| /* |
| * This file is part of wl18xx |
| * |
| * Copyright (C) 2011 Texas Instruments Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __WL18XX_CONF_H__ |
| #define __WL18XX_CONF_H__ |
| |
| #define WL18XX_CONF_MAGIC 0x10e100ca |
| #define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) |
| #define WL18XX_CONF_MASK 0x0000ffff |
| #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ |
| sizeof(struct wl18xx_priv_conf)) |
| |
| #define NUM_OF_CHANNELS_11_ABG 150 |
| #define NUM_OF_CHANNELS_11_P 7 |
| #define SRF_TABLE_LEN 16 |
| #define PIN_MUXING_SIZE 2 |
| #define WL18XX_TRACE_LOSS_GAPS_TX 10 |
| #define WL18XX_TRACE_LOSS_GAPS_RX 18 |
| |
| struct wl18xx_mac_and_phy_params { |
| u8 phy_standalone; |
| u8 spare0; |
| u8 enable_clpc; |
| u8 enable_tx_low_pwr_on_siso_rdl; |
| u8 auto_detect; |
| u8 dedicated_fem; |
| |
| u8 low_band_component; |
| |
| /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ |
| u8 low_band_component_type; |
| |
| u8 high_band_component; |
| |
| /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ |
| u8 high_band_component_type; |
| u8 number_of_assembled_ant2_4; |
| u8 number_of_assembled_ant5; |
| u8 pin_muxing_platform_options[PIN_MUXING_SIZE]; |
| u8 external_pa_dc2dc; |
| u8 tcxo_ldo_voltage; |
| u8 xtal_itrim_val; |
| u8 srf_state; |
| u8 srf1[SRF_TABLE_LEN]; |
| u8 srf2[SRF_TABLE_LEN]; |
| u8 srf3[SRF_TABLE_LEN]; |
| u8 io_configuration; |
| u8 sdio_configuration; |
| u8 settings; |
| u8 rx_profile; |
| u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG]; |
| u8 pwr_limit_reference_11_abg; |
| u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; |
| u8 pwr_limit_reference_11p; |
| u8 spare1[9]; |
| u8 spare2[9]; |
| u8 primary_clock_setting_time; |
| u8 clock_valid_on_wake_up; |
| u8 secondary_clock_setting_time; |
| u8 board_type; |
| /* enable point saturation */ |
| u8 psat; |
| /* low/medium/high Tx power in dBm for STA-HP BG */ |
| s8 low_power_val; |
| s8 med_power_val; |
| s8 high_power_val; |
| s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; |
| s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; |
| u8 tx_rf_margin; |
| /* low/medium/high Tx power in dBm for other role */ |
| s8 low_power_val_2nd; |
| s8 med_power_val_2nd; |
| s8 high_power_val_2nd; |
| |
| u8 padding[1]; |
| } __packed; |
| |
| enum wl18xx_ht_mode { |
| /* Default - use MIMO, fallback to SISO20 */ |
| HT_MODE_DEFAULT = 0, |
| |
| /* Wide - use SISO40 */ |
| HT_MODE_WIDE = 1, |
| |
| /* Use SISO20 */ |
| HT_MODE_SISO20 = 2, |
| }; |
| |
| struct wl18xx_ht_settings { |
| /* DEFAULT / WIDE / SISO20 */ |
| u8 mode; |
| } __packed; |
| |
| struct wl18xx_priv_conf { |
| /* Module params structures */ |
| struct wl18xx_ht_settings ht; |
| |
| /* this structure is copied wholesale to FW */ |
| struct wl18xx_mac_and_phy_params phy; |
| } __packed; |
| |
| #endif /* __WL18XX_CONF_H__ */ |