drivers/net/can/sja1000/plx_pci.c - LeafOS-Devices/android_kernel_samsung_universal7904 - Gitiles

 /*
  * Copyright (C) 2008-2010 Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
  *
  * Derived from the ems_pci.c driver:
  *	Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
  *	Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
  *	Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
  * as published by the Free Software Foundation
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/io.h>

 #include "sja1000.h"

 #define DRV_NAME  "sja1000_plx_pci"

 MODULE_AUTHOR("Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>");
 MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
 		   "the SJA1000 chips");
 MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
 			"Adlink PCI-7841/cPCI-7841 SE, "
 			"Marathon CAN-bus-PCI, "
 			"TEWS TECHNOLOGIES TPMC810");
 MODULE_LICENSE("GPL v2");

 #define PLX_PCI_MAX_CHAN 2

 struct plx_pci_card {
 	int channels;			/* detected channels count */
 	struct net_device *net_dev[PLX_PCI_MAX_CHAN];
 	void __iomem *conf_addr;
 };

 #define PLX_PCI_CAN_CLOCK (16000000 / 2)

 /* PLX90xx registers */
 #define PLX_INTCSR	0x4c		/* Interrupt Control/Status */
 #define PLX_CNTRL	0x50		/* User I/O, Direct Slave Response,
 					 * Serial EEPROM, and Initialization
 					 * Control register
 					 */

 #define PLX_LINT1_EN	0x1		/* Local interrupt 1 enable */
 #define PLX_LINT2_EN	(1 << 3)	/* Local interrupt 2 enable */
 #define PLX_PCI_INT_EN	(1 << 6)	/* PCI Interrupt Enable */
 #define PLX_PCI_RESET	(1 << 30)	/* PCI Adapter Software Reset */

 /*
  * The board configuration is probably following:
  * RX1 is connected to ground.
  * TX1 is not connected.
  * CLKO is not connected.
  * Setting the OCR register to 0xDA is a good idea.
  * This means normal output mode, push-pull and the correct polarity.
  */
 #define PLX_PCI_OCR	(OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)

 /*
  * In the CDR register, you should set CBP to 1.
  * You will probably also want to set the clock divider value to 7
  * (meaning direct oscillator output) because the second SJA1000 chip
  * is driven by the first one CLKOUT output.
  */
 #define PLX_PCI_CDR			(CDR_CBP | CDR_CLKOUT_MASK)

 /* SJA1000 Control Register in the BasicCAN Mode */
 #define REG_CR				0x00

 /* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/
 #define REG_CR_BASICCAN_INITIAL		0x21
 #define REG_CR_BASICCAN_INITIAL_MASK	0xa1
 #define REG_SR_BASICCAN_INITIAL		0x0c
 #define REG_IR_BASICCAN_INITIAL		0xe0

 /* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/
 #define REG_MOD_PELICAN_INITIAL		0x01
 #define REG_SR_PELICAN_INITIAL		0x3c
 #define REG_IR_PELICAN_INITIAL		0x00

 #define ADLINK_PCI_VENDOR_ID		0x144A
 #define ADLINK_PCI_DEVICE_ID		0x7841

 #define MARATHON_PCI_DEVICE_ID		0x2715

 #define TEWS_PCI_VENDOR_ID		0x1498
 #define TEWS_PCI_DEVICE_ID_TMPC810	0x032A

 static void plx_pci_reset_common(struct pci_dev *pdev);
 static void plx_pci_reset_marathon(struct pci_dev *pdev);

 struct plx_pci_channel_map {
 	u32 bar;
 	u32 offset;
 	u32 size;		/* 0x00 - auto, e.g. length of entire bar */
 };

 struct plx_pci_card_info {
 	const char *name;
 	int channel_count;
 	u32 can_clock;
 	u8 ocr;			/* output control register */
 	u8 cdr;			/* clock divider register */

 	/* Parameters for mapping local configuration space */
 	struct plx_pci_channel_map conf_map;

 	/* Parameters for mapping the SJA1000 chips */
 	struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN];

 	/* Pointer to device-dependent reset function */
 	void (*reset_func)(struct pci_dev *pdev);
 };

 static struct plx_pci_card_info plx_pci_card_info_adlink __devinitdata = {
 	"Adlink PCI-7841/cPCI-7841", 2,
 	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
 	{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
 	&plx_pci_reset_common
 	/* based on PLX9052 */
 };

 static struct plx_pci_card_info plx_pci_card_info_adlink_se __devinitdata = {
 	"Adlink PCI-7841/cPCI-7841 SE", 2,
 	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
 	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
 	&plx_pci_reset_common
 	/* based on PLX9052 */
 };

 static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = {
 	"Marathon CAN-bus-PCI", 2,
 	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
 	{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} },
 	&plx_pci_reset_marathon
 	/* based on PLX9052 */
 };

 static struct plx_pci_card_info plx_pci_card_info_tews __devinitdata = {
 	"TEWS TECHNOLOGIES TPMC810", 2,
 	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
 	{0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
 	&plx_pci_reset_common
 	/* based on PLX9030 */
 };

 static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
 	{
 		/* Adlink PCI-7841/cPCI-7841 */
 		ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_NETWORK_OTHER << 8, ~0,
 		(kernel_ulong_t)&plx_pci_card_info_adlink
 	},
 	{
 		/* Adlink PCI-7841/cPCI-7841 SE */
 		ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_COMMUNICATION_OTHER << 8, ~0,
 		(kernel_ulong_t)&plx_pci_card_info_adlink_se
 	},
 	{
 		/* Marathon CAN-bus-PCI card */
 		PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		(kernel_ulong_t)&plx_pci_card_info_marathon
 	},
 	{
 		/* TEWS TECHNOLOGIES TPMC810 card */
 		TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		(kernel_ulong_t)&plx_pci_card_info_tews
 	},
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, plx_pci_tbl);

 static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port)
 {
 	return ioread8(priv->reg_base + port);
 }

 static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
 {
 	iowrite8(val, priv->reg_base + port);
 }

 /*
  * Check if a CAN controller is present at the specified location
  * by trying to switch 'em from the Basic mode into the PeliCAN mode.
  * Also check states of some registers in reset mode.
  */
 static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
 {
 	int flag = 0;

 	/*
 	 * Check registers after hardware reset (the Basic mode)
 	 * See states on p. 10 of the Datasheet.
 	 */
 	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
 	    REG_CR_BASICCAN_INITIAL &&
 	    (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
 	    (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
 		flag = 1;

 	/* Bring the SJA1000 into the PeliCAN mode*/
 	priv->write_reg(priv, REG_CDR, CDR_PELICAN);

 	/*
 	 * Check registers after reset in the PeliCAN mode.
 	 * See states on p. 23 of the Datasheet.
 	 */
 	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
 	    priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
 	    priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
 		return flag;

 	return 0;
 }

 /*
  * PLX90xx software reset
  * Also LRESET# asserts and brings to reset device on the Local Bus (if wired).
  * For most cards it's enough for reset the SJA1000 chips.
  */
 static void plx_pci_reset_common(struct pci_dev *pdev)
 {
 	struct plx_pci_card *card = pci_get_drvdata(pdev);
 	u32 cntrl;

 	cntrl = ioread32(card->conf_addr + PLX_CNTRL);
 	cntrl |= PLX_PCI_RESET;
 	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
 	udelay(100);
 	cntrl ^= PLX_PCI_RESET;
 	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
 };

 /* Special reset function for Marathon card */
 static void plx_pci_reset_marathon(struct pci_dev *pdev)
 {
 	void __iomem *reset_addr;
 	int i;
 	int reset_bar[2] = {3, 5};

 	plx_pci_reset_common(pdev);

 	for (i = 0; i < 2; i++) {
 		reset_addr = pci_iomap(pdev, reset_bar[i], 0);
 		if (!reset_addr) {
 			dev_err(&pdev->dev, "Failed to remap reset "
 				"space %d (BAR%d)\n", i, reset_bar[i]);
 		} else {
 			/* reset the SJA1000 chip */
 			iowrite8(0x1, reset_addr);
 			udelay(100);
 			pci_iounmap(pdev, reset_addr);
 		}
 	}
 }

 static void plx_pci_del_card(struct pci_dev *pdev)
 {
 	struct plx_pci_card *card = pci_get_drvdata(pdev);
 	struct net_device *dev;
 	struct sja1000_priv *priv;
 	int i = 0;

 	for (i = 0; i < card->channels; i++) {
 		dev = card->net_dev[i];
 		if (!dev)
 			continue;

 		dev_info(&pdev->dev, "Removing %s\n", dev->name);
 		unregister_sja1000dev(dev);
 		priv = netdev_priv(dev);
 		if (priv->reg_base)
 			pci_iounmap(pdev, priv->reg_base);
 		free_sja1000dev(dev);
 	}

 	plx_pci_reset_common(pdev);

 	/*
 	 * Disable interrupts from PCI-card (PLX90xx) and disable Local_1,
 	 * Local_2 interrupts
 	 */
 	iowrite32(0x0, card->conf_addr + PLX_INTCSR);

 	if (card->conf_addr)
 		pci_iounmap(pdev, card->conf_addr);

 	kfree(card);

 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }

 /*
  * Probe PLX90xx based device for the SJA1000 chips and register each
  * available CAN channel to SJA1000 Socket-CAN subsystem.
  */
 static int __devinit plx_pci_add_card(struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
 	struct sja1000_priv *priv;
 	struct net_device *dev;
 	struct plx_pci_card *card;
 	struct plx_pci_card_info *ci;
 	int err, i;
 	u32 val;
 	void __iomem *addr;

 	ci = (struct plx_pci_card_info *)ent->driver_data;

 	if (pci_enable_device(pdev) < 0) {
 		dev_err(&pdev->dev, "Failed to enable PCI device\n");
 		return -ENODEV;
 	}

 	dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n",
 		 ci->name, PCI_SLOT(pdev->devfn));

 	/* Allocate card structures to hold addresses, ... */
 	card = kzalloc(sizeof(*card), GFP_KERNEL);
 	if (!card) {
 		dev_err(&pdev->dev, "Unable to allocate memory\n");
 		pci_disable_device(pdev);
 		return -ENOMEM;
 	}

 	pci_set_drvdata(pdev, card);

 	card->channels = 0;

 	/* Remap PLX90xx configuration space */
 	addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size);
 	if (!addr) {
 		err = -ENOMEM;
 		dev_err(&pdev->dev, "Failed to remap configuration space "
 			"(BAR%d)\n", ci->conf_map.bar);
 		goto failure_cleanup;
 	}
 	card->conf_addr = addr + ci->conf_map.offset;

 	ci->reset_func(pdev);

 	/* Detect available channels */
 	for (i = 0; i < ci->channel_count; i++) {
 		struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i];

 		dev = alloc_sja1000dev(0);
 		if (!dev) {
 			err = -ENOMEM;
 			goto failure_cleanup;
 		}

 		card->net_dev[i] = dev;
 		priv = netdev_priv(dev);
 		priv->priv = card;
 		priv->irq_flags = IRQF_SHARED;

 		dev->irq = pdev->irq;

 		/*
 		 * Remap IO space of the SJA1000 chips
 		 * This is device-dependent mapping
 		 */
 		addr = pci_iomap(pdev, cm->bar, cm->size);
 		if (!addr) {
 			err = -ENOMEM;
 			dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
 			goto failure_cleanup;
 		}

 		priv->reg_base = addr + cm->offset;
 		priv->read_reg = plx_pci_read_reg;
 		priv->write_reg = plx_pci_write_reg;

 		/* Check if channel is present */
 		if (plx_pci_check_sja1000(priv)) {
 			priv->can.clock.freq = ci->can_clock;
 			priv->ocr = ci->ocr;
 			priv->cdr = ci->cdr;

 			SET_NETDEV_DEV(dev, &pdev->dev);

 			/* Register SJA1000 device */
 			err = register_sja1000dev(dev);
 			if (err) {
 				dev_err(&pdev->dev, "Registering device failed "
 					"(err=%d)\n", err);
 				free_sja1000dev(dev);
 				goto failure_cleanup;
 			}

 			card->channels++;

 			dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d "
 				 "registered as %s\n", i + 1, priv->reg_base,
 				 dev->irq, dev->name);
 		} else {
 			dev_err(&pdev->dev, "Channel #%d not detected\n",
 				i + 1);
 			free_sja1000dev(dev);
 		}
 	}

 	if (!card->channels) {
 		err = -ENODEV;
 		goto failure_cleanup;
 	}

 	/*
 	 * Enable interrupts from PCI-card (PLX90xx) and enable Local_1,
 	 * Local_2 interrupts from the SJA1000 chips
 	 */
 	val = ioread32(card->conf_addr + PLX_INTCSR);
 	val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN;
 	iowrite32(val, card->conf_addr + PLX_INTCSR);

 	return 0;

 failure_cleanup:
 	dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);

 	plx_pci_del_card(pdev);

 	return err;
 }

 static struct pci_driver plx_pci_driver = {
 	.name = DRV_NAME,
 	.id_table = plx_pci_tbl,
 	.probe = plx_pci_add_card,
 	.remove = plx_pci_del_card,
 };

 static int __init plx_pci_init(void)
 {
 	return pci_register_driver(&plx_pci_driver);
 }

 static void __exit plx_pci_exit(void)
 {
 	pci_unregister_driver(&plx_pci_driver);
 }

 module_init(plx_pci_init);
 module_exit(plx_pci_exit);
	/*
	* Copyright (C) 2008-2010 Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
	*
	* Derived from the ems_pci.c driver:
	* Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
	* Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
	* Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the version 2 of the GNU General Public License
	* as published by the Free Software Foundation
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software Foundation,
	* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/interrupt.h>
	#include <linux/netdevice.h>
	#include <linux/delay.h>
	#include <linux/slab.h>
	#include <linux/pci.h>
	#include <linux/can.h>
	#include <linux/can/dev.h>
	#include <linux/io.h>

	#include "sja1000.h"

	#define DRV_NAME "sja1000_plx_pci"

	MODULE_AUTHOR("Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>");
	MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
	"the SJA1000 chips");
	MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
	"Adlink PCI-7841/cPCI-7841 SE, "
	"Marathon CAN-bus-PCI, "
	"TEWS TECHNOLOGIES TPMC810");
	MODULE_LICENSE("GPL v2");

	#define PLX_PCI_MAX_CHAN 2

	struct plx_pci_card {
	int channels; /* detected channels count */
	struct net_device *net_dev[PLX_PCI_MAX_CHAN];
	void __iomem *conf_addr;
	};

	#define PLX_PCI_CAN_CLOCK (16000000 / 2)

	/* PLX90xx registers */
	#define PLX_INTCSR 0x4c /* Interrupt Control/Status */
	#define PLX_CNTRL 0x50 /* User I/O, Direct Slave Response,
	* Serial EEPROM, and Initialization
	* Control register
	*/

	#define PLX_LINT1_EN 0x1 /* Local interrupt 1 enable */
	#define PLX_LINT2_EN (1 << 3) /* Local interrupt 2 enable */
	#define PLX_PCI_INT_EN (1 << 6) /* PCI Interrupt Enable */
	#define PLX_PCI_RESET (1 << 30) /* PCI Adapter Software Reset */

	/*
	* The board configuration is probably following:
	* RX1 is connected to ground.
	* TX1 is not connected.
	* CLKO is not connected.
	* Setting the OCR register to 0xDA is a good idea.
	* This means normal output mode, push-pull and the correct polarity.
	*/
	#define PLX_PCI_OCR (OCR_TX0_PUSHPULL \| OCR_TX1_PUSHPULL)

	/*
	* In the CDR register, you should set CBP to 1.
	* You will probably also want to set the clock divider value to 7
	* (meaning direct oscillator output) because the second SJA1000 chip
	* is driven by the first one CLKOUT output.
	*/
	#define PLX_PCI_CDR (CDR_CBP \| CDR_CLKOUT_MASK)

	/* SJA1000 Control Register in the BasicCAN Mode */
	#define REG_CR 0x00

	/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/
	#define REG_CR_BASICCAN_INITIAL 0x21
	#define REG_CR_BASICCAN_INITIAL_MASK 0xa1
	#define REG_SR_BASICCAN_INITIAL 0x0c
	#define REG_IR_BASICCAN_INITIAL 0xe0

	/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/
	#define REG_MOD_PELICAN_INITIAL 0x01
	#define REG_SR_PELICAN_INITIAL 0x3c
	#define REG_IR_PELICAN_INITIAL 0x00

	#define ADLINK_PCI_VENDOR_ID 0x144A
	#define ADLINK_PCI_DEVICE_ID 0x7841

	#define MARATHON_PCI_DEVICE_ID 0x2715

	#define TEWS_PCI_VENDOR_ID 0x1498
	#define TEWS_PCI_DEVICE_ID_TMPC810 0x032A

	static void plx_pci_reset_common(struct pci_dev *pdev);
	static void plx_pci_reset_marathon(struct pci_dev *pdev);

	struct plx_pci_channel_map {
	u32 bar;
	u32 offset;
	u32 size; /* 0x00 - auto, e.g. length of entire bar */
	};

	struct plx_pci_card_info {
	const char *name;
	int channel_count;
	u32 can_clock;
	u8 ocr; /* output control register */
	u8 cdr; /* clock divider register */

	/* Parameters for mapping local configuration space */
	struct plx_pci_channel_map conf_map;

	/* Parameters for mapping the SJA1000 chips */
	struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN];

	/* Pointer to device-dependent reset function */
	void (reset_func)(struct pci_dev pdev);
	};

	static struct plx_pci_card_info plx_pci_card_info_adlink __devinitdata = {
	"Adlink PCI-7841/cPCI-7841", 2,
	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
	{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
	&plx_pci_reset_common
	/* based on PLX9052 */
	};

	static struct plx_pci_card_info plx_pci_card_info_adlink_se __devinitdata = {
	"Adlink PCI-7841/cPCI-7841 SE", 2,
	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
	&plx_pci_reset_common
	/* based on PLX9052 */
	};

	static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = {
	"Marathon CAN-bus-PCI", 2,
	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
	{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} },
	&plx_pci_reset_marathon
	/* based on PLX9052 */
	};

	static struct plx_pci_card_info plx_pci_card_info_tews __devinitdata = {
	"TEWS TECHNOLOGIES TPMC810", 2,
	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
	{0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
	&plx_pci_reset_common
	/* based on PLX9030 */
	};

	static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
	{
	/* Adlink PCI-7841/cPCI-7841 */
	ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
	PCI_ANY_ID, PCI_ANY_ID,
	PCI_CLASS_NETWORK_OTHER << 8, ~0,
	(kernel_ulong_t)&plx_pci_card_info_adlink
	},
	{
	/* Adlink PCI-7841/cPCI-7841 SE */
	ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
	PCI_ANY_ID, PCI_ANY_ID,
	PCI_CLASS_COMMUNICATION_OTHER << 8, ~0,
	(kernel_ulong_t)&plx_pci_card_info_adlink_se
	},
	{
	/* Marathon CAN-bus-PCI card */
	PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID,
	PCI_ANY_ID, PCI_ANY_ID,
	0, 0,
	(kernel_ulong_t)&plx_pci_card_info_marathon
	},
	{
	/* TEWS TECHNOLOGIES TPMC810 card */
	TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810,
	PCI_ANY_ID, PCI_ANY_ID,
	0, 0,
	(kernel_ulong_t)&plx_pci_card_info_tews
	},
	{ 0,}
	};
	MODULE_DEVICE_TABLE(pci, plx_pci_tbl);

	static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port)
	{
	return ioread8(priv->reg_base + port);
	}

	static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
	{
	iowrite8(val, priv->reg_base + port);
	}

	/*
	* Check if a CAN controller is present at the specified location
	* by trying to switch 'em from the Basic mode into the PeliCAN mode.
	* Also check states of some registers in reset mode.
	*/
	static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
	{
	int flag = 0;

	/*
	* Check registers after hardware reset (the Basic mode)
	* See states on p. 10 of the Datasheet.
	*/
	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
	REG_CR_BASICCAN_INITIAL &&
	(priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
	(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
	flag = 1;

	/* Bring the SJA1000 into the PeliCAN mode*/
	priv->write_reg(priv, REG_CDR, CDR_PELICAN);

	/*
	* Check registers after reset in the PeliCAN mode.
	* See states on p. 23 of the Datasheet.
	*/
	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
	priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
	priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
	return flag;

	return 0;
	}

	/*
	* PLX90xx software reset
	* Also LRESET# asserts and brings to reset device on the Local Bus (if wired).
	* For most cards it's enough for reset the SJA1000 chips.
	*/
	static void plx_pci_reset_common(struct pci_dev *pdev)
	{
	struct plx_pci_card *card = pci_get_drvdata(pdev);
	u32 cntrl;

	cntrl = ioread32(card->conf_addr + PLX_CNTRL);
	cntrl \|= PLX_PCI_RESET;
	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
	udelay(100);
	cntrl ^= PLX_PCI_RESET;
	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
	};

	/* Special reset function for Marathon card */
	static void plx_pci_reset_marathon(struct pci_dev *pdev)
	{
	void __iomem *reset_addr;
	int i;
	int reset_bar[2] = {3, 5};

	plx_pci_reset_common(pdev);

	for (i = 0; i < 2; i++) {
	reset_addr = pci_iomap(pdev, reset_bar[i], 0);
	if (!reset_addr) {
	dev_err(&pdev->dev, "Failed to remap reset "
	"space %d (BAR%d)\n", i, reset_bar[i]);
	} else {
	/* reset the SJA1000 chip */
	iowrite8(0x1, reset_addr);
	udelay(100);
	pci_iounmap(pdev, reset_addr);
	}
	}
	}

	static void plx_pci_del_card(struct pci_dev *pdev)
	{
	struct plx_pci_card *card = pci_get_drvdata(pdev);
	struct net_device *dev;
	struct sja1000_priv *priv;
	int i = 0;

	for (i = 0; i < card->channels; i++) {
	dev = card->net_dev[i];
	if (!dev)
	continue;

	dev_info(&pdev->dev, "Removing %s\n", dev->name);
	unregister_sja1000dev(dev);
	priv = netdev_priv(dev);
	if (priv->reg_base)
	pci_iounmap(pdev, priv->reg_base);
	free_sja1000dev(dev);
	}

	plx_pci_reset_common(pdev);

	/*
	* Disable interrupts from PCI-card (PLX90xx) and disable Local_1,
	* Local_2 interrupts
	*/
	iowrite32(0x0, card->conf_addr + PLX_INTCSR);

	if (card->conf_addr)
	pci_iounmap(pdev, card->conf_addr);

	kfree(card);

	pci_disable_device(pdev);
	pci_set_drvdata(pdev, NULL);
	}

	/*
	* Probe PLX90xx based device for the SJA1000 chips and register each
	* available CAN channel to SJA1000 Socket-CAN subsystem.
	*/
	static int __devinit plx_pci_add_card(struct pci_dev *pdev,
	const struct pci_device_id *ent)
	{
	struct sja1000_priv *priv;
	struct net_device *dev;
	struct plx_pci_card *card;
	struct plx_pci_card_info *ci;
	int err, i;
	u32 val;
	void __iomem *addr;

	ci = (struct plx_pci_card_info *)ent->driver_data;

	if (pci_enable_device(pdev) < 0) {
	dev_err(&pdev->dev, "Failed to enable PCI device\n");
	return -ENODEV;
	}

	dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n",
	ci->name, PCI_SLOT(pdev->devfn));

	/* Allocate card structures to hold addresses, ... */
	card = kzalloc(sizeof(*card), GFP_KERNEL);
	if (!card) {
	dev_err(&pdev->dev, "Unable to allocate memory\n");
	pci_disable_device(pdev);
	return -ENOMEM;
	}

	pci_set_drvdata(pdev, card);

	card->channels = 0;

	/* Remap PLX90xx configuration space */
	addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size);
	if (!addr) {
	err = -ENOMEM;
	dev_err(&pdev->dev, "Failed to remap configuration space "
	"(BAR%d)\n", ci->conf_map.bar);
	goto failure_cleanup;
	}
	card->conf_addr = addr + ci->conf_map.offset;

	ci->reset_func(pdev);

	/* Detect available channels */
	for (i = 0; i < ci->channel_count; i++) {
	struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i];

	dev = alloc_sja1000dev(0);
	if (!dev) {
	err = -ENOMEM;
	goto failure_cleanup;
	}

	card->net_dev[i] = dev;
	priv = netdev_priv(dev);
	priv->priv = card;
	priv->irq_flags = IRQF_SHARED;

	dev->irq = pdev->irq;

	/*
	* Remap IO space of the SJA1000 chips
	* This is device-dependent mapping
	*/
	addr = pci_iomap(pdev, cm->bar, cm->size);
	if (!addr) {
	err = -ENOMEM;
	dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
	goto failure_cleanup;
	}

	priv->reg_base = addr + cm->offset;
	priv->read_reg = plx_pci_read_reg;
	priv->write_reg = plx_pci_write_reg;

	/* Check if channel is present */
	if (plx_pci_check_sja1000(priv)) {
	priv->can.clock.freq = ci->can_clock;
	priv->ocr = ci->ocr;
	priv->cdr = ci->cdr;

	SET_NETDEV_DEV(dev, &pdev->dev);

	/* Register SJA1000 device */
	err = register_sja1000dev(dev);
	if (err) {
	dev_err(&pdev->dev, "Registering device failed "
	"(err=%d)\n", err);
	free_sja1000dev(dev);
	goto failure_cleanup;
	}

	card->channels++;

	dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d "
	"registered as %s\n", i + 1, priv->reg_base,
	dev->irq, dev->name);
	} else {
	dev_err(&pdev->dev, "Channel #%d not detected\n",
	i + 1);
	free_sja1000dev(dev);
	}
	}

	if (!card->channels) {
	err = -ENODEV;
	goto failure_cleanup;
	}

	/*
	* Enable interrupts from PCI-card (PLX90xx) and enable Local_1,
	* Local_2 interrupts from the SJA1000 chips
	*/
	val = ioread32(card->conf_addr + PLX_INTCSR);
	val \|= PLX_LINT1_EN \| PLX_LINT2_EN \| PLX_PCI_INT_EN;
	iowrite32(val, card->conf_addr + PLX_INTCSR);

	return 0;

	failure_cleanup:
	dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);

	plx_pci_del_card(pdev);

	return err;
	}

	static struct pci_driver plx_pci_driver = {
	.name = DRV_NAME,
	.id_table = plx_pci_tbl,
	.probe = plx_pci_add_card,
	.remove = plx_pci_del_card,
	};

	static int __init plx_pci_init(void)
	{
	return pci_register_driver(&plx_pci_driver);
	}

	static void __exit plx_pci_exit(void)
	{
	pci_unregister_driver(&plx_pci_driver);
	}

	module_init(plx_pci_init);
	module_exit(plx_pci_exit);