blob: e7fd0b08e0b7fe6a0ef4c1e26665a3aba70ef8de [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef _MXSER_H
2#define _MXSER_H
3
4/*
5 * Semi-public control interfaces
6 */
7
8/*
9 * MOXA ioctls
10 */
11
12#define MOXA 0x400
13#define MOXA_GETDATACOUNT (MOXA + 23)
14#define MOXA_GET_CONF (MOXA + 35)
15#define MOXA_DIAGNOSE (MOXA + 50)
16#define MOXA_CHKPORTENABLE (MOXA + 60)
17#define MOXA_HighSpeedOn (MOXA + 61)
18#define MOXA_GET_MAJOR (MOXA + 63)
19#define MOXA_GET_CUMAJOR (MOXA + 64)
20#define MOXA_GETMSTATUS (MOXA + 65)
21#define MOXA_SET_OP_MODE (MOXA + 66)
22#define MOXA_GET_OP_MODE (MOXA + 67)
23
24#define RS232_MODE 0
25#define RS485_2WIRE_MODE 1
26#define RS422_MODE 2
27#define RS485_4WIRE_MODE 3
28#define OP_MODE_MASK 3
29// above add by Victor Yu. 01-05-2004
30
31#define TTY_THRESHOLD_THROTTLE 128
32
33#define LO_WATER (TTY_FLIPBUF_SIZE)
34#define HI_WATER (TTY_FLIPBUF_SIZE*2*3/4)
35
36// added by James. 03-11-2004.
37#define MOXA_SDS_GETICOUNTER (MOXA + 68)
38#define MOXA_SDS_RSTICOUNTER (MOXA + 69)
39// (above) added by James.
40
41#define MOXA_ASPP_OQUEUE (MOXA + 70)
42#define MOXA_ASPP_SETBAUD (MOXA + 71)
43#define MOXA_ASPP_GETBAUD (MOXA + 72)
44#define MOXA_ASPP_MON (MOXA + 73)
45#define MOXA_ASPP_LSTATUS (MOXA + 74)
46#define MOXA_ASPP_MON_EXT (MOXA + 75)
47#define MOXA_SET_BAUD_METHOD (MOXA + 76)
48
49
50/* --------------------------------------------------- */
51
52#define NPPI_NOTIFY_PARITY 0x01
53#define NPPI_NOTIFY_FRAMING 0x02
54#define NPPI_NOTIFY_HW_OVERRUN 0x04
55#define NPPI_NOTIFY_SW_OVERRUN 0x08
56#define NPPI_NOTIFY_BREAK 0x10
57
58#define NPPI_NOTIFY_CTSHOLD 0x01 // Tx hold by CTS low
59#define NPPI_NOTIFY_DSRHOLD 0x02 // Tx hold by DSR low
60#define NPPI_NOTIFY_XOFFHOLD 0x08 // Tx hold by Xoff received
61#define NPPI_NOTIFY_XOFFXENT 0x10 // Xoff Sent
62
63//CheckIsMoxaMust return value
64#define MOXA_OTHER_UART 0x00
65#define MOXA_MUST_MU150_HWID 0x01
66#define MOXA_MUST_MU860_HWID 0x02
67
68// follow just for Moxa Must chip define.
69//
70// when LCR register (offset 0x03) write following value,
71// the Must chip will enter enchance mode. And write value
72// on EFR (offset 0x02) bit 6,7 to change bank.
73#define MOXA_MUST_ENTER_ENCHANCE 0xBF
74
75// when enhance mode enable, access on general bank register
76#define MOXA_MUST_GDL_REGISTER 0x07
77#define MOXA_MUST_GDL_MASK 0x7F
78#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80
79
80#define MOXA_MUST_LSR_RERR 0x80 // error in receive FIFO
81// enchance register bank select and enchance mode setting register
82// when LCR register equal to 0xBF
83#define MOXA_MUST_EFR_REGISTER 0x02
84// enchance mode enable
85#define MOXA_MUST_EFR_EFRB_ENABLE 0x10
86// enchance reister bank set 0, 1, 2
87#define MOXA_MUST_EFR_BANK0 0x00
88#define MOXA_MUST_EFR_BANK1 0x40
89#define MOXA_MUST_EFR_BANK2 0x80
90#define MOXA_MUST_EFR_BANK3 0xC0
91#define MOXA_MUST_EFR_BANK_MASK 0xC0
92
93// set XON1 value register, when LCR=0xBF and change to bank0
94#define MOXA_MUST_XON1_REGISTER 0x04
95
96// set XON2 value register, when LCR=0xBF and change to bank0
97#define MOXA_MUST_XON2_REGISTER 0x05
98
99// set XOFF1 value register, when LCR=0xBF and change to bank0
100#define MOXA_MUST_XOFF1_REGISTER 0x06
101
102// set XOFF2 value register, when LCR=0xBF and change to bank0
103#define MOXA_MUST_XOFF2_REGISTER 0x07
104
105#define MOXA_MUST_RBRTL_REGISTER 0x04
106#define MOXA_MUST_RBRTH_REGISTER 0x05
107#define MOXA_MUST_RBRTI_REGISTER 0x06
108#define MOXA_MUST_THRTL_REGISTER 0x07
109#define MOXA_MUST_ENUM_REGISTER 0x04
110#define MOXA_MUST_HWID_REGISTER 0x05
111#define MOXA_MUST_ECR_REGISTER 0x06
112#define MOXA_MUST_CSR_REGISTER 0x07
113
114// good data mode enable
115#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20
116// only good data put into RxFIFO
117#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10
118
119// enable CTS interrupt
120#define MOXA_MUST_IER_ECTSI 0x80
121// eanble RTS interrupt
122#define MOXA_MUST_IER_ERTSI 0x40
123// enable Xon/Xoff interrupt
124#define MOXA_MUST_IER_XINT 0x20
125// enable GDA interrupt
126#define MOXA_MUST_IER_EGDAI 0x10
127
128#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
129
130// GDA interrupt pending
131#define MOXA_MUST_IIR_GDA 0x1C
132#define MOXA_MUST_IIR_RDA 0x04
133#define MOXA_MUST_IIR_RTO 0x0C
134#define MOXA_MUST_IIR_LSR 0x06
135
136// recieved Xon/Xoff or specical interrupt pending
137#define MOXA_MUST_IIR_XSC 0x10
138
139// RTS/CTS change state interrupt pending
140#define MOXA_MUST_IIR_RTSCTS 0x20
141#define MOXA_MUST_IIR_MASK 0x3E
142
143#define MOXA_MUST_MCR_XON_FLAG 0x40
144#define MOXA_MUST_MCR_XON_ANY 0x80
145#define MOXA_MUST_MCR_TX_XON 0x08
146
147
148// software flow control on chip mask value
149#define MOXA_MUST_EFR_SF_MASK 0x0F
150// send Xon1/Xoff1
151#define MOXA_MUST_EFR_SF_TX1 0x08
152// send Xon2/Xoff2
153#define MOXA_MUST_EFR_SF_TX2 0x04
154// send Xon1,Xon2/Xoff1,Xoff2
155#define MOXA_MUST_EFR_SF_TX12 0x0C
156// don't send Xon/Xoff
157#define MOXA_MUST_EFR_SF_TX_NO 0x00
158// Tx software flow control mask
159#define MOXA_MUST_EFR_SF_TX_MASK 0x0C
160// don't receive Xon/Xoff
161#define MOXA_MUST_EFR_SF_RX_NO 0x00
162// receive Xon1/Xoff1
163#define MOXA_MUST_EFR_SF_RX1 0x02
164// receive Xon2/Xoff2
165#define MOXA_MUST_EFR_SF_RX2 0x01
166// receive Xon1,Xon2/Xoff1,Xoff2
167#define MOXA_MUST_EFR_SF_RX12 0x03
168// Rx software flow control mask
169#define MOXA_MUST_EFR_SF_RX_MASK 0x03
170
171//#define MOXA_MUST_MIN_XOFFLIMIT 66
172//#define MOXA_MUST_MIN_XONLIMIT 20
173//#define ID1_RX_TRIG 120
174
175
176#define CHECK_MOXA_MUST_XOFFLIMIT(info) { \
177 if ( (info)->IsMoxaMustChipFlag && \
178 (info)->HandFlow.XoffLimit < MOXA_MUST_MIN_XOFFLIMIT ) { \
179 (info)->HandFlow.XoffLimit = MOXA_MUST_MIN_XOFFLIMIT; \
180 (info)->HandFlow.XonLimit = MOXA_MUST_MIN_XONLIMIT; \
181 } \
182}
183
184#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
185 u8 __oldlcr, __efr; \
186 __oldlcr = inb((baseio)+UART_LCR); \
187 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
188 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
189 __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \
190 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
191 outb(__oldlcr, (baseio)+UART_LCR); \
192}
193
194#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
195 u8 __oldlcr, __efr; \
196 __oldlcr = inb((baseio)+UART_LCR); \
197 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
198 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
199 __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \
200 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
201 outb(__oldlcr, (baseio)+UART_LCR); \
202}
203
204#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) { \
205 u8 __oldlcr, __efr; \
206 __oldlcr = inb((baseio)+UART_LCR); \
207 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
208 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
209 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
210 __efr |= MOXA_MUST_EFR_BANK0; \
211 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
212 outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \
213 outb(__oldlcr, (baseio)+UART_LCR); \
214}
215
216#define SET_MOXA_MUST_XON2_VALUE(baseio, Value) { \
217 u8 __oldlcr, __efr; \
218 __oldlcr = inb((baseio)+UART_LCR); \
219 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
220 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
221 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
222 __efr |= MOXA_MUST_EFR_BANK0; \
223 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
224 outb((u8)(Value), (baseio)+MOXA_MUST_XON2_REGISTER); \
225 outb(__oldlcr, (baseio)+UART_LCR); \
226}
227
228#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) { \
229 u8 __oldlcr, __efr; \
230 __oldlcr = inb((baseio)+UART_LCR); \
231 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
232 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
233 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
234 __efr |= MOXA_MUST_EFR_BANK0; \
235 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
236 outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \
237 outb(__oldlcr, (baseio)+UART_LCR); \
238}
239
240#define SET_MOXA_MUST_XOFF2_VALUE(baseio, Value) { \
241 u8 __oldlcr, __efr; \
242 __oldlcr = inb((baseio)+UART_LCR); \
243 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
244 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
245 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
246 __efr |= MOXA_MUST_EFR_BANK0; \
247 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
248 outb((u8)(Value), (baseio)+MOXA_MUST_XOFF2_REGISTER); \
249 outb(__oldlcr, (baseio)+UART_LCR); \
250}
251
252#define SET_MOXA_MUST_RBRTL_VALUE(baseio, Value) { \
253 u8 __oldlcr, __efr; \
254 __oldlcr = inb((baseio)+UART_LCR); \
255 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
256 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
257 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
258 __efr |= MOXA_MUST_EFR_BANK1; \
259 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
260 outb((u8)(Value), (baseio)+MOXA_MUST_RBRTL_REGISTER); \
261 outb(__oldlcr, (baseio)+UART_LCR); \
262}
263
264#define SET_MOXA_MUST_RBRTH_VALUE(baseio, Value) { \
265 u8 __oldlcr, __efr; \
266 __oldlcr = inb((baseio)+UART_LCR); \
267 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
268 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
269 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
270 __efr |= MOXA_MUST_EFR_BANK1; \
271 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
272 outb((u8)(Value), (baseio)+MOXA_MUST_RBRTH_REGISTER); \
273 outb(__oldlcr, (baseio)+UART_LCR); \
274}
275
276#define SET_MOXA_MUST_RBRTI_VALUE(baseio, Value) { \
277 u8 __oldlcr, __efr; \
278 __oldlcr = inb((baseio)+UART_LCR); \
279 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
280 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
281 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
282 __efr |= MOXA_MUST_EFR_BANK1; \
283 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
284 outb((u8)(Value), (baseio)+MOXA_MUST_RBRTI_REGISTER); \
285 outb(__oldlcr, (baseio)+UART_LCR); \
286}
287
288#define SET_MOXA_MUST_THRTL_VALUE(baseio, Value) { \
289 u8 __oldlcr, __efr; \
290 __oldlcr = inb((baseio)+UART_LCR); \
291 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
292 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
293 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
294 __efr |= MOXA_MUST_EFR_BANK1; \
295 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
296 outb((u8)(Value), (baseio)+MOXA_MUST_THRTL_REGISTER); \
297 outb(__oldlcr, (baseio)+UART_LCR); \
298}
299
300//#define MOXA_MUST_RBRL_VALUE 4
301#define SET_MOXA_MUST_FIFO_VALUE(info) { \
302 u8 __oldlcr, __efr; \
303 __oldlcr = inb((info)->base+UART_LCR); \
304 outb(MOXA_MUST_ENTER_ENCHANCE, (info)->base+UART_LCR); \
305 __efr = inb((info)->base+MOXA_MUST_EFR_REGISTER); \
306 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
307 __efr |= MOXA_MUST_EFR_BANK1; \
308 outb(__efr, (info)->base+MOXA_MUST_EFR_REGISTER); \
309 outb((u8)((info)->rx_high_water), (info)->base+MOXA_MUST_RBRTH_REGISTER); \
310 outb((u8)((info)->rx_trigger), (info)->base+MOXA_MUST_RBRTI_REGISTER); \
311 outb((u8)((info)->rx_low_water), (info)->base+MOXA_MUST_RBRTL_REGISTER); \
312 outb(__oldlcr, (info)->base+UART_LCR); \
313}
314
315
316
317#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) { \
318 u8 __oldlcr, __efr; \
319 __oldlcr = inb((baseio)+UART_LCR); \
320 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
321 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
322 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
323 __efr |= MOXA_MUST_EFR_BANK2; \
324 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
325 outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \
326 outb(__oldlcr, (baseio)+UART_LCR); \
327}
328
329#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) { \
330 u8 __oldlcr, __efr; \
331 __oldlcr = inb((baseio)+UART_LCR); \
332 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
333 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
334 __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
335 __efr |= MOXA_MUST_EFR_BANK2; \
336 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
337 *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \
338 outb(__oldlcr, (baseio)+UART_LCR); \
339}
340
341#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) { \
342 u8 __oldlcr, __efr; \
343 __oldlcr = inb((baseio)+UART_LCR); \
344 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
345 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
346 __efr &= ~MOXA_MUST_EFR_SF_MASK; \
347 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
348 outb(__oldlcr, (baseio)+UART_LCR); \
349}
350
351#define SET_MOXA_MUST_JUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
352 u8 __oldlcr, __efr; \
353 __oldlcr = inb((baseio)+UART_LCR); \
354 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
355 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
356 __efr &= ~MOXA_MUST_EFR_SF_MASK; \
357 __efr |= MOXA_MUST_EFR_SF_TX1; \
358 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
359 outb(__oldlcr, (baseio)+UART_LCR); \
360}
361
362#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
363 u8 __oldlcr, __efr; \
364 __oldlcr = inb((baseio)+UART_LCR); \
365 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
366 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
367 __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
368 __efr |= MOXA_MUST_EFR_SF_TX1; \
369 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
370 outb(__oldlcr, (baseio)+UART_LCR); \
371}
372
373#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
374 u8 __oldlcr, __efr; \
375 __oldlcr = inb((baseio)+UART_LCR); \
376 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
377 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
378 __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
379 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
380 outb(__oldlcr, (baseio)+UART_LCR); \
381}
382
383#define SET_MOXA_MUST_JUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
384 u8 __oldlcr, __efr; \
385 __oldlcr = inb((baseio)+UART_LCR); \
386 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
387 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
388 __efr &= ~MOXA_MUST_EFR_SF_MASK; \
389 __efr |= MOXA_MUST_EFR_SF_RX1; \
390 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
391 outb(__oldlcr, (baseio)+UART_LCR); \
392}
393
394#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
395 u8 __oldlcr, __efr; \
396 __oldlcr = inb((baseio)+UART_LCR); \
397 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
398 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
399 __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
400 __efr |= MOXA_MUST_EFR_SF_RX1; \
401 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
402 outb(__oldlcr, (baseio)+UART_LCR); \
403}
404
405#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
406 u8 __oldlcr, __efr; \
407 __oldlcr = inb((baseio)+UART_LCR); \
408 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
409 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
410 __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
411 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
412 outb(__oldlcr, (baseio)+UART_LCR); \
413}
414
415#define ENABLE_MOXA_MUST_TX_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
416 u8 __oldlcr, __efr; \
417 __oldlcr = inb((baseio)+UART_LCR); \
418 outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
419 __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
420 __efr &= ~MOXA_MUST_EFR_SF_MASK; \
421 __efr |= (MOXA_MUST_EFR_SF_RX1|MOXA_MUST_EFR_SF_TX1); \
422 outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
423 outb(__oldlcr, (baseio)+UART_LCR); \
424}
425
426#define ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
427 u8 __oldmcr; \
428 __oldmcr = inb((baseio)+UART_MCR); \
429 __oldmcr |= MOXA_MUST_MCR_XON_ANY; \
430 outb(__oldmcr, (baseio)+UART_MCR); \
431}
432
433#define DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
434 u8 __oldmcr; \
435 __oldmcr = inb((baseio)+UART_MCR); \
436 __oldmcr &= ~MOXA_MUST_MCR_XON_ANY; \
437 outb(__oldmcr, (baseio)+UART_MCR); \
438}
439
440#define READ_MOXA_MUST_GDL(baseio) inb((baseio)+MOXA_MUST_GDL_REGISTER)
441
442
443#ifndef INIT_WORK
444#define INIT_WORK(_work, _func, _data){ \
445 _data->tqueue.routine = _func;\
446 _data->tqueue.data = _data;\
447 }
448#endif
449
450#endif