASE4 0x168 |
| #define PCIDE_BASE5 0x1e0 |
| #define PCIDE_BASE6 0x160 |
| |
| static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = { |
| PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5, |
| PCIDE_BASE6 */ |
| }; |
| |
| static int q40ide_default_irq(unsigned long base) |
| { |
| switch (base) { |
| case 0x1f0: return 14; |
| case 0x170: return 15; |
| case 0x1e8: return 11; |
| default: |
| return 0; |
| } |
| } |
| |
| |
| /* |
| * Addresses are pretranslated for Q40 ISA access. |
| */ |
| static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, |
| ide_ack_intr_t *ack_intr, |
| int irq) |
| { |
| memset(hw, 0, sizeof(hw_regs_t)); |
| /* BIG FAT WARNING: |
| assumption: only DATA port is ever used in 16 bit mode */ |
| hw->io_ports.data_addr = Q40_ISA_IO_W(base); |
| hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1); |
| hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2); |
| hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3); |
| hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4); |
| hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5); |
| hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6); |
| hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7); |
| hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206); |
| |
| hw->irq = irq; |
| hw->ack_intr = ack_intr; |
| |
| hw->chipset = ide_generic; |
| } |
| |
| static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| unsigned long data_addr = drive->hwif->io_ports.data_addr; |
| |
| if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) |
| return insw(data_addr, buf, (len + 1) / 2); |
| |
| raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); |
| } |
| |
| static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| unsigned long data_addr = drive->hwif->io_ports.data_addr; |
| |
| if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) |
| return outsw(data_addr, buf, (len + 1) / 2); |
| |
| raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); |
| } |
| |
| /* Q40 has a byte-swapped IDE interface */ |
| static const struct ide_tp_ops q40ide_tp_ops = { |
| .exec_command = ide_exec_command, |
| .read_status = ide_read_status, |
| .read_altstatus = ide_read_altstatus, |
| |
| .set_irq = ide_set_irq, |
| |
| .tf_load = ide_tf_load, |
| .tf_read = ide_tf_read, |
| |
| .input_data = q40ide_input_data, |
| .output_data = q40ide_output_data, |
| }; |
| |
| static const struct ide_port_info q40ide_port_info = { |
| .tp_ops = &q40ide_tp_ops, |
| .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, |
| .irq_flags = IRQF_SHARED, |
| }; |
| |
| /* |
| * the static array is needed to have the name reported in /proc/ioports, |
| * hwif->name unfortunately isn't available yet |
| */ |
| static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ |
| "ide0", "ide1" |
| }; |
| |
| /* |
| * Probe for Q40 IDE interfaces |
| */ |
| |
| static int __init q40ide_init(void) |
| { |
| int i; |
| hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; |
| |
| if (!MACH_IS_Q40) |
| return -ENODEV; |
| |
| printk(KERN_INFO "ide: Q40 IDE controller\n"); |
| |
| for (i = 0; i < Q40IDE_NUM_HWIFS; i++) { |
| const char *name = q40_ide_names[i]; |
| |
| if (!request_region(pcide_bases[i], 8, name)) { |
| printk("could not reserve ports %lx-%lx for %s\n", |
| pcide_bases[i],pcide_bases[i]+8,name); |
| continue; |
| } |
| if (!request_region(pcide_bases[i]+0x206, 1, name)) { |
| printk("could not reserve port %lx for %s\n", |
| pcide_bases[i]+0x206,name); |
| release_region(pcide_bases[i], 8); |
| continue; |
| } |
| q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL, |
| q40ide_default_irq(pcide_bases[i])); |
| |
| hws[i] = &hw[i]; |
| } |
| |
| return ide_host_add(&q40ide_port_info, hws, NULL); |
| } |
| |
| module_init(q40ide_init); |
| |
| MODULE_LICENSE("GPL"); |