| /* |
| * linux/net/sunrpc/xprtsock.c |
| * |
| * Client-side transport implementation for sockets. |
| * |
| * TCP callback races fixes (C) 1998 Red Hat Software <alan@redhat.com> |
| * TCP send fixes (C) 1998 Red Hat Software <alan@redhat.com> |
| * TCP NFS related read + write fixes |
| * (C) 1999 Dave Airlie, University of Limerick, Ireland <airlied@linux.ie> |
| * |
| * Rewrite of larges part of the code in order to stabilize TCP stuff. |
| * Fix behaviour when socket buffer is full. |
| * (C) 1999 Trond Myklebust <trond.myklebust@fys.uio.no> |
| * |
| * IP socket transport implementation, (C) 2005 Chuck Lever <cel@netapp.com> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/capability.h> |
| #include <linux/sched.h> |
| #include <linux/pagemap.h> |
| #include <linux/errno.h> |
| #include <linux/socket.h> |
| #include <linux/in.h> |
| #include <linux/net.h> |
| #include <linux/mm.h> |
| #include <linux/udp.h> |
| #include <linux/tcp.h> |
| #include <linux/sunrpc/clnt.h> |
| #include <linux/sunrpc/sched.h> |
| #include <linux/file.h> |
| |
| #include <net/sock.h> |
| #include <net/checksum.h> |
| #include <net/udp.h> |
| #include <net/tcp.h> |
| |
| /* |
| * xprtsock tunables |
| */ |
| unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE; |
| unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE; |
| |
| unsigned int xprt_min_resvport = RPC_DEF_MIN_RESVPORT; |
| unsigned int xprt_max_resvport = RPC_DEF_MAX_RESVPORT; |
| |
| /* |
| * How many times to try sending a request on a socket before waiting |
| * for the socket buffer to clear. |
| */ |
| #define XS_SENDMSG_RETRY (10U) |
| |
| /* |
| * Time out for an RPC UDP socket connect. UDP socket connects are |
| * synchronous, but we set a timeout anyway in case of resource |
| * exhaustion on the local host. |
| */ |
| #define XS_UDP_CONN_TO (5U * HZ) |
| |
| /* |
| * Wait duration for an RPC TCP connection to be established. Solaris |
| * NFS over TCP uses 60 seconds, for example, which is in line with how |
| * long a server takes to reboot. |
| */ |
| #define XS_TCP_CONN_TO (60U * HZ) |
| |
| /* |
| * Wait duration for a reply from the RPC portmapper. |
| */ |
| #define XS_BIND_TO (60U * HZ) |
| |
| /* |
| * Delay if a UDP socket connect error occurs. This is most likely some |
| * kind of resource problem on the local host. |
| */ |
| #define XS_UDP_REEST_TO (2U * HZ) |
| |
| /* |
| * The reestablish timeout allows clients to delay for a bit before attempting |
| * to reconnect to a server that just dropped our connection. |
| * |
| * We implement an exponential backoff when trying to reestablish a TCP |
| * transport connection with the server. Some servers like to drop a TCP |
| * connection when they are overworked, so we start with a short timeout and |
| * increase over time if the server is down or not responding. |
| */ |
| #define XS_TCP_INIT_REEST_TO (3U * HZ) |
| #define XS_TCP_MAX_REEST_TO (5U * 60 * HZ) |
| |
| /* |
| * TCP idle timeout; client drops the transport socket if it is idle |
| * for this long. Note that we also timeout UDP sockets to prevent |
| * holding port numbers when there is no RPC traffic. |
| */ |
| #define XS_IDLE_DISC_TO (5U * 60 * HZ) |
| |
| #ifdef RPC_DEBUG |
| # undef RPC_DEBUG_DATA |
| # define RPCDBG_FACILITY RPCDBG_TRANS |
| #endif |
| |
| #ifdef RPC_DEBUG_DATA |
| static void xs_pktdump(char *msg, u32 *packet, unsigned int count) |
| { |
| u8 *buf = (u8 *) packet; |
| int j; |
| |
| dprintk("RPC: %s\n", msg); |
| for (j = 0; j < count && j < 128; j += 4) { |
| if (!(j & 31)) { |
| if (j) |
| dprintk("\n"); |
| dprintk("0x%04x ", j); |
| } |
| dprintk("%02x%02x%02x%02x ", |
| buf[j], buf[j+1], buf[j+2], buf[j+3]); |
| } |
| dprintk("\n"); |
| } |
| #else |
| static inline void xs_pktdump(char *msg, u32 *packet, unsigned int count) |
| { |
| /* NOP */ |
| } |
| #endif |
| |
| static void xs_format_peer_addresses(struct rpc_xprt *xprt) |
| { |
| struct sockaddr_in *addr = (struct sockaddr_in *) &xprt->addr; |
| char *buf; |
| |
| buf = kzalloc(20, GFP_KERNEL); |
| if (buf) { |
| snprintf(buf, 20, "%u.%u.%u.%u", |
| NIPQUAD(addr->sin_addr.s_addr)); |
| } |
| xprt->address_strings[RPC_DISPLAY_ADDR] = buf; |
| |
| buf = kzalloc(8, GFP_KERNEL); |
| if (buf) { |
| snprintf(buf, 8, "%u", |
| ntohs(addr->sin_port)); |
| } |
| xprt->address_strings[RPC_DISPLAY_PORT] = buf; |
| |
| if (xprt->prot == IPPROTO_UDP) |
| xprt->address_strings[RPC_DISPLAY_PROTO] = "udp"; |
| else |
| xprt->address_strings[RPC_DISPLAY_PROTO] = "tcp"; |
| |
| buf = kzalloc(48, GFP_KERNEL); |
| if (buf) { |
| snprintf(buf, 48, "addr=%u.%u.%u.%u port=%u proto=%s", |
| NIPQUAD(addr->sin_addr.s_addr), |
| ntohs(addr->sin_port), |
| xprt->prot == IPPROTO_UDP ? "udp" : "tcp"); |
| } |
| xprt->address_strings[RPC_DISPLAY_ALL] = buf; |
| } |
| |
| static void xs_free_peer_addresses(struct rpc_xprt *xprt) |
| { |
| kfree(xprt->address_strings[RPC_DISPLAY_ADDR]); |
| kfree(xprt->address_strings[RPC_DISPLAY_PORT]); |
| kfree(xprt->address_strings[RPC_DISPLAY_ALL]); |
| } |
| |
| #define XS_SENDMSG_FLAGS (MSG_DONTWAIT | MSG_NOSIGNAL) |
| |
| static inline int xs_send_head(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, unsigned int len) |
| { |
| struct kvec iov = { |
| .iov_base = xdr->head[0].iov_base + base, |
| .iov_len = len - base, |
| }; |
| struct msghdr msg = { |
| .msg_name = addr, |
| .msg_namelen = addrlen, |
| .msg_flags = XS_SENDMSG_FLAGS, |
| }; |
| |
| if (xdr->len > len) |
| msg.msg_flags |= MSG_MORE; |
| |
| if (likely(iov.iov_len)) |
| return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); |
| return kernel_sendmsg(sock, &msg, NULL, 0, 0); |
| } |
| |
| static int xs_send_tail(struct socket *sock, struct xdr_buf *xdr, unsigned int base, unsigned int len) |
| { |
| struct kvec iov = { |
| .iov_base = xdr->tail[0].iov_base + base, |
| .iov_len = len - base, |
| }; |
| struct msghdr msg = { |
| .msg_flags = XS_SENDMSG_FLAGS, |
| }; |
| |
| return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); |
| } |
| |
| /** |
| * xs_sendpages - write pages directly to a socket |
| * @sock: socket to send on |
| * @addr: UDP only -- address of destination |
| * @addrlen: UDP only -- length of destination address |
| * @xdr: buffer containing this request |
| * @base: starting position in the buffer |
| * |
| */ |
| static inline int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base) |
| { |
| struct page **ppage = xdr->pages; |
| unsigned int len, pglen = xdr->page_len; |
| int err, ret = 0; |
| ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); |
| |
| if (unlikely(!sock)) |
| return -ENOTCONN; |
| |
| clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); |
| |
| len = xdr->head[0].iov_len; |
| if (base < len || (addr != NULL && base == 0)) { |
| err = xs_send_head(sock, addr, addrlen, xdr, base, len); |
| if (ret == 0) |
| ret = err; |
| else if (err > 0) |
| ret += err; |
| if (err != (len - base)) |
| goto out; |
| base = 0; |
| } else |
| base -= len; |
| |
| if (unlikely(pglen == 0)) |
| goto copy_tail; |
| if (unlikely(base >= pglen)) { |
| base -= pglen; |
| goto copy_tail; |
| } |
| if (base || xdr->page_base) { |
| pglen -= base; |
| base += xdr->page_base; |
| ppage += base >> PAGE_CACHE_SHIFT; |
| base &= ~PAGE_CACHE_MASK; |
| } |
| |
| sendpage = sock->ops->sendpage ? : sock_no_sendpage; |
| do { |
| int flags = XS_SENDMSG_FLAGS; |
| |
| len = PAGE_CACHE_SIZE; |
| if (base) |
| len -= base; |
| if (pglen < len) |
| len = pglen; |
| |
| if (pglen != len || xdr->tail[0].iov_len != 0) |
| flags |= MSG_MORE; |
| |
| /* Hmm... We might be dealing with highmem pages */ |
| if (PageHighMem(*ppage)) |
| sendpage = sock_no_sendpage; |
| err = sendpage(sock, *ppage, base, len, flags); |
| if (ret == 0) |
| ret = err; |
| else if (err > 0) |
| ret += err; |
| if (err != len) |
| goto out; |
| base = 0; |
| ppage++; |
| } while ((pglen -= len) != 0); |
| copy_tail: |
| len = xdr->tail[0].iov_len; |
| if (base < len) { |
| err = xs_send_tail(sock, xdr, base, len); |
| if (ret == 0) |
| ret = err; |
| else if (err > 0) |
| ret += err; |
| } |
| out: |
| return ret; |
| } |
| |
| /** |
| * xs_nospace - place task on wait queue if transmit was incomplete |
| * @task: task to put to sleep |
| * |
| */ |
| static void xs_nospace(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| |
| dprintk("RPC: %4d xmit incomplete (%u left of %u)\n", |
| task->tk_pid, req->rq_slen - req->rq_bytes_sent, |
| req->rq_slen); |
| |
| if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { |
| /* Protect against races with write_space */ |
| spin_lock_bh(&xprt->transport_lock); |
| |
| /* Don't race with disconnect */ |
| if (!xprt_connected(xprt)) |
| task->tk_status = -ENOTCONN; |
| else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) |
| xprt_wait_for_buffer_space(task); |
| |
| spin_unlock_bh(&xprt->transport_lock); |
| } else |
| /* Keep holding the socket if it is blocked */ |
| rpc_delay(task, HZ>>4); |
| } |
| |
| /** |
| * xs_udp_send_request - write an RPC request to a UDP socket |
| * @task: address of RPC task that manages the state of an RPC request |
| * |
| * Return values: |
| * 0: The request has been sent |
| * EAGAIN: The socket was blocked, please call again later to |
| * complete the request |
| * ENOTCONN: Caller needs to invoke connect logic then call again |
| * other: Some other error occured, the request was not sent |
| */ |
| static int xs_udp_send_request(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| struct xdr_buf *xdr = &req->rq_snd_buf; |
| int status; |
| |
| xs_pktdump("packet data:", |
| req->rq_svec->iov_base, |
| req->rq_svec->iov_len); |
| |
| req->rq_xtime = jiffies; |
| status = xs_sendpages(xprt->sock, (struct sockaddr *) &xprt->addr, |
| xprt->addrlen, xdr, req->rq_bytes_sent); |
| |
| dprintk("RPC: xs_udp_send_request(%u) = %d\n", |
| xdr->len - req->rq_bytes_sent, status); |
| |
| if (likely(status >= (int) req->rq_slen)) |
| return 0; |
| |
| /* Still some bytes left; set up for a retry later. */ |
| if (status > 0) |
| status = -EAGAIN; |
| |
| switch (status) { |
| case -ENETUNREACH: |
| case -EPIPE: |
| case -ECONNREFUSED: |
| /* When the server has died, an ICMP port unreachable message |
| * prompts ECONNREFUSED. */ |
| break; |
| case -EAGAIN: |
| xs_nospace(task); |
| break; |
| default: |
| dprintk("RPC: sendmsg returned unrecognized error %d\n", |
| -status); |
| break; |
| } |
| |
| return status; |
| } |
| |
| static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf) |
| { |
| u32 reclen = buf->len - sizeof(rpc_fraghdr); |
| rpc_fraghdr *base = buf->head[0].iov_base; |
| *base = htonl(RPC_LAST_STREAM_FRAGMENT | reclen); |
| } |
| |
| /** |
| * xs_tcp_send_request - write an RPC request to a TCP socket |
| * @task: address of RPC task that manages the state of an RPC request |
| * |
| * Return values: |
| * 0: The request has been sent |
| * EAGAIN: The socket was blocked, please call again later to |
| * complete the request |
| * ENOTCONN: Caller needs to invoke connect logic then call again |
| * other: Some other error occured, the request was not sent |
| * |
| * XXX: In the case of soft timeouts, should we eventually give up |
| * if sendmsg is not able to make progress? |
| */ |
| static int xs_tcp_send_request(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| struct xdr_buf *xdr = &req->rq_snd_buf; |
| int status, retry = 0; |
| |
| xs_encode_tcp_record_marker(&req->rq_snd_buf); |
| |
| xs_pktdump("packet data:", |
| req->rq_svec->iov_base, |
| req->rq_svec->iov_len); |
| |
| /* Continue transmitting the packet/record. We must be careful |
| * to cope with writespace callbacks arriving _after_ we have |
| * called sendmsg(). */ |
| while (1) { |
| req->rq_xtime = jiffies; |
| status = xs_sendpages(xprt->sock, NULL, 0, xdr, |
| req->rq_bytes_sent); |
| |
| dprintk("RPC: xs_tcp_send_request(%u) = %d\n", |
| xdr->len - req->rq_bytes_sent, status); |
| |
| if (unlikely(status < 0)) |
| break; |
| |
| /* If we've sent the entire packet, immediately |
| * reset the count of bytes sent. */ |
| req->rq_bytes_sent += status; |
| task->tk_bytes_sent += status; |
| if (likely(req->rq_bytes_sent >= req->rq_slen)) { |
| req->rq_bytes_sent = 0; |
| return 0; |
| } |
| |
| status = -EAGAIN; |
| if (retry++ > XS_SENDMSG_RETRY) |
| break; |
| } |
| |
| switch (status) { |
| case -EAGAIN: |
| xs_nospace(task); |
| break; |
| case -ECONNREFUSED: |
| case -ECONNRESET: |
| case -ENOTCONN: |
| case -EPIPE: |
| status = -ENOTCONN; |
| break; |
| default: |
| dprintk("RPC: sendmsg returned unrecognized error %d\n", |
| -status); |
| xprt_disconnect(xprt); |
| break; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * xs_tcp_release_xprt - clean up after a tcp transmission |
| * @xprt: transport |
| * @task: rpc task |
| * |
| * This cleans up if an error causes us to abort the transmission of a request. |
| * In this case, the socket may need to be reset in order to avoid confusing |
| * the server. |
| */ |
| static void xs_tcp_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| struct rpc_rqst *req; |
| |
| if (task != xprt->snd_task) |
| return; |
| if (task == NULL) |
| goto out_release; |
| req = task->tk_rqstp; |
| if (req->rq_bytes_sent == 0) |
| goto out_release; |
| if (req->rq_bytes_sent == req->rq_snd_buf.len) |
| goto out_release; |
| set_bit(XPRT_CLOSE_WAIT, &task->tk_xprt->state); |
| out_release: |
| xprt_release_xprt(xprt, task); |
| } |
| |
| /** |
| * xs_close - close a socket |
| * @xprt: transport |
| * |
| * This is used when all requests are complete; ie, no DRC state remains |
| * on the server we want to save. |
| */ |
| static void xs_close(struct rpc_xprt *xprt) |
| { |
| struct socket *sock = xprt->sock; |
| struct sock *sk = xprt->inet; |
| |
| if (!sk) |
| goto clear_close_wait; |
| |
| dprintk("RPC: xs_close xprt %p\n", xprt); |
| |
| write_lock_bh(&sk->sk_callback_lock); |
| xprt->inet = NULL; |
| xprt->sock = NULL; |
| |
| sk->sk_user_data = NULL; |
| sk->sk_data_ready = xprt->old_data_ready; |
| sk->sk_state_change = xprt->old_state_change; |
| sk->sk_write_space = xprt->old_write_space; |
| write_unlock_bh(&sk->sk_callback_lock); |
| |
| sk->sk_no_check = 0; |
| |
| sock_release(sock); |
| clear_close_wait: |
| smp_mb__before_clear_bit(); |
| clear_bit(XPRT_CLOSE_WAIT, &xprt->state); |
| smp_mb__after_clear_bit(); |
| } |
| |
| /** |
| * xs_destroy - prepare to shutdown a transport |
| * @xprt: doomed transport |
| * |
| */ |
| static void xs_destroy(struct rpc_xprt *xprt) |
| { |
| dprintk("RPC: xs_destroy xprt %p\n", xprt); |
| |
| cancel_delayed_work(&xprt->connect_worker); |
| flush_scheduled_work(); |
| |
| xprt_disconnect(xprt); |
| xs_close(xprt); |
| xs_free_peer_addresses(xprt); |
| kfree(xprt->slot); |
| } |
| |
| static inline struct rpc_xprt *xprt_from_sock(struct sock *sk) |
| { |
| return (struct rpc_xprt *) sk->sk_user_data; |
| } |
| |
| /** |
| * xs_udp_data_ready - "data ready" callback for UDP sockets |
| * @sk: socket with data to read |
| * @len: how much data to read |
| * |
| */ |
| static void xs_udp_data_ready(struct sock *sk, int len) |
| { |
| struct rpc_task *task; |
| struct rpc_xprt *xprt; |
| struct rpc_rqst *rovr; |
| struct sk_buff *skb; |
| int err, repsize, copied; |
| u32 _xid, *xp; |
| |
| read_lock(&sk->sk_callback_lock); |
| dprintk("RPC: xs_udp_data_ready...\n"); |
| if (!(xprt = xprt_from_sock(sk))) |
| goto out; |
| |
| if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) |
| goto out; |
| |
| if (xprt->shutdown) |
| goto dropit; |
| |
| repsize = skb->len - sizeof(struct udphdr); |
| if (repsize < 4) { |
| dprintk("RPC: impossible RPC reply size %d!\n", repsize); |
| goto dropit; |
| } |
| |
| /* Copy the XID from the skb... */ |
| xp = skb_header_pointer(skb, sizeof(struct udphdr), |
| sizeof(_xid), &_xid); |
| if (xp == NULL) |
| goto dropit; |
| |
| /* Look up and lock the request corresponding to the given XID */ |
| spin_lock(&xprt->transport_lock); |
| rovr = xprt_lookup_rqst(xprt, *xp); |
| if (!rovr) |
| goto out_unlock; |
| task = rovr->rq_task; |
| |
| if ((copied = rovr->rq_private_buf.buflen) > repsize) |
| copied = repsize; |
| |
| /* Suck it into the iovec, verify checksum if not done by hw. */ |
| if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb)) |
| goto out_unlock; |
| |
| /* Something worked... */ |
| dst_confirm(skb->dst); |
| |
| xprt_adjust_cwnd(task, copied); |
| xprt_update_rtt(task); |
| xprt_complete_rqst(task, copied); |
| |
| out_unlock: |
| spin_unlock(&xprt->transport_lock); |
| dropit: |
| skb_free_datagram(sk, skb); |
| out: |
| read_unlock(&sk->sk_callback_lock); |
| } |
| |
| static inline size_t xs_tcp_copy_data(skb_reader_t *desc, void *p, size_t len) |
| { |
| if (len > desc->count) |
| len = desc->count; |
| if (skb_copy_bits(desc->skb, desc->offset, p, len)) { |
| dprintk("RPC: failed to copy %zu bytes from skb. %zu bytes remain\n", |
| len, desc->count); |
| return 0; |
| } |
| desc->offset += len; |
| desc->count -= len; |
| dprintk("RPC: copied %zu bytes from skb. %zu bytes remain\n", |
| len, desc->count); |
| return len; |
| } |
| |
| static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) |
| { |
| size_t len, used; |
| char *p; |
| |
| p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset; |
| len = sizeof(xprt->tcp_recm) - xprt->tcp_offset; |
| used = xs_tcp_copy_data(desc, p, len); |
| xprt->tcp_offset += used; |
| if (used != len) |
| return; |
| |
| xprt->tcp_reclen = ntohl(xprt->tcp_recm); |
| if (xprt->tcp_reclen & RPC_LAST_STREAM_FRAGMENT) |
| xprt->tcp_flags |= XPRT_LAST_FRAG; |
| else |
| xprt->tcp_flags &= ~XPRT_LAST_FRAG; |
| xprt->tcp_reclen &= RPC_FRAGMENT_SIZE_MASK; |
| |
| xprt->tcp_flags &= ~XPRT_COPY_RECM; |
| xprt->tcp_offset = 0; |
| |
| /* Sanity check of the record length */ |
| if (unlikely(xprt->tcp_reclen < 4)) { |
| dprintk("RPC: invalid TCP record fragment length\n"); |
| xprt_disconnect(xprt); |
| return; |
| } |
| dprintk("RPC: reading TCP record fragment of length %d\n", |
| xprt->tcp_reclen); |
| } |
| |
| static void xs_tcp_check_recm(struct rpc_xprt *xprt) |
| { |
| dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n", |
| xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags); |
| if (xprt->tcp_offset == xprt->tcp_reclen) { |
| xprt->tcp_flags |= XPRT_COPY_RECM; |
| xprt->tcp_offset = 0; |
| if (xprt->tcp_flags & XPRT_LAST_FRAG) { |
| xprt->tcp_flags &= ~XPRT_COPY_DATA; |
| xprt->tcp_flags |= XPRT_COPY_XID; |
| xprt->tcp_copied = 0; |
| } |
| } |
| } |
| |
| static inline void xs_tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) |
| { |
| size_t len, used; |
| char *p; |
| |
| len = sizeof(xprt->tcp_xid) - xprt->tcp_offset; |
| dprintk("RPC: reading XID (%Zu bytes)\n", len); |
| p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset; |
| used = xs_tcp_copy_data(desc, p, len); |
| xprt->tcp_offset += used; |
| if (used != len) |
| return; |
| xprt->tcp_flags &= ~XPRT_COPY_XID; |
| xprt->tcp_flags |= XPRT_COPY_DATA; |
| xprt->tcp_copied = 4; |
| dprintk("RPC: reading reply for XID %08x\n", |
| ntohl(xprt->tcp_xid)); |
| xs_tcp_check_recm(xprt); |
| } |
| |
| static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) |
| { |
| struct rpc_rqst *req; |
| struct xdr_buf *rcvbuf; |
| size_t len; |
| ssize_t r; |
| |
| /* Find and lock the request corresponding to this xid */ |
| spin_lock(&xprt->transport_lock); |
| req = xprt_lookup_rqst(xprt, xprt->tcp_xid); |
| if (!req) { |
| xprt->tcp_flags &= ~XPRT_COPY_DATA; |
| dprintk("RPC: XID %08x request not found!\n", |
| ntohl(xprt->tcp_xid)); |
| spin_unlock(&xprt->transport_lock); |
| return; |
| } |
| |
| rcvbuf = &req->rq_private_buf; |
| len = desc->count; |
| if (len > xprt->tcp_reclen - xprt->tcp_offset) { |
| skb_reader_t my_desc; |
| |
| len = xprt->tcp_reclen - xprt->tcp_offset; |
| memcpy(&my_desc, desc, sizeof(my_desc)); |
| my_desc.count = len; |
| r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, |
| &my_desc, xs_tcp_copy_data); |
| desc->count -= r; |
| desc->offset += r; |
| } else |
| r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, |
| desc, xs_tcp_copy_data); |
| |
| if (r > 0) { |
| xprt->tcp_copied += r; |
| xprt->tcp_offset += r; |
| } |
| if (r != len) { |
| /* Error when copying to the receive buffer, |
| * usually because we weren't able to allocate |
| * additional buffer pages. All we can do now |
| * is turn off XPRT_COPY_DATA, so the request |
| * will not receive any additional updates, |
| * and time out. |
| * Any remaining data from this record will |
| * be discarded. |
| */ |
| xprt->tcp_flags &= ~XPRT_COPY_DATA; |
| dprintk("RPC: XID %08x truncated request\n", |
| ntohl(xprt->tcp_xid)); |
| dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", |
| xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); |
| goto out; |
| } |
| |
| dprintk("RPC: XID %08x read %Zd bytes\n", |
| ntohl(xprt->tcp_xid), r); |
| dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", |
| xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); |
| |
| if (xprt->tcp_copied == req->rq_private_buf.buflen) |
| xprt->tcp_flags &= ~XPRT_COPY_DATA; |
| else if (xprt->tcp_offset == xprt->tcp_reclen) { |
| if (xprt->tcp_flags & XPRT_LAST_FRAG) |
| xprt->tcp_flags &= ~XPRT_COPY_DATA; |
| } |
| |
| out: |
| if (!(xprt->tcp_flags & XPRT_COPY_DATA)) |
| xprt_complete_rqst(req->rq_task, xprt->tcp_copied); |
| spin_unlock(&xprt->transport_lock); |
| xs_tcp_check_recm(xprt); |
| } |
| |
| static inline void xs_tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) |
| { |
| size_t len; |
| |
| len = xprt->tcp_reclen - xprt->tcp_offset; |
| if (len > desc->count) |
| len = desc->count; |
| desc->count -= len; |
| desc->offset += len; |
| xprt->tcp_offset += len; |
| dprintk("RPC: discarded %Zu bytes\n", len); |
| xs_tcp_check_recm(xprt); |
| } |
| |
| static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, unsigned int offset, size_t len) |
| { |
| struct rpc_xprt *xprt = rd_desc->arg.data; |
| skb_reader_t desc = { |
| .skb = skb, |
| .offset = offset, |
| .count = len, |
| .csum = 0 |
| }; |
| |
| dprintk("RPC: xs_tcp_data_recv started\n"); |
| do { |
| /* Read in a new fragment marker if necessary */ |
| /* Can we ever really expect to get completely empty fragments? */ |
| if (xprt->tcp_flags & XPRT_COPY_RECM) { |
| xs_tcp_read_fraghdr(xprt, &desc); |
| continue; |
| } |
| /* Read in the xid if necessary */ |
| if (xprt->tcp_flags & XPRT_COPY_XID) { |
| xs_tcp_read_xid(xprt, &desc); |
| continue; |
| } |
| /* Read in the request data */ |
| if (xprt->tcp_flags & XPRT_COPY_DATA) { |
| xs_tcp_read_request(xprt, &desc); |
| continue; |
| } |
| /* Skip over any trailing bytes on short reads */ |
| xs_tcp_read_discard(xprt, &desc); |
| } while (desc.count); |
| dprintk("RPC: xs_tcp_data_recv done\n"); |
| return len - desc.count; |
| } |
| |
| /** |
| * xs_tcp_data_ready - "data ready" callback for TCP sockets |
| * @sk: socket with data to read |
| * @bytes: how much data to read |
| * |
| */ |
| static void xs_tcp_data_ready(struct sock *sk, int bytes) |
| { |
| struct rpc_xprt *xprt; |
| read_descriptor_t rd_desc; |
| |
| read_lock(&sk->sk_callback_lock); |
| dprintk("RPC: xs_tcp_data_ready...\n"); |
| if (!(xprt = xprt_from_sock(sk))) |
| goto out; |
| if (xprt->shutdown) |
| goto out; |
| |
| /* We use rd_desc to pass struct xprt to xs_tcp_data_recv */ |
| rd_desc.arg.data = xprt; |
| rd_desc.count = 65536; |
| tcp_read_sock(sk, &rd_desc, xs_tcp_data_recv); |
| out: |
| read_unlock(&sk->sk_callback_lock); |
| } |
| |
| /** |
| * xs_tcp_state_change - callback to handle TCP socket state changes |
| * @sk: socket whose state has changed |
| * |
| */ |
| static void xs_tcp_state_change(struct sock *sk) |
| { |
| struct rpc_xprt *xprt; |
| |
| read_lock(&sk->sk_callback_lock); |
| if (!(xprt = xprt_from_sock(sk))) |
| goto out; |
| dprintk("RPC: xs_tcp_state_change client %p...\n", xprt); |
| dprintk("RPC: state %x conn %d dead %d zapped %d\n", |
| sk->sk_state, xprt_connected(xprt), |
| sock_flag(sk, SOCK_DEAD), |
| sock_flag(sk, SOCK_ZAPPED)); |
| |
| switch (sk->sk_state) { |
| case TCP_ESTABLISHED: |
| spin_lock_bh(&xprt->transport_lock); |
| if (!xprt_test_and_set_connected(xprt)) { |
| /* Reset TCP record info */ |
| xprt->tcp_offset = 0; |
| xprt->tcp_reclen = 0; |
| xprt->tcp_copied = 0; |
| xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; |
| xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; |
| xprt_wake_pending_tasks(xprt, 0); |
| } |
| spin_unlock_bh(&xprt->transport_lock); |
| break; |
| case TCP_SYN_SENT: |
| case TCP_SYN_RECV: |
| break; |
| case TCP_CLOSE_WAIT: |
| /* Try to schedule an autoclose RPC calls */ |
| set_bit(XPRT_CLOSE_WAIT, &xprt->state); |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state) == 0) |
| schedule_work(&xprt->task_cleanup); |
| default: |
| xprt_disconnect(xprt); |
| } |
| out: |
| read_unlock(&sk->sk_callback_lock); |
| } |
| |
| /** |
| * xs_udp_write_space - callback invoked when socket buffer space |
| * becomes available |
| * @sk: socket whose state has changed |
| * |
| * Called when more output buffer space is available for this socket. |
| * We try not to wake our writers until they can make "significant" |
| * progress, otherwise we'll waste resources thrashing kernel_sendmsg |
| * with a bunch of small requests. |
| */ |
| static void xs_udp_write_space(struct sock *sk) |
| { |
| read_lock(&sk->sk_callback_lock); |
| |
| /* from net/core/sock.c:sock_def_write_space */ |
| if (sock_writeable(sk)) { |
| struct socket *sock; |
| struct rpc_xprt *xprt; |
| |
| if (unlikely(!(sock = sk->sk_socket))) |
| goto out; |
| if (unlikely(!(xprt = xprt_from_sock(sk)))) |
| goto out; |
| if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags))) |
| goto out; |
| |
| xprt_write_space(xprt); |
| } |
| |
| out: |
| read_unlock(&sk->sk_callback_lock); |
| } |
| |
| /** |
| * xs_tcp_write_space - callback invoked when socket buffer space |
| * becomes available |
| * @sk: socket whose state has changed |
| * |
| * Called when more output buffer space is available for this socket. |
| * We try not to wake our writers until they can make "significant" |
| * progress, otherwise we'll waste resources thrashing kernel_sendmsg |
| * with a bunch of small requests. |
| */ |
| static void xs_tcp_write_space(struct sock *sk) |
| { |
| read_lock(&sk->sk_callback_lock); |
| |
| /* from net/core/stream.c:sk_stream_write_space */ |
| if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { |
| struct socket *sock; |
| struct rpc_xprt *xprt; |
| |
| if (unlikely(!(sock = sk->sk_socket))) |
| goto out; |
| if (unlikely(!(xprt = xprt_from_sock(sk)))) |
| goto out; |
| if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags))) |
| goto out; |
| |
| xprt_write_space(xprt); |
| } |
| |
| out: |
| read_unlock(&sk->sk_callback_lock); |
| } |
| |
| static void xs_udp_do_set_buffer_size(struct rpc_xprt *xprt) |
| { |
| struct sock *sk = xprt->inet; |
| |
| if (xprt->rcvsize) { |
| sk->sk_userlocks |= SOCK_RCVBUF_LOCK; |
| sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2; |
| } |
| if (xprt->sndsize) { |
| sk->sk_userlocks |= SOCK_SNDBUF_LOCK; |
| sk->sk_sndbuf = xprt->sndsize * xprt->max_reqs * 2; |
| sk->sk_write_space(sk); |
| } |
| } |
| |
| /** |
| * xs_udp_set_buffer_size - set send and receive limits |
| * @xprt: generic transport |
| * @sndsize: requested size of send buffer, in bytes |
| * @rcvsize: requested size of receive buffer, in bytes |
| * |
| * Set socket send and receive buffer size limits. |
| */ |
| static void xs_udp_set_buffer_size(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize) |
| { |
| xprt->sndsize = 0; |
| if (sndsize) |
| xprt->sndsize = sndsize + 1024; |
| xprt->rcvsize = 0; |
| if (rcvsize) |
| xprt->rcvsize = rcvsize + 1024; |
| |
| xs_udp_do_set_buffer_size(xprt); |
| } |
| |
| /** |
| * xs_udp_timer - called when a retransmit timeout occurs on a UDP transport |
| * @task: task that timed out |
| * |
| * Adjust the congestion window after a retransmit timeout has occurred. |
| */ |
| static void xs_udp_timer(struct rpc_task *task) |
| { |
| xprt_adjust_cwnd(task, -ETIMEDOUT); |
| } |
| |
| static unsigned short xs_get_random_port(void) |
| { |
| unsigned short range = xprt_max_resvport - xprt_min_resvport; |
| unsigned short rand = (unsigned short) net_random() % range; |
| return rand + xprt_min_resvport; |
| } |
| |
| /** |
| * xs_print_peer_address - format an IPv4 address for printing |
| * @xprt: generic transport |
| * @format: flags field indicating which parts of the address to render |
| */ |
| static char *xs_print_peer_address(struct rpc_xprt *xprt, enum rpc_display_format_t format) |
| { |
| if (xprt->address_strings[format] != NULL) |
| return xprt->address_strings[format]; |
| else |
| return "unprintable"; |
| } |
| |
| /** |
| * xs_set_port - reset the port number in the remote endpoint address |
| * @xprt: generic transport |
| * @port: new port number |
| * |
| */ |
| static void xs_set_port(struct rpc_xprt *xprt, unsigned short port) |
| { |
| struct sockaddr_in *sap = (struct sockaddr_in *) &xprt->addr; |
| |
| dprintk("RPC: setting port for xprt %p to %u\n", xprt, port); |
| |
| sap->sin_port = htons(port); |
| } |
| |
| static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) |
| { |
| struct sockaddr_in myaddr = { |
| .sin_family = AF_INET, |
| }; |
| int err; |
| unsigned short port = xprt->port; |
| |
| do { |
| myaddr.sin_port = htons(port); |
| err = sock->ops->bind(sock, (struct sockaddr *) &myaddr, |
| sizeof(myaddr)); |
| if (err == 0) { |
| xprt->port = port; |
| dprintk("RPC: xs_bindresvport bound to port %u\n", |
| port); |
| return 0; |
| } |
| if (port <= xprt_min_resvport) |
| port = xprt_max_resvport; |
| else |
| port--; |
| } while (err == -EADDRINUSE && port != xprt->port); |
| |
| dprintk("RPC: can't bind to reserved port (%d).\n", -err); |
| return err; |
| } |
| |
| /** |
| * xs_udp_connect_worker - set up a UDP socket |
| * @args: RPC transport to connect |
| * |
| * Invoked by a work queue tasklet. |
| */ |
| static void xs_udp_connect_worker(void *args) |
| { |
| struct rpc_xprt *xprt = (struct rpc_xprt *) args; |
| struct socket *sock = xprt->sock; |
| int err, status = -EIO; |
| |
| if (xprt->shutdown || !xprt_bound(xprt)) |
| goto out; |
| |
| /* Start by resetting any existing state */ |
| xs_close(xprt); |
| |
| if ((err = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock)) < 0) { |
| dprintk("RPC: can't create UDP transport socket (%d).\n", -err); |
| goto out; |
| } |
| |
| if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { |
| sock_release(sock); |
| goto out; |
| } |
| |
| dprintk("RPC: worker connecting xprt %p to address: %s\n", |
| xprt, xs_print_peer_address(xprt, RPC_DISPLAY_ALL)); |
| |
| if (!xprt->inet) { |
| struct sock *sk = sock->sk; |
| |
| write_lock_bh(&sk->sk_callback_lock); |
| |
| sk->sk_user_data = xprt; |
| xprt->old_data_ready = sk->sk_data_ready; |
| xprt->old_state_change = sk->sk_state_change; |
| xprt->old_write_space = sk->sk_write_space; |
| sk->sk_data_ready = xs_udp_data_ready; |
| sk->sk_write_space = xs_udp_write_space; |
| sk->sk_no_check = UDP_CSUM_NORCV; |
| sk->sk_allocation = GFP_ATOMIC; |
| |
| xprt_set_connected(xprt); |
| |
| /* Reset to new socket */ |
| xprt->sock = sock; |
| xprt->inet = sk; |
| |
| write_unlock_bh(&sk->sk_callback_lock); |
| } |
| xs_udp_do_set_buffer_size(xprt); |
| status = 0; |
| out: |
| xprt_wake_pending_tasks(xprt, status); |
| xprt_clear_connecting(xprt); |
| } |
| |
| /* |
| * We need to preserve the port number so the reply cache on the server can |
| * find our cached RPC replies when we get around to reconnecting. |
| */ |
| static void xs_tcp_reuse_connection(struct rpc_xprt *xprt) |
| { |
| int result; |
| struct socket *sock = xprt->sock; |
| struct sockaddr any; |
| |
| dprintk("RPC: disconnecting xprt %p to reuse port\n", xprt); |
| |
| /* |
| * Disconnect the transport socket by doing a connect operation |
| * with AF_UNSPEC. This should return immediately... |
| */ |
| memset(&any, 0, sizeof(any)); |
| any.sa_family = AF_UNSPEC; |
| result = sock->ops->connect(sock, &any, sizeof(any), 0); |
| if (result) |
| dprintk("RPC: AF_UNSPEC connect return code %d\n", |
| result); |
| } |
| |
| /** |
| * xs_tcp_connect_worker - connect a TCP socket to a remote endpoint |
| * @args: RPC transport to connect |
| * |
| * Invoked by a work queue tasklet. |
| */ |
| static void xs_tcp_connect_worker(void *args) |
| { |
| struct rpc_xprt *xprt = (struct rpc_xprt *)args; |
| struct socket *sock = xprt->sock; |
| int err, status = -EIO; |
| |
| if (xprt->shutdown || !xprt_bound(xprt)) |
| goto out; |
| |
| if (!xprt->sock) { |
| /* start from scratch */ |
| if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) { |
| dprintk("RPC: can't create TCP transport socket (%d).\n", -err); |
| goto out; |
| } |
| |
| if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { |
| sock_release(sock); |
| goto out; |
| } |
| } else |
| /* "close" the socket, preserving the local port */ |
| xs_tcp_reuse_connection(xprt); |
| |
| dprintk("RPC: worker connecting xprt %p to address: %s\n", |
| xprt, xs_print_peer_address(xprt, RPC_DISPLAY_ALL)); |
| |
| if (!xprt->inet) { |
| struct sock *sk = sock->sk; |
| |
| write_lock_bh(&sk->sk_callback_lock); |
| |
| sk->sk_user_data = xprt; |
| xprt->old_data_ready = sk->sk_data_ready; |
| xprt->old_state_change = sk->sk_state_change; |
| xprt->old_write_space = sk->sk_write_space; |
| sk->sk_data_ready = xs_tcp_data_ready; |
| sk->sk_state_change = xs_tcp_state_change; |
| sk->sk_write_space = xs_tcp_write_space; |
| sk->sk_allocation = GFP_ATOMIC; |
| |
| /* socket options */ |
| sk->sk_userlocks |= SOCK_BINDPORT_LOCK; |
| sock_reset_flag(sk, SOCK_LINGER); |
| tcp_sk(sk)->linger2 = 0; |
| tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; |
| |
| xprt_clear_connected(xprt); |
| |
| /* Reset to new socket */ |
| xprt->sock = sock; |
| xprt->inet = sk; |
| |
| write_unlock_bh(&sk->sk_callback_lock); |
| } |
| |
| /* Tell the socket layer to start connecting... */ |
| xprt->stat.connect_count++; |
| xprt->stat.connect_start = jiffies; |
| status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr, |
| xprt->addrlen, O_NONBLOCK); |
| dprintk("RPC: %p connect status %d connected %d sock state %d\n", |
| xprt, -status, xprt_connected(xprt), sock->sk->sk_state); |
| if (status < 0) { |
| switch (status) { |
| case -EINPROGRESS: |
| case -EALREADY: |
| goto out_clear; |
| case -ECONNREFUSED: |
| case -ECONNRESET: |
| /* retry with existing socket, after a delay */ |
| break; |
| default: |
| /* get rid of existing socket, and retry */ |
| xs_close(xprt); |
| break; |
| } |
| } |
| out: |
| xprt_wake_pending_tasks(xprt, status); |
| out_clear: |
| xprt_clear_connecting(xprt); |
| } |
| |
| /** |
| * xs_connect - connect a socket to a remote endpoint |
| * @task: address of RPC task that manages state of connect request |
| * |
| * TCP: If the remote end dropped the connection, delay reconnecting. |
| * |
| * UDP socket connects are synchronous, but we use a work queue anyway |
| * to guarantee that even unprivileged user processes can set up a |
| * socket on a privileged port. |
| * |
| * If a UDP socket connect fails, the delay behavior here prevents |
| * retry floods (hard mounts). |
| */ |
| static void xs_connect(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| if (xprt_test_and_set_connecting(xprt)) |
| return; |
| |
| if (xprt->sock != NULL) { |
| dprintk("RPC: xs_connect delayed xprt %p for %lu seconds\n", |
| xprt, xprt->reestablish_timeout / HZ); |
| schedule_delayed_work(&xprt->connect_worker, |
| xprt->reestablish_timeout); |
| xprt->reestablish_timeout <<= 1; |
| if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO) |
| xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO; |
| } else { |
| dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); |
| schedule_work(&xprt->connect_worker); |
| |
| /* flush_scheduled_work can sleep... */ |
| if (!RPC_IS_ASYNC(task)) |
| flush_scheduled_work(); |
| } |
| } |
| |
| /** |
| * xs_udp_print_stats - display UDP socket-specifc stats |
| * @xprt: rpc_xprt struct containing statistics |
| * @seq: output file |
| * |
| */ |
| static void xs_udp_print_stats(struct rpc_xprt *xprt, struct seq_file *seq) |
| { |
| seq_printf(seq, "\txprt:\tudp %u %lu %lu %lu %lu %Lu %Lu\n", |
| xprt->port, |
| xprt->stat.bind_count, |
| xprt->stat.sends, |
| xprt->stat.recvs, |
| xprt->stat.bad_xids, |
| xprt->stat.req_u, |
| xprt->stat.bklog_u); |
| } |
| |
| /** |
| * xs_tcp_print_stats - display TCP socket-specifc stats |
| * @xprt: rpc_xprt struct containing statistics |
| * @seq: output file |
| * |
| */ |
| static void xs_tcp_print_stats(struct rpc_xprt *xprt, struct seq_file *seq) |
| { |
| long idle_time = 0; |
| |
| if (xprt_connected(xprt)) |
| idle_time = (long)(jiffies - xprt->last_used) / HZ; |
| |
| seq_printf(seq, "\txprt:\ttcp %u %lu %lu %lu %ld %lu %lu %lu %Lu %Lu\n", |
| xprt->port, |
| xprt->stat.bind_count, |
| xprt->stat.connect_count, |
| xprt->stat.connect_time, |
| idle_time, |
| xprt->stat.sends, |
| xprt->stat.recvs, |
| xprt->stat.bad_xids, |
| xprt->stat.req_u, |
| xprt->stat.bklog_u); |
| } |
| |
| static struct rpc_xprt_ops xs_udp_ops = { |
| .set_buffer_size = xs_udp_set_buffer_size, |
| .print_addr = xs_print_peer_address, |
| .reserve_xprt = xprt_reserve_xprt_cong, |
| .release_xprt = xprt_release_xprt_cong, |
| .rpcbind = rpc_getport, |
| .set_port = xs_set_port, |
| .connect = xs_connect, |
| .buf_alloc = rpc_malloc, |
| .buf_free = rpc_free, |
| .send_request = xs_udp_send_request, |
| .set_retrans_timeout = xprt_set_retrans_timeout_rtt, |
| .timer = xs_udp_timer, |
| .release_request = xprt_release_rqst_cong, |
| .close = xs_close, |
| .destroy = xs_destroy, |
| .print_stats = xs_udp_print_stats, |
| }; |
| |
| static struct rpc_xprt_ops xs_tcp_ops = { |
| .print_addr = xs_print_peer_address, |
| .reserve_xprt = xprt_reserve_xprt, |
| .release_xprt = xs_tcp_release_xprt, |
| .rpcbind = rpc_getport, |
| .set_port = xs_set_port, |
| .connect = xs_connect, |
| .buf_alloc = rpc_malloc, |
| .buf_free = rpc_free, |
| .send_request = xs_tcp_send_request, |
| .set_retrans_timeout = xprt_set_retrans_timeout_def, |
| .close = xs_close, |
| .destroy = xs_destroy, |
| .print_stats = xs_tcp_print_stats, |
| }; |
| |
| /** |
| * xs_setup_udp - Set up transport to use a UDP socket |
| * @xprt: transport to set up |
| * @to: timeout parameters |
| * |
| */ |
| int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) |
| { |
| size_t slot_table_size; |
| struct sockaddr_in *addr = (struct sockaddr_in *) &xprt->addr; |
| |
| xprt->max_reqs = xprt_udp_slot_table_entries; |
| slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]); |
| xprt->slot = kzalloc(slot_table_size, GFP_KERNEL); |
| if (xprt->slot == NULL) |
| return -ENOMEM; |
| |
| if (ntohs(addr->sin_port != 0)) |
| xprt_set_bound(xprt); |
| xprt->port = xs_get_random_port(); |
| |
| xprt->prot = IPPROTO_UDP; |
| xprt->tsh_size = 0; |
| /* XXX: header size can vary due to auth type, IPv6, etc. */ |
| xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); |
| |
| INIT_WORK(&xprt->connect_worker, xs_udp_connect_worker, xprt); |
| xprt->bind_timeout = XS_BIND_TO; |
| xprt->connect_timeout = XS_UDP_CONN_TO; |
| xprt->reestablish_timeout = XS_UDP_REEST_TO; |
| xprt->idle_timeout = XS_IDLE_DISC_TO; |
| |
| xprt->ops = &xs_udp_ops; |
| |
| if (to) |
| xprt->timeout = *to; |
| else |
| xprt_set_timeout(&xprt->timeout, 5, 5 * HZ); |
| |
| xs_format_peer_addresses(xprt); |
| dprintk("RPC: set up transport to address %s\n", |
| xs_print_peer_address(xprt, RPC_DISPLAY_ALL)); |
| |
| return 0; |
| } |
| |
| /** |
| * xs_setup_tcp - Set up transport to use a TCP socket |
| * @xprt: transport to set up |
| * @to: timeout parameters |
| * |
| */ |
| int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) |
| { |
| size_t slot_table_size; |
| struct sockaddr_in *addr = (struct sockaddr_in *) &xprt->addr; |
| |
| xprt->max_reqs = xprt_tcp_slot_table_entries; |
| slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]); |
| xprt->slot = kzalloc(slot_table_size, GFP_KERNEL); |
| if (xprt->slot == NULL) |
| return -ENOMEM; |
| |
| if (ntohs(addr->sin_port) != 0) |
| xprt_set_bound(xprt); |
| xprt->port = xs_get_random_port(); |
| |
| xprt->prot = IPPROTO_TCP; |
| xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); |
| xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; |
| |
| INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt); |
| xprt->bind_timeout = XS_BIND_TO; |
| xprt->connect_timeout = XS_TCP_CONN_TO; |
| xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; |
| xprt->idle_timeout = XS_IDLE_DISC_TO; |
| |
| xprt->ops = &xs_tcp_ops; |
| |
| if (to) |
| xprt->timeout = *to; |
| else |
| xprt_set_timeout(&xprt->timeout, 2, 60 * HZ); |
| |
| xs_format_peer_addresses(xprt); |
| dprintk("RPC: set up transport to address %s\n", |
| xs_print_peer_address(xprt, RPC_DISPLAY_ALL)); |
| |
| return 0; |
| } |