blob: fa968aa99d67b4273792cfd35f36804da84235ac [file] [log] [blame]
Ben Dooksdfff4e92009-07-30 23:23:41 +01001 S3C24XX CPUfreq support
2 =======================
3
4Introduction
5------------
6
7 The S3C24XX series support a number of power saving systems, such as
8 the ability to change the core, memory and peripheral operating
9 frequencies. The core control is exported via the CPUFreq driver
10 which has a number of different manual or automatic controls over the
11 rate the core is running at.
12
13 There are two forms of the driver depending on the specific CPU and
14 how the clocks are arranged. The first implementation used as single
15 PLL to feed the ARM, memory and peripherals via a series of dividers
16 and muxes and this is the implementation that is documented here. A
Daniel Mack3ad2f3f2010-02-03 08:01:28 +080017 newer version where there is a separate PLL and clock divider for the
18 ARM core is available as a separate driver.
Ben Dooksdfff4e92009-07-30 23:23:41 +010019
20
21Layout
22------
23
24 The code core manages the CPU specific drivers, any data that they
25 need to register and the interface to the generic drivers/cpufreq
26 system. Each CPU registers a driver to control the PLL, clock dividers
27 and anything else associated with it. Any board that wants to use this
28 framework needs to supply at least basic details of what is required.
29
30 The core registers with drivers/cpufreq at init time if all the data
31 necessary has been supplied.
32
33
34CPU support
35-----------
36
37 The support for each CPU depends on the facilities provided by the
38 SoC and the driver as each device has different PLL and clock chains
39 associated with it.
40
41
42Slow Mode
43---------
44
45 The SLOW mode where the PLL is turned off altogether and the
46 system is fed by the external crystal input is currently not
47 supported.
48
49
50sysfs
51-----
52
53 The core code exports extra information via sysfs in the directory
54 devices/system/cpu/cpu0/arch-freq.
55
56
57Board Support
58-------------
59
60 Each board that wants to use the cpufreq code must register some basic
61 information with the core driver to provide information about what the
62 board requires and any restrictions being placed on it.
63
64 The board needs to supply information about whether it needs the IO bank
65 timings changing, any maximum frequency limits and information about the
66 SDRAM refresh rate.
67
68
69
70
71Document Author
72---------------
73
74Ben Dooks, Copyright 2009 Simtec Electronics
75Licensed under GPLv2