| /* |
| * arch/arm/plat-orion/time.c |
| * |
| * Marvell Orion SoC timer handling. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| * |
| * Timer 0 is used as free-running clocksource, while timer 1 is |
| * used as clock_event_device. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/clockchips.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <asm/mach/time.h> |
| #include <mach/bridge-regs.h> |
| |
| /* |
| * Number of timer ticks per jiffy. |
| */ |
| static u32 ticks_per_jiffy; |
| |
| |
| /* |
| * Timer block registers. |
| */ |
| #define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) |
| #define TIMER0_EN 0x0001 |
| #define TIMER0_RELOAD_EN 0x0002 |
| #define TIMER1_EN 0x0004 |
| #define TIMER1_RELOAD_EN 0x0008 |
| #define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010) |
| #define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014) |
| #define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018) |
| #define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c) |
| |
| |
| /* |
| * Clocksource handling. |
| */ |
| static cycle_t orion_clksrc_read(void) |
| { |
| return 0xffffffff - readl(TIMER0_VAL); |
| } |
| |
| static struct clocksource orion_clksrc = { |
| .name = "orion_clocksource", |
| .shift = 20, |
| .rating = 300, |
| .read = orion_clksrc_read, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| |
| |
| /* |
| * Clockevent handling. |
| */ |
| static int |
| orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) |
| { |
| unsigned long flags; |
| u32 u; |
| |
| if (delta == 0) |
| return -ETIME; |
| |
| local_irq_save(flags); |
| |
| /* |
| * Clear and enable clockevent timer interrupt. |
| */ |
| writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); |
| |
| u = readl(BRIDGE_MASK); |
| u |= BRIDGE_INT_TIMER1; |
| writel(u, BRIDGE_MASK); |
| |
| /* |
| * Setup new clockevent timer value. |
| */ |
| writel(delta, TIMER1_VAL); |
| |
| /* |
| * Enable the timer. |
| */ |
| u = readl(TIMER_CTRL); |
| u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; |
| writel(u, TIMER_CTRL); |
| |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static void |
| orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) |
| { |
| unsigned long flags; |
| u32 u; |
| |
| local_irq_save(flags); |
| if (mode == CLOCK_EVT_MODE_PERIODIC) { |
| /* |
| * Setup timer to fire at 1/HZ intervals. |
| */ |
| writel(ticks_per_jiffy - 1, TIMER1_RELOAD); |
| writel(ticks_per_jiffy - 1, TIMER1_VAL); |
| |
| /* |
| * Enable timer interrupt. |
| */ |
| u = readl(BRIDGE_MASK); |
| writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK); |
| |
| /* |
| * Enable timer. |
| */ |
| u = readl(TIMER_CTRL); |
| writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL); |
| } else { |
| /* |
| * Disable timer. |
| */ |
| u = readl(TIMER_CTRL); |
| writel(u & ~TIMER1_EN, TIMER_CTRL); |
| |
| /* |
| * Disable timer interrupt. |
| */ |
| u = readl(BRIDGE_MASK); |
| writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK); |
| |
| /* |
| * ACK pending timer interrupt. |
| */ |
| writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); |
| |
| } |
| local_irq_restore(flags); |
| } |
| |
| static struct clock_event_device orion_clkevt = { |
| .name = "orion_tick", |
| .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, |
| .shift = 32, |
| .rating = 300, |
| .set_next_event = orion_clkevt_next_event, |
| .set_mode = orion_clkevt_mode, |
| }; |
| |
| static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) |
| { |
| /* |
| * ACK timer interrupt and call event handler. |
| */ |
| writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); |
| orion_clkevt.event_handler(&orion_clkevt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction orion_timer_irq = { |
| .name = "orion_tick", |
| .flags = IRQF_DISABLED | IRQF_TIMER, |
| .handler = orion_timer_interrupt |
| }; |
| |
| void __init orion_time_init(unsigned int irq, unsigned int tclk) |
| { |
| u32 u; |
| |
| ticks_per_jiffy = (tclk + HZ/2) / HZ; |
| |
| |
| /* |
| * Setup free-running clocksource timer (interrupts |
| * disabled.) |
| */ |
| writel(0xffffffff, TIMER0_VAL); |
| writel(0xffffffff, TIMER0_RELOAD); |
| u = readl(BRIDGE_MASK); |
| writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); |
| u = readl(TIMER_CTRL); |
| writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); |
| orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); |
| clocksource_register(&orion_clksrc); |
| |
| |
| /* |
| * Setup clockevent timer (interrupt-driven.) |
| */ |
| setup_irq(irq, &orion_timer_irq); |
| orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); |
| orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt); |
| orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt); |
| orion_clkevt.cpumask = cpumask_of(0); |
| clockevents_register_device(&orion_clkevt); |
| } |