| /* |
| * Compaq Hot Plug Controller Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <greg@kroah.com> |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/proc_fs.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <asm/uaccess.h> |
| #include "cpqphp.h" |
| #include "cpqphp_nvram.h" |
| |
| |
| #define ROM_INT15_PHY_ADDR 0x0FF859 |
| #define READ_EV 0xD8A4 |
| #define WRITE_EV 0xD8A5 |
| |
| struct register_foo { |
| union { |
| unsigned long lword; /* eax */ |
| unsigned short word; /* ax */ |
| |
| struct { |
| unsigned char low; /* al */ |
| unsigned char high; /* ah */ |
| } byte; |
| } data; |
| |
| unsigned char opcode; /* see below */ |
| unsigned long length; /* if the reg. is a pointer, how much data */ |
| } __attribute__ ((packed)); |
| |
| struct all_reg { |
| struct register_foo eax_reg; |
| struct register_foo ebx_reg; |
| struct register_foo ecx_reg; |
| struct register_foo edx_reg; |
| struct register_foo edi_reg; |
| struct register_foo esi_reg; |
| struct register_foo eflags_reg; |
| } __attribute__ ((packed)); |
| |
| |
| struct ev_hrt_header { |
| u8 Version; |
| u8 num_of_ctrl; |
| u8 next; |
| }; |
| |
| struct ev_hrt_ctrl { |
| u8 bus; |
| u8 device; |
| u8 function; |
| u8 mem_avail; |
| u8 p_mem_avail; |
| u8 io_avail; |
| u8 bus_avail; |
| u8 next; |
| }; |
| |
| |
| static u8 evbuffer_init; |
| static u8 evbuffer_length; |
| static u8 evbuffer[1024]; |
| |
| static void __iomem *compaq_int15_entry_point; |
| |
| /* lock for ordering int15_bios_call() */ |
| static spinlock_t int15_lock; |
| |
| |
| /* This is a series of function that deals with |
| * setting & getting the hotplug resource table in some environment variable. |
| */ |
| |
| /* |
| * We really shouldn't be doing this unless there is a _very_ good reason to!!! |
| * greg k-h |
| */ |
| |
| |
| static u32 add_byte( u32 **p_buffer, u8 value, u32 *used, u32 *avail) |
| { |
| u8 **tByte; |
| |
| if ((*used + 1) > *avail) |
| return(1); |
| |
| *((u8*)*p_buffer) = value; |
| tByte = (u8**)p_buffer; |
| (*tByte)++; |
| *used+=1; |
| return(0); |
| } |
| |
| |
| static u32 add_dword( u32 **p_buffer, u32 value, u32 *used, u32 *avail) |
| { |
| if ((*used + 4) > *avail) |
| return(1); |
| |
| **p_buffer = value; |
| (*p_buffer)++; |
| *used+=4; |
| return(0); |
| } |
| |
| |
| /* |
| * check_for_compaq_ROM |
| * |
| * this routine verifies that the ROM OEM string is 'COMPAQ' |
| * |
| * returns 0 for non-Compaq ROM, 1 for Compaq ROM |
| */ |
| static int check_for_compaq_ROM (void __iomem *rom_start) |
| { |
| u8 temp1, temp2, temp3, temp4, temp5, temp6; |
| int result = 0; |
| |
| temp1 = readb(rom_start + 0xffea + 0); |
| temp2 = readb(rom_start + 0xffea + 1); |
| temp3 = readb(rom_start + 0xffea + 2); |
| temp4 = readb(rom_start + 0xffea + 3); |
| temp5 = readb(rom_start + 0xffea + 4); |
| temp6 = readb(rom_start + 0xffea + 5); |
| if ((temp1 == 'C') && |
| (temp2 == 'O') && |
| (temp3 == 'M') && |
| (temp4 == 'P') && |
| (temp5 == 'A') && |
| (temp6 == 'Q')) { |
| result = 1; |
| } |
| dbg ("%s - returned %d\n", __func__, result); |
| return result; |
| } |
| |
| |
| static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) |
| { |
| unsigned long flags; |
| int op = operation; |
| int ret_val; |
| |
| if (!compaq_int15_entry_point) |
| return -ENODEV; |
| |
| spin_lock_irqsave(&int15_lock, flags); |
| __asm__ ( |
| "xorl %%ebx,%%ebx\n" \ |
| "xorl %%edx,%%edx\n" \ |
| "pushf\n" \ |
| "push %%cs\n" \ |
| "cli\n" \ |
| "call *%6\n" |
| : "=c" (*buf_size), "=a" (ret_val) |
| : "a" (op), "c" (*buf_size), "S" (ev_name), |
| "D" (buffer), "m" (compaq_int15_entry_point) |
| : "%ebx", "%edx"); |
| spin_unlock_irqrestore(&int15_lock, flags); |
| |
| return((ret_val & 0xFF00) >> 8); |
| } |
| |
| |
| /* |
| * load_HRT |
| * |
| * Read the hot plug Resource Table from NVRAM |
| */ |
| static int load_HRT (void __iomem *rom_start) |
| { |
| u32 available; |
| u32 temp_dword; |
| u8 temp_byte = 0xFF; |
| u32 rc; |
| |
| if (!check_for_compaq_ROM(rom_start)) { |
| return -ENODEV; |
| } |
| |
| available = 1024; |
| |
| /* Now load the EV */ |
| temp_dword = available; |
| |
| rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword); |
| |
| evbuffer_length = temp_dword; |
| |
| /* We're maintaining the resource lists so write FF to invalidate old |
| * info |
| */ |
| temp_dword = 1; |
| |
| rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword); |
| |
| return rc; |
| } |
| |
| |
| /* |
| * store_HRT |
| * |
| * Save the hot plug Resource Table in NVRAM |
| */ |
| static u32 store_HRT (void __iomem *rom_start) |
| { |
| u32 *buffer; |
| u32 *pFill; |
| u32 usedbytes; |
| u32 available; |
| u32 temp_dword; |
| u32 rc; |
| u8 loop; |
| u8 numCtrl = 0; |
| struct controller *ctrl; |
| struct pci_resource *resNode; |
| struct ev_hrt_header *p_EV_header; |
| struct ev_hrt_ctrl *p_ev_ctrl; |
| |
| available = 1024; |
| |
| if (!check_for_compaq_ROM(rom_start)) { |
| return(1); |
| } |
| |
| buffer = (u32*) evbuffer; |
| |
| if (!buffer) |
| return(1); |
| |
| pFill = buffer; |
| usedbytes = 0; |
| |
| p_EV_header = (struct ev_hrt_header *) pFill; |
| |
| ctrl = cpqhp_ctrl_list; |
| |
| /* The revision of this structure */ |
| rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* The number of controllers */ |
| rc = add_byte( &pFill, 1, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| while (ctrl) { |
| p_ev_ctrl = (struct ev_hrt_ctrl *) pFill; |
| |
| numCtrl++; |
| |
| /* The bus number */ |
| rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* The device Number */ |
| rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* The function Number */ |
| rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* Skip the number of available entries */ |
| rc = add_dword( &pFill, 0, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* Figure out memory Available */ |
| |
| resNode = ctrl->mem_head; |
| |
| loop = 0; |
| |
| while (resNode) { |
| loop ++; |
| |
| /* base */ |
| rc = add_dword( &pFill, resNode->base, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* length */ |
| rc = add_dword( &pFill, resNode->length, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| resNode = resNode->next; |
| } |
| |
| /* Fill in the number of entries */ |
| p_ev_ctrl->mem_avail = loop; |
| |
| /* Figure out prefetchable memory Available */ |
| |
| resNode = ctrl->p_mem_head; |
| |
| loop = 0; |
| |
| while (resNode) { |
| loop ++; |
| |
| /* base */ |
| rc = add_dword( &pFill, resNode->base, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* length */ |
| rc = add_dword( &pFill, resNode->length, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| resNode = resNode->next; |
| } |
| |
| /* Fill in the number of entries */ |
| p_ev_ctrl->p_mem_avail = loop; |
| |
| /* Figure out IO Available */ |
| |
| resNode = ctrl->io_head; |
| |
| loop = 0; |
| |
| while (resNode) { |
| loop ++; |
| |
| /* base */ |
| rc = add_dword( &pFill, resNode->base, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* length */ |
| rc = add_dword( &pFill, resNode->length, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| resNode = resNode->next; |
| } |
| |
| /* Fill in the number of entries */ |
| p_ev_ctrl->io_avail = loop; |
| |
| /* Figure out bus Available */ |
| |
| resNode = ctrl->bus_head; |
| |
| loop = 0; |
| |
| while (resNode) { |
| loop ++; |
| |
| /* base */ |
| rc = add_dword( &pFill, resNode->base, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| /* length */ |
| rc = add_dword( &pFill, resNode->length, &usedbytes, &available); |
| if (rc) |
| return(rc); |
| |
| resNode = resNode->next; |
| } |
| |
| /* Fill in the number of entries */ |
| p_ev_ctrl->bus_avail = loop; |
| |
| ctrl = ctrl->next; |
| } |
| |
| p_EV_header->num_of_ctrl = numCtrl; |
| |
| /* Now store the EV */ |
| |
| temp_dword = usedbytes; |
| |
| rc = access_EV(WRITE_EV, "CQTHPS", (u8*) buffer, &temp_dword); |
| |
| dbg("usedbytes = 0x%x, length = 0x%x\n", usedbytes, temp_dword); |
| |
| evbuffer_length = temp_dword; |
| |
| if (rc) { |
| err(msg_unable_to_save); |
| return(1); |
| } |
| |
| return(0); |
| } |
| |
| |
| void compaq_nvram_init (void __iomem *rom_start) |
| { |
| if (rom_start) { |
| compaq_int15_entry_point = (rom_start + ROM_INT15_PHY_ADDR - ROM_PHY_ADDR); |
| } |
| dbg("int15 entry = %p\n", compaq_int15_entry_point); |
| |
| /* initialize our int15 lock */ |
| spin_lock_init(&int15_lock); |
| } |
| |
| |
| int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) |
| { |
| u8 bus, device, function; |
| u8 nummem, numpmem, numio, numbus; |
| u32 rc; |
| u8 *p_byte; |
| struct pci_resource *mem_node; |
| struct pci_resource *p_mem_node; |
| struct pci_resource *io_node; |
| struct pci_resource *bus_node; |
| struct ev_hrt_ctrl *p_ev_ctrl; |
| struct ev_hrt_header *p_EV_header; |
| |
| if (!evbuffer_init) { |
| /* Read the resource list information in from NVRAM */ |
| if (load_HRT(rom_start)) |
| memset (evbuffer, 0, 1024); |
| |
| evbuffer_init = 1; |
| } |
| |
| /* If we saved information in NVRAM, use it now */ |
| p_EV_header = (struct ev_hrt_header *) evbuffer; |
| |
| /* The following code is for systems where version 1.0 of this |
| * driver has been loaded, but doesn't support the hardware. |
| * In that case, the driver would incorrectly store something |
| * in NVRAM. |
| */ |
| if ((p_EV_header->Version == 2) || |
| ((p_EV_header->Version == 1) && !ctrl->push_flag)) { |
| p_byte = &(p_EV_header->next); |
| |
| p_ev_ctrl = (struct ev_hrt_ctrl *) &(p_EV_header->next); |
| |
| p_byte += 3; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) |
| return 2; |
| |
| bus = p_ev_ctrl->bus; |
| device = p_ev_ctrl->device; |
| function = p_ev_ctrl->function; |
| |
| while ((bus != ctrl->bus) || |
| (device != PCI_SLOT(ctrl->pci_dev->devfn)) || |
| (function != PCI_FUNC(ctrl->pci_dev->devfn))) { |
| nummem = p_ev_ctrl->mem_avail; |
| numpmem = p_ev_ctrl->p_mem_avail; |
| numio = p_ev_ctrl->io_avail; |
| numbus = p_ev_ctrl->bus_avail; |
| |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) |
| return 2; |
| |
| /* Skip forward to the next entry */ |
| p_byte += (nummem + numpmem + numio + numbus) * 8; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) |
| return 2; |
| |
| p_ev_ctrl = (struct ev_hrt_ctrl *) p_byte; |
| |
| p_byte += 3; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) |
| return 2; |
| |
| bus = p_ev_ctrl->bus; |
| device = p_ev_ctrl->device; |
| function = p_ev_ctrl->function; |
| } |
| |
| nummem = p_ev_ctrl->mem_avail; |
| numpmem = p_ev_ctrl->p_mem_avail; |
| numio = p_ev_ctrl->io_avail; |
| numbus = p_ev_ctrl->bus_avail; |
| |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) |
| return 2; |
| |
| while (nummem--) { |
| mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); |
| |
| if (!mem_node) |
| break; |
| |
| mem_node->base = *(u32*)p_byte; |
| dbg("mem base = %8.8x\n",mem_node->base); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(mem_node); |
| return 2; |
| } |
| |
| mem_node->length = *(u32*)p_byte; |
| dbg("mem length = %8.8x\n",mem_node->length); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(mem_node); |
| return 2; |
| } |
| |
| mem_node->next = ctrl->mem_head; |
| ctrl->mem_head = mem_node; |
| } |
| |
| while (numpmem--) { |
| p_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); |
| |
| if (!p_mem_node) |
| break; |
| |
| p_mem_node->base = *(u32*)p_byte; |
| dbg("pre-mem base = %8.8x\n",p_mem_node->base); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(p_mem_node); |
| return 2; |
| } |
| |
| p_mem_node->length = *(u32*)p_byte; |
| dbg("pre-mem length = %8.8x\n",p_mem_node->length); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(p_mem_node); |
| return 2; |
| } |
| |
| p_mem_node->next = ctrl->p_mem_head; |
| ctrl->p_mem_head = p_mem_node; |
| } |
| |
| while (numio--) { |
| io_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); |
| |
| if (!io_node) |
| break; |
| |
| io_node->base = *(u32*)p_byte; |
| dbg("io base = %8.8x\n",io_node->base); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(io_node); |
| return 2; |
| } |
| |
| io_node->length = *(u32*)p_byte; |
| dbg("io length = %8.8x\n",io_node->length); |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(io_node); |
| return 2; |
| } |
| |
| io_node->next = ctrl->io_head; |
| ctrl->io_head = io_node; |
| } |
| |
| while (numbus--) { |
| bus_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); |
| |
| if (!bus_node) |
| break; |
| |
| bus_node->base = *(u32*)p_byte; |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(bus_node); |
| return 2; |
| } |
| |
| bus_node->length = *(u32*)p_byte; |
| p_byte += 4; |
| |
| if (p_byte > ((u8*)p_EV_header + evbuffer_length)) { |
| kfree(bus_node); |
| return 2; |
| } |
| |
| bus_node->next = ctrl->bus_head; |
| ctrl->bus_head = bus_node; |
| } |
| |
| /* If all of the following fail, we don't have any resources for |
| * hot plug add |
| */ |
| rc = 1; |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head)); |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head)); |
| |
| if (rc) |
| return(rc); |
| } else { |
| if ((evbuffer[0] != 0) && (!ctrl->push_flag)) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| int compaq_nvram_store (void __iomem *rom_start) |
| { |
| int rc = 1; |
| |
| if (rom_start == NULL) |
| return -ENODEV; |
| |
| if (evbuffer_init) { |
| rc = store_HRT(rom_start); |
| if (rc) { |
| err(msg_unable_to_save); |
| } |
| } |
| return rc; |
| } |
| |