blob: 2d51fce74a5ad17894d6e9661384f0aacdced2d1 [file] [log] [blame]
Willy Tarreau9b47a4f2012-12-09 19:40:04 +01001/dts-v1/;
2
Ezequiel Garcia0ab61292013-07-26 10:18:02 -03003#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
Willy Tarreau9b47a4f2012-12-09 19:40:04 +01005
6/ {
7 model = "Globalscale Technologies Guruplug Server Plus";
8 compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x20000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 };
18
19 ocp@f1000000 {
20 pinctrl: pinctrl@10000 {
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010021 pmx_led_health_r: pmx-led-health-r {
22 marvell,pins = "mpp46";
23 marvell,function = "gpio";
24 };
25 pmx_led_health_g: pmx-led-health-g {
26 marvell,pins = "mpp47";
27 marvell,function = "gpio";
28 };
29 pmx_led_wmode_r: pmx-led-wmode-r {
30 marvell,pins = "mpp48";
31 marvell,function = "gpio";
32 };
33 pmx_led_wmode_g: pmx-led-wmode-g {
34 marvell,pins = "mpp49";
35 marvell,function = "gpio";
36 };
37 };
38 serial@12000 {
39 clock-frequency = <200000000>;
40 status = "ok";
41 };
42
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010043 sata@80000 {
44 status = "okay";
45 nr-ports = <1>;
46 };
Sebastian Hesselbarthc52b95c2013-03-23 13:58:09 +010047
Sebastian Hesselbarth0932f142013-11-15 15:20:25 +010048 /* AzureWave AW-GH381 WiFi/BT */
Sebastian Hesselbarthc52b95c2013-03-23 13:58:09 +010049 mvsdio@90000 {
50 status = "okay";
Sebastian Hesselbarth0932f142013-11-15 15:20:25 +010051 non-removable;
Sebastian Hesselbarthc52b95c2013-03-23 13:58:09 +010052 };
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010053 };
54
55 gpio-leds {
56 compatible = "gpio-leds";
Thomas Petazzonid1424322013-05-24 11:44:43 +020057 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
58 &pmx_led_wmode_r &pmx_led_wmode_g >;
59 pinctrl-names = "default";
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010060
61 health-r {
62 label = "guruplug:red:health";
Andrew Lunn3a31f2d72013-12-04 16:51:39 +010063 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010064 };
65 health-g {
66 label = "guruplug:green:health";
Andrew Lunn3a31f2d72013-12-04 16:51:39 +010067 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010068 };
69 wmode-r {
70 label = "guruplug:red:wmode";
Andrew Lunn3a31f2d72013-12-04 16:51:39 +010071 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010072 };
73 wmode-g {
74 label = "guruplug:green:wmode";
Andrew Lunn3a31f2d72013-12-04 16:51:39 +010075 gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
Willy Tarreau9b47a4f2012-12-09 19:40:04 +010076 };
77 };
78};
Sebastian Hesselbarth876e2332013-07-07 22:34:56 +020079
Jason Gunthorpe7045ff52013-09-17 12:44:33 -060080&nand {
81 status = "okay";
82
83 partition@0 {
84 label = "u-boot";
85 reg = <0x00000000 0x00100000>;
86 read-only;
87 };
88
89 partition@100000 {
90 label = "uImage";
91 reg = <0x00100000 0x00400000>;
92 };
93
94 partition@500000 {
95 label = "data";
96 reg = <0x00500000 0x1fb00000>;
97 };
98};
99
Sebastian Hesselbarth876e2332013-07-07 22:34:56 +0200100&mdio {
101 status = "okay";
102
103 ethphy0: ethernet-phy@0 {
Sebastian Hesselbarth876e2332013-07-07 22:34:56 +0200104 compatible = "marvell,88e1121";
105 reg = <0>;
106 };
107
108 ethphy1: ethernet-phy@1 {
Sebastian Hesselbarth876e2332013-07-07 22:34:56 +0200109 compatible = "marvell,88e1121";
110 reg = <1>;
111 };
112};
113
114&eth0 {
115 status = "okay";
116 ethernet0-port@0 {
117 phy-handle = <&ethphy0>;
118 };
119};
120
121&eth1 {
122 status = "okay";
123 ethernet1-port@0 {
124 phy-handle = <&ethphy1>;
125 };
126};