| /* |
| * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC |
| * with an Embedded Image Signal Processor. |
| * |
| * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@linaro.org> |
| * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee <suapapa@insignal.co.kr> |
| * |
| * Based on s5k6aa and noon010pc30 driver |
| * Copyright (C) 2011, Samsung Electronics Co., Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/crc32.h> |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <asm/unaligned.h> |
| |
| #include <media/media-entity.h> |
| #include <media/i2c/s5k4ecgx.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-mediabus.h> |
| #include <media/v4l2-subdev.h> |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| |
| #define S5K4ECGX_DRIVER_NAME "s5k4ecgx" |
| #define S5K4ECGX_FIRMWARE "s5k4ecgx.bin" |
| |
| /* Firmware revision information */ |
| #define REG_FW_REVISION 0x700001a6 |
| #define REG_FW_VERSION 0x700001a4 |
| #define S5K4ECGX_REVISION_1_1 0x11 |
| #define S5K4ECGX_FW_VERSION 0x4ec0 |
| |
| /* General purpose parameters */ |
| #define REG_USER_BRIGHTNESS 0x7000022c |
| #define REG_USER_CONTRAST 0x7000022e |
| #define REG_USER_SATURATION 0x70000230 |
| |
| #define REG_G_ENABLE_PREV 0x7000023e |
| #define REG_G_ENABLE_PREV_CHG 0x70000240 |
| #define REG_G_NEW_CFG_SYNC 0x7000024a |
| #define REG_G_PREV_IN_WIDTH 0x70000250 |
| #define REG_G_PREV_IN_HEIGHT 0x70000252 |
| #define REG_G_PREV_IN_XOFFS 0x70000254 |
| #define REG_G_PREV_IN_YOFFS 0x70000256 |
| #define REG_G_CAP_IN_WIDTH 0x70000258 |
| #define REG_G_CAP_IN_HEIGHT 0x7000025a |
| #define REG_G_CAP_IN_XOFFS 0x7000025c |
| #define REG_G_CAP_IN_YOFFS 0x7000025e |
| #define REG_G_INPUTS_CHANGE_REQ 0x70000262 |
| #define REG_G_ACTIVE_PREV_CFG 0x70000266 |
| #define REG_G_PREV_CFG_CHG 0x70000268 |
| #define REG_G_PREV_OPEN_AFTER_CH 0x7000026a |
| |
| /* Preview context register sets. n = 0...4. */ |
| #define PREG(n, x) ((n) * 0x30 + (x)) |
| #define REG_P_OUT_WIDTH(n) PREG(n, 0x700002a6) |
| #define REG_P_OUT_HEIGHT(n) PREG(n, 0x700002a8) |
| #define REG_P_FMT(n) PREG(n, 0x700002aa) |
| #define REG_P_PVI_MASK(n) PREG(n, 0x700002b4) |
| #define REG_P_FR_TIME_TYPE(n) PREG(n, 0x700002be) |
| #define FR_TIME_DYNAMIC 0 |
| #define FR_TIME_FIXED 1 |
| #define FR_TIME_FIXED_ACCURATE 2 |
| #define REG_P_FR_TIME_Q_TYPE(n) PREG(n, 0x700002c0) |
| #define FR_TIME_Q_DYNAMIC 0 |
| #define FR_TIME_Q_BEST_FRRATE 1 |
| #define FR_TIME_Q_BEST_QUALITY 2 |
| |
| /* Frame period in 0.1 ms units */ |
| #define REG_P_MAX_FR_TIME(n) PREG(n, 0x700002c2) |
| #define REG_P_MIN_FR_TIME(n) PREG(n, 0x700002c4) |
| #define US_TO_FR_TIME(__t) ((__t) / 100) |
| #define REG_P_PREV_MIRROR(n) PREG(n, 0x700002d0) |
| #define REG_P_CAP_MIRROR(n) PREG(n, 0x700002d2) |
| |
| #define REG_G_PREVZOOM_IN_WIDTH 0x70000494 |
| #define REG_G_PREVZOOM_IN_HEIGHT 0x70000496 |
| #define REG_G_PREVZOOM_IN_XOFFS 0x70000498 |
| #define REG_G_PREVZOOM_IN_YOFFS 0x7000049a |
| #define REG_G_CAPZOOM_IN_WIDTH 0x7000049c |
| #define REG_G_CAPZOOM_IN_HEIGHT 0x7000049e |
| #define REG_G_CAPZOOM_IN_XOFFS 0x700004a0 |
| #define REG_G_CAPZOOM_IN_YOFFS 0x700004a2 |
| |
| /* n = 0...4 */ |
| #define REG_USER_SHARPNESS(n) (0x70000a28 + (n) * 0xb6) |
| |
| /* Reduce sharpness range for user space API */ |
| #define SHARPNESS_DIV 8208 |
| #define TOK_TERM 0xffffffff |
| |
| /* |
| * FIXME: This is copied from s5k6aa, because of no information |
| * in the S5K4ECGX datasheet. |
| * H/W register Interface (0xd0000000 - 0xd0000fff) |
| */ |
| #define AHB_MSB_ADDR_PTR 0xfcfc |
| #define GEN_REG_OFFSH 0xd000 |
| #define REG_CMDWR_ADDRH 0x0028 |
| #define REG_CMDWR_ADDRL 0x002a |
| #define REG_CMDRD_ADDRH 0x002c |
| #define REG_CMDRD_ADDRL 0x002e |
| #define REG_CMDBUF0_ADDR 0x0f12 |
| |
| struct s5k4ecgx_frmsize { |
| struct v4l2_frmsize_discrete size; |
| /* Fixed sensor matrix crop rectangle */ |
| struct v4l2_rect input_window; |
| }; |
| |
| struct regval_list { |
| u32 addr; |
| u16 val; |
| }; |
| |
| /* |
| * TODO: currently only preview is supported and snapshot (capture) |
| * is not implemented yet |
| */ |
| static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = { |
| { |
| .size = { 176, 144 }, |
| .input_window = { 0x00, 0x00, 0x928, 0x780 }, |
| }, { |
| .size = { 352, 288 }, |
| .input_window = { 0x00, 0x00, 0x928, 0x780 }, |
| }, { |
| .size = { 640, 480 }, |
| .input_window = { 0x00, 0x00, 0xa00, 0x780 }, |
| }, { |
| .size = { 720, 480 }, |
| .input_window = { 0x00, 0x00, 0xa00, 0x6a8 }, |
| } |
| }; |
| |
| #define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes) |
| |
| struct s5k4ecgx_pixfmt { |
| u32 code; |
| u32 colorspace; |
| /* REG_TC_PCFG_Format register value */ |
| u16 reg_p_format; |
| }; |
| |
| /* By default value, output from sensor will be YUV422 0-255 */ |
| static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = { |
| { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 }, |
| }; |
| |
| static const char * const s5k4ecgx_supply_names[] = { |
| /* |
| * Usually 2.8V is used for analog power (vdda) |
| * and digital IO (vddio, vdddcore) |
| */ |
| "vdda", |
| "vddio", |
| "vddcore", |
| "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */ |
| }; |
| |
| #define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names) |
| |
| enum s5k4ecgx_gpio_id { |
| STBY, |
| RST, |
| GPIO_NUM, |
| }; |
| |
| struct s5k4ecgx { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler handler; |
| |
| struct s5k4ecgx_platform_data *pdata; |
| const struct s5k4ecgx_pixfmt *curr_pixfmt; |
| const struct s5k4ecgx_frmsize *curr_frmsize; |
| struct mutex lock; |
| u8 streaming; |
| u8 set_params; |
| |
| struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES]; |
| struct s5k4ecgx_gpio gpio[GPIO_NUM]; |
| }; |
| |
| static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct s5k4ecgx, sd); |
| } |
| |
| static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val) |
| { |
| u8 wbuf[2] = { addr >> 8, addr & 0xff }; |
| struct i2c_msg msg[2]; |
| u8 rbuf[2]; |
| int ret; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = 0; |
| msg[0].len = 2; |
| msg[0].buf = wbuf; |
| |
| msg[1].addr = client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].len = 2; |
| msg[1].buf = rbuf; |
| |
| ret = i2c_transfer(client->adapter, msg, 2); |
| *val = be16_to_cpu(*((__be16 *)rbuf)); |
| |
| v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val); |
| |
| return ret == 2 ? 0 : ret; |
| } |
| |
| static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val) |
| { |
| u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff }; |
| |
| int ret = i2c_master_send(client, buf, 4); |
| v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val); |
| |
| return ret == 4 ? 0 : ret; |
| } |
| |
| static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val) |
| { |
| u16 high = addr >> 16, low = addr & 0xffff; |
| int ret; |
| |
| v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val); |
| |
| ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high); |
| if (!ret) |
| ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low); |
| if (!ret) |
| ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val) |
| { |
| u16 high = addr >> 16, low = addr & 0xffff; |
| int ret; |
| |
| ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high); |
| if (!ret) |
| ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low); |
| if (!ret) |
| ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val); |
| if (!ret) |
| dev_err(&client->dev, "Failed to execute read command\n"); |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| u16 hw_rev, fw_ver = 0; |
| int ret; |
| |
| ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver); |
| if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) { |
| v4l2_err(sd, "FW version check failed!\n"); |
| return -ENODEV; |
| } |
| |
| ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev); |
| if (ret < 0) |
| return ret; |
| |
| v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n", |
| fw_ver, hw_rev); |
| return 0; |
| } |
| |
| static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| |
| /* Set APB peripherals start address */ |
| ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH); |
| if (ret < 0) |
| return ret; |
| /* |
| * FIXME: This is copied from s5k6aa, because of no information |
| * in s5k4ecgx's datasheet. |
| * sw_reset is activated to put device into idle status |
| */ |
| ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001); |
| if (ret < 0) |
| return ret; |
| |
| ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000); |
| if (ret < 0) |
| return ret; |
| /* Halt ARM CPU */ |
| return s5k4ecgx_i2c_write(client, 0x0014, 0x0001); |
| } |
| |
| #define FW_CRC_SIZE 4 |
| /* Register address, value are 4, 2 bytes */ |
| #define FW_RECORD_SIZE 6 |
| /* |
| * The firmware has following format: |
| * < total number of records (4 bytes + 2 bytes padding) N >, |
| * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >, |
| * where "record" is a 4-byte register address followed by 2-byte |
| * register value (little endian). |
| * The firmware generator can be found in following git repository: |
| * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git |
| */ |
| static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| const struct firmware *fw; |
| const u8 *ptr; |
| int err, i, regs_num; |
| u32 addr, crc, crc_file, addr_inc = 0; |
| u16 val; |
| |
| err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev); |
| if (err) { |
| v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE); |
| return err; |
| } |
| regs_num = get_unaligned_le32(fw->data); |
| |
| v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n", |
| S5K4ECGX_FIRMWARE, fw->size, regs_num); |
| |
| regs_num++; /* Add header */ |
| if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) { |
| err = -EINVAL; |
| goto fw_out; |
| } |
| crc_file = get_unaligned_le32(fw->data + regs_num * FW_RECORD_SIZE); |
| crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE); |
| if (crc != crc_file) { |
| v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file); |
| err = -EINVAL; |
| goto fw_out; |
| } |
| ptr = fw->data + FW_RECORD_SIZE; |
| for (i = 1; i < regs_num; i++) { |
| addr = get_unaligned_le32(ptr); |
| ptr += sizeof(u32); |
| val = get_unaligned_le16(ptr); |
| ptr += sizeof(u16); |
| if (addr - addr_inc != 2) |
| err = s5k4ecgx_write(client, addr, val); |
| else |
| err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); |
| if (err) |
| break; |
| addr_inc = addr; |
| } |
| fw_out: |
| release_firmware(fw); |
| return err; |
| } |
| |
| /* Set preview and capture input window */ |
| static int s5k4ecgx_set_input_window(struct i2c_client *c, |
| const struct v4l2_rect *r) |
| { |
| int ret; |
| |
| ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top); |
| |
| return ret; |
| } |
| |
| /* Set preview and capture zoom input window */ |
| static int s5k4ecgx_set_zoom_window(struct i2c_client *c, |
| const struct v4l2_rect *r) |
| { |
| int ret; |
| |
| ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left); |
| if (!ret) |
| ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top); |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); |
| int ret; |
| |
| ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0), |
| priv->curr_frmsize->size.width); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0), |
| priv->curr_frmsize->size.height); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_FMT(0), |
| priv->curr_pixfmt->reg_p_format); |
| return ret; |
| } |
| |
| static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd) |
| { |
| int ret; |
| |
| ret = s5k4ecgx_set_ahb_address(sd); |
| |
| /* The delay is from manufacturer's settings */ |
| msleep(100); |
| |
| if (!ret) |
| ret = s5k4ecgx_load_firmware(sd); |
| if (ret) |
| v4l2_err(sd, "Failed to write initial settings\n"); |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val) |
| { |
| if (!gpio_is_valid(priv->gpio[id].gpio)) |
| return 0; |
| gpio_set_value(priv->gpio[id].gpio, val); |
| |
| return 1; |
| } |
| |
| static int __s5k4ecgx_power_on(struct s5k4ecgx *priv) |
| { |
| int ret; |
| |
| ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); |
| if (ret) |
| return ret; |
| usleep_range(30, 50); |
| |
| /* The polarity of STBY is controlled by TSP */ |
| if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level)) |
| usleep_range(30, 50); |
| |
| if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level)) |
| usleep_range(30, 50); |
| |
| return 0; |
| } |
| |
| static int __s5k4ecgx_power_off(struct s5k4ecgx *priv) |
| { |
| if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level)) |
| usleep_range(30, 50); |
| |
| if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level)) |
| usleep_range(30, 50); |
| |
| priv->streaming = 0; |
| |
| return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); |
| } |
| |
| /* Find nearest matching image pixel size. */ |
| static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf, |
| const struct s5k4ecgx_frmsize **size) |
| { |
| unsigned int min_err = ~0; |
| int i = ARRAY_SIZE(s5k4ecgx_prev_sizes); |
| const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0], |
| *match = NULL; |
| |
| while (i--) { |
| int err = abs(fsize->size.width - mf->width) |
| + abs(fsize->size.height - mf->height); |
| if (err < min_err) { |
| min_err = err; |
| match = fsize; |
| } |
| fsize++; |
| } |
| if (match) { |
| mf->width = match->size.width; |
| mf->height = match->size.height; |
| if (size) |
| *size = match; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index >= ARRAY_SIZE(s5k4ecgx_formats)) |
| return -EINVAL; |
| code->code = s5k4ecgx_formats[code->index].code; |
| |
| return 0; |
| } |
| |
| static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| struct v4l2_mbus_framefmt *mf; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| if (cfg) { |
| mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| fmt->format = *mf; |
| } |
| return 0; |
| } |
| |
| mf = &fmt->format; |
| |
| mutex_lock(&priv->lock); |
| mf->width = priv->curr_frmsize->size.width; |
| mf->height = priv->curr_frmsize->size.height; |
| mf->code = priv->curr_pixfmt->code; |
| mf->colorspace = priv->curr_pixfmt->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| mutex_unlock(&priv->lock); |
| |
| return 0; |
| } |
| |
| static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| int i = ARRAY_SIZE(s5k4ecgx_formats); |
| |
| while (--i) |
| if (mf->code == s5k4ecgx_formats[i].code) |
| break; |
| mf->code = s5k4ecgx_formats[i].code; |
| |
| return &s5k4ecgx_formats[i]; |
| } |
| |
| static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| const struct s5k4ecgx_frmsize *fsize = NULL; |
| const struct s5k4ecgx_pixfmt *pf; |
| struct v4l2_mbus_framefmt *mf; |
| int ret = 0; |
| |
| pf = s5k4ecgx_try_fmt(sd, &fmt->format); |
| s5k4ecgx_try_frame_size(&fmt->format, &fsize); |
| fmt->format.colorspace = V4L2_COLORSPACE_JPEG; |
| fmt->format.field = V4L2_FIELD_NONE; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| if (cfg) { |
| mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| *mf = fmt->format; |
| } |
| return 0; |
| } |
| |
| mutex_lock(&priv->lock); |
| if (!priv->streaming) { |
| priv->curr_frmsize = fsize; |
| priv->curr_pixfmt = pf; |
| priv->set_params = 1; |
| } else { |
| ret = -EBUSY; |
| } |
| mutex_unlock(&priv->lock); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = { |
| .enum_mbus_code = s5k4ecgx_enum_mbus_code, |
| .get_fmt = s5k4ecgx_get_fmt, |
| .set_fmt = s5k4ecgx_set_fmt, |
| }; |
| |
| /* |
| * V4L2 subdev controls |
| */ |
| static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx, |
| handler)->sd; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| unsigned int i; |
| int err = 0; |
| |
| v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val); |
| |
| mutex_lock(&priv->lock); |
| switch (ctrl->id) { |
| case V4L2_CID_CONTRAST: |
| err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val); |
| break; |
| |
| case V4L2_CID_SATURATION: |
| err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val); |
| break; |
| |
| case V4L2_CID_SHARPNESS: |
| /* TODO: Revisit, is this setting for all presets ? */ |
| for (i = 0; i < 4 && !err; i++) |
| err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i), |
| ctrl->val * SHARPNESS_DIV); |
| break; |
| |
| case V4L2_CID_BRIGHTNESS: |
| err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val); |
| break; |
| } |
| mutex_unlock(&priv->lock); |
| if (err < 0) |
| v4l2_err(sd, "Failed to write s_ctrl err %d\n", err); |
| |
| return err; |
| } |
| |
| static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = { |
| .s_ctrl = s5k4ecgx_s_ctrl, |
| }; |
| |
| /* |
| * Reading s5k4ecgx version information |
| */ |
| static int s5k4ecgx_registered(struct v4l2_subdev *sd) |
| { |
| int ret; |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| |
| mutex_lock(&priv->lock); |
| ret = __s5k4ecgx_power_on(priv); |
| if (!ret) { |
| ret = s5k4ecgx_read_fw_ver(sd); |
| __s5k4ecgx_power_off(priv); |
| } |
| mutex_unlock(&priv->lock); |
| |
| return ret; |
| } |
| |
| /* |
| * V4L2 subdev internal operations |
| */ |
| static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0); |
| |
| mf->width = s5k4ecgx_prev_sizes[0].size.width; |
| mf->height = s5k4ecgx_prev_sizes[0].size.height; |
| mf->code = s5k4ecgx_formats[0].code; |
| mf->colorspace = V4L2_COLORSPACE_JPEG; |
| mf->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = { |
| .registered = s5k4ecgx_registered, |
| .open = s5k4ecgx_open, |
| }; |
| |
| static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| int ret; |
| |
| v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off"); |
| |
| if (on) { |
| ret = __s5k4ecgx_power_on(priv); |
| if (ret < 0) |
| return ret; |
| /* Time to stabilize sensor */ |
| msleep(100); |
| ret = s5k4ecgx_init_sensor(sd); |
| if (ret < 0) |
| __s5k4ecgx_power_off(priv); |
| else |
| priv->set_params = 1; |
| } else { |
| ret = __s5k4ecgx_power_off(priv); |
| } |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_log_status(struct v4l2_subdev *sd) |
| { |
| v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = { |
| .s_power = s5k4ecgx_s_power, |
| .log_status = s5k4ecgx_log_status, |
| }; |
| |
| static int __s5k4ecgx_s_params(struct s5k4ecgx *priv) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); |
| const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window; |
| int ret; |
| |
| ret = s5k4ecgx_set_input_window(client, crop_rect); |
| if (!ret) |
| ret = s5k4ecgx_set_zoom_window(client, crop_rect); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1); |
| if (!ret) |
| ret = s5k4ecgx_write(client, 0x70000a1e, 0x28); |
| if (!ret) |
| ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c); |
| if (!ret) |
| ret = s5k4ecgx_set_output_framefmt(priv); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0), |
| FR_TIME_DYNAMIC); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0), |
| FR_TIME_Q_BEST_FRRATE); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_MIN_FR_TIME(0), |
| US_TO_FR_TIME(33300)); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0), |
| US_TO_FR_TIME(66600)); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1); |
| if (!ret) |
| ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1); |
| |
| return ret; |
| } |
| |
| static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); |
| int ret; |
| |
| if (on && priv->set_params) { |
| ret = __s5k4ecgx_s_params(priv); |
| if (ret < 0) |
| return ret; |
| priv->set_params = 0; |
| } |
| /* |
| * This enables/disables preview stream only. Capture requests |
| * are not supported yet. |
| */ |
| ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on); |
| if (ret < 0) |
| return ret; |
| return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1); |
| } |
| |
| static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on) |
| { |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off"); |
| |
| mutex_lock(&priv->lock); |
| |
| if (priv->streaming == !on) { |
| ret = __s5k4ecgx_s_stream(priv, on); |
| if (!ret) |
| priv->streaming = on & 1; |
| } |
| |
| mutex_unlock(&priv->lock); |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = { |
| .s_stream = s5k4ecgx_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_ops s5k4ecgx_ops = { |
| .core = &s5k4ecgx_core_ops, |
| .pad = &s5k4ecgx_pad_ops, |
| .video = &s5k4ecgx_video_ops, |
| }; |
| |
| /* |
| * GPIO setup |
| */ |
| static int s5k4ecgx_config_gpio(int nr, int val, const char *name) |
| { |
| unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; |
| int ret; |
| |
| if (!gpio_is_valid(nr)) |
| return 0; |
| ret = gpio_request_one(nr, flags, name); |
| if (!ret) |
| gpio_export(nr, 0); |
| |
| return ret; |
| } |
| |
| static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) { |
| if (!gpio_is_valid(priv->gpio[i].gpio)) |
| continue; |
| gpio_free(priv->gpio[i].gpio); |
| priv->gpio[i].gpio = -EINVAL; |
| } |
| } |
| |
| static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv, |
| const struct s5k4ecgx_platform_data *pdata) |
| { |
| const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby; |
| int ret; |
| |
| priv->gpio[STBY].gpio = -EINVAL; |
| priv->gpio[RST].gpio = -EINVAL; |
| |
| ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY"); |
| |
| if (ret) { |
| s5k4ecgx_free_gpios(priv); |
| return ret; |
| } |
| priv->gpio[STBY] = *gpio; |
| if (gpio_is_valid(gpio->gpio)) |
| gpio_set_value(gpio->gpio, 0); |
| |
| gpio = &pdata->gpio_reset; |
| |
| ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST"); |
| if (ret) { |
| s5k4ecgx_free_gpios(priv); |
| return ret; |
| } |
| priv->gpio[RST] = *gpio; |
| if (gpio_is_valid(gpio->gpio)) |
| gpio_set_value(gpio->gpio, 0); |
| |
| return 0; |
| } |
| |
| static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv) |
| { |
| const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops; |
| struct v4l2_ctrl_handler *hdl = &priv->handler; |
| int ret; |
| |
| ret = v4l2_ctrl_handler_init(hdl, 4); |
| if (ret) |
| return ret; |
| |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0); |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); |
| |
| /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV, |
| 24612/SHARPNESS_DIV, 1, 2); |
| if (hdl->error) { |
| ret = hdl->error; |
| v4l2_ctrl_handler_free(hdl); |
| return ret; |
| } |
| priv->sd.ctrl_handler = hdl; |
| |
| return 0; |
| }; |
| |
| static int s5k4ecgx_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct s5k4ecgx_platform_data *pdata = client->dev.platform_data; |
| struct v4l2_subdev *sd; |
| struct s5k4ecgx *priv; |
| int ret, i; |
| |
| if (pdata == NULL) { |
| dev_err(&client->dev, "platform data is missing!\n"); |
| return -EINVAL; |
| } |
| |
| priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| mutex_init(&priv->lock); |
| priv->streaming = 0; |
| |
| sd = &priv->sd; |
| /* Registering subdev */ |
| v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops); |
| strlcpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name)); |
| |
| sd->internal_ops = &s5k4ecgx_subdev_internal_ops; |
| /* Support v4l2 sub-device user space API */ |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| |
| priv->pad.flags = MEDIA_PAD_FL_SOURCE; |
| sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; |
| ret = media_entity_init(&sd->entity, 1, &priv->pad, 0); |
| if (ret) |
| return ret; |
| |
| ret = s5k4ecgx_config_gpios(priv, pdata); |
| if (ret) { |
| dev_err(&client->dev, "Failed to set gpios\n"); |
| goto out_err1; |
| } |
| for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++) |
| priv->supplies[i].supply = s5k4ecgx_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES, |
| priv->supplies); |
| if (ret) { |
| dev_err(&client->dev, "Failed to get regulators\n"); |
| goto out_err2; |
| } |
| ret = s5k4ecgx_init_v4l2_ctrls(priv); |
| if (ret) |
| goto out_err2; |
| |
| priv->curr_pixfmt = &s5k4ecgx_formats[0]; |
| priv->curr_frmsize = &s5k4ecgx_prev_sizes[0]; |
| |
| return 0; |
| |
| out_err2: |
| s5k4ecgx_free_gpios(priv); |
| out_err1: |
| media_entity_cleanup(&priv->sd.entity); |
| |
| return ret; |
| } |
| |
| static int s5k4ecgx_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct s5k4ecgx *priv = to_s5k4ecgx(sd); |
| |
| mutex_destroy(&priv->lock); |
| s5k4ecgx_free_gpios(priv); |
| v4l2_device_unregister_subdev(sd); |
| v4l2_ctrl_handler_free(&priv->handler); |
| media_entity_cleanup(&sd->entity); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id s5k4ecgx_id[] = { |
| { S5K4ECGX_DRIVER_NAME, 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id); |
| |
| static struct i2c_driver v4l2_i2c_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = S5K4ECGX_DRIVER_NAME, |
| }, |
| .probe = s5k4ecgx_probe, |
| .remove = s5k4ecgx_remove, |
| .id_table = s5k4ecgx_id, |
| }; |
| |
| module_i2c_driver(v4l2_i2c_driver); |
| |
| MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera"); |
| MODULE_AUTHOR("Sangwook Lee <sangwook.lee@linaro.org>"); |
| MODULE_AUTHOR("Seok-Young Jang <quartz.jang@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(S5K4ECGX_FIRMWARE); |