| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/sysrq.h> |
| #include <linux/slab.h> |
| #include <linux/circ_buf.h> |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| |
| /** |
| * DOC: interrupt handling |
| * |
| * These functions provide the basic support for enabling and disabling the |
| * interrupt handling support. There's a lot more functionality in i915_irq.c |
| * and related files, but that will be described in separate chapters. |
| */ |
| |
| static const u32 hpd_ilk[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ivb[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG_IVB, |
| }; |
| |
| static const u32 hpd_bdw[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = GEN8_PORT_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ibx[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG |
| }; |
| |
| static const u32 hpd_cpt[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG_CPT, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT |
| }; |
| |
| static const u32 hpd_spt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_PORTA_HOTPLUG_SPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT, |
| [HPD_PORT_E] = SDE_PORTE_HOTPLUG_SPT |
| }; |
| |
| static const u32 hpd_mask_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_EN, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN |
| }; |
| |
| static const u32 hpd_status_g4x[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS |
| }; |
| |
| static const u32 hpd_status_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS |
| }; |
| |
| /* BXT hpd list */ |
| static const u32 hpd_bxt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = BXT_DE_PORT_HP_DDIA, |
| [HPD_PORT_B] = BXT_DE_PORT_HP_DDIB, |
| [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC |
| }; |
| |
| /* IIR can theoretically queue up two events. Be paranoid. */ |
| #define GEN8_IRQ_RESET_NDX(type, which) do { \ |
| I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IMR(which)); \ |
| I915_WRITE(GEN8_##type##_IER(which), 0); \ |
| I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IIR(which)); \ |
| I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ |
| POSTING_READ(GEN8_##type##_IIR(which)); \ |
| } while (0) |
| |
| #define GEN5_IRQ_RESET(type) do { \ |
| I915_WRITE(type##IMR, 0xffffffff); \ |
| POSTING_READ(type##IMR); \ |
| I915_WRITE(type##IER, 0); \ |
| I915_WRITE(type##IIR, 0xffffffff); \ |
| POSTING_READ(type##IIR); \ |
| I915_WRITE(type##IIR, 0xffffffff); \ |
| POSTING_READ(type##IIR); \ |
| } while (0) |
| |
| /* |
| * We should clear IMR at preinstall/uninstall, and just check at postinstall. |
| */ |
| static void gen5_assert_iir_is_zero(struct drm_i915_private *dev_priv, |
| i915_reg_t reg) |
| { |
| u32 val = I915_READ(reg); |
| |
| if (val == 0) |
| return; |
| |
| WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", |
| i915_mmio_reg_offset(reg), val); |
| I915_WRITE(reg, 0xffffffff); |
| POSTING_READ(reg); |
| I915_WRITE(reg, 0xffffffff); |
| POSTING_READ(reg); |
| } |
| |
| #define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \ |
| gen5_assert_iir_is_zero(dev_priv, GEN8_##type##_IIR(which)); \ |
| I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \ |
| I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ |
| POSTING_READ(GEN8_##type##_IMR(which)); \ |
| } while (0) |
| |
| #define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \ |
| gen5_assert_iir_is_zero(dev_priv, type##IIR); \ |
| I915_WRITE(type##IER, (ier_val)); \ |
| I915_WRITE(type##IMR, (imr_val)); \ |
| POSTING_READ(type##IMR); \ |
| } while (0) |
| |
| static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir); |
| |
| /* For display hotplug interrupt */ |
| static inline void |
| i915_hotplug_interrupt_update_locked(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits) |
| { |
| uint32_t val; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| WARN_ON(bits & ~mask); |
| |
| val = I915_READ(PORT_HOTPLUG_EN); |
| val &= ~mask; |
| val |= bits; |
| I915_WRITE(PORT_HOTPLUG_EN, val); |
| } |
| |
| /** |
| * i915_hotplug_interrupt_update - update hotplug interrupt enable |
| * @dev_priv: driver private |
| * @mask: bits to update |
| * @bits: bits to enable |
| * NOTE: the HPD enable bits are modified both inside and outside |
| * of an interrupt context. To avoid that read-modify-write cycles |
| * interfer, these bits are protected by a spinlock. Since this |
| * function is usually not called from a context where the lock is |
| * held already, this function acquires the lock itself. A non-locking |
| * version is also available. |
| */ |
| void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_hotplug_interrupt_update_locked(dev_priv, mask, bits); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| /** |
| * ilk_update_display_irq - update DEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ilk_update_display_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->irq_mask; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->irq_mask) { |
| dev_priv->irq_mask = new_val; |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| POSTING_READ(DEIMR); |
| } |
| } |
| |
| /** |
| * ilk_update_gt_irq - update GTIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void ilk_update_gt_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| dev_priv->gt_irq_mask &= ~interrupt_mask; |
| dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| POSTING_READ(GTIMR); |
| } |
| |
| void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| ilk_update_gt_irq(dev_priv, mask, mask); |
| } |
| |
| void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| ilk_update_gt_irq(dev_priv, mask, 0); |
| } |
| |
| static i915_reg_t gen6_pm_iir(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_INFO(dev_priv)->gen >= 8 ? GEN8_GT_IIR(2) : GEN6_PMIIR; |
| } |
| |
| static i915_reg_t gen6_pm_imr(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_INFO(dev_priv)->gen >= 8 ? GEN8_GT_IMR(2) : GEN6_PMIMR; |
| } |
| |
| static i915_reg_t gen6_pm_ier(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_INFO(dev_priv)->gen >= 8 ? GEN8_GT_IER(2) : GEN6_PMIER; |
| } |
| |
| /** |
| * snb_update_pm_irq - update GEN6_PMIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void snb_update_pm_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| new_val = dev_priv->pm_irq_mask; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->pm_irq_mask) { |
| dev_priv->pm_irq_mask = new_val; |
| I915_WRITE(gen6_pm_imr(dev_priv), dev_priv->pm_irq_mask); |
| POSTING_READ(gen6_pm_imr(dev_priv)); |
| } |
| } |
| |
| void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| snb_update_pm_irq(dev_priv, mask, mask); |
| } |
| |
| static void __gen6_disable_pm_irq(struct drm_i915_private *dev_priv, |
| uint32_t mask) |
| { |
| snb_update_pm_irq(dev_priv, mask, 0); |
| } |
| |
| void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask) |
| { |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| __gen6_disable_pm_irq(dev_priv, mask); |
| } |
| |
| void gen6_reset_rps_interrupts(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| i915_reg_t reg = gen6_pm_iir(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| I915_WRITE(reg, dev_priv->pm_rps_events); |
| I915_WRITE(reg, dev_priv->pm_rps_events); |
| POSTING_READ(reg); |
| dev_priv->rps.pm_iir = 0; |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen6_enable_rps_interrupts(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| WARN_ON(dev_priv->rps.pm_iir); |
| WARN_ON(I915_READ(gen6_pm_iir(dev_priv)) & dev_priv->pm_rps_events); |
| dev_priv->rps.interrupts_enabled = true; |
| I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) | |
| dev_priv->pm_rps_events); |
| gen6_enable_pm_irq(dev_priv, dev_priv->pm_rps_events); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| u32 gen6_sanitize_rps_pm_mask(struct drm_i915_private *dev_priv, u32 mask) |
| { |
| /* |
| * SNB,IVB can while VLV,CHV may hard hang on looping batchbuffer |
| * if GEN6_PM_UP_EI_EXPIRED is masked. |
| * |
| * TODO: verify if this can be reproduced on VLV,CHV. |
| */ |
| if (INTEL_INFO(dev_priv)->gen <= 7 && !IS_HASWELL(dev_priv)) |
| mask &= ~GEN6_PM_RP_UP_EI_EXPIRED; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 8) |
| mask &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP; |
| |
| return mask; |
| } |
| |
| void gen6_disable_rps_interrupts(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| dev_priv->rps.interrupts_enabled = false; |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| cancel_work_sync(&dev_priv->rps.work); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0)); |
| |
| __gen6_disable_pm_irq(dev_priv, dev_priv->pm_rps_events); |
| I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) & |
| ~dev_priv->pm_rps_events); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| synchronize_irq(dev->irq); |
| } |
| |
| /** |
| * bdw_update_port_irq - update DE port interrupt |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void bdw_update_port_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| uint32_t old_val; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| old_val = I915_READ(GEN8_DE_PORT_IMR); |
| |
| new_val = old_val; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != old_val) { |
| I915_WRITE(GEN8_DE_PORT_IMR, new_val); |
| POSTING_READ(GEN8_DE_PORT_IMR); |
| } |
| } |
| |
| /** |
| * bdw_update_pipe_irq - update DE pipe interrupt |
| * @dev_priv: driver private |
| * @pipe: pipe whose interrupt to update |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void bdw_update_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t new_val; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->de_irq_mask[pipe]; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->de_irq_mask[pipe]) { |
| dev_priv->de_irq_mask[pipe] = new_val; |
| I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]); |
| POSTING_READ(GEN8_DE_PIPE_IMR(pipe)); |
| } |
| } |
| |
| /** |
| * ibx_display_interrupt_update - update SDEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask) |
| { |
| uint32_t sdeimr = I915_READ(SDEIMR); |
| sdeimr &= ~interrupt_mask; |
| sdeimr |= (~enabled_irq_mask & interrupt_mask); |
| |
| WARN_ON(enabled_irq_mask & ~interrupt_mask); |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| if (WARN_ON(!intel_irqs_enabled(dev_priv))) |
| return; |
| |
| I915_WRITE(SDEIMR, sdeimr); |
| POSTING_READ(SDEIMR); |
| } |
| |
| static void |
| __i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 enable_mask, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| WARN_ON(!intel_irqs_enabled(dev_priv)); |
| |
| if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || |
| status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", |
| pipe_name(pipe), enable_mask, status_mask)) |
| return; |
| |
| if ((pipestat & enable_mask) == enable_mask) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] |= status_mask; |
| |
| /* Enable the interrupt, clear any pending status */ |
| pipestat |= enable_mask | status_mask; |
| I915_WRITE(reg, pipestat); |
| POSTING_READ(reg); |
| } |
| |
| static void |
| __i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 enable_mask, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| WARN_ON(!intel_irqs_enabled(dev_priv)); |
| |
| if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || |
| status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", |
| pipe_name(pipe), enable_mask, status_mask)) |
| return; |
| |
| if ((pipestat & enable_mask) == 0) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] &= ~status_mask; |
| |
| pipestat &= ~enable_mask; |
| I915_WRITE(reg, pipestat); |
| POSTING_READ(reg); |
| } |
| |
| static u32 vlv_get_pipestat_enable_mask(struct drm_device *dev, u32 status_mask) |
| { |
| u32 enable_mask = status_mask << 16; |
| |
| /* |
| * On pipe A we don't support the PSR interrupt yet, |
| * on pipe B and C the same bit MBZ. |
| */ |
| if (WARN_ON_ONCE(status_mask & PIPE_A_PSR_STATUS_VLV)) |
| return 0; |
| /* |
| * On pipe B and C we don't support the PSR interrupt yet, on pipe |
| * A the same bit is for perf counters which we don't use either. |
| */ |
| if (WARN_ON_ONCE(status_mask & PIPE_B_PSR_STATUS_VLV)) |
| return 0; |
| |
| enable_mask &= ~(PIPE_FIFO_UNDERRUN_STATUS | |
| SPRITE0_FLIP_DONE_INT_EN_VLV | |
| SPRITE1_FLIP_DONE_INT_EN_VLV); |
| if (status_mask & SPRITE0_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE0_FLIP_DONE_INT_EN_VLV; |
| if (status_mask & SPRITE1_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE1_FLIP_DONE_INT_EN_VLV; |
| |
| return enable_mask; |
| } |
| |
| void |
| i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask) |
| { |
| u32 enable_mask; |
| |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| enable_mask = vlv_get_pipestat_enable_mask(dev_priv->dev, |
| status_mask); |
| else |
| enable_mask = status_mask << 16; |
| __i915_enable_pipestat(dev_priv, pipe, enable_mask, status_mask); |
| } |
| |
| void |
| i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask) |
| { |
| u32 enable_mask; |
| |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| enable_mask = vlv_get_pipestat_enable_mask(dev_priv->dev, |
| status_mask); |
| else |
| enable_mask = status_mask << 16; |
| __i915_disable_pipestat(dev_priv, pipe, enable_mask, status_mask); |
| } |
| |
| /** |
| * i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion |
| * @dev: drm device |
| */ |
| static void i915_enable_asle_pipestat(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv->opregion.asle || !IS_MOBILE(dev)) |
| return; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS); |
| if (INTEL_INFO(dev)->gen >= 4) |
| i915_enable_pipestat(dev_priv, PIPE_A, |
| PIPE_LEGACY_BLC_EVENT_STATUS); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| /* |
| * This timing diagram depicts the video signal in and |
| * around the vertical blanking period. |
| * |
| * Assumptions about the fictitious mode used in this example: |
| * vblank_start >= 3 |
| * vsync_start = vblank_start + 1 |
| * vsync_end = vblank_start + 2 |
| * vtotal = vblank_start + 3 |
| * |
| * start of vblank: |
| * latch double buffered registers |
| * increment frame counter (ctg+) |
| * generate start of vblank interrupt (gen4+) |
| * | |
| * | frame start: |
| * | generate frame start interrupt (aka. vblank interrupt) (gmch) |
| * | may be shifted forward 1-3 extra lines via PIPECONF |
| * | | |
| * | | start of vsync: |
| * | | generate vsync interrupt |
| * | | | |
| * ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx |
| * . \hs/ . \hs/ \hs/ \hs/ . \hs/ |
| * ----va---> <-----------------vb--------------------> <--------va------------- |
| * | | <----vs-----> | |
| * -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2) |
| * -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+) |
| * -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi) |
| * | | | |
| * last visible pixel first visible pixel |
| * | increment frame counter (gen3/4) |
| * pixel counter = vblank_start * htotal pixel counter = 0 (gen3/4) |
| * |
| * x = horizontal active |
| * _ = horizontal blanking |
| * hs = horizontal sync |
| * va = vertical active |
| * vb = vertical blanking |
| * vs = vertical sync |
| * vbs = vblank_start (number) |
| * |
| * Summary: |
| * - most events happen at the start of horizontal sync |
| * - frame start happens at the start of horizontal blank, 1-4 lines |
| * (depending on PIPECONF settings) after the start of vblank |
| * - gen3/4 pixel and frame counter are synchronized with the start |
| * of horizontal active on the first line of vertical active |
| */ |
| |
| static u32 i8xx_get_vblank_counter(struct drm_device *dev, unsigned int pipe) |
| { |
| /* Gen2 doesn't have a hardware frame counter */ |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| static u32 i915_get_vblank_counter(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| i915_reg_t high_frame, low_frame; |
| u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal; |
| struct intel_crtc *intel_crtc = |
| to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); |
| const struct drm_display_mode *mode = &intel_crtc->base.hwmode; |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vbl_start = mode->crtc_vblank_start; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| |
| /* Convert to pixel count */ |
| vbl_start *= htotal; |
| |
| /* Start of vblank event occurs at start of hsync */ |
| vbl_start -= htotal - hsync_start; |
| |
| high_frame = PIPEFRAME(pipe); |
| low_frame = PIPEFRAMEPIXEL(pipe); |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; |
| low = I915_READ(low_frame); |
| high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; |
| } while (high1 != high2); |
| |
| high1 >>= PIPE_FRAME_HIGH_SHIFT; |
| pixel = low & PIPE_PIXEL_MASK; |
| low >>= PIPE_FRAME_LOW_SHIFT; |
| |
| /* |
| * The frame counter increments at beginning of active. |
| * Cook up a vblank counter by also checking the pixel |
| * counter against vblank start. |
| */ |
| return (((high1 << 8) | low) + (pixel >= vbl_start)) & 0xffffff; |
| } |
| |
| static u32 g4x_get_vblank_counter(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| return I915_READ(PIPE_FRMCOUNT_G4X(pipe)); |
| } |
| |
| /* I915_READ_FW, only for fast reads of display block, no need for forcewake etc. */ |
| static int __intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| const struct drm_display_mode *mode = &crtc->base.hwmode; |
| enum pipe pipe = crtc->pipe; |
| int position, vtotal; |
| |
| vtotal = mode->crtc_vtotal; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vtotal /= 2; |
| |
| if (IS_GEN2(dev)) |
| position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN2; |
| else |
| position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; |
| |
| /* |
| * On HSW, the DSL reg (0x70000) appears to return 0 if we |
| * read it just before the start of vblank. So try it again |
| * so we don't accidentally end up spanning a vblank frame |
| * increment, causing the pipe_update_end() code to squak at us. |
| * |
| * The nature of this problem means we can't simply check the ISR |
| * bit and return the vblank start value; nor can we use the scanline |
| * debug register in the transcoder as it appears to have the same |
| * problem. We may need to extend this to include other platforms, |
| * but so far testing only shows the problem on HSW. |
| */ |
| if (HAS_DDI(dev) && !position) { |
| int i, temp; |
| |
| for (i = 0; i < 100; i++) { |
| udelay(1); |
| temp = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & |
| DSL_LINEMASK_GEN3; |
| if (temp != position) { |
| position = temp; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * See update_scanline_offset() for the details on the |
| * scanline_offset adjustment. |
| */ |
| return (position + crtc->scanline_offset) % vtotal; |
| } |
| |
| static int i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe, |
| unsigned int flags, int *vpos, int *hpos, |
| ktime_t *stime, ktime_t *etime, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int position; |
| int vbl_start, vbl_end, hsync_start, htotal, vtotal; |
| bool in_vbl = true; |
| int ret = 0; |
| unsigned long irqflags; |
| |
| if (WARN_ON(!mode->crtc_clock)) { |
| DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return 0; |
| } |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vtotal = mode->crtc_vtotal; |
| vbl_start = mode->crtc_vblank_start; |
| vbl_end = mode->crtc_vblank_end; |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| vbl_end /= 2; |
| vtotal /= 2; |
| } |
| |
| ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE; |
| |
| /* |
| * Lock uncore.lock, as we will do multiple timing critical raw |
| * register reads, potentially with preemption disabled, so the |
| * following code must not block on uncore.lock. |
| */ |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| |
| /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| /* Get optional system timestamp before query. */ |
| if (stime) |
| *stime = ktime_get(); |
| |
| if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { |
| /* No obvious pixelcount register. Only query vertical |
| * scanout position from Display scan line register. |
| */ |
| position = __intel_get_crtc_scanline(intel_crtc); |
| } else { |
| /* Have access to pixelcount since start of frame. |
| * We can split this into vertical and horizontal |
| * scanout position. |
| */ |
| position = (I915_READ_FW(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT; |
| |
| /* convert to pixel counts */ |
| vbl_start *= htotal; |
| vbl_end *= htotal; |
| vtotal *= htotal; |
| |
| /* |
| * In interlaced modes, the pixel counter counts all pixels, |
| * so one field will have htotal more pixels. In order to avoid |
| * the reported position from jumping backwards when the pixel |
| * counter is beyond the length of the shorter field, just |
| * clamp the position the length of the shorter field. This |
| * matches how the scanline counter based position works since |
| * the scanline counter doesn't count the two half lines. |
| */ |
| if (position >= vtotal) |
| position = vtotal - 1; |
| |
| /* |
| * Start of vblank interrupt is triggered at start of hsync, |
| * just prior to the first active line of vblank. However we |
| * consider lines to start at the leading edge of horizontal |
| * active. So, should we get here before we've crossed into |
| * the horizontal active of the first line in vblank, we would |
| * not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that, |
| * always add htotal-hsync_start to the current pixel position. |
| */ |
| position = (position + htotal - hsync_start) % vtotal; |
| } |
| |
| /* Get optional system timestamp after query. */ |
| if (etime) |
| *etime = ktime_get(); |
| |
| /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| in_vbl = position >= vbl_start && position < vbl_end; |
| |
| /* |
| * While in vblank, position will be negative |
| * counting up towards 0 at vbl_end. And outside |
| * vblank, position will be positive counting |
| * up since vbl_end. |
| */ |
| if (position >= vbl_start) |
| position -= vbl_end; |
| else |
| position += vtotal - vbl_end; |
| |
| if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { |
| *vpos = position; |
| *hpos = 0; |
| } else { |
| *vpos = position / htotal; |
| *hpos = position - (*vpos * htotal); |
| } |
| |
| /* In vblank? */ |
| if (in_vbl) |
| ret |= DRM_SCANOUTPOS_IN_VBLANK; |
| |
| return ret; |
| } |
| |
| int intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| unsigned long irqflags; |
| int position; |
| |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| position = __intel_get_crtc_scanline(crtc); |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| return position; |
| } |
| |
| static int i915_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe, |
| int *max_error, |
| struct timeval *vblank_time, |
| unsigned flags) |
| { |
| struct drm_crtc *crtc; |
| |
| if (pipe >= INTEL_INFO(dev)->num_pipes) { |
| DRM_ERROR("Invalid crtc %u\n", pipe); |
| return -EINVAL; |
| } |
| |
| /* Get drm_crtc to timestamp: */ |
| crtc = intel_get_crtc_for_pipe(dev, pipe); |
| if (crtc == NULL) { |
| DRM_ERROR("Invalid crtc %u\n", pipe); |
| return -EINVAL; |
| } |
| |
| if (!crtc->hwmode.crtc_clock) { |
| DRM_DEBUG_KMS("crtc %u is disabled\n", pipe); |
| return -EBUSY; |
| } |
| |
| /* Helper routine in DRM core does all the work: */ |
| return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error, |
| vblank_time, flags, |
| &crtc->hwmode); |
| } |
| |
| static void ironlake_rps_change_irq_handler(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 busy_up, busy_down, max_avg, min_avg; |
| u8 new_delay; |
| |
| spin_lock(&mchdev_lock); |
| |
| I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS)); |
| |
| new_delay = dev_priv->ips.cur_delay; |
| |
| I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG); |
| busy_up = I915_READ(RCPREVBSYTUPAVG); |
| busy_down = I915_READ(RCPREVBSYTDNAVG); |
| max_avg = I915_READ(RCBMAXAVG); |
| min_avg = I915_READ(RCBMINAVG); |
| |
| /* Handle RCS change request from hw */ |
| if (busy_up > max_avg) { |
| if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay) |
| new_delay = dev_priv->ips.cur_delay - 1; |
| if (new_delay < dev_priv->ips.max_delay) |
| new_delay = dev_priv->ips.max_delay; |
| } else if (busy_down < min_avg) { |
| if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay) |
| new_delay = dev_priv->ips.cur_delay + 1; |
| if (new_delay > dev_priv->ips.min_delay) |
| new_delay = dev_priv->ips.min_delay; |
| } |
| |
| if (ironlake_set_drps(dev, new_delay)) |
| dev_priv->ips.cur_delay = new_delay; |
| |
| spin_unlock(&mchdev_lock); |
| |
| return; |
| } |
| |
| static void notify_ring(struct intel_engine_cs *engine) |
| { |
| if (!intel_engine_initialized(engine)) |
| return; |
| |
| trace_i915_gem_request_notify(engine); |
| engine->user_interrupts++; |
| |
| wake_up_all(&engine->irq_queue); |
| } |
| |
| static void vlv_c0_read(struct drm_i915_private *dev_priv, |
| struct intel_rps_ei *ei) |
| { |
| ei->cz_clock = vlv_punit_read(dev_priv, PUNIT_REG_CZ_TIMESTAMP); |
| ei->render_c0 = I915_READ(VLV_RENDER_C0_COUNT); |
| ei->media_c0 = I915_READ(VLV_MEDIA_C0_COUNT); |
| } |
| |
| static bool vlv_c0_above(struct drm_i915_private *dev_priv, |
| const struct intel_rps_ei *old, |
| const struct intel_rps_ei *now, |
| int threshold) |
| { |
| u64 time, c0; |
| unsigned int mul = 100; |
| |
| if (old->cz_clock == 0) |
| return false; |
| |
| if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH) |
| mul <<= 8; |
| |
| time = now->cz_clock - old->cz_clock; |
| time *= threshold * dev_priv->czclk_freq; |
| |
| /* Workload can be split between render + media, e.g. SwapBuffers |
| * being blitted in X after being rendered in mesa. To account for |
| * this we need to combine both engines into our activity counter. |
| */ |
| c0 = now->render_c0 - old->render_c0; |
| c0 += now->media_c0 - old->media_c0; |
| c0 *= mul * VLV_CZ_CLOCK_TO_MILLI_SEC; |
| |
| return c0 >= time; |
| } |
| |
| void gen6_rps_reset_ei(struct drm_i915_private *dev_priv) |
| { |
| vlv_c0_read(dev_priv, &dev_priv->rps.down_ei); |
| dev_priv->rps.up_ei = dev_priv->rps.down_ei; |
| } |
| |
| static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir) |
| { |
| struct intel_rps_ei now; |
| u32 events = 0; |
| |
| if ((pm_iir & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED)) == 0) |
| return 0; |
| |
| vlv_c0_read(dev_priv, &now); |
| if (now.cz_clock == 0) |
| return 0; |
| |
| if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) { |
| if (!vlv_c0_above(dev_priv, |
| &dev_priv->rps.down_ei, &now, |
| dev_priv->rps.down_threshold)) |
| events |= GEN6_PM_RP_DOWN_THRESHOLD; |
| dev_priv->rps.down_ei = now; |
| } |
| |
| if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) { |
| if (vlv_c0_above(dev_priv, |
| &dev_priv->rps.up_ei, &now, |
| dev_priv->rps.up_threshold)) |
| events |= GEN6_PM_RP_UP_THRESHOLD; |
| dev_priv->rps.up_ei = now; |
| } |
| |
| return events; |
| } |
| |
| static bool any_waiters(struct drm_i915_private *dev_priv) |
| { |
| struct intel_engine_cs *engine; |
| |
| for_each_engine(engine, dev_priv) |
| if (engine->irq_refcount) |
| return true; |
| |
| return false; |
| } |
| |
| static void gen6_pm_rps_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, rps.work); |
| bool client_boost; |
| int new_delay, adj, min, max; |
| u32 pm_iir; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| /* Speed up work cancelation during disabling rps interrupts. */ |
| if (!dev_priv->rps.interrupts_enabled) { |
| spin_unlock_irq(&dev_priv->irq_lock); |
| return; |
| } |
| |
| /* |
| * The RPS work is synced during runtime suspend, we don't require a |
| * wakeref. TODO: instead of disabling the asserts make sure that we |
| * always hold an RPM reference while the work is running. |
| */ |
| DISABLE_RPM_WAKEREF_ASSERTS(dev_priv); |
| |
| pm_iir = dev_priv->rps.pm_iir; |
| dev_priv->rps.pm_iir = 0; |
| /* Make sure not to corrupt PMIMR state used by ringbuffer on GEN6 */ |
| gen6_enable_pm_irq(dev_priv, dev_priv->pm_rps_events); |
| client_boost = dev_priv->rps.client_boost; |
| dev_priv->rps.client_boost = false; |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* Make sure we didn't queue anything we're not going to process. */ |
| WARN_ON(pm_iir & ~dev_priv->pm_rps_events); |
| |
| if ((pm_iir & dev_priv->pm_rps_events) == 0 && !client_boost) |
| goto out; |
| |
| mutex_lock(&dev_priv->rps.hw_lock); |
| |
| pm_iir |= vlv_wa_c0_ei(dev_priv, pm_iir); |
| |
| adj = dev_priv->rps.last_adj; |
| new_delay = dev_priv->rps.cur_freq; |
| min = dev_priv->rps.min_freq_softlimit; |
| max = dev_priv->rps.max_freq_softlimit; |
| |
| if (client_boost) { |
| new_delay = dev_priv->rps.max_freq_softlimit; |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) { |
| if (adj > 0) |
| adj *= 2; |
| else /* CHV needs even encode values */ |
| adj = IS_CHERRYVIEW(dev_priv) ? 2 : 1; |
| /* |
| * For better performance, jump directly |
| * to RPe if we're below it. |
| */ |
| if (new_delay < dev_priv->rps.efficient_freq - adj) { |
| new_delay = dev_priv->rps.efficient_freq; |
| adj = 0; |
| } |
| } else if (any_waiters(dev_priv)) { |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_DOWN_TIMEOUT) { |
| if (dev_priv->rps.cur_freq > dev_priv->rps.efficient_freq) |
| new_delay = dev_priv->rps.efficient_freq; |
| else |
| new_delay = dev_priv->rps.min_freq_softlimit; |
| adj = 0; |
| } else if (pm_iir & GEN6_PM_RP_DOWN_THRESHOLD) { |
| if (adj < 0) |
| adj *= 2; |
| else /* CHV needs even encode values */ |
| adj = IS_CHERRYVIEW(dev_priv) ? -2 : -1; |
| } else { /* unknown event */ |
| adj = 0; |
| } |
| |
| dev_priv->rps.last_adj = adj; |
| |
| /* sysfs frequency interfaces may have snuck in while servicing the |
| * interrupt |
| */ |
| new_delay += adj; |
| new_delay = clamp_t(int, new_delay, min, max); |
| |
| intel_set_rps(dev_priv->dev, new_delay); |
| |
| mutex_unlock(&dev_priv->rps.hw_lock); |
| out: |
| ENABLE_RPM_WAKEREF_ASSERTS(dev_priv); |
| } |
| |
| |
| /** |
| * ivybridge_parity_work - Workqueue called when a parity error interrupt |
| * occurred. |
| * @work: workqueue struct |
| * |
| * Doesn't actually do anything except notify userspace. As a consequence of |
| * this event, userspace should try to remap the bad rows since statistically |
| * it is likely the same row is more likely to go bad again. |
| */ |
| static void ivybridge_parity_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, l3_parity.error_work); |
| u32 error_status, row, bank, subbank; |
| char *parity_event[6]; |
| uint32_t misccpctl; |
| uint8_t slice = 0; |
| |
| /* We must turn off DOP level clock gating to access the L3 registers. |
| * In order to prevent a get/put style interface, acquire struct mutex |
| * any time we access those registers. |
| */ |
| mutex_lock(&dev_priv->dev->struct_mutex); |
| |
| /* If we've screwed up tracking, just let the interrupt fire again */ |
| if (WARN_ON(!dev_priv->l3_parity.which_slice)) |
| goto out; |
| |
| misccpctl = I915_READ(GEN7_MISCCPCTL); |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE); |
| POSTING_READ(GEN7_MISCCPCTL); |
| |
| while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) { |
| i915_reg_t reg; |
| |
| slice--; |
| if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv))) |
| break; |
| |
| dev_priv->l3_parity.which_slice &= ~(1<<slice); |
| |
| reg = GEN7_L3CDERRST1(slice); |
| |
| error_status = I915_READ(reg); |
| row = GEN7_PARITY_ERROR_ROW(error_status); |
| bank = GEN7_PARITY_ERROR_BANK(error_status); |
| subbank = GEN7_PARITY_ERROR_SUBBANK(error_status); |
| |
| I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE); |
| POSTING_READ(reg); |
| |
| parity_event[0] = I915_L3_PARITY_UEVENT "=1"; |
| parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row); |
| parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank); |
| parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank); |
| parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice); |
| parity_event[5] = NULL; |
| |
| kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj, |
| KOBJ_CHANGE, parity_event); |
| |
| DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n", |
| slice, row, bank, subbank); |
| |
| kfree(parity_event[4]); |
| kfree(parity_event[3]); |
| kfree(parity_event[2]); |
| kfree(parity_event[1]); |
| } |
| |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl); |
| |
| out: |
| WARN_ON(dev_priv->l3_parity.which_slice); |
| spin_lock_irq(&dev_priv->irq_lock); |
| gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv)); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| mutex_unlock(&dev_priv->dev->struct_mutex); |
| } |
| |
| static void ivybridge_parity_error_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir) |
| { |
| if (!HAS_L3_DPF(dev_priv)) |
| return; |
| |
| spin_lock(&dev_priv->irq_lock); |
| gen5_disable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv)); |
| spin_unlock(&dev_priv->irq_lock); |
| |
| iir &= GT_PARITY_ERROR(dev_priv); |
| if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1) |
| dev_priv->l3_parity.which_slice |= 1 << 1; |
| |
| if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT) |
| dev_priv->l3_parity.which_slice |= 1 << 0; |
| |
| queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work); |
| } |
| |
| static void ilk_gt_irq_handler(struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| if (gt_iir & |
| (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT)) |
| notify_ring(&dev_priv->engine[RCS]); |
| if (gt_iir & ILK_BSD_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[VCS]); |
| } |
| |
| static void snb_gt_irq_handler(struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| |
| if (gt_iir & |
| (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT)) |
| notify_ring(&dev_priv->engine[RCS]); |
| if (gt_iir & GT_BSD_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[VCS]); |
| if (gt_iir & GT_BLT_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[BCS]); |
| |
| if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT | |
| GT_BSD_CS_ERROR_INTERRUPT | |
| GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) |
| DRM_DEBUG("Command parser error, gt_iir 0x%08x\n", gt_iir); |
| |
| if (gt_iir & GT_PARITY_ERROR(dev_priv)) |
| ivybridge_parity_error_irq_handler(dev_priv, gt_iir); |
| } |
| |
| static __always_inline void |
| gen8_cs_irq_handler(struct intel_engine_cs *engine, u32 iir, int test_shift) |
| { |
| if (iir & (GT_RENDER_USER_INTERRUPT << test_shift)) |
| notify_ring(engine); |
| if (iir & (GT_CONTEXT_SWITCH_INTERRUPT << test_shift)) |
| tasklet_schedule(&engine->irq_tasklet); |
| } |
| |
| static irqreturn_t gen8_gt_irq_ack(struct drm_i915_private *dev_priv, |
| u32 master_ctl, |
| u32 gt_iir[4]) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (master_ctl & (GEN8_GT_RCS_IRQ | GEN8_GT_BCS_IRQ)) { |
| gt_iir[0] = I915_READ_FW(GEN8_GT_IIR(0)); |
| if (gt_iir[0]) { |
| I915_WRITE_FW(GEN8_GT_IIR(0), gt_iir[0]); |
| ret = IRQ_HANDLED; |
| } else |
| DRM_ERROR("The master control interrupt lied (GT0)!\n"); |
| } |
| |
| if (master_ctl & (GEN8_GT_VCS1_IRQ | GEN8_GT_VCS2_IRQ)) { |
| gt_iir[1] = I915_READ_FW(GEN8_GT_IIR(1)); |
| if (gt_iir[1]) { |
| I915_WRITE_FW(GEN8_GT_IIR(1), gt_iir[1]); |
| ret = IRQ_HANDLED; |
| } else |
| DRM_ERROR("The master control interrupt lied (GT1)!\n"); |
| } |
| |
| if (master_ctl & GEN8_GT_VECS_IRQ) { |
| gt_iir[3] = I915_READ_FW(GEN8_GT_IIR(3)); |
| if (gt_iir[3]) { |
| I915_WRITE_FW(GEN8_GT_IIR(3), gt_iir[3]); |
| ret = IRQ_HANDLED; |
| } else |
| DRM_ERROR("The master control interrupt lied (GT3)!\n"); |
| } |
| |
| if (master_ctl & GEN8_GT_PM_IRQ) { |
| gt_iir[2] = I915_READ_FW(GEN8_GT_IIR(2)); |
| if (gt_iir[2] & dev_priv->pm_rps_events) { |
| I915_WRITE_FW(GEN8_GT_IIR(2), |
| gt_iir[2] & dev_priv->pm_rps_events); |
| ret = IRQ_HANDLED; |
| } else |
| DRM_ERROR("The master control interrupt lied (PM)!\n"); |
| } |
| |
| return ret; |
| } |
| |
| static void gen8_gt_irq_handler(struct drm_i915_private *dev_priv, |
| u32 gt_iir[4]) |
| { |
| if (gt_iir[0]) { |
| gen8_cs_irq_handler(&dev_priv->engine[RCS], |
| gt_iir[0], GEN8_RCS_IRQ_SHIFT); |
| gen8_cs_irq_handler(&dev_priv->engine[BCS], |
| gt_iir[0], GEN8_BCS_IRQ_SHIFT); |
| } |
| |
| if (gt_iir[1]) { |
| gen8_cs_irq_handler(&dev_priv->engine[VCS], |
| gt_iir[1], GEN8_VCS1_IRQ_SHIFT); |
| gen8_cs_irq_handler(&dev_priv->engine[VCS2], |
| gt_iir[1], GEN8_VCS2_IRQ_SHIFT); |
| } |
| |
| if (gt_iir[3]) |
| gen8_cs_irq_handler(&dev_priv->engine[VECS], |
| gt_iir[3], GEN8_VECS_IRQ_SHIFT); |
| |
| if (gt_iir[2] & dev_priv->pm_rps_events) |
| gen6_rps_irq_handler(dev_priv, gt_iir[2]); |
| } |
| |
| static bool bxt_port_hotplug_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug2_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_E: |
| return val & PORTE_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ilk_port_hotplug_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_A: |
| return val & DIGITAL_PORTA_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool pch_port_hotplug_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool i9xx_port_hotplug_long_detect(enum port port, u32 val) |
| { |
| switch (port) { |
| case PORT_B: |
| return val & PORTB_HOTPLUG_INT_LONG_PULSE; |
| case PORT_C: |
| return val & PORTC_HOTPLUG_INT_LONG_PULSE; |
| case PORT_D: |
| return val & PORTD_HOTPLUG_INT_LONG_PULSE; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * Get a bit mask of pins that have triggered, and which ones may be long. |
| * This can be called multiple times with the same masks to accumulate |
| * hotplug detection results from several registers. |
| * |
| * Note that the caller is expected to zero out the masks initially. |
| */ |
| static void intel_get_hpd_pins(u32 *pin_mask, u32 *long_mask, |
| u32 hotplug_trigger, u32 dig_hotplug_reg, |
| const u32 hpd[HPD_NUM_PINS], |
| bool long_pulse_detect(enum port port, u32 val)) |
| { |
| enum port port; |
| int i; |
| |
| for_each_hpd_pin(i) { |
| if ((hpd[i] & hotplug_trigger) == 0) |
| continue; |
| |
| *pin_mask |= BIT(i); |
| |
| if (!intel_hpd_pin_to_port(i, &port)) |
| continue; |
| |
| if (long_pulse_detect(port, dig_hotplug_reg)) |
| *long_mask |= BIT(i); |
| } |
| |
| DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, dig 0x%08x, pins 0x%08x\n", |
| hotplug_trigger, dig_hotplug_reg, *pin_mask); |
| |
| } |
| |
| static void gmbus_irq_handler(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| static void dp_aux_irq_handler(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| static void display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe, |
| uint32_t crc0, uint32_t crc1, |
| uint32_t crc2, uint32_t crc3, |
| uint32_t crc4) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe]; |
| struct intel_pipe_crc_entry *entry; |
| int head, tail; |
| |
| spin_lock(&pipe_crc->lock); |
| |
| if (!pipe_crc->entries) { |
| spin_unlock(&pipe_crc->lock); |
| DRM_DEBUG_KMS("spurious interrupt\n"); |
| return; |
| } |
| |
| head = pipe_crc->head; |
| tail = pipe_crc->tail; |
| |
| if (CIRC_SPACE(head, tail, INTEL_PIPE_CRC_ENTRIES_NR) < 1) { |
| spin_unlock(&pipe_crc->lock); |
| DRM_ERROR("CRC buffer overflowing\n"); |
| return; |
| } |
| |
| entry = &pipe_crc->entries[head]; |
| |
| entry->frame = dev->driver->get_vblank_counter(dev, pipe); |
| entry->crc[0] = crc0; |
| entry->crc[1] = crc1; |
| entry->crc[2] = crc2; |
| entry->crc[3] = crc3; |
| entry->crc[4] = crc4; |
| |
| head = (head + 1) & (INTEL_PIPE_CRC_ENTRIES_NR - 1); |
| pipe_crc->head = head; |
| |
| spin_unlock(&pipe_crc->lock); |
| |
| wake_up_interruptible(&pipe_crc->wq); |
| } |
| #else |
| static inline void |
| display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe, |
| uint32_t crc0, uint32_t crc1, |
| uint32_t crc2, uint32_t crc3, |
| uint32_t crc4) {} |
| #endif |
| |
| |
| static void hsw_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| display_pipe_crc_irq_handler(dev, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| 0, 0, 0, 0); |
| } |
| |
| static void ivb_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| display_pipe_crc_irq_handler(dev, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_2_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_3_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_4_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_5_IVB(pipe))); |
| } |
| |
| static void i9xx_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t res1, res2; |
| |
| if (INTEL_INFO(dev)->gen >= 3) |
| res1 = I915_READ(PIPE_CRC_RES_RES1_I915(pipe)); |
| else |
| res1 = 0; |
| |
| if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) |
| res2 = I915_READ(PIPE_CRC_RES_RES2_G4X(pipe)); |
| else |
| res2 = 0; |
| |
| display_pipe_crc_irq_handler(dev, pipe, |
| I915_READ(PIPE_CRC_RES_RED(pipe)), |
| I915_READ(PIPE_CRC_RES_GREEN(pipe)), |
| I915_READ(PIPE_CRC_RES_BLUE(pipe)), |
| res1, res2); |
| } |
| |
| /* The RPS events need forcewake, so we add them to a work queue and mask their |
| * IMR bits until the work is done. Other interrupts can be processed without |
| * the work queue. */ |
| static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir) |
| { |
| if (pm_iir & dev_priv->pm_rps_events) { |
| spin_lock(&dev_priv->irq_lock); |
| gen6_disable_pm_irq(dev_priv, pm_iir & dev_priv->pm_rps_events); |
| if (dev_priv->rps.interrupts_enabled) { |
| dev_priv->rps.pm_iir |= pm_iir & dev_priv->pm_rps_events; |
| queue_work(dev_priv->wq, &dev_priv->rps.work); |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| } |
| |
| if (INTEL_INFO(dev_priv)->gen >= 8) |
| return; |
| |
| if (HAS_VEBOX(dev_priv)) { |
| if (pm_iir & PM_VEBOX_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[VECS]); |
| |
| if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) |
| DRM_DEBUG("Command parser error, pm_iir 0x%08x\n", pm_iir); |
| } |
| } |
| |
| static bool intel_pipe_handle_vblank(struct drm_device *dev, enum pipe pipe) |
| { |
| if (!drm_handle_vblank(dev, pipe)) |
| return false; |
| |
| return true; |
| } |
| |
| static void valleyview_pipestat_irq_ack(struct drm_device *dev, u32 iir, |
| u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| spin_lock(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) { |
| spin_unlock(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg; |
| u32 mask, iir_bit = 0; |
| |
| /* |
| * PIPESTAT bits get signalled even when the interrupt is |
| * disabled with the mask bits, and some of the status bits do |
| * not generate interrupts at all (like the underrun bit). Hence |
| * we need to be careful that we only handle what we want to |
| * handle. |
| */ |
| |
| /* fifo underruns are filterered in the underrun handler. */ |
| mask = PIPE_FIFO_UNDERRUN_STATUS; |
| |
| switch (pipe) { |
| case PIPE_A: |
| iir_bit = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; |
| break; |
| case PIPE_B: |
| iir_bit = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| break; |
| case PIPE_C: |
| iir_bit = I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; |
| break; |
| } |
| if (iir & iir_bit) |
| mask |= dev_priv->pipestat_irq_mask[pipe]; |
| |
| if (!mask) |
| continue; |
| |
| reg = PIPESTAT(pipe); |
| mask |= PIPESTAT_INT_ENABLE_MASK; |
| pipe_stats[pipe] = I915_READ(reg) & mask; |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & (PIPE_FIFO_UNDERRUN_STATUS | |
| PIPESTAT_INT_STATUS_MASK)) |
| I915_WRITE(reg, pipe_stats[pipe]); |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| } |
| |
| static void valleyview_pipestat_irq_handler(struct drm_device *dev, |
| u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS && |
| intel_pipe_handle_vblank(dev, pipe)) |
| intel_check_page_flip(dev, pipe); |
| |
| if (pipe_stats[pipe] & PLANE_FLIP_DONE_INT_STATUS_VLV) { |
| intel_prepare_page_flip(dev, pipe); |
| intel_finish_page_flip(dev, pipe); |
| } |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev); |
| } |
| |
| static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); |
| |
| if (hotplug_status) |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| |
| return hotplug_status; |
| } |
| |
| static void i9xx_hpd_irq_handler(struct drm_device *dev, |
| u32 hotplug_status) |
| { |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
| u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X; |
| |
| if (hotplug_trigger) { |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| hotplug_trigger, hpd_status_g4x, |
| i9xx_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| } |
| |
| if (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X) |
| dp_aux_irq_handler(dev); |
| } else { |
| u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; |
| |
| if (hotplug_trigger) { |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| hotplug_trigger, hpd_status_i915, |
| i9xx_port_hotplug_long_detect); |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| } |
| } |
| } |
| |
| static irqreturn_t valleyview_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 iir, gt_iir, pm_iir; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 ier = 0; |
| |
| gt_iir = I915_READ(GTIIR); |
| pm_iir = I915_READ(GEN6_PMIIR); |
| iir = I915_READ(VLV_IIR); |
| |
| if (gt_iir == 0 && pm_iir == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * (((GT_IIR & GT_IER) || (GEN6_PMIIR & GEN6_PMIER)) && |
| * (VLV_MASTER_IER & MASTER_INTERRUPT_ENABLE))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear MASTER_INTERRUPT_ENABLE and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR, GT_IIR, GEN6_PMIIR |
| * bits this time around. |
| */ |
| I915_WRITE(VLV_MASTER_IER, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| if (gt_iir) |
| I915_WRITE(GTIIR, gt_iir); |
| if (pm_iir) |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| valleyview_pipestat_irq_ack(dev, iir, pipe_stats); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| if (gt_iir) |
| snb_gt_irq_handler(dev_priv, gt_iir); |
| if (pm_iir) |
| gen6_rps_irq_handler(dev_priv, pm_iir); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static irqreturn_t cherryview_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| do { |
| u32 master_ctl, iir; |
| u32 gt_iir[4] = {}; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 ier = 0; |
| |
| master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL; |
| iir = I915_READ(VLV_IIR); |
| |
| if (master_ctl == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * ((GEN8_MASTER_IRQ & ~GEN8_MASTER_IRQ_CONTROL) && |
| * (GEN8_MASTER_IRQ & GEN8_MASTER_IRQ_CONTROL))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear GEN8_MASTER_IRQ_CONTROL and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR and GEN8_MASTER_IRQ_CONTROL |
| * bits this time around. |
| */ |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| gen8_gt_irq_ack(dev_priv, master_ctl, gt_iir); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| valleyview_pipestat_irq_ack(dev, iir, pipe_stats); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_handler(dev_priv, gt_iir); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| /* |
| * Somehow the PCH doesn't seem to really ack the interrupt to the CPU |
| * unless we touch the hotplug register, even if hotplug_trigger is |
| * zero. Not acking leads to "The master control interrupt lied (SDE)!" |
| * errors. |
| */ |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| if (!hotplug_trigger) { |
| u32 mask = PORTA_HOTPLUG_STATUS_MASK | |
| PORTD_HOTPLUG_STATUS_MASK | |
| PORTC_HOTPLUG_STATUS_MASK | |
| PORTB_HOTPLUG_STATUS_MASK; |
| dig_hotplug_reg &= ~mask; |
| } |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| if (!hotplug_trigger) |
| return; |
| |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| pch_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| } |
| |
| static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK; |
| |
| ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >> |
| SDE_AUDIO_POWER_SHIFT); |
| DRM_DEBUG_DRIVER("PCH audio power change on port %d\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK) |
| dp_aux_irq_handler(dev); |
| |
| if (pch_iir & SDE_GMBUS) |
| gmbus_irq_handler(dev); |
| |
| if (pch_iir & SDE_AUDIO_HDCP_MASK) |
| DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_TRANS_MASK) |
| DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n"); |
| |
| if (pch_iir & SDE_POISON) |
| DRM_ERROR("PCH poison interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK) |
| for_each_pipe(dev_priv, pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n"); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n"); |
| |
| if (pch_iir & SDE_TRANSA_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, TRANSCODER_A); |
| |
| if (pch_iir & SDE_TRANSB_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, TRANSCODER_B); |
| } |
| |
| static void ivb_err_int_handler(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 err_int = I915_READ(GEN7_ERR_INT); |
| enum pipe pipe; |
| |
| if (err_int & ERR_INT_POISON) |
| DRM_ERROR("Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (err_int & ERR_INT_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (err_int & ERR_INT_PIPE_CRC_DONE(pipe)) { |
| if (IS_IVYBRIDGE(dev)) |
| ivb_pipe_crc_irq_handler(dev, pipe); |
| else |
| hsw_pipe_crc_irq_handler(dev, pipe); |
| } |
| } |
| |
| I915_WRITE(GEN7_ERR_INT, err_int); |
| } |
| |
| static void cpt_serr_int_handler(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 serr_int = I915_READ(SERR_INT); |
| |
| if (serr_int & SERR_INT_POISON) |
| DRM_ERROR("PCH poison interrupt\n"); |
| |
| if (serr_int & SERR_INT_TRANS_A_FIFO_UNDERRUN) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, TRANSCODER_A); |
| |
| if (serr_int & SERR_INT_TRANS_B_FIFO_UNDERRUN) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, TRANSCODER_B); |
| |
| if (serr_int & SERR_INT_TRANS_C_FIFO_UNDERRUN) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, TRANSCODER_C); |
| |
| I915_WRITE(SERR_INT, serr_int); |
| } |
| |
| static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT; |
| |
| ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >> |
| SDE_AUDIO_POWER_SHIFT_CPT); |
| DRM_DEBUG_DRIVER("PCH audio power change on port %c\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK_CPT) |
| dp_aux_irq_handler(dev); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev); |
| |
| if (pch_iir & SDE_AUDIO_CP_REQ_CPT) |
| DRM_DEBUG_DRIVER("Audio CP request interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_CP_CHG_CPT) |
| DRM_DEBUG_DRIVER("Audio CP change interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK_CPT) |
| for_each_pipe(dev_priv, pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| |
| if (pch_iir & SDE_ERROR_CPT) |
| cpt_serr_int_handler(dev); |
| } |
| |
| static void spt_irq_handler(struct drm_device *dev, u32 pch_iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_SPT & |
| ~SDE_PORTE_HOTPLUG_SPT; |
| u32 hotplug2_trigger = pch_iir & SDE_PORTE_HOTPLUG_SPT; |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd_spt, |
| spt_port_hotplug_long_detect); |
| } |
| |
| if (hotplug2_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG2); |
| I915_WRITE(PCH_PORT_HOTPLUG2, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug2_trigger, |
| dig_hotplug_reg, hpd_spt, |
| spt_port_hotplug2_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev); |
| } |
| |
| static void ilk_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| ilk_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| } |
| |
| static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev, hotplug_trigger, hpd_ilk); |
| |
| if (de_iir & DE_AUX_CHANNEL_A) |
| dp_aux_irq_handler(dev); |
| |
| if (de_iir & DE_GSE) |
| intel_opregion_asle_intr(dev); |
| |
| if (de_iir & DE_POISON) |
| DRM_ERROR("Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & DE_PIPE_VBLANK(pipe) && |
| intel_pipe_handle_vblank(dev, pipe)) |
| intel_check_page_flip(dev, pipe); |
| |
| if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (de_iir & DE_PIPE_CRC_DONE(pipe)) |
| i9xx_pipe_crc_irq_handler(dev, pipe); |
| |
| /* plane/pipes map 1:1 on ilk+ */ |
| if (de_iir & DE_PLANE_FLIP_DONE(pipe)) { |
| intel_prepare_page_flip(dev, pipe); |
| intel_finish_page_flip_plane(dev, pipe); |
| } |
| } |
| |
| /* check event from PCH */ |
| if (de_iir & DE_PCH_EVENT) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| if (HAS_PCH_CPT(dev)) |
| cpt_irq_handler(dev, pch_iir); |
| else |
| ibx_irq_handler(dev, pch_iir); |
| |
| /* should clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| |
| if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT) |
| ironlake_rps_change_irq_handler(dev); |
| } |
| |
| static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG_IVB; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev, hotplug_trigger, hpd_ivb); |
| |
| if (de_iir & DE_ERR_INT_IVB) |
| ivb_err_int_handler(dev); |
| |
| if (de_iir & DE_AUX_CHANNEL_A_IVB) |
| dp_aux_irq_handler(dev); |
| |
| if (de_iir & DE_GSE_IVB) |
| intel_opregion_asle_intr(dev); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)) && |
| intel_pipe_handle_vblank(dev, pipe)) |
| intel_check_page_flip(dev, pipe); |
| |
| /* plane/pipes map 1:1 on ilk+ */ |
| if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) { |
| intel_prepare_page_flip(dev, pipe); |
| intel_finish_page_flip_plane(dev, pipe); |
| } |
| } |
| |
| /* check event from PCH */ |
| if (!HAS_PCH_NOP(dev) && (de_iir & DE_PCH_EVENT_IVB)) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| cpt_irq_handler(dev, pch_iir); |
| |
| /* clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| } |
| |
| /* |
| * To handle irqs with the minimum potential races with fresh interrupts, we: |
| * 1 - Disable Master Interrupt Control. |
| * 2 - Find the source(s) of the interrupt. |
| * 3 - Clear the Interrupt Identity bits (IIR). |
| * 4 - Process the interrupt(s) that had bits set in the IIRs. |
| * 5 - Re-enable Master Interrupt Control. |
| */ |
| static irqreturn_t ironlake_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 de_iir, gt_iir, de_ier, sde_ier = 0; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| /* disable master interrupt before clearing iir */ |
| de_ier = I915_READ(DEIER); |
| I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); |
| POSTING_READ(DEIER); |
| |
| /* Disable south interrupts. We'll only write to SDEIIR once, so further |
| * interrupts will will be stored on its back queue, and then we'll be |
| * able to process them after we restore SDEIER (as soon as we restore |
| * it, we'll get an interrupt if SDEIIR still has something to process |
| * due to its back queue). */ |
| if (!HAS_PCH_NOP(dev)) { |
| sde_ier = I915_READ(SDEIER); |
| I915_WRITE(SDEIER, 0); |
| POSTING_READ(SDEIER); |
| } |
| |
| /* Find, clear, then process each source of interrupt */ |
| |
| gt_iir = I915_READ(GTIIR); |
| if (gt_iir) { |
| I915_WRITE(GTIIR, gt_iir); |
| ret = IRQ_HANDLED; |
| if (INTEL_INFO(dev)->gen >= 6) |
| snb_gt_irq_handler(dev_priv, gt_iir); |
| else |
| ilk_gt_irq_handler(dev_priv, gt_iir); |
| } |
| |
| de_iir = I915_READ(DEIIR); |
| if (de_iir) { |
| I915_WRITE(DEIIR, de_iir); |
| ret = IRQ_HANDLED; |
| if (INTEL_INFO(dev)->gen >= 7) |
| ivb_display_irq_handler(dev, de_iir); |
| else |
| ilk_display_irq_handler(dev, de_iir); |
| } |
| |
| if (INTEL_INFO(dev)->gen >= 6) { |
| u32 pm_iir = I915_READ(GEN6_PMIIR); |
| if (pm_iir) { |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| ret = IRQ_HANDLED; |
| gen6_rps_irq_handler(dev_priv, pm_iir); |
| } |
| } |
| |
| I915_WRITE(DEIER, de_ier); |
| POSTING_READ(DEIER); |
| if (!HAS_PCH_NOP(dev)) { |
| I915_WRITE(SDEIER, sde_ier); |
| POSTING_READ(SDEIER); |
| } |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void bxt_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, |
| dig_hotplug_reg, hpd, |
| bxt_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev, pin_mask, long_mask); |
| } |
| |
| static irqreturn_t |
| gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| irqreturn_t ret = IRQ_NONE; |
| u32 iir; |
| enum pipe pipe; |
| |
| if (master_ctl & GEN8_DE_MISC_IRQ) { |
| iir = I915_READ(GEN8_DE_MISC_IIR); |
| if (iir) { |
| I915_WRITE(GEN8_DE_MISC_IIR, iir); |
| ret = IRQ_HANDLED; |
| if (iir & GEN8_DE_MISC_GSE) |
| intel_opregion_asle_intr(dev); |
| else |
| DRM_ERROR("Unexpected DE Misc interrupt\n"); |
| } |
| else |
| DRM_ERROR("The master control interrupt lied (DE MISC)!\n"); |
| } |
| |
| if (master_ctl & GEN8_DE_PORT_IRQ) { |
| iir = I915_READ(GEN8_DE_PORT_IIR); |
| if (iir) { |
| u32 tmp_mask; |
| bool found = false; |
| |
| I915_WRITE(GEN8_DE_PORT_IIR, iir); |
| ret = IRQ_HANDLED; |
| |
| tmp_mask = GEN8_AUX_CHANNEL_A; |
| if (INTEL_INFO(dev_priv)->gen >= 9) |
| tmp_mask |= GEN9_AUX_CHANNEL_B | |
| GEN9_AUX_CHANNEL_C | |
| GEN9_AUX_CHANNEL_D; |
| |
| if (iir & tmp_mask) { |
| dp_aux_irq_handler(dev); |
| found = true; |
| } |
| |
| if (IS_BROXTON(dev_priv)) { |
| tmp_mask = iir & BXT_DE_PORT_HOTPLUG_MASK; |
| if (tmp_mask) { |
| bxt_hpd_irq_handler(dev, tmp_mask, hpd_bxt); |
| found = true; |
| } |
| } else if (IS_BROADWELL(dev_priv)) { |
| tmp_mask = iir & GEN8_PORT_DP_A_HOTPLUG; |
| if (tmp_mask) { |
| ilk_hpd_irq_handler(dev, tmp_mask, hpd_bdw); |
| found = true; |
| } |
| } |
| |
| if (IS_BROXTON(dev) && (iir & BXT_DE_PORT_GMBUS)) { |
| gmbus_irq_handler(dev); |
| found = true; |
| } |
| |
| if (!found) |
| DRM_ERROR("Unexpected DE Port interrupt\n"); |
| } |
| else |
| DRM_ERROR("The master control interrupt lied (DE PORT)!\n"); |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| u32 flip_done, fault_errors; |
| |
| if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe))) |
| continue; |
| |
| iir = I915_READ(GEN8_DE_PIPE_IIR(pipe)); |
| if (!iir) { |
| DRM_ERROR("The master control interrupt lied (DE PIPE)!\n"); |
| continue; |
| } |
| |
| ret = IRQ_HANDLED; |
| I915_WRITE(GEN8_DE_PIPE_IIR(pipe), iir); |
| |
| if (iir & GEN8_PIPE_VBLANK && |
| intel_pipe_handle_vblank(dev, pipe)) |
| intel_check_page_flip(dev, pipe); |
| |
| flip_done = iir; |
| if (INTEL_INFO(dev_priv)->gen >= 9) |
| flip_done &= GEN9_PIPE_PLANE1_FLIP_DONE; |
| else |
| flip_done &= GEN8_PIPE_PRIMARY_FLIP_DONE; |
| |
| if (flip_done) { |
| intel_prepare_page_flip(dev, pipe); |
| intel_finish_page_flip_plane(dev, pipe); |
| } |
| |
| if (iir & GEN8_PIPE_CDCLK_CRC_DONE) |
| hsw_pipe_crc_irq_handler(dev, pipe); |
| |
| if (iir & GEN8_PIPE_FIFO_UNDERRUN) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| fault_errors = iir; |
| if (INTEL_INFO(dev_priv)->gen >= 9) |
| fault_errors &= GEN9_DE_PIPE_IRQ_FAULT_ERRORS; |
| else |
| fault_errors &= GEN8_DE_PIPE_IRQ_FAULT_ERRORS; |
| |
| if (fault_errors) |
| DRM_ERROR("Fault errors on pipe %c\n: 0x%08x", |
| pipe_name(pipe), |
| fault_errors); |
| } |
| |
| if (HAS_PCH_SPLIT(dev) && !HAS_PCH_NOP(dev) && |
| master_ctl & GEN8_DE_PCH_IRQ) { |
| /* |
| * FIXME(BDW): Assume for now that the new interrupt handling |
| * scheme also closed the SDE interrupt handling race we've seen |
| * on older pch-split platforms. But this needs testing. |
| */ |
| iir = I915_READ(SDEIIR); |
| if (iir) { |
| I915_WRITE(SDEIIR, iir); |
| ret = IRQ_HANDLED; |
| |
| if (HAS_PCH_SPT(dev_priv) || HAS_PCH_KBP(dev_priv)) |
| spt_irq_handler(dev, iir); |
| else |
| cpt_irq_handler(dev, iir); |
| } else { |
| /* |
| * Like on previous PCH there seems to be something |
| * fishy going on with forwarding PCH interrupts. |
| */ |
| DRM_DEBUG_DRIVER("The master control interrupt lied (SDE)!\n"); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t gen8_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 master_ctl; |
| u32 gt_iir[4] = {}; |
| irqreturn_t ret; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| master_ctl = I915_READ_FW(GEN8_MASTER_IRQ); |
| master_ctl &= ~GEN8_MASTER_IRQ_CONTROL; |
| if (!master_ctl) |
| return IRQ_NONE; |
| |
| I915_WRITE_FW(GEN8_MASTER_IRQ, 0); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| /* Find, clear, then process each source of interrupt */ |
| ret = gen8_gt_irq_ack(dev_priv, master_ctl, gt_iir); |
| gen8_gt_irq_handler(dev_priv, gt_iir); |
| ret |= gen8_de_irq_handler(dev_priv, master_ctl); |
| |
| I915_WRITE_FW(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ_FW(GEN8_MASTER_IRQ); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i915_error_wake_up(struct drm_i915_private *dev_priv, |
| bool reset_completed) |
| { |
| struct intel_engine_cs *engine; |
| |
| /* |
| * Notify all waiters for GPU completion events that reset state has |
| * been changed, and that they need to restart their wait after |
| * checking for potential errors (and bail out to drop locks if there is |
| * a gpu reset pending so that i915_error_work_func can acquire them). |
| */ |
| |
| /* Wake up __wait_seqno, potentially holding dev->struct_mutex. */ |
| for_each_engine(engine, dev_priv) |
| wake_up_all(&engine->irq_queue); |
| |
| /* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */ |
| wake_up_all(&dev_priv->pending_flip_queue); |
| |
| /* |
| * Signal tasks blocked in i915_gem_wait_for_error that the pending |
| * reset state is cleared. |
| */ |
| if (reset_completed) |
| wake_up_all(&dev_priv->gpu_error.reset_queue); |
| } |
| |
| /** |
| * i915_reset_and_wakeup - do process context error handling work |
| * @dev: drm device |
| * |
| * Fire an error uevent so userspace can see that a hang or error |
| * was detected. |
| */ |
| static void i915_reset_and_wakeup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| char *error_event[] = { I915_ERROR_UEVENT "=1", NULL }; |
| char *reset_event[] = { I915_RESET_UEVENT "=1", NULL }; |
| char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL }; |
| int ret; |
| |
| kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event); |
| |
| /* |
| * Note that there's only one work item which does gpu resets, so we |
| * need not worry about concurrent gpu resets potentially incrementing |
| * error->reset_counter twice. We only need to take care of another |
| * racing irq/hangcheck declaring the gpu dead for a second time. A |
| * quick check for that is good enough: schedule_work ensures the |
| * correct ordering between hang detection and this work item, and since |
| * the reset in-progress bit is only ever set by code outside of this |
| * work we don't need to worry about any other races. |
| */ |
| if (i915_reset_in_progress(&dev_priv->gpu_error)) { |
| DRM_DEBUG_DRIVER("resetting chip\n"); |
| kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, |
| reset_event); |
| |
| /* |
| * In most cases it's guaranteed that we get here with an RPM |
| * reference held, for example because there is a pending GPU |
| * request that won't finish until the reset is done. This |
| * isn't the case at least when we get here by doing a |
| * simulated reset via debugs, so get an RPM reference. |
| */ |
| intel_runtime_pm_get(dev_priv); |
| |
| intel_prepare_reset(dev); |
| |
| /* |
| * All state reset _must_ be completed before we update the |
| * reset counter, for otherwise waiters might miss the reset |
| * pending state and not properly drop locks, resulting in |
| * deadlocks with the reset work. |
| */ |
| ret = i915_reset(dev); |
| |
| intel_finish_reset(dev); |
| |
| intel_runtime_pm_put(dev_priv); |
| |
| if (ret == 0) |
| kobject_uevent_env(&dev->primary->kdev->kobj, |
| KOBJ_CHANGE, reset_done_event); |
| |
| /* |
| * Note: The wake_up also serves as a memory barrier so that |
| * waiters see the update value of the reset counter atomic_t. |
| */ |
| i915_error_wake_up(dev_priv, true); |
| } |
| } |
| |
| static void i915_report_and_clear_eir(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t instdone[I915_NUM_INSTDONE_REG]; |
| u32 eir = I915_READ(EIR); |
| int pipe, i; |
| |
| if (!eir) |
| return; |
| |
| pr_err("render error detected, EIR: 0x%08x\n", eir); |
| |
| i915_get_extra_instdone(dev, instdone); |
| |
| if (IS_G4X(dev)) { |
| if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); |
| for (i = 0; i < ARRAY_SIZE(instdone); i++) |
| pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]); |
| pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| POSTING_READ(IPEIR_I965); |
| } |
| if (eir & GM45_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| pr_err("page table error\n"); |
| pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| POSTING_READ(PGTBL_ER); |
| } |
| } |
| |
| if (!IS_GEN2(dev)) { |
| if (eir & I915_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| pr_err("page table error\n"); |
| pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| POSTING_READ(PGTBL_ER); |
| } |
| } |
| |
| if (eir & I915_ERROR_MEMORY_REFRESH) { |
| pr_err("memory refresh error:\n"); |
| for_each_pipe(dev_priv, pipe) |
| pr_err("pipe %c stat: 0x%08x\n", |
| pipe_name(pipe), I915_READ(PIPESTAT(pipe))); |
| /* pipestat has already been acked */ |
| } |
| if (eir & I915_ERROR_INSTRUCTION) { |
| pr_err("instruction error\n"); |
| pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM)); |
| for (i = 0; i < ARRAY_SIZE(instdone); i++) |
| pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]); |
| if (INTEL_INFO(dev)->gen < 4) { |
| u32 ipeir = I915_READ(IPEIR); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD)); |
| I915_WRITE(IPEIR, ipeir); |
| POSTING_READ(IPEIR); |
| } else { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); |
| pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| POSTING_READ(IPEIR_I965); |
| } |
| } |
| |
| I915_WRITE(EIR, eir); |
| POSTING_READ(EIR); |
| eir = I915_READ(EIR); |
| if (eir) { |
| /* |
| * some errors might have become stuck, |
| * mask them. |
| */ |
| DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); |
| I915_WRITE(EMR, I915_READ(EMR) | eir); |
| I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| } |
| } |
| |
| /** |
| * i915_handle_error - handle a gpu error |
| * @dev: drm device |
| * @engine_mask: mask representing engines that are hung |
| * Do some basic checking of register state at error time and |
| * dump it to the syslog. Also call i915_capture_error_state() to make |
| * sure we get a record and make it available in debugfs. Fire a uevent |
| * so userspace knows something bad happened (should trigger collection |
| * of a ring dump etc.). |
| */ |
| void i915_handle_error(struct drm_device *dev, u32 engine_mask, |
| const char *fmt, ...) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| va_list args; |
| char error_msg[80]; |
| |
| va_start(args, fmt); |
| vscnprintf(error_msg, sizeof(error_msg), fmt, args); |
| va_end(args); |
| |
| i915_capture_error_state(dev, engine_mask, error_msg); |
| i915_report_and_clear_eir(dev); |
| |
| if (engine_mask) { |
| atomic_or(I915_RESET_IN_PROGRESS_FLAG, |
| &dev_priv->gpu_error.reset_counter); |
| |
| /* |
| * Wakeup waiting processes so that the reset function |
| * i915_reset_and_wakeup doesn't deadlock trying to grab |
| * various locks. By bumping the reset counter first, the woken |
| * processes will see a reset in progress and back off, |
| * releasing their locks and then wait for the reset completion. |
| * We must do this for _all_ gpu waiters that might hold locks |
| * that the reset work needs to acquire. |
| * |
| * Note: The wake_up serves as the required memory barrier to |
| * ensure that the waiters see the updated value of the reset |
| * counter atomic_t. |
| */ |
| i915_error_wake_up(dev_priv, false); |
| } |
| |
| i915_reset_and_wakeup(dev); |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static int i915_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (INTEL_INFO(dev)->gen >= 4) |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| else |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int ironlake_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) : |
| DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_enable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int valleyview_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int gen8_enable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static void i915_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_STATUS | |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ironlake_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) : |
| DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_disable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void valleyview_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void gen8_disable_vblank(struct drm_device *dev, unsigned int pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static bool |
| ring_idle(struct intel_engine_cs *engine, u32 seqno) |
| { |
| return i915_seqno_passed(seqno, |
| READ_ONCE(engine->last_submitted_seqno)); |
| } |
| |
| static bool |
| ipehr_is_semaphore_wait(struct drm_device *dev, u32 ipehr) |
| { |
| if (INTEL_INFO(dev)->gen >= 8) { |
| return (ipehr >> 23) == 0x1c; |
| } else { |
| ipehr &= ~MI_SEMAPHORE_SYNC_MASK; |
| return ipehr == (MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE | |
| MI_SEMAPHORE_REGISTER); |
| } |
| } |
| |
| static struct intel_engine_cs * |
| semaphore_wait_to_signaller_ring(struct intel_engine_cs *engine, u32 ipehr, |
| u64 offset) |
| { |
| struct drm_i915_private *dev_priv = engine->dev->dev_private; |
| struct intel_engine_cs *signaller; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 8) { |
| for_each_engine(signaller, dev_priv) { |
| if (engine == signaller) |
| continue; |
| |
| if (offset == signaller->semaphore.signal_ggtt[engine->id]) |
| return signaller; |
| } |
| } else { |
| u32 sync_bits = ipehr & MI_SEMAPHORE_SYNC_MASK; |
| |
| for_each_engine(signaller, dev_priv) { |
| if(engine == signaller) |
| continue; |
| |
| if (sync_bits == signaller->semaphore.mbox.wait[engine->id]) |
| return signaller; |
| } |
| } |
| |
| DRM_ERROR("No signaller ring found for ring %i, ipehr 0x%08x, offset 0x%016llx\n", |
| engine->id, ipehr, offset); |
| |
| return NULL; |
| } |
| |
| static struct intel_engine_cs * |
| semaphore_waits_for(struct intel_engine_cs *engine, u32 *seqno) |
| { |
| struct drm_i915_private *dev_priv = engine->dev->dev_private; |
| u32 cmd, ipehr, head; |
| u64 offset = 0; |
| int i, backwards; |
| |
| /* |
| * This function does not support execlist mode - any attempt to |
| * proceed further into this function will result in a kernel panic |
| * when dereferencing ring->buffer, which is not set up in execlist |
| * mode. |
| * |
| * The correct way of doing it would be to derive the currently |
| * executing ring buffer from the current context, which is derived |
| * from the currently running request. Unfortunately, to get the |
| * current request we would have to grab the struct_mutex before doing |
| * anything else, which would be ill-advised since some other thread |
| * might have grabbed it already and managed to hang itself, causing |
| * the hang checker to deadlock. |
| * |
| * Therefore, this function does not support execlist mode in its |
| * current form. Just return NULL and move on. |
| */ |
| if (engine->buffer == NULL) |
| return NULL; |
| |
| ipehr = I915_READ(RING_IPEHR(engine->mmio_base)); |
| if (!ipehr_is_semaphore_wait(engine->dev, ipehr)) |
| return NULL; |
| |
| /* |
| * HEAD is likely pointing to the dword after the actual command, |
| * so scan backwards until we find the MBOX. But limit it to just 3 |
| * or 4 dwords depending on the semaphore wait command size. |
| * Note that we don't care about ACTHD here since that might |
| * point at at batch, and semaphores are always emitted into the |
| * ringbuffer itself. |
| */ |
| head = I915_READ_HEAD(engine) & HEAD_ADDR; |
| backwards = (INTEL_INFO(engine->dev)->gen >= 8) ? 5 : 4; |
| |
| for (i = backwards; i; --i) { |
| /* |
| * Be paranoid and presume the hw has gone off into the wild - |
| * our ring is smaller than what the hardware (and hence |
| * HEAD_ADDR) allows. Also handles wrap-around. |
| */ |
| head &= engine->buffer->size - 1; |
| |
| /* This here seems to blow up */ |
| cmd = ioread32(engine->buffer->virtual_start + head); |
| if (cmd == ipehr) |
| break; |
| |
| head -= 4; |
| } |
| |
| if (!i) |
| return NULL; |
| |
| *seqno = ioread32(engine->buffer->virtual_start + head + 4) + 1; |
| if (INTEL_INFO(engine->dev)->gen >= 8) { |
| offset = ioread32(engine->buffer->virtual_start + head + 12); |
| offset <<= 32; |
| offset = ioread32(engine->buffer->virtual_start + head + 8); |
| } |
| return semaphore_wait_to_signaller_ring(engine, ipehr, offset); |
| } |
| |
| static int semaphore_passed(struct intel_engine_cs *engine) |
| { |
| struct drm_i915_private *dev_priv = engine->dev->dev_private; |
| struct intel_engine_cs *signaller; |
| u32 seqno; |
| |
| engine->hangcheck.deadlock++; |
| |
| signaller = semaphore_waits_for(engine, &seqno); |
| if (signaller == NULL) |
| return -1; |
| |
| /* Prevent pathological recursion due to driver bugs */ |
| if (signaller->hangcheck.deadlock >= I915_NUM_ENGINES) |
| return -1; |
| |
| if (i915_seqno_passed(signaller->get_seqno(signaller), seqno)) |
| return 1; |
| |
| /* cursory check for an unkickable deadlock */ |
| if (I915_READ_CTL(signaller) & RING_WAIT_SEMAPHORE && |
| semaphore_passed(signaller) < 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void semaphore_clear_deadlocks(struct drm_i915_private *dev_priv) |
| { |
| struct intel_engine_cs *engine; |
| |
| for_each_engine(engine, dev_priv) |
| engine->hangcheck.deadlock = 0; |
| } |
| |
| static bool subunits_stuck(struct intel_engine_cs *engine) |
| { |
| u32 instdone[I915_NUM_INSTDONE_REG]; |
| bool stuck; |
| int i; |
| |
| if (engine->id != RCS) |
| return true; |
| |
| i915_get_extra_instdone(engine->dev, instdone); |
| |
| /* There might be unstable subunit states even when |
| * actual head is not moving. Filter out the unstable ones by |
| * accumulating the undone -> done transitions and only |
| * consider those as progress. |
| */ |
| stuck = true; |
| for (i = 0; i < I915_NUM_INSTDONE_REG; i++) { |
| const u32 tmp = instdone[i] | engine->hangcheck.instdone[i]; |
| |
| if (tmp != engine->hangcheck.instdone[i]) |
| stuck = false; |
| |
| engine->hangcheck.instdone[i] |= tmp; |
| } |
| |
| return stuck; |
| } |
| |
| static enum intel_ring_hangcheck_action |
| head_stuck(struct intel_engine_cs *engine, u64 acthd) |
| { |
| if (acthd != engine->hangcheck.acthd) { |
| |
| /* Clear subunit states on head movement */ |
| memset(engine->hangcheck.instdone, 0, |
| sizeof(engine->hangcheck.instdone)); |
| |
| return HANGCHECK_ACTIVE; |
| } |
| |
| if (!subunits_stuck(engine)) |
| return HANGCHECK_ACTIVE; |
| |
| return HANGCHECK_HUNG; |
| } |
| |
| static enum intel_ring_hangcheck_action |
| ring_stuck(struct intel_engine_cs *engine, u64 acthd) |
| { |
| struct drm_device *dev = engine->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum intel_ring_hangcheck_action ha; |
| u32 tmp; |
| |
| ha = head_stuck(engine, acthd); |
| if (ha != HANGCHECK_HUNG) |
| return ha; |
| |
| if (IS_GEN2(dev)) |
| return HANGCHECK_HUNG; |
| |
| /* Is the chip hanging on a WAIT_FOR_EVENT? |
| * If so we can simply poke the RB_WAIT bit |
| * and break the hang. This should work on |
| * all but the second generation chipsets. |
| */ |
| tmp = I915_READ_CTL(engine); |
| if (tmp & RING_WAIT) { |
| i915_handle_error(dev, 0, |
| "Kicking stuck wait on %s", |
| engine->name); |
| I915_WRITE_CTL(engine, tmp); |
| return HANGCHECK_KICK; |
| } |
| |
| if (INTEL_INFO(dev)->gen >= 6 && tmp & RING_WAIT_SEMAPHORE) { |
| switch (semaphore_passed(engine)) { |
| default: |
| return HANGCHECK_HUNG; |
| case 1: |
| i915_handle_error(dev, 0, |
| "Kicking stuck semaphore on %s", |
| engine->name); |
| I915_WRITE_CTL(engine, tmp); |
| return HANGCHECK_KICK; |
| case 0: |
| return HANGCHECK_WAIT; |
| } |
| } |
| |
| return HANGCHECK_HUNG; |
| } |
| |
| static unsigned kick_waiters(struct intel_engine_cs *engine) |
| { |
| struct drm_i915_private *i915 = to_i915(engine->dev); |
| unsigned user_interrupts = READ_ONCE(engine->user_interrupts); |
| |
| if (engine->hangcheck.user_interrupts == user_interrupts && |
| !test_and_set_bit(engine->id, &i915->gpu_error.missed_irq_rings)) { |
| if (!(i915->gpu_error.test_irq_rings & intel_engine_flag(engine))) |
| DRM_ERROR("Hangcheck timer elapsed... %s idle\n", |
| engine->name); |
| else |
| DRM_INFO("Fake missed irq on %s\n", |
| engine->name); |
| wake_up_all(&engine->irq_queue); |
| } |
| |
| return user_interrupts; |
| } |
| /* |
| * This is called when the chip hasn't reported back with completed |
| * batchbuffers in a long time. We keep track per ring seqno progress and |
| * if there are no progress, hangcheck score for that ring is increased. |
| * Further, acthd is inspected to see if the ring is stuck. On stuck case |
| * we kick the ring. If we see no progress on three subsequent calls |
| * we assume chip is wedged and try to fix it by resetting the chip. |
| */ |
| static void i915_hangcheck_elapsed(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), |
| gpu_error.hangcheck_work.work); |
| struct drm_device *dev = dev_priv->dev; |
| struct intel_engine_cs *engine; |
| enum intel_engine_id id; |
| int busy_count = 0, rings_hung = 0; |
| bool stuck[I915_NUM_ENGINES] = { 0 }; |
| #define BUSY 1 |
| #define KICK 5 |
| #define HUNG 20 |
| #define ACTIVE_DECAY 15 |
| |
| if (!i915.enable_hangcheck) |
| return; |
| |
| /* |
| * The hangcheck work is synced during runtime suspend, we don't |
| * require a wakeref. TODO: instead of disabling the asserts make |
| * sure that we hold a reference when this work is running. |
| */ |
| DISABLE_RPM_WAKEREF_ASSERTS(dev_priv); |
| |
| /* As enabling the GPU requires fairly extensive mmio access, |
| * periodically arm the mmio checker to see if we are triggering |
| * any invalid access. |
| */ |
| intel_uncore_arm_unclaimed_mmio_detection(dev_priv); |
| |
| for_each_engine_id(engine, dev_priv, id) { |
| u64 acthd; |
| u32 seqno; |
| unsigned user_interrupts; |
| bool busy = true; |
| |
| semaphore_clear_deadlocks(dev_priv); |
| |
| /* We don't strictly need an irq-barrier here, as we are not |
| * serving an interrupt request, be paranoid in case the |
| * barrier has side-effects (such as preventing a broken |
| * cacheline snoop) and so be sure that we can see the seqno |
| * advance. If the seqno should stick, due to a stale |
| * cacheline, we would erroneously declare the GPU hung. |
| */ |
| if (engine->irq_seqno_barrier) |
| engine->irq_seqno_barrier(engine); |
| |
| acthd = intel_ring_get_active_head(engine); |
| seqno = engine->get_seqno(engine); |
| |
| /* Reset stuck interrupts between batch advances */ |
| user_interrupts = 0; |
| |
| if (engine->hangcheck.seqno == seqno) { |
| if (ring_idle(engine, seqno)) { |
| engine->hangcheck.action = HANGCHECK_IDLE; |
| if (waitqueue_active(&engine->irq_queue)) { |
| /* Safeguard against driver failure */ |
| user_interrupts = kick_waiters(engine); |
| engine->hangcheck.score += BUSY; |
| } else |
| busy = false; |
| } else { |
| /* We always increment the hangcheck score |
| * if the ring is busy and still processing |
| * the same request, so that no single request |
| * can run indefinitely (such as a chain of |
| * batches). The only time we do not increment |
| * the hangcheck score on this ring, if this |
| * ring is in a legitimate wait for another |
| * ring. In that case the waiting ring is a |
| * victim and we want to be sure we catch the |
| * right culprit. Then every time we do kick |
| * the ring, add a small increment to the |
| * score so that we can catch a batch that is |
| * being repeatedly kicked and so responsible |
| * for stalling the machine. |
| */ |
| engine->hangcheck.action = ring_stuck(engine, |
| acthd); |
| |
| switch (engine->hangcheck.action) { |
| case HANGCHECK_IDLE: |
| case HANGCHECK_WAIT: |
| break; |
| case HANGCHECK_ACTIVE: |
| engine->hangcheck.score += BUSY; |
| break; |
| case HANGCHECK_KICK: |
| engine->hangcheck.score += KICK; |
| break; |
| case HANGCHECK_HUNG: |
| engine->hangcheck.score += HUNG; |
| stuck[id] = true; |
| break; |
| } |
| } |
| } else { |
| engine->hangcheck.action = HANGCHECK_ACTIVE; |
| |
| /* Gradually reduce the count so that we catch DoS |
| * attempts across multiple batches. |
| */ |
| if (engine->hangcheck.score > 0) |
| engine->hangcheck.score -= ACTIVE_DECAY; |
| if (engine->hangcheck.score < 0) |
| engine->hangcheck.score = 0; |
| |
| /* Clear head and subunit states on seqno movement */ |
| acthd = 0; |
| |
| memset(engine->hangcheck.instdone, 0, |
| sizeof(engine->hangcheck.instdone)); |
| } |
| |
| engine->hangcheck.seqno = seqno; |
| engine->hangcheck.acthd = acthd; |
| engine->hangcheck.user_interrupts = user_interrupts; |
| busy_count += busy; |
| } |
| |
| for_each_engine_id(engine, dev_priv, id) { |
| if (engine->hangcheck.score >= HANGCHECK_SCORE_RING_HUNG) { |
| DRM_INFO("%s on %s\n", |
| stuck[id] ? "stuck" : "no progress", |
| engine->name); |
| rings_hung |= intel_engine_flag(engine); |
| } |
| } |
| |
| if (rings_hung) { |
| i915_handle_error(dev, rings_hung, "Engine(s) hung"); |
| goto out; |
| } |
| |
| if (busy_count) |
| /* Reset timer case chip hangs without another request |
| * being added */ |
| i915_queue_hangcheck(dev); |
| |
| out: |
| ENABLE_RPM_WAKEREF_ASSERTS(dev_priv); |
| } |
| |
| void i915_queue_hangcheck(struct drm_device *dev) |
| { |
| struct i915_gpu_error *e = &to_i915(dev)->gpu_error; |
| |
| if (!i915.enable_hangcheck) |
| return; |
| |
| /* Don't continually defer the hangcheck so that it is always run at |
| * least once after work has been scheduled on any ring. Otherwise, |
| * we will ignore a hung ring if a second ring is kept busy. |
| */ |
| |
| queue_delayed_work(e->hangcheck_wq, &e->hangcheck_work, |
| round_jiffies_up_relative(DRM_I915_HANGCHECK_JIFFIES)); |
| } |
| |
| static void ibx_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (HAS_PCH_NOP(dev)) |
| return; |
| |
| GEN5_IRQ_RESET(SDE); |
| |
| if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) |
| I915_WRITE(SERR_INT, 0xffffffff); |
| } |
| |
| /* |
| * SDEIER is also touched by the interrupt handler to work around missed PCH |
| * interrupts. Hence we can't update it after the interrupt handler is enabled - |
| * instead we unconditionally enable all PCH interrupt sources here, but then |
| * only unmask them as needed with SDEIMR. |
| * |
| * This function needs to be called before interrupts are enabled. |
| */ |
| static void ibx_irq_pre_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (HAS_PCH_NOP(dev)) |
| return; |
| |
| WARN_ON(I915_READ(SDEIER) != 0); |
| I915_WRITE(SDEIER, 0xffffffff); |
| POSTING_READ(SDEIER); |
| } |
| |
| static void gen5_gt_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| GEN5_IRQ_RESET(GT); |
| if (INTEL_INFO(dev)->gen >= 6) |
| GEN5_IRQ_RESET(GEN6_PM); |
| } |
| |
| static void vlv_display_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| enum pipe pipe; |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK_CHV); |
| else |
| I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK); |
| |
| i915_hotplug_interrupt_update_locked(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(PIPESTAT(pipe), |
| PIPE_FIFO_UNDERRUN_STATUS | |
| PIPESTAT_INT_STATUS_MASK); |
| dev_priv->pipestat_irq_mask[pipe] = 0; |
| } |
| |
| GEN5_IRQ_RESET(VLV_); |
| dev_priv->irq_mask = ~0; |
| } |
| |
| static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| u32 pipestat_mask; |
| u32 enable_mask; |
| enum pipe pipe; |
| |
| pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV | |
| PIPE_CRC_DONE_INTERRUPT_STATUS; |
| |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| for_each_pipe(dev_priv, pipe) |
| i915_enable_pipestat(dev_priv, pipe, pipestat_mask); |
| |
| enable_mask = I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| if (IS_CHERRYVIEW(dev_priv)) |
| enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; |
| |
| WARN_ON(dev_priv->irq_mask != ~0); |
| |
| dev_priv->irq_mask = ~enable_mask; |
| |
| GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| static void ironlake_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| GEN5_IRQ_RESET(DE); |
| if (IS_GEN7(dev)) |
| I915_WRITE(GEN7_ERR_INT, 0xffffffff); |
| |
| gen5_gt_irq_reset(dev); |
| |
| ibx_irq_reset(dev); |
| } |
| |
| static void valleyview_irq_preinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(VLV_MASTER_IER, 0); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| gen5_gt_irq_reset(dev); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void gen8_gt_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| GEN8_IRQ_RESET_NDX(GT, 0); |
| GEN8_IRQ_RESET_NDX(GT, 1); |
| GEN8_IRQ_RESET_NDX(GT, 2); |
| GEN8_IRQ_RESET_NDX(GT, 3); |
| } |
| |
| static void gen8_irq_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(dev_priv); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); |
| |
| GEN5_IRQ_RESET(GEN8_DE_PORT_); |
| GEN5_IRQ_RESET(GEN8_DE_MISC_); |
| GEN5_IRQ_RESET(GEN8_PCU_); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| ibx_irq_reset(dev); |
| } |
| |
| void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv, |
| unsigned int pipe_mask) |
| { |
| uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN; |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| ~dev_priv->de_irq_mask[pipe] | extra_ier); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv, |
| unsigned int pipe_mask) |
| { |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* make sure we're done processing display irqs */ |
| synchronize_irq(dev_priv->dev->irq); |
| } |
| |
| static void cherryview_irq_preinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(dev_priv); |
| |
| GEN5_IRQ_RESET(GEN8_PCU_); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static u32 intel_hpd_enabled_irqs(struct drm_device *dev, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder; |
| u32 enabled_irqs = 0; |
| |
| for_each_intel_encoder(dev, encoder) |
| if (dev_priv->hotplug.stats[encoder->hpd_pin].state == HPD_ENABLED) |
| enabled_irqs |= hpd[encoder->hpd_pin]; |
| |
| return enabled_irqs; |
| } |
| |
| static void ibx_hpd_irq_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_irqs, hotplug, enabled_irqs; |
| |
| if (HAS_PCH_IBX(dev)) { |
| hotplug_irqs = SDE_HOTPLUG_MASK; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_ibx); |
| } else { |
| hotplug_irqs = SDE_HOTPLUG_MASK_CPT; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_cpt); |
| } |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| /* |
| * Enable digital hotplug on the PCH, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec). |
| * The pulse duration bits are reserved on LPT+. |
| */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK); |
| hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; |
| hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; |
| hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; |
| /* |
| * When CPU and PCH are on the same package, port A |
| * HPD must be enabled in both north and south. |
| */ |
| if (HAS_PCH_LPT_LP(dev)) |
| hotplug |= PORTA_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void spt_hpd_irq_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_irqs, hotplug, enabled_irqs; |
| |
| hotplug_irqs = SDE_HOTPLUG_MASK_SPT; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_spt); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| /* Enable digital hotplug on the PCH */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTD_HOTPLUG_ENABLE | PORTC_HOTPLUG_ENABLE | |
| PORTB_HOTPLUG_ENABLE | PORTA_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG2); |
| hotplug |= PORTE_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG2, hotplug); |
| } |
| |
| static void ilk_hpd_irq_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_irqs, hotplug, enabled_irqs; |
| |
| if (INTEL_INFO(dev)->gen >= 8) { |
| hotplug_irqs = GEN8_PORT_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_bdw); |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else if (INTEL_INFO(dev)->gen >= 7) { |
| hotplug_irqs = DE_DP_A_HOTPLUG_IVB; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_ivb); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else { |
| hotplug_irqs = DE_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_ilk); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } |
| |
| /* |
| * Enable digital hotplug on the CPU, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec) |
| * The pulse duration bits are reserved on HSW+. |
| */ |
| hotplug = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| hotplug &= ~DIGITAL_PORTA_PULSE_DURATION_MASK; |
| hotplug |= DIGITAL_PORTA_HOTPLUG_ENABLE | DIGITAL_PORTA_PULSE_DURATION_2ms; |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, hotplug); |
| |
| ibx_hpd_irq_setup(dev); |
| } |
| |
| static void bxt_hpd_irq_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_irqs, hotplug, enabled_irqs; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_bxt); |
| hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK; |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTC_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE | |
| PORTA_HOTPLUG_ENABLE; |
| |
| DRM_DEBUG_KMS("Invert bit setting: hp_ctl:%x hp_port:%x\n", |
| hotplug, enabled_irqs); |
| hotplug &= ~BXT_DDI_HPD_INVERT_MASK; |
| |
| /* |
| * For BXT invert bit has to be set based on AOB design |
| * for HPD detection logic, update it based on VBT fields. |
| */ |
| |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_A)) |
| hotplug |= BXT_DDIA_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIB) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_B)) |
| hotplug |= BXT_DDIB_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIC) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_C)) |
| hotplug |= BXT_DDIC_HPD_INVERT; |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void ibx_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 mask; |
| |
| if (HAS_PCH_NOP(dev)) |
| return; |
| |
| if (HAS_PCH_IBX(dev)) |
| mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; |
| else |
| mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; |
| |
| gen5_assert_iir_is_zero(dev_priv, SDEIIR); |
| I915_WRITE(SDEIMR, ~mask); |
| } |
| |
| static void gen5_gt_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pm_irqs, gt_irqs; |
| |
| pm_irqs = gt_irqs = 0; |
| |
| dev_priv->gt_irq_mask = ~0; |
| if (HAS_L3_DPF(dev)) { |
| /* L3 parity interrupt is always unmasked. */ |
| dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev); |
| gt_irqs |= GT_PARITY_ERROR(dev); |
| } |
| |
| gt_irqs |= GT_RENDER_USER_INTERRUPT; |
| if (IS_GEN5(dev)) { |
| gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT | |
| ILK_BSD_USER_INTERRUPT; |
| } else { |
| gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT; |
| } |
| |
| GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs); |
| |
| if (INTEL_INFO(dev)->gen >= 6) { |
| /* |
| * RPS interrupts will get enabled/disabled on demand when RPS |
| * itself is enabled/disabled. |
| */ |
| if (HAS_VEBOX(dev)) |
| pm_irqs |= PM_VEBOX_USER_INTERRUPT; |
| |
| dev_priv->pm_irq_mask = 0xffffffff; |
| GEN5_IRQ_INIT(GEN6_PM, dev_priv->pm_irq_mask, pm_irqs); |
| } |
| } |
| |
| static int ironlake_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 display_mask, extra_mask; |
| |
| if (INTEL_INFO(dev)->gen >= 7) { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | |
| DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB | |
| DE_PLANEB_FLIP_DONE_IVB | |
| DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB); |
| extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | |
| DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB | |
| DE_DP_A_HOTPLUG_IVB); |
| } else { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | |
| DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE | |
| DE_AUX_CHANNEL_A | |
| DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE | |
| DE_POISON); |
| extra_mask = (DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT | |
| DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN | |
| DE_DP_A_HOTPLUG); |
| } |
| |
| dev_priv->irq_mask = ~display_mask; |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| |
| ibx_irq_pre_postinstall(dev); |
| |
| GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); |
| |
| gen5_gt_irq_postinstall(dev); |
| |
| ibx_irq_postinstall(dev); |
| |
| if (IS_IRONLAKE_M(dev)) { |
| /* Enable PCU event interrupts |
| * |
| * spinlocking not required here for correctness since interrupt |
| * setup is guaranteed to run in single-threaded context. But we |
| * need it to make the assert_spin_locked happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| ilk_enable_display_irq(dev_priv, DE_PCU_EVENT); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| return 0; |
| } |
| |
| void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| if (dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = true; |
| |
| if (intel_irqs_enabled(dev_priv)) { |
| vlv_display_irq_reset(dev_priv); |
| vlv_display_irq_postinstall(dev_priv); |
| } |
| } |
| |
| void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = false; |
| |
| if (intel_irqs_enabled(dev_priv)) |
| vlv_display_irq_reset(dev_priv); |
| } |
| |
| |
| static int valleyview_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| gen5_gt_irq_postinstall(dev); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| return 0; |
| } |
| |
| static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| /* These are interrupts we'll toggle with the ring mask register */ |
| uint32_t gt_interrupts[] = { |
| GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_RCS_IRQ_SHIFT | |
| GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT, |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT | |
| GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS2_IRQ_SHIFT, |
| 0, |
| GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT | |
| GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT |
| }; |
| |
| if (HAS_L3_DPF(dev_priv)) |
| gt_interrupts[0] |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT; |
| |
| dev_priv->pm_irq_mask = 0xffffffff; |
| GEN8_IRQ_INIT_NDX(GT, 0, ~gt_interrupts[0], gt_interrupts[0]); |
| GEN8_IRQ_INIT_NDX(GT, 1, ~gt_interrupts[1], gt_interrupts[1]); |
| /* |
| * RPS interrupts will get enabled/disabled on demand when RPS itself |
| * is enabled/disabled. |
| */ |
| GEN8_IRQ_INIT_NDX(GT, 2, dev_priv->pm_irq_mask, 0); |
| GEN8_IRQ_INIT_NDX(GT, 3, ~gt_interrupts[3], gt_interrupts[3]); |
| } |
| |
| static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE; |
| uint32_t de_pipe_enables; |
| u32 de_port_masked = GEN8_AUX_CHANNEL_A; |
| u32 de_port_enables; |
| enum pipe pipe; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 9) { |
| de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE | |
| GEN9_DE_PIPE_IRQ_FAULT_ERRORS; |
| de_port_masked |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | |
| GEN9_AUX_CHANNEL_D; |
| if (IS_BROXTON(dev_priv)) |
| de_port_masked |= BXT_DE_PORT_GMBUS; |
| } else { |
| de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE | |
| GEN8_DE_PIPE_IRQ_FAULT_ERRORS; |
| } |
| |
| de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | |
| GEN8_PIPE_FIFO_UNDERRUN; |
| |
| de_port_enables = de_port_masked; |
| if (IS_BROXTON(dev_priv)) |
| de_port_enables |= BXT_DE_PORT_HOTPLUG_MASK; |
| else if (IS_BROADWELL(dev_priv)) |
| de_port_enables |= GEN8_PORT_DP_A_HOTPLUG; |
| |
| dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked; |
| dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked; |
| dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked; |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| de_pipe_enables); |
| |
| GEN5_IRQ_INIT(GEN8_DE_PORT_, ~de_port_masked, de_port_enables); |
| } |
| |
| static int gen8_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (HAS_PCH_SPLIT(dev)) |
| ibx_irq_pre_postinstall(dev); |
| |
| gen8_gt_irq_postinstall(dev_priv); |
| gen8_de_irq_postinstall(dev_priv); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| ibx_irq_postinstall(dev); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| return 0; |
| } |
| |
| static int cherryview_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| gen8_gt_irq_postinstall(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| return 0; |
| } |
| |
| static void gen8_irq_uninstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| gen8_irq_reset(dev); |
| } |
| |
| static void valleyview_irq_uninstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| I915_WRITE(VLV_MASTER_IER, 0); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| gen5_gt_irq_reset(dev); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void cherryview_irq_uninstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(dev_priv); |
| |
| GEN5_IRQ_RESET(GEN8_PCU_); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void ironlake_irq_uninstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| ironlake_irq_reset(dev); |
| } |
| |
| static void i8xx_irq_preinstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| for_each_pipe(dev_priv, pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE16(IMR, 0xffff); |
| I915_WRITE16(IER, 0x0); |
| POSTING_READ16(IER); |
| } |
| |
| static int i8xx_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE16(EMR, |
| ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT); |
| I915_WRITE16(IMR, dev_priv->irq_mask); |
| |
| I915_WRITE16(IER, |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_USER_INTERRUPT); |
| POSTING_READ16(IER); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| return 0; |
| } |
| |
| /* |
| * Returns true when a page flip has completed. |
| */ |
| static bool i8xx_handle_vblank(struct drm_device *dev, |
| int plane, int pipe, u32 iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane); |
| |
| if (!intel_pipe_handle_vblank(dev, pipe)) |
| return false; |
| |
| if ((iir & flip_pending) == 0) |
| goto check_page_flip; |
| |
| /* We detect FlipDone by looking for the change in PendingFlip from '1' |
| * to '0' on the following vblank, i.e. IIR has the Pendingflip |
| * asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence |
| * the flip is completed (no longer pending). Since this doesn't raise |
| * an interrupt per se, we watch for the change at vblank. |
| */ |
| if (I915_READ16(ISR) & flip_pending) |
| goto check_page_flip; |
| |
| intel_prepare_page_flip(dev, plane); |
| intel_finish_page_flip(dev, pipe); |
| return true; |
| |
| check_page_flip: |
| intel_check_page_flip(dev, pipe); |
| return false; |
| } |
| |
| static irqreturn_t i8xx_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u16 iir, new_iir; |
| u32 pipe_stats[2]; |
| int pipe; |
| u16 flip_mask = |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| irqreturn_t ret; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| ret = IRQ_NONE; |
| iir = I915_READ16(IIR); |
| if (iir == 0) |
| goto out; |
| |
| while (iir & ~flip_mask) { |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock(&dev_priv->irq_lock); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & 0x8000ffff) |
| I915_WRITE(reg, pipe_stats[pipe]); |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| |
| I915_WRITE16(IIR, iir & ~flip_mask); |
| new_iir = I915_READ16(IIR); /* Flush posted writes */ |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[RCS]); |
| |
| for_each_pipe(dev_priv, pipe) { |
| int plane = pipe; |
| if (HAS_FBC(dev)) |
| plane = !plane; |
| |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS && |
| i8xx_handle_vblank(dev, plane, pipe, iir)) |
| flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane); |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, |
| pipe); |
| } |
| |
| iir = new_iir; |
| } |
| ret = IRQ_HANDLED; |
| |
| out: |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i8xx_irq_uninstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| /* Clear enable bits; then clear status bits */ |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe))); |
| } |
| I915_WRITE16(IMR, 0xffff); |
| I915_WRITE16(IER, 0x0); |
| I915_WRITE16(IIR, I915_READ16(IIR)); |
| } |
| |
| static void i915_irq_preinstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE16(HWSTAM, 0xeffe); |
| for_each_pipe(dev_priv, pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| POSTING_READ(IER); |
| } |
| |
| static int i915_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 enable_mask; |
| |
| I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| POSTING_READ(PORT_HOTPLUG_EN); |
| |
| /* Enable in IER... */ |
| enable_mask |= I915_DISPLAY_PORT_INTERRUPT; |
| /* and unmask in IMR */ |
| dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT; |
| } |
| |
| I915_WRITE(IMR, dev_priv->irq_mask); |
| I915_WRITE(IER, enable_mask); |
| POSTING_READ(IER); |
| |
| i915_enable_asle_pipestat(dev); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| return 0; |
| } |
| |
| /* |
| * Returns true when a page flip has completed. |
| */ |
| static bool i915_handle_vblank(struct drm_device *dev, |
| int plane, int pipe, u32 iir) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane); |
| |
| if (!intel_pipe_handle_vblank(dev, pipe)) |
| return false; |
| |
| if ((iir & flip_pending) == 0) |
| goto check_page_flip; |
| |
| /* We detect FlipDone by looking for the change in PendingFlip from '1' |
| * to '0' on the following vblank, i.e. IIR has the Pendingflip |
| * asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence |
| * the flip is completed (no longer pending). Since this doesn't raise |
| * an interrupt per se, we watch for the change at vblank. |
| */ |
| if (I915_READ(ISR) & flip_pending) |
| goto check_page_flip; |
| |
| intel_prepare_page_flip(dev, plane); |
| intel_finish_page_flip(dev, pipe); |
| return true; |
| |
| check_page_flip: |
| intel_check_page_flip(dev, pipe); |
| return false; |
| } |
| |
| static irqreturn_t i915_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 iir, new_iir, pipe_stats[I915_MAX_PIPES]; |
| u32 flip_mask = |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| int pipe, ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| iir = I915_READ(IIR); |
| do { |
| bool irq_received = (iir & ~flip_mask) != 0; |
| bool blc_event = false; |
| |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock(&dev_priv->irq_lock); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* Clear the PIPE*STAT regs before the IIR */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| I915_WRITE(reg, pipe_stats[pipe]); |
| irq_received = true; |
| } |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| |
| if (!irq_received) |
| break; |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if (I915_HAS_HOTPLUG(dev) && |
| iir & I915_DISPLAY_PORT_INTERRUPT) { |
| u32 hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev, hotplug_status); |
| } |
| |
| I915_WRITE(IIR, iir & ~flip_mask); |
| new_iir = I915_READ(IIR); /* Flush posted writes */ |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[RCS]); |
| |
| for_each_pipe(dev_priv, pipe) { |
| int plane = pipe; |
| if (HAS_FBC(dev)) |
| plane = !plane; |
| |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS && |
| i915_handle_vblank(dev, plane, pipe, iir)) |
| flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, |
| pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev); |
| |
| /* With MSI, interrupts are only generated when iir |
| * transitions from zero to nonzero. If another bit got |
| * set while we were handling the existing iir bits, then |
| * we would never get another interrupt. |
| * |
| * This is fine on non-MSI as well, as if we hit this path |
| * we avoid exiting the interrupt handler only to generate |
| * another one. |
| * |
| * Note that for MSI this could cause a stray interrupt report |
| * if an interrupt landed in the time between writing IIR and |
| * the posting read. This should be rare enough to never |
| * trigger the 99% of 100,000 interrupts test for disabling |
| * stray interrupts. |
| */ |
| ret = IRQ_HANDLED; |
| iir = new_iir; |
| } while (iir & ~flip_mask); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i915_irq_uninstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE16(HWSTAM, 0xffff); |
| for_each_pipe(dev_priv, pipe) { |
| /* Clear enable bits; then clear status bits */ |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe))); |
| } |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| I915_WRITE(IIR, I915_READ(IIR)); |
| } |
| |
| static void i965_irq_preinstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| for_each_pipe(dev_priv, pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| POSTING_READ(IER); |
| } |
| |
| static int i965_irq_postinstall(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 enable_mask; |
| u32 error_mask; |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| |
| enable_mask = ~dev_priv->irq_mask; |
| enable_mask &= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT); |
| enable_mask |= I915_USER_INTERRUPT; |
| |
| if (IS_G4X(dev)) |
| enable_mask |= I915_BSD_USER_INTERRUPT; |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* |
| * Enable some error detection, note the instruction error mask |
| * bit is reserved, so we leave it masked. |
| */ |
| if (IS_G4X(dev)) { |
| error_mask = ~(GM45_ERROR_PAGE_TABLE | |
| GM45_ERROR_MEM_PRIV | |
| GM45_ERROR_CP_PRIV | |
| I915_ERROR_MEMORY_REFRESH); |
| } else { |
| error_mask = ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH); |
| } |
| I915_WRITE(EMR, error_mask); |
| |
| I915_WRITE(IMR, dev_priv->irq_mask); |
| I915_WRITE(IER, enable_mask); |
| POSTING_READ(IER); |
| |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| POSTING_READ(PORT_HOTPLUG_EN); |
| |
| i915_enable_asle_pipestat(dev); |
| |
| return 0; |
| } |
| |
| static void i915_hpd_irq_setup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 hotplug_en; |
| |
| assert_spin_locked(&dev_priv->irq_lock); |
| |
| /* Note HDMI and DP share hotplug bits */ |
| /* enable bits are the same for all generations */ |
| hotplug_en = intel_hpd_enabled_irqs(dev, hpd_mask_i915); |
| /* Programming the CRT detection parameters tends |
| to generate a spurious hotplug event about three |
| seconds later. So just do it once. |
| */ |
| if (IS_G4X(dev)) |
| hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| |
| /* Ignore TV since it's buggy */ |
| i915_hotplug_interrupt_update_locked(dev_priv, |
| HOTPLUG_INT_EN_MASK | |
| CRT_HOTPLUG_VOLTAGE_COMPARE_MASK | |
| CRT_HOTPLUG_ACTIVATION_PERIOD_64, |
| hotplug_en); |
| } |
| |
| static irqreturn_t i965_irq_handler(int irq, void *arg) |
| { |
| struct drm_device *dev = arg; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 iir, new_iir; |
| u32 pipe_stats[I915_MAX_PIPES]; |
| int ret = IRQ_NONE, pipe; |
| u32 flip_mask = |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| iir = I915_READ(IIR); |
| |
| for (;;) { |
| bool irq_received = (iir & ~flip_mask) != 0; |
| bool blc_event = false; |
| |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock(&dev_priv->irq_lock); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| I915_WRITE(reg, pipe_stats[pipe]); |
| irq_received = true; |
| } |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| |
| if (!irq_received) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) { |
| u32 hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev, hotplug_status); |
| } |
| |
| I915_WRITE(IIR, iir & ~flip_mask); |
| new_iir = I915_READ(IIR); /* Flush posted writes */ |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[RCS]); |
| if (iir & I915_BSD_USER_INTERRUPT) |
| notify_ring(&dev_priv->engine[VCS]); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS && |
| i915_handle_vblank(dev, pipe, pipe, iir)) |
| flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev); |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev); |
| |
| /* With MSI, interrupts are only generated when iir |
| * transitions from zero to nonzero. If another bit got |
| * set while we were handling the existing iir bits, then |
| * we would never get another interrupt. |
| * |
| * This is fine on non-MSI as well, as if we hit this path |
| * we avoid exiting the interrupt handler only to generate |
| * another one. |
| * |
| * Note that for MSI this could cause a stray interrupt report |
| * if an interrupt landed in the time between writing IIR and |
| * the posting read. This should be rare enough to never |
| * trigger the 99% of 100,000 interrupts test for disabling |
| * stray interrupts. |
| */ |
| iir = new_iir; |
| } |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static void i965_irq_uninstall(struct drm_device * dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int pipe; |
| |
| if (!dev_priv) |
| return; |
| |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| for_each_pipe(dev_priv, pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| for_each_pipe(dev_priv, pipe) |
| I915_WRITE(PIPESTAT(pipe), |
| I915_READ(PIPESTAT(pipe)) & 0x8000ffff); |
| I915_WRITE(IIR, I915_READ(IIR)); |
| } |
| |
| /** |
| * intel_irq_init - initializes irq support |
| * @dev_priv: i915 device instance |
| * |
| * This function initializes all the irq support including work items, timers |
| * and all the vtables. It does not setup the interrupt itself though. |
| */ |
| void intel_irq_init(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| intel_hpd_init_work(dev_priv); |
| |
| INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work); |
| INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work); |
| |
| /* Let's track the enabled rps events */ |
| if (IS_VALLEYVIEW(dev_priv)) |
| /* WaGsvRC0ResidencyMethod:vlv */ |
| dev_priv->pm_rps_events = GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED; |
| else |
| dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS; |
| |
| INIT_DELAYED_WORK(&dev_priv->gpu_error.hangcheck_work, |
| i915_hangcheck_elapsed); |
| |
| if (IS_GEN2(dev_priv)) { |
| dev->max_vblank_count = 0; |
| dev->driver->get_vblank_counter = i8xx_get_vblank_counter; |
| } else if (IS_G4X(dev_priv) || INTEL_INFO(dev_priv)->gen >= 5) { |
| dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ |
| dev->driver->get_vblank_counter = g4x_get_vblank_counter; |
| } else { |
| dev->driver->get_vblank_counter = i915_get_vblank_counter; |
| dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ |
| } |
| |
| /* |
| * Opt out of the vblank disable timer on everything except gen2. |
| * Gen2 doesn't have a hardware frame counter and so depends on |
| * vblank interrupts to produce sane vblank seuquence numbers. |
| */ |
| if (!IS_GEN2(dev_priv)) |
| dev->vblank_disable_immediate = true; |
| |
| dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; |
| dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| dev->driver->irq_handler = cherryview_irq_handler; |
| dev->driver->irq_preinstall = cherryview_irq_preinstall; |
| dev->driver->irq_postinstall = cherryview_irq_postinstall; |
| dev->driver->irq_uninstall = cherryview_irq_uninstall; |
| dev->driver->enable_vblank = valleyview_enable_vblank; |
| dev->driver->disable_vblank = valleyview_disable_vblank; |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } else if (IS_VALLEYVIEW(dev_priv)) { |
| dev->driver->irq_handler = valleyview_irq_handler; |
| dev->driver->irq_preinstall = valleyview_irq_preinstall; |
| dev->driver->irq_postinstall = valleyview_irq_postinstall; |
| dev->driver->irq_uninstall = valleyview_irq_uninstall; |
| dev->driver->enable_vblank = valleyview_enable_vblank; |
| dev->driver->disable_vblank = valleyview_disable_vblank; |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } else if (INTEL_INFO(dev_priv)->gen >= 8) { |
| dev->driver->irq_handler = gen8_irq_handler; |
| dev->driver->irq_preinstall = gen8_irq_reset; |
| dev->driver->irq_postinstall = gen8_irq_postinstall; |
| dev->driver->irq_uninstall = gen8_irq_uninstall; |
| dev->driver->enable_vblank = gen8_enable_vblank; |
| dev->driver->disable_vblank = gen8_disable_vblank; |
| if (IS_BROXTON(dev)) |
| dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup; |
| else if (HAS_PCH_SPT(dev) || HAS_PCH_KBP(dev)) |
| dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup; |
| else |
| dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; |
| } else if (HAS_PCH_SPLIT(dev)) { |
| dev->driver->irq_handler = ironlake_irq_handler; |
| dev->driver->irq_preinstall = ironlake_irq_reset; |
| dev->driver->irq_postinstall = ironlake_irq_postinstall; |
| dev->driver->irq_uninstall = ironlake_irq_uninstall; |
| dev->driver->enable_vblank = ironlake_enable_vblank; |
| dev->driver->disable_vblank = ironlake_disable_vblank; |
| dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; |
| } else { |
| if (INTEL_INFO(dev_priv)->gen == 2) { |
| dev->driver->irq_preinstall = i8xx_irq_preinstall; |
| dev->driver->irq_postinstall = i8xx_irq_postinstall; |
| dev->driver->irq_handler = i8xx_irq_handler; |
| dev->driver->irq_uninstall = i8xx_irq_uninstall; |
| } else if (INTEL_INFO(dev_priv)->gen == 3) { |
| dev->driver->irq_preinstall = i915_irq_preinstall; |
| dev->driver->irq_postinstall = i915_irq_postinstall; |
| dev->driver->irq_uninstall = i915_irq_uninstall; |
| dev->driver->irq_handler = i915_irq_handler; |
| } else { |
| dev->driver->irq_preinstall = i965_irq_preinstall; |
| dev->driver->irq_postinstall = i965_irq_postinstall; |
| dev->driver->irq_uninstall = i965_irq_uninstall; |
| dev->driver->irq_handler = i965_irq_handler; |
| } |
| if (I915_HAS_HOTPLUG(dev_priv)) |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| dev->driver->enable_vblank = i915_enable_vblank; |
| dev->driver->disable_vblank = i915_disable_vblank; |
| } |
| } |
| |
| /** |
| * intel_irq_install - enables the hardware interrupt |
| * @dev_priv: i915 device instance |
| * |
| * This function enables the hardware interrupt handling, but leaves the hotplug |
| * handling still disabled. It is called after intel_irq_init(). |
| * |
| * In the driver load and resume code we need working interrupts in a few places |
| * but don't want to deal with the hassle of concurrent probe and hotplug |
| * workers. Hence the split into this two-stage approach. |
| */ |
| int intel_irq_install(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * We enable some interrupt sources in our postinstall hooks, so mark |
| * interrupts as enabled _before_ actually enabling them to avoid |
| * special cases in our ordering checks. |
| */ |
| dev_priv->pm.irqs_enabled = true; |
| |
| return drm_irq_install(dev_priv->dev, dev_priv->dev->pdev->irq); |
| } |
| |
| /** |
| * intel_irq_uninstall - finilizes all irq handling |
| * @dev_priv: i915 device instance |
| * |
| * This stops interrupt and hotplug handling and unregisters and frees all |
| * resources acquired in the init functions. |
| */ |
| void intel_irq_uninstall(struct drm_i915_private *dev_priv) |
| { |
| drm_irq_uninstall(dev_priv->dev); |
| intel_hpd_cancel_work(dev_priv); |
| dev_priv->pm.irqs_enabled = false; |
| } |
| |
| /** |
| * intel_runtime_pm_disable_interrupts - runtime interrupt disabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to disable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| dev_priv->dev->driver->irq_uninstall(dev_priv->dev); |
| dev_priv->pm.irqs_enabled = false; |
| synchronize_irq(dev_priv->dev->irq); |
| } |
| |
| /** |
| * intel_runtime_pm_enable_interrupts - runtime interrupt enabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to enable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| dev_priv->pm.irqs_enabled = true; |
| dev_priv->dev->driver->irq_preinstall(dev_priv->dev); |
| dev_priv->dev->driver->irq_postinstall(dev_priv->dev); |
| } |