| /* arch/arm/mach-omap1/include/mach/debug-macro.S |
| * |
| * Debugging macro include header |
| * |
| * Copyright (C) 1994-1999 Russell King |
| * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/serial_reg.h> |
| |
| #include <plat/serial.h> |
| |
| .pushsection .data |
| omap_uart_phys: .word 0x0 |
| omap_uart_virt: .word 0x0 |
| .popsection |
| |
| /* |
| * Note that this code won't work if the bootloader passes |
| * a wrong machine ID number in r1. To debug, just hardcode |
| * the desired UART phys and virt addresses temporarily into |
| * the omap_uart_phys and omap_uart_virt above. |
| */ |
| .macro addruart, rx, tmp |
| |
| /* Use omap_uart_phys/virt if already configured */ |
| 9: mrc p15, 0, \rx, c1, c0 |
| tst \rx, #1 @ MMU enabled? |
| ldreq \rx, =omap_uart_phys @ physical base address |
| ldrne \rx, =omap_uart_virt @ virtual base |
| ldr \rx, [\rx, #0] |
| cmp \rx, #0 @ is port configured? |
| bne 99f @ already configured |
| |
| /* Check 7XX UART1 scratchpad register for uart to use */ |
| mrc p15, 0, \rx, c1, c0 |
| tst \rx, #1 @ MMU enabled? |
| moveq \rx, #0xff000000 @ physical base address |
| movne \rx, #0xfe000000 @ virtual base |
| orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 |
| ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] |
| cmp \rx, #0 @ anything in 7XX scratchpad? |
| bne 10f @ found 7XX uart |
| |
| /* Check 15xx/16xx UART1 scratchpad register for uart to use */ |
| mrc p15, 0, \rx, c1, c0 |
| tst \rx, #1 @ MMU enabled? |
| moveq \rx, #0xff000000 @ physical base address |
| movne \rx, #0xfe000000 @ virtual base |
| orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 |
| ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] |
| |
| /* Select the UART to use based on the UART1 scratchpad value */ |
| 10: cmp \rx, #0 @ no port configured? |
| beq 11f @ if none, try to use UART1 |
| cmp \rx, #OMAP1UART1 |
| beq 11f @ configure OMAP1UART1 |
| cmp \rx, #OMAP1UART2 |
| beq 12f @ configure OMAP1UART2 |
| cmp \rx, #OMAP1UART3 |
| beq 13f @ configure OMAP2UART3 |
| |
| /* Configure the UART offset from the phys/virt base */ |
| 11: mov \rx, #0x00fb0000 @ OMAP1UART1 |
| b 98f |
| 12: mov \rx, #0x00fb0000 @ OMAP1UART1 |
| orr \rx, \rx, #0x00000800 @ OMAP1UART2 |
| b 98f |
| 13: mov \rx, #0x00fb0000 @ OMAP1UART1 |
| orr \rx, \rx, #0x00000800 @ OMAP1UART2 |
| orr \rx, \rx, #0x00009000 @ OMAP1UART3 |
| |
| /* Store both phys and virt address for the uart */ |
| 98: add \rx, \rx, #0xff000000 @ phys base |
| ldr \tmp, =omap_uart_phys |
| str \rx, [\tmp, #0] |
| sub \rx, \rx, #0xff000000 @ phys base |
| add \rx, \rx, #0xfe000000 @ virt base |
| ldr \tmp, =omap_uart_virt |
| str \rx, [\tmp, #0] |
| b 9b |
| 99: |
| .endm |
| |
| .macro senduart,rd,rx |
| strb \rd, [\rx] |
| .endm |
| |
| .macro busyuart,rd,rx |
| 1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)] |
| and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) |
| teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) |
| beq 1002f |
| ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)] |
| and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) |
| teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) |
| bne 1001b |
| 1002: |
| .endm |
| |
| .macro waituart,rd,rx |
| .endm |