arch/i386/kernel/time_hpet.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  *  linux/arch/i386/kernel/time_hpet.c
  *  This code largely copied from arch/x86_64/kernel/time.c
  *  See that file for credits.
  *
  *  2003-06-30    Venkatesh Pallipadi - Additional changes for HPET support
  */

 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/smp.h>

 #include <asm/timer.h>
 #include <asm/fixmap.h>
 #include <asm/apic.h>

 #include <linux/timex.h>
 #include <linux/config.h>

 #include <asm/hpet.h>
 #include <linux/hpet.h>

 static unsigned long hpet_period;	/* fsecs / HPET clock */
 unsigned long hpet_tick;		/* hpet clks count per tick */
 unsigned long hpet_address;		/* hpet memory map physical address */
 int hpet_use_timer;

 static int use_hpet; 		/* can be used for runtime check of hpet */
 static int boot_hpet_disable; 	/* boottime override for HPET timer */
 static void __iomem * hpet_virt_address;	/* hpet kernel virtual address */

 #define FSEC_TO_USEC (1000000000UL)

 int hpet_readl(unsigned long a)
 {
 	return readl(hpet_virt_address + a);
 }

 static void hpet_writel(unsigned long d, unsigned long a)
 {
 	writel(d, hpet_virt_address + a);
 }

 #ifdef CONFIG_X86_LOCAL_APIC
 /*
  * HPET counters dont wrap around on every tick. They just change the
  * comparator value and continue. Next tick can be caught by checking
  * for a change in the comparator value. Used in apic.c.
  */
 static void __devinit wait_hpet_tick(void)
 {
 	unsigned int start_cmp_val, end_cmp_val;

 	start_cmp_val = hpet_readl(HPET_T0_CMP);
 	do {
 		end_cmp_val = hpet_readl(HPET_T0_CMP);
 	} while (start_cmp_val == end_cmp_val);
 }
 #endif

 static int hpet_timer_stop_set_go(unsigned long tick)
 {
 	unsigned int cfg;

 	/*
 	 * Stop the timers and reset the main counter.
 	 */
 	cfg = hpet_readl(HPET_CFG);
 	cfg &= ~HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
 	hpet_writel(0, HPET_COUNTER);
 	hpet_writel(0, HPET_COUNTER + 4);

 	if (hpet_use_timer) {
 		/*
 		 * Set up timer 0, as periodic with first interrupt to happen at
 		 * hpet_tick, and period also hpet_tick.
 		 */
 		cfg = hpet_readl(HPET_T0_CFG);
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
 		hpet_writel(cfg, HPET_T0_CFG);

 		/*
 		 * The first write after writing TN_SETVAL to the config register sets
 		 * the counter value, the second write sets the threshold.
 		 */
 		hpet_writel(tick, HPET_T0_CMP);
 		hpet_writel(tick, HPET_T0_CMP);
 	}
 	/*
  	 * Go!
  	 */
 	cfg = hpet_readl(HPET_CFG);
 	if (hpet_use_timer)
 		cfg |= HPET_CFG_LEGACY;
 	cfg |= HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);

 	return 0;
 }

 /*
  * Check whether HPET was found by ACPI boot parse. If yes setup HPET
  * counter 0 for kernel base timer.
  */
 int __init hpet_enable(void)
 {
 	unsigned int id;
 	unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */
 	unsigned long hpet_tick_rem;

 	if (boot_hpet_disable)
 		return -1;

 	if (!hpet_address) {
 		return -1;
 	}
 	hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
 	/*
 	 * Read the period, compute tick and quotient.
 	 */
 	id = hpet_readl(HPET_ID);

 	/*
 	 * We are checking for value '1' or more in number field if
 	 * CONFIG_HPET_EMULATE_RTC is set because we will need an
 	 * additional timer for RTC emulation.
 	 * However, we can do with one timer otherwise using the
 	 * the single HPET timer for system time.
 	 */
 #ifdef CONFIG_HPET_EMULATE_RTC
 	if (!(id & HPET_ID_NUMBER))
 		return -1;
 #endif


 	hpet_period = hpet_readl(HPET_PERIOD);
 	if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD))
 		return -1;

 	/*
 	 * 64 bit math
 	 * First changing tick into fsec
 	 * Then 64 bit div to find number of hpet clk per tick
 	 */
 	ASM_MUL64_REG(tick_fsec_low, tick_fsec_high,
 			KERNEL_TICK_USEC, FSEC_TO_USEC);
 	ASM_DIV64_REG(hpet_tick, hpet_tick_rem,
 			hpet_period, tick_fsec_low, tick_fsec_high);

 	if (hpet_tick_rem > (hpet_period >> 1))
 		hpet_tick++; /* rounding the result */

 	hpet_use_timer = id & HPET_ID_LEGSUP;

 	if (hpet_timer_stop_set_go(hpet_tick))
 		return -1;

 	use_hpet = 1;

 #ifdef	CONFIG_HPET
 	{
 		struct hpet_data	hd;
 		unsigned int 		ntimer;

 		memset(&hd, 0, sizeof (hd));

 		ntimer = hpet_readl(HPET_ID);
 		ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
 		ntimer++;

 		/*
 		 * Register with driver.
 		 * Timer0 and Timer1 is used by platform.
 		 */
 		hd.hd_phys_address = hpet_address;
 		hd.hd_address = hpet_virt_address;
 		hd.hd_nirqs = ntimer;
 		hd.hd_flags = HPET_DATA_PLATFORM;
 		hpet_reserve_timer(&hd, 0);
 #ifdef	CONFIG_HPET_EMULATE_RTC
 		hpet_reserve_timer(&hd, 1);
 #endif
 		hd.hd_irq[0] = HPET_LEGACY_8254;
 		hd.hd_irq[1] = HPET_LEGACY_RTC;
 		if (ntimer > 2) {
 			struct hpet __iomem	*hpet;
 			struct hpet_timer __iomem *timer;
 			int			i;

 			hpet = hpet_virt_address;

 			for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
 				timer++, i++)
 				hd.hd_irq[i] = (timer->hpet_config &
 					Tn_INT_ROUTE_CNF_MASK) >>
 					Tn_INT_ROUTE_CNF_SHIFT;

 		}

 		hpet_alloc(&hd);
 	}
 #endif

 #ifdef CONFIG_X86_LOCAL_APIC
 	if (hpet_use_timer)
 		wait_timer_tick = wait_hpet_tick;
 #endif
 	return 0;
 }

 int hpet_reenable(void)
 {
 	return hpet_timer_stop_set_go(hpet_tick);
 }

 int is_hpet_enabled(void)
 {
 	return use_hpet;
 }

 int is_hpet_capable(void)
 {
 	if (!boot_hpet_disable && hpet_address)
 		return 1;
 	return 0;
 }

 static int __init hpet_setup(char* str)
 {
 	if (str) {
 		if (!strncmp("disable", str, 7))
 			boot_hpet_disable = 1;
 	}
 	return 1;
 }

 __setup("hpet=", hpet_setup);

 #ifdef CONFIG_HPET_EMULATE_RTC
 /* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
  * is enabled, we support RTC interrupt functionality in software.
  * RTC has 3 kinds of interrupts:
  * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
  *    is updated
  * 2) Alarm Interrupt - generate an interrupt at a specific time of day
  * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
  *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
  * (1) and (2) above are implemented using polling at a frequency of
  * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
  * overhead. (DEFAULT_RTC_INT_FREQ)
  * For (3), we use interrupts at 64Hz or user specified periodic
  * frequency, whichever is higher.
  */
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>

 extern irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);

 #define DEFAULT_RTC_INT_FREQ 	64
 #define RTC_NUM_INTS 		1

 static unsigned long UIE_on;
 static unsigned long prev_update_sec;

 static unsigned long AIE_on;
 static struct rtc_time alarm_time;

 static unsigned long PIE_on;
 static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;

 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
 static unsigned int hpet_t1_cmp; /* cached comparator register */

 /*
  * Timer 1 for RTC, we do not use periodic interrupt feature,
  * even if HPET supports periodic interrupts on Timer 1.
  * The reason being, to set up a periodic interrupt in HPET, we need to
  * stop the main counter. And if we do that everytime someone diables/enables
  * RTC, we will have adverse effect on main kernel timer running on Timer 0.
  * So, for the time being, simulate the periodic interrupt in software.
  *
  * hpet_rtc_timer_init() is called for the first time and during subsequent
  * interuppts reinit happens through hpet_rtc_timer_reinit().
  */
 int hpet_rtc_timer_init(void)
 {
 	unsigned int cfg, cnt;
 	unsigned long flags;

 	if (!is_hpet_enabled())
 		return 0;
 	/*
 	 * Set the counter 1 and enable the interrupts.
 	 */
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
 	else
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;

 	local_irq_save(flags);
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
 	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);

 	cfg = hpet_readl(HPET_T1_CFG);
 	cfg &= ~HPET_TN_PERIODIC;
 	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);

 	return 1;
 }

 static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;

 	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
 		cfg = hpet_readl(HPET_T1_CFG);
 		cfg &= ~HPET_TN_ENABLE;
 		hpet_writel(cfg, HPET_T1_CFG);
 		return;
 	}

 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
 	else
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;

 	/* It is more accurate to use the comparator value than current count.*/
 	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
 	hpet_t1_cmp = cnt;
 }

 /*
  * The functions below are called from rtc driver.
  * Return 0 if HPET is not being used.
  * Otherwise do the necessary changes and return 1.
  */
 int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
 {
 	if (!is_hpet_enabled())
 		return 0;

 	if (bit_mask & RTC_UIE)
 		UIE_on = 0;
 	if (bit_mask & RTC_PIE)
 		PIE_on = 0;
 	if (bit_mask & RTC_AIE)
 		AIE_on = 0;

 	return 1;
 }

 int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 {
 	int timer_init_reqd = 0;

 	if (!is_hpet_enabled())
 		return 0;

 	if (!(PIE_on | AIE_on | UIE_on))
 		timer_init_reqd = 1;

 	if (bit_mask & RTC_UIE) {
 		UIE_on = 1;
 	}
 	if (bit_mask & RTC_PIE) {
 		PIE_on = 1;
 		PIE_count = 0;
 	}
 	if (bit_mask & RTC_AIE) {
 		AIE_on = 1;
 	}

 	if (timer_init_reqd)
 		hpet_rtc_timer_init();

 	return 1;
 }

 int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
 {
 	if (!is_hpet_enabled())
 		return 0;

 	alarm_time.tm_hour = hrs;
 	alarm_time.tm_min = min;
 	alarm_time.tm_sec = sec;

 	return 1;
 }

 int hpet_set_periodic_freq(unsigned long freq)
 {
 	if (!is_hpet_enabled())
 		return 0;

 	PIE_freq = freq;
 	PIE_count = 0;

 	return 1;
 }

 int hpet_rtc_dropped_irq(void)
 {
 	if (!is_hpet_enabled())
 		return 0;

 	return 1;
 }

 irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct rtc_time curr_time;
 	unsigned long rtc_int_flag = 0;
 	int call_rtc_interrupt = 0;

 	hpet_rtc_timer_reinit();

 	if (UIE_on | AIE_on) {
 		rtc_get_rtc_time(&curr_time);
 	}
 	if (UIE_on) {
 		if (curr_time.tm_sec != prev_update_sec) {
 			/* Set update int info, call real rtc int routine */
 			call_rtc_interrupt = 1;
 			rtc_int_flag = RTC_UF;
 			prev_update_sec = curr_time.tm_sec;
 		}
 	}
 	if (PIE_on) {
 		PIE_count++;
 		if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
 			/* Set periodic int info, call real rtc int routine */
 			call_rtc_interrupt = 1;
 			rtc_int_flag |= RTC_PF;
 			PIE_count = 0;
 		}
 	}
 	if (AIE_on) {
 		if ((curr_time.tm_sec == alarm_time.tm_sec) &&
 		    (curr_time.tm_min == alarm_time.tm_min) &&
 		    (curr_time.tm_hour == alarm_time.tm_hour)) {
 			/* Set alarm int info, call real rtc int routine */
 			call_rtc_interrupt = 1;
 			rtc_int_flag |= RTC_AF;
 		}
 	}
 	if (call_rtc_interrupt) {
 		rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
 		rtc_interrupt(rtc_int_flag, dev_id, regs);
 	}
 	return IRQ_HANDLED;
 }
 #endif
	/*
	* linux/arch/i386/kernel/time_hpet.c
	* This code largely copied from arch/x86_64/kernel/time.c
	* See that file for credits.
	*
	* 2003-06-30 Venkatesh Pallipadi - Additional changes for HPET support
	*/

	#include <linux/errno.h>
	#include <linux/kernel.h>
	#include <linux/param.h>
	#include <linux/string.h>
	#include <linux/init.h>
	#include <linux/smp.h>

	#include <asm/timer.h>
	#include <asm/fixmap.h>
	#include <asm/apic.h>

	#include <linux/timex.h>
	#include <linux/config.h>

	#include <asm/hpet.h>
	#include <linux/hpet.h>

	static unsigned long hpet_period; /* fsecs / HPET clock */
	unsigned long hpet_tick; /* hpet clks count per tick */
	unsigned long hpet_address; /* hpet memory map physical address */
	int hpet_use_timer;

	static int use_hpet; /* can be used for runtime check of hpet */
	static int boot_hpet_disable; /* boottime override for HPET timer */
	static void __iomem * hpet_virt_address; /* hpet kernel virtual address */

	#define FSEC_TO_USEC (1000000000UL)

	int hpet_readl(unsigned long a)
	{
	return readl(hpet_virt_address + a);
	}

	static void hpet_writel(unsigned long d, unsigned long a)
	{
	writel(d, hpet_virt_address + a);
	}

	#ifdef CONFIG_X86_LOCAL_APIC
	/*
	* HPET counters dont wrap around on every tick. They just change the
	* comparator value and continue. Next tick can be caught by checking
	* for a change in the comparator value. Used in apic.c.
	*/
	static void __devinit wait_hpet_tick(void)
	{
	unsigned int start_cmp_val, end_cmp_val;

	start_cmp_val = hpet_readl(HPET_T0_CMP);
	do {
	end_cmp_val = hpet_readl(HPET_T0_CMP);
	} while (start_cmp_val == end_cmp_val);
	}
	#endif

	static int hpet_timer_stop_set_go(unsigned long tick)
	{
	unsigned int cfg;

	/*
	* Stop the timers and reset the main counter.
	*/
	cfg = hpet_readl(HPET_CFG);
	cfg &= ~HPET_CFG_ENABLE;
	hpet_writel(cfg, HPET_CFG);
	hpet_writel(0, HPET_COUNTER);
	hpet_writel(0, HPET_COUNTER + 4);

	if (hpet_use_timer) {
	/*
	* Set up timer 0, as periodic with first interrupt to happen at
	* hpet_tick, and period also hpet_tick.
	*/
	cfg = hpet_readl(HPET_T0_CFG);
	cfg \|= HPET_TN_ENABLE \| HPET_TN_PERIODIC \|
	HPET_TN_SETVAL \| HPET_TN_32BIT;
	hpet_writel(cfg, HPET_T0_CFG);

	/*
	* The first write after writing TN_SETVAL to the config register sets
	* the counter value, the second write sets the threshold.
	*/
	hpet_writel(tick, HPET_T0_CMP);
	hpet_writel(tick, HPET_T0_CMP);
	}
	/*
	* Go!
	*/
	cfg = hpet_readl(HPET_CFG);
	if (hpet_use_timer)
	cfg \|= HPET_CFG_LEGACY;
	cfg \|= HPET_CFG_ENABLE;
	hpet_writel(cfg, HPET_CFG);

	return 0;
	}

	/*
	* Check whether HPET was found by ACPI boot parse. If yes setup HPET
	* counter 0 for kernel base timer.
	*/
	int __init hpet_enable(void)
	{
	unsigned int id;
	unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */
	unsigned long hpet_tick_rem;

	if (boot_hpet_disable)
	return -1;

	if (!hpet_address) {
	return -1;
	}
	hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
	/*
	* Read the period, compute tick and quotient.
	*/
	id = hpet_readl(HPET_ID);

	/*
	* We are checking for value '1' or more in number field if
	* CONFIG_HPET_EMULATE_RTC is set because we will need an
	* additional timer for RTC emulation.
	* However, we can do with one timer otherwise using the
	* the single HPET timer for system time.
	*/
	#ifdef CONFIG_HPET_EMULATE_RTC
	if (!(id & HPET_ID_NUMBER))
	return -1;
	#endif


	hpet_period = hpet_readl(HPET_PERIOD);
	if ((hpet_period < HPET_MIN_PERIOD) \|\| (hpet_period > HPET_MAX_PERIOD))
	return -1;

	/*
	* 64 bit math
	* First changing tick into fsec
	* Then 64 bit div to find number of hpet clk per tick
	*/
	ASM_MUL64_REG(tick_fsec_low, tick_fsec_high,
	KERNEL_TICK_USEC, FSEC_TO_USEC);
	ASM_DIV64_REG(hpet_tick, hpet_tick_rem,
	hpet_period, tick_fsec_low, tick_fsec_high);

	if (hpet_tick_rem > (hpet_period >> 1))
	hpet_tick++; /* rounding the result */

	hpet_use_timer = id & HPET_ID_LEGSUP;

	if (hpet_timer_stop_set_go(hpet_tick))
	return -1;

	use_hpet = 1;

	#ifdef CONFIG_HPET
	{
	struct hpet_data hd;
	unsigned int ntimer;

	memset(&hd, 0, sizeof (hd));

	ntimer = hpet_readl(HPET_ID);
	ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
	ntimer++;

	/*
	* Register with driver.
	* Timer0 and Timer1 is used by platform.
	*/
	hd.hd_phys_address = hpet_address;
	hd.hd_address = hpet_virt_address;
	hd.hd_nirqs = ntimer;
	hd.hd_flags = HPET_DATA_PLATFORM;
	hpet_reserve_timer(&hd, 0);
	#ifdef CONFIG_HPET_EMULATE_RTC
	hpet_reserve_timer(&hd, 1);
	#endif
	hd.hd_irq[0] = HPET_LEGACY_8254;
	hd.hd_irq[1] = HPET_LEGACY_RTC;
	if (ntimer > 2) {
	struct hpet __iomem *hpet;
	struct hpet_timer __iomem *timer;
	int i;

	hpet = hpet_virt_address;

	for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
	timer++, i++)
	hd.hd_irq[i] = (timer->hpet_config &
	Tn_INT_ROUTE_CNF_MASK) >>
	Tn_INT_ROUTE_CNF_SHIFT;

	}

	hpet_alloc(&hd);
	}
	#endif

	#ifdef CONFIG_X86_LOCAL_APIC
	if (hpet_use_timer)
	wait_timer_tick = wait_hpet_tick;
	#endif
	return 0;
	}

	int hpet_reenable(void)
	{
	return hpet_timer_stop_set_go(hpet_tick);
	}

	int is_hpet_enabled(void)
	{
	return use_hpet;
	}

	int is_hpet_capable(void)
	{
	if (!boot_hpet_disable && hpet_address)
	return 1;
	return 0;
	}

	static int __init hpet_setup(char* str)
	{
	if (str) {
	if (!strncmp("disable", str, 7))
	boot_hpet_disable = 1;
	}
	return 1;
	}

	__setup("hpet=", hpet_setup);

	#ifdef CONFIG_HPET_EMULATE_RTC
	/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
	* is enabled, we support RTC interrupt functionality in software.
	* RTC has 3 kinds of interrupts:
	* 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
	* is updated
	* 2) Alarm Interrupt - generate an interrupt at a specific time of day
	* 3) Periodic Interrupt - generate periodic interrupt, with frequencies
	* 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
	* (1) and (2) above are implemented using polling at a frequency of
	* 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
	* overhead. (DEFAULT_RTC_INT_FREQ)
	* For (3), we use interrupts at 64Hz or user specified periodic
	* frequency, whichever is higher.
	*/
	#include <linux/mc146818rtc.h>
	#include <linux/rtc.h>

	extern irqreturn_t rtc_interrupt(int irq, void dev_id, struct pt_regs regs);

	#define DEFAULT_RTC_INT_FREQ 64
	#define RTC_NUM_INTS 1

	static unsigned long UIE_on;
	static unsigned long prev_update_sec;

	static unsigned long AIE_on;
	static struct rtc_time alarm_time;

	static unsigned long PIE_on;
	static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
	static unsigned long PIE_count;

	static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
	static unsigned int hpet_t1_cmp; /* cached comparator register */

	/*
	* Timer 1 for RTC, we do not use periodic interrupt feature,
	* even if HPET supports periodic interrupts on Timer 1.
	* The reason being, to set up a periodic interrupt in HPET, we need to
	* stop the main counter. And if we do that everytime someone diables/enables
	* RTC, we will have adverse effect on main kernel timer running on Timer 0.
	* So, for the time being, simulate the periodic interrupt in software.
	*
	* hpet_rtc_timer_init() is called for the first time and during subsequent
	* interuppts reinit happens through hpet_rtc_timer_reinit().
	*/
	int hpet_rtc_timer_init(void)
	{
	unsigned int cfg, cnt;
	unsigned long flags;

	if (!is_hpet_enabled())
	return 0;
	/*
	* Set the counter 1 and enable the interrupts.
	*/
	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
	hpet_rtc_int_freq = PIE_freq;
	else
	hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;

	local_irq_save(flags);
	cnt = hpet_readl(HPET_COUNTER);
	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
	hpet_writel(cnt, HPET_T1_CMP);
	hpet_t1_cmp = cnt;
	local_irq_restore(flags);

	cfg = hpet_readl(HPET_T1_CFG);
	cfg &= ~HPET_TN_PERIODIC;
	cfg \|= HPET_TN_ENABLE \| HPET_TN_32BIT;
	hpet_writel(cfg, HPET_T1_CFG);

	return 1;
	}

	static void hpet_rtc_timer_reinit(void)
	{
	unsigned int cfg, cnt;

	if (unlikely(!(PIE_on \| AIE_on \| UIE_on))) {
	cfg = hpet_readl(HPET_T1_CFG);
	cfg &= ~HPET_TN_ENABLE;
	hpet_writel(cfg, HPET_T1_CFG);
	return;
	}

	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
	hpet_rtc_int_freq = PIE_freq;
	else
	hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;

	/* It is more accurate to use the comparator value than current count.*/
	cnt = hpet_t1_cmp;
	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
	hpet_writel(cnt, HPET_T1_CMP);
	hpet_t1_cmp = cnt;
	}

	/*
	* The functions below are called from rtc driver.
	* Return 0 if HPET is not being used.
	* Otherwise do the necessary changes and return 1.
	*/
	int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
	{
	if (!is_hpet_enabled())
	return 0;

	if (bit_mask & RTC_UIE)
	UIE_on = 0;
	if (bit_mask & RTC_PIE)
	PIE_on = 0;
	if (bit_mask & RTC_AIE)
	AIE_on = 0;

	return 1;
	}

	int hpet_set_rtc_irq_bit(unsigned long bit_mask)
	{
	int timer_init_reqd = 0;

	if (!is_hpet_enabled())
	return 0;

	if (!(PIE_on \| AIE_on \| UIE_on))
	timer_init_reqd = 1;

	if (bit_mask & RTC_UIE) {
	UIE_on = 1;
	}
	if (bit_mask & RTC_PIE) {
	PIE_on = 1;
	PIE_count = 0;
	}
	if (bit_mask & RTC_AIE) {
	AIE_on = 1;
	}

	if (timer_init_reqd)
	hpet_rtc_timer_init();

	return 1;
	}

	int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
	{
	if (!is_hpet_enabled())
	return 0;

	alarm_time.tm_hour = hrs;
	alarm_time.tm_min = min;
	alarm_time.tm_sec = sec;

	return 1;
	}

	int hpet_set_periodic_freq(unsigned long freq)
	{
	if (!is_hpet_enabled())
	return 0;

	PIE_freq = freq;
	PIE_count = 0;

	return 1;
	}

	int hpet_rtc_dropped_irq(void)
	{
	if (!is_hpet_enabled())
	return 0;

	return 1;
	}

	irqreturn_t hpet_rtc_interrupt(int irq, void dev_id, struct pt_regs regs)
	{
	struct rtc_time curr_time;
	unsigned long rtc_int_flag = 0;
	int call_rtc_interrupt = 0;

	hpet_rtc_timer_reinit();

	if (UIE_on \| AIE_on) {
	rtc_get_rtc_time(&curr_time);
	}
	if (UIE_on) {
	if (curr_time.tm_sec != prev_update_sec) {
	/* Set update int info, call real rtc int routine */
	call_rtc_interrupt = 1;
	rtc_int_flag = RTC_UF;
	prev_update_sec = curr_time.tm_sec;
	}
	}
	if (PIE_on) {
	PIE_count++;
	if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
	/* Set periodic int info, call real rtc int routine */
	call_rtc_interrupt = 1;
	rtc_int_flag \|= RTC_PF;
	PIE_count = 0;
	}
	}
	if (AIE_on) {
	if ((curr_time.tm_sec == alarm_time.tm_sec) &&
	(curr_time.tm_min == alarm_time.tm_min) &&
	(curr_time.tm_hour == alarm_time.tm_hour)) {
	/* Set alarm int info, call real rtc int routine */
	call_rtc_interrupt = 1;
	rtc_int_flag \|= RTC_AF;
	}
	}
	if (call_rtc_interrupt) {
	rtc_int_flag \|= (RTC_IRQF \| (RTC_NUM_INTS << 8));
	rtc_interrupt(rtc_int_flag, dev_id, regs);
	}
	return IRQ_HANDLED;
	}
	#endif