| /* |
| * linux/arch/arm/plat-omap/mcbsp.c |
| * |
| * Copyright (C) 2004 Nokia Corporation |
| * Author: Samuel Ortiz <samuel.ortiz@nokia.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Multichannel mode not supported. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/wait.h> |
| #include <linux/completion.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #include <asm/arch/dma.h> |
| #include <asm/arch/mux.h> |
| #include <asm/arch/irqs.h> |
| #include <asm/arch/dsp_common.h> |
| #include <asm/arch/mcbsp.h> |
| |
| #ifdef CONFIG_MCBSP_DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) do { } while (0) |
| #endif |
| |
| struct omap_mcbsp { |
| u32 io_base; |
| u8 id; |
| u8 free; |
| omap_mcbsp_word_length rx_word_length; |
| omap_mcbsp_word_length tx_word_length; |
| |
| omap_mcbsp_io_type_t io_type; /* IRQ or poll */ |
| /* IRQ based TX/RX */ |
| int rx_irq; |
| int tx_irq; |
| |
| /* DMA stuff */ |
| u8 dma_rx_sync; |
| short dma_rx_lch; |
| u8 dma_tx_sync; |
| short dma_tx_lch; |
| |
| /* Completion queues */ |
| struct completion tx_irq_completion; |
| struct completion rx_irq_completion; |
| struct completion tx_dma_completion; |
| struct completion rx_dma_completion; |
| |
| spinlock_t lock; |
| }; |
| |
| static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; |
| #ifdef CONFIG_ARCH_OMAP1 |
| static struct clk *mcbsp_dsp_ck = 0; |
| static struct clk *mcbsp_api_ck = 0; |
| static struct clk *mcbsp_dspxor_ck = 0; |
| #endif |
| #ifdef CONFIG_ARCH_OMAP2 |
| static struct clk *mcbsp1_ick = 0; |
| static struct clk *mcbsp1_fck = 0; |
| static struct clk *mcbsp2_ick = 0; |
| static struct clk *mcbsp2_fck = 0; |
| #endif |
| |
| static void omap_mcbsp_dump_reg(u8 id) |
| { |
| DBG("**** MCBSP%d regs ****\n", mcbsp[id].id); |
| DBG("DRR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2)); |
| DBG("DRR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1)); |
| DBG("DXR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2)); |
| DBG("DXR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1)); |
| DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2)); |
| DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1)); |
| DBG("RCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2)); |
| DBG("RCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1)); |
| DBG("XCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2)); |
| DBG("XCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1)); |
| DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2)); |
| DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1)); |
| DBG("PCR0: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0)); |
| DBG("***********************\n"); |
| } |
| |
| static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_tx = dev_id; |
| |
| DBG("TX IRQ callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); |
| |
| complete(&mcbsp_tx->tx_irq_completion); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_rx = dev_id; |
| |
| DBG("RX IRQ callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); |
| |
| complete(&mcbsp_rx->rx_irq_completion); |
| return IRQ_HANDLED; |
| } |
| |
| static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) |
| { |
| struct omap_mcbsp *mcbsp_dma_tx = data; |
| |
| DBG("TX DMA callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); |
| |
| /* We can free the channels */ |
| omap_free_dma(mcbsp_dma_tx->dma_tx_lch); |
| mcbsp_dma_tx->dma_tx_lch = -1; |
| |
| complete(&mcbsp_dma_tx->tx_dma_completion); |
| } |
| |
| static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) |
| { |
| struct omap_mcbsp *mcbsp_dma_rx = data; |
| |
| DBG("RX DMA callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); |
| |
| /* We can free the channels */ |
| omap_free_dma(mcbsp_dma_rx->dma_rx_lch); |
| mcbsp_dma_rx->dma_rx_lch = -1; |
| |
| complete(&mcbsp_dma_rx->rx_dma_completion); |
| } |
| |
| |
| /* |
| * omap_mcbsp_config simply write a config to the |
| * appropriate McBSP. |
| * You either call this function or set the McBSP registers |
| * by yourself before calling omap_mcbsp_start(). |
| */ |
| |
| void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config) |
| { |
| u32 io_base = mcbsp[id].io_base; |
| |
| DBG("OMAP-McBSP: McBSP%d io_base: 0x%8x\n", id+1, io_base); |
| |
| /* We write the given config */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1); |
| OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2); |
| OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1); |
| OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2); |
| OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1); |
| OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2); |
| OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1); |
| OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); |
| OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); |
| OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); |
| } |
| |
| |
| |
| static int omap_mcbsp_check(unsigned int id) |
| { |
| if (cpu_is_omap730()) { |
| if (id > OMAP_MAX_MCBSP_COUNT - 1) { |
| printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); |
| return -1; |
| } |
| return 0; |
| } |
| |
| if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) { |
| if (id > OMAP_MAX_MCBSP_COUNT) { |
| printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); |
| return -1; |
| } |
| return 0; |
| } |
| |
| return -1; |
| } |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| static void omap_mcbsp_dsp_request(void) |
| { |
| if (cpu_is_omap15xx() || cpu_is_omap16xx()) { |
| clk_enable(mcbsp_dsp_ck); |
| clk_enable(mcbsp_api_ck); |
| |
| /* enable 12MHz clock to mcbsp 1 & 3 */ |
| clk_enable(mcbsp_dspxor_ck); |
| |
| /* |
| * DSP external peripheral reset |
| * FIXME: This should be moved to dsp code |
| */ |
| __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, |
| DSP_RSTCT2); |
| } |
| } |
| |
| static void omap_mcbsp_dsp_free(void) |
| { |
| if (cpu_is_omap15xx() || cpu_is_omap16xx()) { |
| clk_disable(mcbsp_dspxor_ck); |
| clk_disable(mcbsp_dsp_ck); |
| clk_disable(mcbsp_api_ck); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP2 |
| static void omap2_mcbsp2_mux_setup(void) |
| { |
| if (cpu_is_omap2420()) { |
| omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); |
| omap_cfg_reg(R14_24XX_MCBSP2_FSX); |
| omap_cfg_reg(W15_24XX_MCBSP2_DR); |
| omap_cfg_reg(V15_24XX_MCBSP2_DX); |
| omap_cfg_reg(V14_24XX_GPIO117); |
| } |
| /* |
| * Need to add MUX settings for OMAP 2430 SDP |
| */ |
| } |
| #endif |
| |
| /* |
| * We can choose between IRQ based or polled IO. |
| * This needs to be called before omap_mcbsp_request(). |
| */ |
| int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) |
| { |
| if (omap_mcbsp_check(id) < 0) |
| return -EINVAL; |
| |
| spin_lock(&mcbsp[id].lock); |
| |
| if (!mcbsp[id].free) { |
| printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1); |
| spin_unlock(&mcbsp[id].lock); |
| return -EINVAL; |
| } |
| |
| mcbsp[id].io_type = io_type; |
| |
| spin_unlock(&mcbsp[id].lock); |
| |
| return 0; |
| } |
| |
| int omap_mcbsp_request(unsigned int id) |
| { |
| int err; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return -EINVAL; |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| /* |
| * On 1510, 1610 and 1710, McBSP1 and McBSP3 |
| * are DSP public peripherals. |
| */ |
| if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) |
| omap_mcbsp_dsp_request(); |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP2 |
| if (cpu_is_omap24xx()) { |
| if (id == OMAP_MCBSP1) { |
| clk_enable(mcbsp1_ick); |
| clk_enable(mcbsp1_fck); |
| } else { |
| clk_enable(mcbsp2_ick); |
| clk_enable(mcbsp2_fck); |
| } |
| } |
| #endif |
| |
| spin_lock(&mcbsp[id].lock); |
| if (!mcbsp[id].free) { |
| printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1); |
| spin_unlock(&mcbsp[id].lock); |
| return -1; |
| } |
| |
| mcbsp[id].free = 0; |
| spin_unlock(&mcbsp[id].lock); |
| |
| if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { |
| /* We need to get IRQs here */ |
| err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0, |
| "McBSP", |
| (void *) (&mcbsp[id])); |
| if (err != 0) { |
| printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n", |
| mcbsp[id].tx_irq, mcbsp[id].id); |
| return err; |
| } |
| |
| init_completion(&(mcbsp[id].tx_irq_completion)); |
| |
| |
| err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0, |
| "McBSP", |
| (void *) (&mcbsp[id])); |
| if (err != 0) { |
| printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n", |
| mcbsp[id].rx_irq, mcbsp[id].id); |
| free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); |
| return err; |
| } |
| |
| init_completion(&(mcbsp[id].rx_irq_completion)); |
| } |
| |
| return 0; |
| |
| } |
| |
| void omap_mcbsp_free(unsigned int id) |
| { |
| if (omap_mcbsp_check(id) < 0) |
| return; |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| if (cpu_class_is_omap1()) { |
| if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) |
| omap_mcbsp_dsp_free(); |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP2 |
| if (cpu_is_omap24xx()) { |
| if (id == OMAP_MCBSP1) { |
| clk_disable(mcbsp1_ick); |
| clk_disable(mcbsp1_fck); |
| } else { |
| clk_disable(mcbsp2_ick); |
| clk_disable(mcbsp2_fck); |
| } |
| } |
| #endif |
| |
| spin_lock(&mcbsp[id].lock); |
| if (mcbsp[id].free) { |
| printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1); |
| spin_unlock(&mcbsp[id].lock); |
| return; |
| } |
| |
| mcbsp[id].free = 1; |
| spin_unlock(&mcbsp[id].lock); |
| |
| if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { |
| /* Free IRQs */ |
| free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); |
| free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); |
| } |
| } |
| |
| /* |
| * Here we start the McBSP, by enabling the sample |
| * generator, both transmitter and receivers, |
| * and the frame sync. |
| */ |
| void omap_mcbsp_start(unsigned int id) |
| { |
| u32 io_base; |
| u16 w; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return; |
| |
| io_base = mcbsp[id].io_base; |
| |
| mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7); |
| mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7); |
| |
| /* Start the sample generator */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); |
| |
| /* Enable transmitter and receiver */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1); |
| |
| w = OMAP_MCBSP_READ(io_base, SPCR1); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1); |
| |
| udelay(100); |
| |
| /* Start frame sync */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); |
| |
| /* Dump McBSP Regs */ |
| omap_mcbsp_dump_reg(id); |
| |
| } |
| |
| void omap_mcbsp_stop(unsigned int id) |
| { |
| u32 io_base; |
| u16 w; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return; |
| |
| io_base = mcbsp[id].io_base; |
| |
| /* Reset transmitter */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1)); |
| |
| /* Reset receiver */ |
| w = OMAP_MCBSP_READ(io_base, SPCR1); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1)); |
| |
| /* Reset the sample rate generator */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); |
| } |
| |
| |
| /* polled mcbsp i/o operations */ |
| int omap_mcbsp_pollwrite(unsigned int id, u16 buf) |
| { |
| u32 base = mcbsp[id].io_base; |
| writew(buf, base + OMAP_MCBSP_REG_DXR1); |
| /* if frame sync error - clear the error */ |
| if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { |
| /* clear error */ |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR), |
| base + OMAP_MCBSP_REG_SPCR2); |
| /* resend */ |
| return -1; |
| } else { |
| /* wait for transmit confirmation */ |
| int attemps = 0; |
| while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) { |
| if (attemps++ > 1000) { |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) & |
| (~XRST), |
| base + OMAP_MCBSP_REG_SPCR2); |
| udelay(10); |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) | |
| (XRST), |
| base + OMAP_MCBSP_REG_SPCR2); |
| udelay(10); |
| printk(KERN_ERR |
| " Could not write to McBSP Register\n"); |
| return -2; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| int omap_mcbsp_pollread(unsigned int id, u16 * buf) |
| { |
| u32 base = mcbsp[id].io_base; |
| /* if frame sync error - clear the error */ |
| if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { |
| /* clear error */ |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR), |
| base + OMAP_MCBSP_REG_SPCR1); |
| /* resend */ |
| return -1; |
| } else { |
| /* wait for recieve confirmation */ |
| int attemps = 0; |
| while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) { |
| if (attemps++ > 1000) { |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) & |
| (~RRST), |
| base + OMAP_MCBSP_REG_SPCR1); |
| udelay(10); |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) | |
| (RRST), |
| base + OMAP_MCBSP_REG_SPCR1); |
| udelay(10); |
| printk(KERN_ERR |
| " Could not read from McBSP Register\n"); |
| return -2; |
| } |
| } |
| } |
| *buf = readw(base + OMAP_MCBSP_REG_DRR1); |
| return 0; |
| } |
| |
| /* |
| * IRQ based word transmission. |
| */ |
| void omap_mcbsp_xmit_word(unsigned int id, u32 word) |
| { |
| u32 io_base; |
| omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return; |
| |
| io_base = mcbsp[id].io_base; |
| |
| wait_for_completion(&(mcbsp[id].tx_irq_completion)); |
| |
| if (word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); |
| } |
| |
| u32 omap_mcbsp_recv_word(unsigned int id) |
| { |
| u32 io_base; |
| u16 word_lsb, word_msb = 0; |
| omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return -EINVAL; |
| |
| io_base = mcbsp[id].io_base; |
| |
| wait_for_completion(&(mcbsp[id].rx_irq_completion)); |
| |
| if (word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| return (word_lsb | (word_msb << 16)); |
| } |
| |
| |
| int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) |
| { |
| u32 io_base = mcbsp[id].io_base; |
| omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length; |
| omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length; |
| u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; |
| |
| if (tx_word_length != rx_word_length) |
| return -EINVAL; |
| |
| /* First we wait for the transmitter to be ready */ |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| while (!(spcr2 & XRDY)) { |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| if (attempts++ > 1000) { |
| /* We must reset the transmitter */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); |
| udelay(10); |
| printk("McBSP transmitter not ready\n"); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Now we can push the data */ |
| if (tx_word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); |
| |
| /* We wait for the receiver to be ready */ |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| while (!(spcr1 & RRDY)) { |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| if (attempts++ > 1000) { |
| /* We must reset the receiver */ |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); |
| udelay(10); |
| printk("McBSP receiver not ready\n"); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Receiver is ready, let's read the dummy data */ |
| if (rx_word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| return 0; |
| } |
| |
| int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word) |
| { |
| u32 io_base = mcbsp[id].io_base, clock_word = 0; |
| omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length; |
| omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length; |
| u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; |
| |
| if (tx_word_length != rx_word_length) |
| return -EINVAL; |
| |
| /* First we wait for the transmitter to be ready */ |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| while (!(spcr2 & XRDY)) { |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| if (attempts++ > 1000) { |
| /* We must reset the transmitter */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); |
| udelay(10); |
| printk("McBSP transmitter not ready\n"); |
| return -EAGAIN; |
| } |
| } |
| |
| /* We first need to enable the bus clock */ |
| if (tx_word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff); |
| |
| /* We wait for the receiver to be ready */ |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| while (!(spcr1 & RRDY)) { |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| if (attempts++ > 1000) { |
| /* We must reset the receiver */ |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); |
| udelay(10); |
| printk("McBSP receiver not ready\n"); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Receiver is ready, there is something for us */ |
| if (rx_word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| word[0] = (word_lsb | (word_msb << 16)); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Simple DMA based buffer rx/tx routines. |
| * Nothing fancy, just a single buffer tx/rx through DMA. |
| * The DMA resources are released once the transfer is done. |
| * For anything fancier, you should use your own customized DMA |
| * routines and callbacks. |
| */ |
| int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) |
| { |
| int dma_tx_ch; |
| int src_port = 0; |
| int dest_port = 0; |
| int sync_dev = 0; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return -EINVAL; |
| |
| if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback, |
| &mcbsp[id], |
| &dma_tx_ch)) { |
| printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1); |
| return -EAGAIN; |
| } |
| mcbsp[id].dma_tx_lch = dma_tx_ch; |
| |
| DBG("TX DMA on channel %d\n", dma_tx_ch); |
| |
| init_completion(&(mcbsp[id].tx_dma_completion)); |
| |
| if (cpu_class_is_omap1()) { |
| src_port = OMAP_DMA_PORT_TIPB; |
| dest_port = OMAP_DMA_PORT_EMIFF; |
| } |
| if (cpu_is_omap24xx()) |
| sync_dev = mcbsp[id].dma_tx_sync; |
| |
| omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, |
| OMAP_DMA_DATA_TYPE_S16, |
| length >> 1, 1, |
| OMAP_DMA_SYNC_ELEMENT, |
| sync_dev, 0); |
| |
| omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, |
| src_port, |
| OMAP_DMA_AMODE_CONSTANT, |
| mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, |
| 0, 0); |
| |
| omap_set_dma_src_params(mcbsp[id].dma_tx_lch, |
| dest_port, |
| OMAP_DMA_AMODE_POST_INC, |
| buffer, |
| 0, 0); |
| |
| omap_start_dma(mcbsp[id].dma_tx_lch); |
| wait_for_completion(&(mcbsp[id].tx_dma_completion)); |
| return 0; |
| } |
| |
| |
| int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) |
| { |
| int dma_rx_ch; |
| int src_port = 0; |
| int dest_port = 0; |
| int sync_dev = 0; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return -EINVAL; |
| |
| if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback, |
| &mcbsp[id], |
| &dma_rx_ch)) { |
| printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1); |
| return -EAGAIN; |
| } |
| mcbsp[id].dma_rx_lch = dma_rx_ch; |
| |
| DBG("RX DMA on channel %d\n", dma_rx_ch); |
| |
| init_completion(&(mcbsp[id].rx_dma_completion)); |
| |
| if (cpu_class_is_omap1()) { |
| src_port = OMAP_DMA_PORT_TIPB; |
| dest_port = OMAP_DMA_PORT_EMIFF; |
| } |
| if (cpu_is_omap24xx()) |
| sync_dev = mcbsp[id].dma_rx_sync; |
| |
| omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, |
| OMAP_DMA_DATA_TYPE_S16, |
| length >> 1, 1, |
| OMAP_DMA_SYNC_ELEMENT, |
| sync_dev, 0); |
| |
| omap_set_dma_src_params(mcbsp[id].dma_rx_lch, |
| src_port, |
| OMAP_DMA_AMODE_CONSTANT, |
| mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, |
| 0, 0); |
| |
| omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, |
| dest_port, |
| OMAP_DMA_AMODE_POST_INC, |
| buffer, |
| 0, 0); |
| |
| omap_start_dma(mcbsp[id].dma_rx_lch); |
| wait_for_completion(&(mcbsp[id].rx_dma_completion)); |
| return 0; |
| } |
| |
| |
| /* |
| * SPI wrapper. |
| * Since SPI setup is much simpler than the generic McBSP one, |
| * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. |
| * Once this is done, you can call omap_mcbsp_start(). |
| */ |
| void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg) |
| { |
| struct omap_mcbsp_reg_cfg mcbsp_cfg; |
| |
| if (omap_mcbsp_check(id) < 0) |
| return; |
| |
| memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); |
| |
| /* SPI has only one frame */ |
| mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); |
| mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); |
| |
| /* Clock stop mode */ |
| if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) |
| mcbsp_cfg.spcr1 |= (1 << 12); |
| else |
| mcbsp_cfg.spcr1 |= (3 << 11); |
| |
| /* Set clock parities */ |
| if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) |
| mcbsp_cfg.pcr0 |= CLKRP; |
| else |
| mcbsp_cfg.pcr0 &= ~CLKRP; |
| |
| if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) |
| mcbsp_cfg.pcr0 &= ~CLKXP; |
| else |
| mcbsp_cfg.pcr0 |= CLKXP; |
| |
| /* Set SCLKME to 0 and CLKSM to 1 */ |
| mcbsp_cfg.pcr0 &= ~SCLKME; |
| mcbsp_cfg.srgr2 |= CLKSM; |
| |
| /* Set FSXP */ |
| if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) |
| mcbsp_cfg.pcr0 &= ~FSXP; |
| else |
| mcbsp_cfg.pcr0 |= FSXP; |
| |
| if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { |
| mcbsp_cfg.pcr0 |= CLKXM; |
| mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1); |
| mcbsp_cfg.pcr0 |= FSXM; |
| mcbsp_cfg.srgr2 &= ~FSGM; |
| mcbsp_cfg.xcr2 |= XDATDLY(1); |
| mcbsp_cfg.rcr2 |= RDATDLY(1); |
| } |
| else { |
| mcbsp_cfg.pcr0 &= ~CLKXM; |
| mcbsp_cfg.srgr1 |= CLKGDV(1); |
| mcbsp_cfg.pcr0 &= ~FSXM; |
| mcbsp_cfg.xcr2 &= ~XDATDLY(3); |
| mcbsp_cfg.rcr2 &= ~RDATDLY(3); |
| } |
| |
| mcbsp_cfg.xcr2 &= ~XPHASE; |
| mcbsp_cfg.rcr2 &= ~RPHASE; |
| |
| omap_mcbsp_config(id, &mcbsp_cfg); |
| } |
| |
| |
| /* |
| * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. |
| * 730 has only 2 McBSP, and both of them are MPU peripherals. |
| */ |
| struct omap_mcbsp_info { |
| u32 virt_base; |
| u8 dma_rx_sync, dma_tx_sync; |
| u16 rx_irq, tx_irq; |
| }; |
| |
| #ifdef CONFIG_ARCH_OMAP730 |
| static const struct omap_mcbsp_info mcbsp_730[] = { |
| [0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE), |
| .dma_rx_sync = OMAP_DMA_MCBSP1_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP1_TX, |
| .rx_irq = INT_730_McBSP1RX, |
| .tx_irq = INT_730_McBSP1TX }, |
| [1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE), |
| .dma_rx_sync = OMAP_DMA_MCBSP3_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP3_TX, |
| .rx_irq = INT_730_McBSP2RX, |
| .tx_irq = INT_730_McBSP2TX }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP15XX |
| static const struct omap_mcbsp_info mcbsp_1510[] = { |
| [0] = { .virt_base = OMAP1510_MCBSP1_BASE, |
| .dma_rx_sync = OMAP_DMA_MCBSP1_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP1_TX, |
| .rx_irq = INT_McBSP1RX, |
| .tx_irq = INT_McBSP1TX }, |
| [1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), |
| .dma_rx_sync = OMAP_DMA_MCBSP2_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP2_TX, |
| .rx_irq = INT_1510_SPI_RX, |
| .tx_irq = INT_1510_SPI_TX }, |
| [2] = { .virt_base = OMAP1510_MCBSP3_BASE, |
| .dma_rx_sync = OMAP_DMA_MCBSP3_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP3_TX, |
| .rx_irq = INT_McBSP3RX, |
| .tx_irq = INT_McBSP3TX }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP16XX) |
| static const struct omap_mcbsp_info mcbsp_1610[] = { |
| [0] = { .virt_base = OMAP1610_MCBSP1_BASE, |
| .dma_rx_sync = OMAP_DMA_MCBSP1_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP1_TX, |
| .rx_irq = INT_McBSP1RX, |
| .tx_irq = INT_McBSP1TX }, |
| [1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), |
| .dma_rx_sync = OMAP_DMA_MCBSP2_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP2_TX, |
| .rx_irq = INT_1610_McBSP2_RX, |
| .tx_irq = INT_1610_McBSP2_TX }, |
| [2] = { .virt_base = OMAP1610_MCBSP3_BASE, |
| .dma_rx_sync = OMAP_DMA_MCBSP3_RX, |
| .dma_tx_sync = OMAP_DMA_MCBSP3_TX, |
| .rx_irq = INT_McBSP3RX, |
| .tx_irq = INT_McBSP3TX }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP24XX) |
| static const struct omap_mcbsp_info mcbsp_24xx[] = { |
| [0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), |
| .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, |
| .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, |
| .rx_irq = INT_24XX_MCBSP1_IRQ_RX, |
| .tx_irq = INT_24XX_MCBSP1_IRQ_TX, |
| }, |
| [1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), |
| .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, |
| .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, |
| .rx_irq = INT_24XX_MCBSP2_IRQ_RX, |
| .tx_irq = INT_24XX_MCBSP2_IRQ_TX, |
| }, |
| }; |
| #endif |
| |
| static int __init omap_mcbsp_init(void) |
| { |
| int mcbsp_count = 0, i; |
| static const struct omap_mcbsp_info *mcbsp_info; |
| |
| printk("Initializing OMAP McBSP system\n"); |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| mcbsp_dsp_ck = clk_get(0, "dsp_ck"); |
| if (IS_ERR(mcbsp_dsp_ck)) { |
| printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n"); |
| return PTR_ERR(mcbsp_dsp_ck); |
| } |
| mcbsp_api_ck = clk_get(0, "api_ck"); |
| if (IS_ERR(mcbsp_api_ck)) { |
| printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n"); |
| return PTR_ERR(mcbsp_api_ck); |
| } |
| mcbsp_dspxor_ck = clk_get(0, "dspxor_ck"); |
| if (IS_ERR(mcbsp_dspxor_ck)) { |
| printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n"); |
| return PTR_ERR(mcbsp_dspxor_ck); |
| } |
| #endif |
| #ifdef CONFIG_ARCH_OMAP2 |
| mcbsp1_ick = clk_get(0, "mcbsp1_ick"); |
| if (IS_ERR(mcbsp1_ick)) { |
| printk(KERN_ERR "mcbsp: could not acquire mcbsp1_ick handle.\n"); |
| return PTR_ERR(mcbsp1_ick); |
| } |
| mcbsp1_fck = clk_get(0, "mcbsp1_fck"); |
| if (IS_ERR(mcbsp1_fck)) { |
| printk(KERN_ERR "mcbsp: could not acquire mcbsp1_fck handle.\n"); |
| return PTR_ERR(mcbsp1_fck); |
| } |
| mcbsp2_ick = clk_get(0, "mcbsp2_ick"); |
| if (IS_ERR(mcbsp2_ick)) { |
| printk(KERN_ERR "mcbsp: could not acquire mcbsp2_ick handle.\n"); |
| return PTR_ERR(mcbsp2_ick); |
| } |
| mcbsp2_fck = clk_get(0, "mcbsp2_fck"); |
| if (IS_ERR(mcbsp2_fck)) { |
| printk(KERN_ERR "mcbsp: could not acquire mcbsp2_fck handle.\n"); |
| return PTR_ERR(mcbsp2_fck); |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP730 |
| if (cpu_is_omap730()) { |
| mcbsp_info = mcbsp_730; |
| mcbsp_count = ARRAY_SIZE(mcbsp_730); |
| } |
| #endif |
| #ifdef CONFIG_ARCH_OMAP15XX |
| if (cpu_is_omap15xx()) { |
| mcbsp_info = mcbsp_1510; |
| mcbsp_count = ARRAY_SIZE(mcbsp_1510); |
| } |
| #endif |
| #if defined(CONFIG_ARCH_OMAP16XX) |
| if (cpu_is_omap16xx()) { |
| mcbsp_info = mcbsp_1610; |
| mcbsp_count = ARRAY_SIZE(mcbsp_1610); |
| } |
| #endif |
| #if defined(CONFIG_ARCH_OMAP24XX) |
| if (cpu_is_omap24xx()) { |
| mcbsp_info = mcbsp_24xx; |
| mcbsp_count = ARRAY_SIZE(mcbsp_24xx); |
| omap2_mcbsp2_mux_setup(); |
| } |
| #endif |
| for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) { |
| if (i >= mcbsp_count) { |
| mcbsp[i].io_base = 0; |
| mcbsp[i].free = 0; |
| continue; |
| } |
| mcbsp[i].id = i + 1; |
| mcbsp[i].free = 1; |
| mcbsp[i].dma_tx_lch = -1; |
| mcbsp[i].dma_rx_lch = -1; |
| |
| mcbsp[i].io_base = mcbsp_info[i].virt_base; |
| mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO; /* Default I/O is IRQ based */ |
| mcbsp[i].tx_irq = mcbsp_info[i].tx_irq; |
| mcbsp[i].rx_irq = mcbsp_info[i].rx_irq; |
| mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync; |
| mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync; |
| spin_lock_init(&mcbsp[i].lock); |
| } |
| |
| return 0; |
| } |
| |
| arch_initcall(omap_mcbsp_init); |
| |
| EXPORT_SYMBOL(omap_mcbsp_config); |
| EXPORT_SYMBOL(omap_mcbsp_request); |
| EXPORT_SYMBOL(omap_mcbsp_set_io_type); |
| EXPORT_SYMBOL(omap_mcbsp_free); |
| EXPORT_SYMBOL(omap_mcbsp_start); |
| EXPORT_SYMBOL(omap_mcbsp_stop); |
| EXPORT_SYMBOL(omap_mcbsp_xmit_word); |
| EXPORT_SYMBOL(omap_mcbsp_recv_word); |
| EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); |
| EXPORT_SYMBOL(omap_mcbsp_recv_buffer); |
| EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); |
| EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); |
| EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); |