blob: c952cd37cf6dd3775dda54dad9401518455cc0cb [file] [log] [blame]
Zhicheng Fan95074002012-02-10 14:48:16 +08001/*
2 * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2012 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x1000000>;
41 bank-width = <2>;
42 device-width = <1>;
43
44 partition@0 {
45 /* This location must not be altered */
46 /* 256KB for Vitesse 7385 Switch firmware */
47 reg = <0x0 0x00040000>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
50 };
51
52 partition@40000 {
53 /* 256KB for DTB Image */
54 reg = <0x00040000 0x00040000>;
55 label = "NOR DTB Image";
56 };
57
58 partition@80000 {
59 /* 3.5 MB for Linux Kernel Image */
60 reg = <0x00080000 0x00380000>;
61 label = "NOR Linux Kernel Image";
62 };
63
64 partition@400000 {
65 /* 11MB for JFFS2 based Root file System */
66 reg = <0x00400000 0x00b00000>;
67 label = "NOR JFFS2 Root File System";
68 };
69
70 partition@f00000 {
71 /* This location must not be altered */
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
74 reg = <0x00f00000 0x00100000>;
75 label = "NOR U-Boot Image";
76 read-only;
77 };
78 };
79
80 nand@1,0 {
81 #address-cells = <1>;
82 #size-cells = <1>;
83 compatible = "fsl,p1020-fcm-nand",
84 "fsl,elbc-fcm-nand";
85 reg = <0x1 0x0 0x40000>;
86
87 partition@0 {
88 /* This location must not be altered */
89 /* 1MB for u-boot Bootloader Image */
90 reg = <0x0 0x00100000>;
91 label = "NAND U-Boot Image";
92 read-only;
93 };
94
95 partition@100000 {
96 /* 1MB for DTB Image */
97 reg = <0x00100000 0x00100000>;
98 label = "NAND DTB Image";
99 };
100
101 partition@200000 {
102 /* 4MB for Linux Kernel Image */
103 reg = <0x00200000 0x00400000>;
104 label = "NAND Linux Kernel Image";
105 };
106
107 partition@600000 {
108 /* 4MB for Compressed Root file System Image */
109 reg = <0x00600000 0x00400000>;
110 label = "NAND Compressed RFS Image";
111 };
112
113 partition@a00000 {
114 /* 7MB for JFFS2 based Root file System */
115 reg = <0x00a00000 0x00700000>;
116 label = "NAND JFFS2 Root File System";
117 };
118
119 partition@1100000 {
120 /* 15MB for JFFS2 based Root file System */
121 reg = <0x01100000 0x00f00000>;
122 label = "NAND Writable User area";
123 };
124 };
125
126 L2switch@2,0 {
127 #address-cells = <1>;
128 #size-cells = <1>;
129 compatible = "vitesse-7385";
130 reg = <0x2 0x0 0x20000>;
131 };
132
133 cpld@3,0 {
134 #address-cells = <1>;
135 #size-cells = <1>;
136 compatible = "cpld";
137 reg = <0x3 0x0 0x20000>;
138 read-only;
139 };
140};
141
142&soc {
143 i2c@3000 {
144 rtc@68 {
145 compatible = "pericom,pt7c4338";
146 reg = <0x68>;
147 };
148 };
149
150 spi@7000 {
151 flash@0 {
152 #address-cells = <1>;
153 #size-cells = <1>;
154 compatible = "spansion,s25sl12801";
155 reg = <0>;
156 spi-max-frequency = <40000000>; /* input clock */
157
158 partition@u-boot {
159 /* 512KB for u-boot Bootloader Image */
160 reg = <0x0 0x00080000>;
161 label = "u-boot";
162 read-only;
163 };
164
165 partition@dtb {
166 /* 512KB for DTB Image*/
167 reg = <0x00080000 0x00080000>;
168 label = "dtb";
169 };
170
171 partition@kernel {
172 /* 4MB for Linux Kernel Image */
173 reg = <0x00100000 0x00400000>;
174 label = "kernel";
175 };
176
177 partition@fs {
178 /* 4MB for Compressed RFS Image */
179 reg = <0x00500000 0x00400000>;
180 label = "file system";
181 };
182
183 partition@jffs-fs {
184 /* 7MB for JFFS2 based RFS */
185 reg = <0x00900000 0x00700000>;
186 label = "file system jffs2";
187 };
188 };
189 };
190
191 usb@22000 {
192 phy_type = "ulpi";
193 };
194
195 /* USB2 is shared with localbus, so it must be disabled
196 by default. We can't put 'status = "disabled";' here
197 since U-Boot doesn't clear the status property when
198 it enables USB2. OTOH, U-Boot does create a new node
199 when there isn't any. So, just comment it out.
200 usb@23000 {
201 phy_type = "ulpi";
202 };
203 */
204
205 mdio@24000 {
206 phy0: ethernet-phy@0 {
207 interrupt-parent = <&mpic>;
208 interrupts = <3 1>;
209 reg = <0x0>;
210 };
211
212 phy1: ethernet-phy@1 {
213 interrupt-parent = <&mpic>;
214 interrupts = <2 1>;
215 reg = <0x1>;
216 };
217
218 tbi0: tbi-phy@11 {
219 device_type = "tbi-phy";
220 reg = <0x11>;
221 };
222 };
223
224 mdio@25000 {
225 tbi1: tbi-phy@11 {
226 reg = <0x11>;
227 device_type = "tbi-phy";
228 };
229 };
230
231 enet0: ethernet@b0000 {
232 fixed-link = <1 1 1000 0 0>;
233 phy-connection-type = "rgmii-id";
234
235 };
236
237 enet1: ethernet@b1000 {
238 phy-handle = <&phy0>;
239 tbi-handle = <&tbi1>;
240 phy-connection-type = "sgmii";
241 };
242
243 enet2: ethernet@b2000 {
244 phy-handle = <&phy1>;
245 phy-connection-type = "rgmii-id";
246 };
247};