| /* |
| * L2C-310 early resume code. This can be used by platforms to restore |
| * the settings of their L2 cache controller before restoring the |
| * processor state. |
| * |
| * This code can only be used to if you are running in the secure world. |
| */ |
| #include <linux/linkage.h> |
| #include <asm/hardware/cache-l2x0.h> |
| |
| .text |
| |
| ENTRY(l2c310_early_resume) |
| adr r0, 1f |
| ldr r2, [r0] |
| add r0, r2, r0 |
| |
| ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} |
| @ r1 = phys address of L2C-310 controller |
| @ r2 = aux_ctrl |
| @ r3 = tag_latency |
| @ r4 = data_latency |
| @ r5 = filter_start |
| @ r6 = filter_end |
| @ r7 = prefetch_ctrl |
| @ r8 = pwr_ctrl |
| |
| @ Check that the address has been initialised |
| teq r1, #0 |
| moveq pc, lr |
| |
| @ The prefetch and power control registers are revision dependent |
| @ and can be written whether or not the L2 cache is enabled |
| ldr r0, [r1, #L2X0_CACHE_ID] |
| and r0, r0, #L2X0_CACHE_ID_RTL_MASK |
| cmp r0, #L310_CACHE_ID_RTL_R2P0 |
| strcs r7, [r1, #L310_PREFETCH_CTRL] |
| cmp r0, #L310_CACHE_ID_RTL_R3P0 |
| strcs r8, [r1, #L310_POWER_CTRL] |
| |
| @ Don't setup the L2 cache if it is already enabled |
| ldr r0, [r1, #L2X0_CTRL] |
| tst r0, #L2X0_CTRL_EN |
| movne pc, lr |
| |
| str r3, [r1, #L310_TAG_LATENCY_CTRL] |
| str r4, [r1, #L310_DATA_LATENCY_CTRL] |
| str r6, [r1, #L310_ADDR_FILTER_END] |
| str r5, [r1, #L310_ADDR_FILTER_START] |
| |
| str r2, [r1, #L2X0_AUX_CTRL] |
| mov r9, #L2X0_CTRL_EN |
| str r9, [r1, #L2X0_CTRL] |
| mov pc, lr |
| ENDPROC(l2c310_early_resume) |
| |
| .align |
| 1: .long l2x0_saved_regs - . |