| /* |
| * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation |
| * |
| * Rewrite, cleanup: |
| * |
| * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation |
| * Copyright (C) 2006 Olof Johansson <olof@lixom.net> |
| * |
| * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/crash_dump.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/iommu.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/abs_addr.h> |
| #include <asm/pSeries_reconfig.h> |
| #include <asm/firmware.h> |
| #include <asm/tce.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/udbg.h> |
| |
| #include "plpar_wrappers.h" |
| |
| |
| static int tce_build_pSeries(struct iommu_table *tbl, long index, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 proto_tce; |
| u64 *tcep; |
| u64 rpn; |
| |
| proto_tce = TCE_PCI_READ; // Read allowed |
| |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| tcep = ((u64 *)tbl->it_base) + index; |
| |
| while (npages--) { |
| /* can't move this out since we might cross LMB boundary */ |
| rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; |
| *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; |
| |
| uaddr += TCE_PAGE_SIZE; |
| tcep++; |
| } |
| return 0; |
| } |
| |
| |
| static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) |
| { |
| u64 *tcep; |
| |
| tcep = ((u64 *)tbl->it_base) + index; |
| |
| while (npages--) |
| *(tcep++) = 0; |
| } |
| |
| static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) |
| { |
| u64 *tcep; |
| |
| tcep = ((u64 *)tbl->it_base) + index; |
| |
| return *tcep; |
| } |
| |
| static void tce_free_pSeriesLP(struct iommu_table*, long, long); |
| static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); |
| |
| static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce, tce; |
| u64 rpn; |
| int ret = 0; |
| long tcenum_start = tcenum, npages_start = npages; |
| |
| rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| while (npages--) { |
| tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; |
| rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_free_pSeriesLP(tbl, tcenum_start, |
| (npages_start - (npages + 1))); |
| break; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| printk("\ttce val = 0x%llx\n", tce ); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| rpn++; |
| } |
| return ret; |
| } |
| |
| static DEFINE_PER_CPU(u64 *, tce_page) = NULL; |
| |
| static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce; |
| u64 *tcep; |
| u64 rpn; |
| long l, limit; |
| long tcenum_start = tcenum, npages_start = npages; |
| int ret = 0; |
| |
| if (npages == 1) { |
| return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, |
| direction, attrs); |
| } |
| |
| tcep = __get_cpu_var(tce_page); |
| |
| /* This is safe to do since interrupts are off when we're called |
| * from iommu_alloc{,_sg}() |
| */ |
| if (!tcep) { |
| tcep = (u64 *)__get_free_page(GFP_ATOMIC); |
| /* If allocation fails, fall back to the loop implementation */ |
| if (!tcep) { |
| return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, |
| direction, attrs); |
| } |
| __get_cpu_var(tce_page) = tcep; |
| } |
| |
| rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; |
| rpn++; |
| } |
| |
| rc = plpar_tce_put_indirect((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| (u64)virt_to_abs(tcep), |
| limit); |
| |
| npages -= limit; |
| tcenum += limit; |
| } while (npages > 0 && !rc); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_freemulti_pSeriesLP(tbl, tcenum_start, |
| (npages_start - (npages + limit))); |
| return ret; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| printk("\ttce[0] val = 0x%llx\n", tcep[0]); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| return ret; |
| } |
| |
| static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| |
| while (npages--) { |
| rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| } |
| } |
| |
| |
| static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| |
| rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); |
| printk("\trc = %lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| } |
| |
| static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) |
| { |
| u64 rc; |
| unsigned long tce_ret; |
| |
| rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| return tce_ret; |
| } |
| |
| #ifdef CONFIG_PCI |
| static void iommu_table_setparms(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl) |
| { |
| struct device_node *node; |
| const unsigned long *basep; |
| const u32 *sizep; |
| |
| node = phb->dn; |
| |
| basep = of_get_property(node, "linux,tce-base", NULL); |
| sizep = of_get_property(node, "linux,tce-size", NULL); |
| if (basep == NULL || sizep == NULL) { |
| printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " |
| "missing tce entries !\n", dn->full_name); |
| return; |
| } |
| |
| tbl->it_base = (unsigned long)__va(*basep); |
| |
| if (!is_kdump_kernel()) |
| memset((void *)tbl->it_base, 0, *sizep); |
| |
| tbl->it_busno = phb->bus->number; |
| |
| /* Units of tce entries */ |
| tbl->it_offset = phb->dma_window_base_cur >> IOMMU_PAGE_SHIFT; |
| |
| /* Test if we are going over 2GB of DMA space */ |
| if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { |
| udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| } |
| |
| phb->dma_window_base_cur += phb->dma_window_size; |
| |
| /* Set the tce table size - measured in entries */ |
| tbl->it_size = phb->dma_window_size >> IOMMU_PAGE_SHIFT; |
| |
| tbl->it_index = 0; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| } |
| |
| /* |
| * iommu_table_setparms_lpar |
| * |
| * Function: On pSeries LPAR systems, return TCE table info, given a pci bus. |
| */ |
| static void iommu_table_setparms_lpar(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl, |
| const void *dma_window, |
| int bussubno) |
| { |
| unsigned long offset, size; |
| |
| tbl->it_busno = bussubno; |
| of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size); |
| |
| tbl->it_base = 0; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; |
| tbl->it_size = size >> IOMMU_PAGE_SHIFT; |
| } |
| |
| static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| struct device_node *isa_dn, *isa_dn_orig; |
| struct device_node *tmp; |
| struct pci_dn *pci; |
| int children; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); |
| |
| if (bus->self) { |
| /* This is not a root bus, any setup will be done for the |
| * device-side of the bridge in iommu_dev_setup_pSeries(). |
| */ |
| return; |
| } |
| pci = PCI_DN(dn); |
| |
| /* Check if the ISA bus on the system is under |
| * this PHB. |
| */ |
| isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); |
| |
| while (isa_dn && isa_dn != dn) |
| isa_dn = isa_dn->parent; |
| |
| if (isa_dn_orig) |
| of_node_put(isa_dn_orig); |
| |
| /* Count number of direct PCI children of the PHB. */ |
| for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) |
| children++; |
| |
| pr_debug("Children: %d\n", children); |
| |
| /* Calculate amount of DMA window per slot. Each window must be |
| * a power of two (due to pci_alloc_consistent requirements). |
| * |
| * Keep 256MB aside for PHBs with ISA. |
| */ |
| |
| if (!isa_dn) { |
| /* No ISA/IDE - just set window size and return */ |
| pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ |
| |
| while (pci->phb->dma_window_size * children > 0x80000000ul) |
| pci->phb->dma_window_size >>= 1; |
| pr_debug("No ISA/IDE, window size is 0x%lx\n", |
| pci->phb->dma_window_size); |
| pci->phb->dma_window_base_cur = 0; |
| |
| return; |
| } |
| |
| /* If we have ISA, then we probably have an IDE |
| * controller too. Allocate a 128MB table but |
| * skip the first 128MB to avoid stepping on ISA |
| * space. |
| */ |
| pci->phb->dma_window_size = 0x8000000ul; |
| pci->phb->dma_window_base_cur = 0x8000000ul; |
| |
| tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| pci->phb->node); |
| |
| iommu_table_setparms(pci->phb, dn, tbl); |
| pci->iommu_table = iommu_init_table(tbl, pci->phb->node); |
| |
| /* Divide the rest (1.75GB) among the children */ |
| pci->phb->dma_window_size = 0x80000000ul; |
| while (pci->phb->dma_window_size * children > 0x70000000ul) |
| pci->phb->dma_window_size >>= 1; |
| |
| pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size); |
| } |
| |
| |
| static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) |
| { |
| struct iommu_table *tbl; |
| struct device_node *dn, *pdn; |
| struct pci_dn *ppci; |
| const void *dma_window = NULL; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", |
| dn->full_name); |
| |
| /* Find nearest ibm,dma-window, walking up the device tree */ |
| for (pdn = dn; pdn != NULL; pdn = pdn->parent) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window != NULL) |
| break; |
| } |
| |
| if (dma_window == NULL) { |
| pr_debug(" no ibm,dma-window property !\n"); |
| return; |
| } |
| |
| ppci = PCI_DN(pdn); |
| |
| pr_debug(" parent is %s, iommu_table: 0x%p\n", |
| pdn->full_name, ppci->iommu_table); |
| |
| if (!ppci->iommu_table) { |
| tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| ppci->phb->node); |
| iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window, |
| bus->number); |
| ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node); |
| pr_debug(" created table: %p\n", ppci->iommu_table); |
| } |
| |
| if (pdn != dn) |
| PCI_DN(dn)->iommu_table = ppci->iommu_table; |
| } |
| |
| |
| static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| |
| pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); |
| |
| dn = dev->dev.archdata.of_node; |
| |
| /* If we're the direct child of a root bus, then we need to allocate |
| * an iommu table ourselves. The bus setup code should have setup |
| * the window sizes already. |
| */ |
| if (!dev->bus->self) { |
| struct pci_controller *phb = PCI_DN(dn)->phb; |
| |
| pr_debug(" --> first child, no bridge. Allocating iommu table.\n"); |
| tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| phb->node); |
| iommu_table_setparms(phb, dn, tbl); |
| PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node); |
| dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table; |
| return; |
| } |
| |
| /* If this device is further down the bus tree, search upwards until |
| * an already allocated iommu table is found and use that. |
| */ |
| |
| while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) |
| dn = dn->parent; |
| |
| if (dn && PCI_DN(dn)) |
| dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table; |
| else |
| printk(KERN_WARNING "iommu: Device %s has no iommu table\n", |
| pci_name(dev)); |
| } |
| |
| static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) |
| { |
| struct device_node *pdn, *dn; |
| struct iommu_table *tbl; |
| const void *dma_window = NULL; |
| struct pci_dn *pci; |
| |
| pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); |
| |
| /* dev setup for LPAR is a little tricky, since the device tree might |
| * contain the dma-window properties per-device and not neccesarily |
| * for the bus. So we need to search upwards in the tree until we |
| * either hit a dma-window property, OR find a parent with a table |
| * already allocated. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| pr_debug(" node is %s\n", dn->full_name); |
| |
| for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; |
| pdn = pdn->parent) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window) |
| break; |
| } |
| |
| if (!pdn || !PCI_DN(pdn)) { |
| printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: " |
| "no DMA window found for pci dev=%s dn=%s\n", |
| pci_name(dev), dn? dn->full_name : "<null>"); |
| return; |
| } |
| pr_debug(" parent is %s\n", pdn->full_name); |
| |
| /* Check for parent == NULL so we don't try to setup the empty EADS |
| * slots on POWER4 machines. |
| */ |
| if (dma_window == NULL || pdn->parent == NULL) { |
| pr_debug(" no dma window for device, linking to parent\n"); |
| dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table; |
| return; |
| } |
| |
| pci = PCI_DN(pdn); |
| if (!pci->iommu_table) { |
| tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| pci->phb->node); |
| iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window, |
| pci->phb->bus->number); |
| pci->iommu_table = iommu_init_table(tbl, pci->phb->node); |
| pr_debug(" created table: %p\n", pci->iommu_table); |
| } else { |
| pr_debug(" found DMA window, table: %p\n", pci->iommu_table); |
| } |
| |
| dev->dev.archdata.dma_data = pci->iommu_table; |
| } |
| #else /* CONFIG_PCI */ |
| #define pci_dma_bus_setup_pSeries NULL |
| #define pci_dma_dev_setup_pSeries NULL |
| #define pci_dma_bus_setup_pSeriesLP NULL |
| #define pci_dma_dev_setup_pSeriesLP NULL |
| #endif /* !CONFIG_PCI */ |
| |
| static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) |
| { |
| int err = NOTIFY_OK; |
| struct device_node *np = node; |
| struct pci_dn *pci = PCI_DN(np); |
| |
| switch (action) { |
| case PSERIES_RECONFIG_REMOVE: |
| if (pci && pci->iommu_table && |
| of_get_property(np, "ibm,dma-window", NULL)) |
| iommu_free_table(pci->iommu_table, np->full_name); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block iommu_reconfig_nb = { |
| .notifier_call = iommu_reconfig_notifier, |
| }; |
| |
| /* These are called very early. */ |
| void iommu_init_early_pSeries(void) |
| { |
| if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) { |
| /* Direct I/O, IOMMU off */ |
| ppc_md.pci_dma_dev_setup = NULL; |
| ppc_md.pci_dma_bus_setup = NULL; |
| set_pci_dma_ops(&dma_direct_ops); |
| return; |
| } |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) { |
| if (firmware_has_feature(FW_FEATURE_MULTITCE)) { |
| ppc_md.tce_build = tce_buildmulti_pSeriesLP; |
| ppc_md.tce_free = tce_freemulti_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeriesLP; |
| ppc_md.tce_free = tce_free_pSeriesLP; |
| } |
| ppc_md.tce_get = tce_get_pSeriesLP; |
| ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP; |
| ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeries; |
| ppc_md.tce_free = tce_free_pSeries; |
| ppc_md.tce_get = tce_get_pseries; |
| ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeries; |
| ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeries; |
| } |
| |
| |
| pSeries_reconfig_notifier_register(&iommu_reconfig_nb); |
| |
| set_pci_dma_ops(&dma_iommu_ops); |
| } |
| |