| /* |
| * acpi.c - Architecture-Specific Low-Level ACPI Support |
| * |
| * Copyright (C) 1999 VA Linux Systems |
| * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com> |
| * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co. |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| * Copyright (C) 2000 Intel Corp. |
| * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com> |
| * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com> |
| * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com> |
| * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de> |
| * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com> |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/irq.h> |
| #include <linux/acpi.h> |
| #include <linux/efi.h> |
| #include <linux/mmzone.h> |
| #include <linux/nodemask.h> |
| #include <asm/io.h> |
| #include <asm/iosapic.h> |
| #include <asm/machvec.h> |
| #include <asm/page.h> |
| #include <asm/system.h> |
| #include <asm/numa.h> |
| #include <asm/sal.h> |
| #include <asm/cyclone.h> |
| |
| #define BAD_MADT_ENTRY(entry, end) ( \ |
| (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ |
| ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) |
| |
| #define PREFIX "ACPI: " |
| |
| void (*pm_idle) (void); |
| EXPORT_SYMBOL(pm_idle); |
| void (*pm_power_off) (void); |
| EXPORT_SYMBOL(pm_power_off); |
| |
| unsigned int acpi_cpei_override; |
| unsigned int acpi_cpei_phys_cpuid; |
| |
| unsigned long acpi_wakeup_address = 0; |
| |
| const char __init * |
| acpi_get_sysname(void) |
| { |
| #ifdef CONFIG_IA64_GENERIC |
| unsigned long rsdp_phys; |
| struct acpi_table_rsdp *rsdp; |
| struct acpi_table_xsdt *xsdt; |
| struct acpi_table_header *hdr; |
| |
| rsdp_phys = acpi_find_rsdp(); |
| if (!rsdp_phys) { |
| printk(KERN_ERR |
| "ACPI 2.0 RSDP not found, default to \"dig\"\n"); |
| return "dig"; |
| } |
| |
| rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys); |
| if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) { |
| printk(KERN_ERR |
| "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); |
| return "dig"; |
| } |
| |
| xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address); |
| hdr = &xsdt->header; |
| if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { |
| printk(KERN_ERR |
| "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); |
| return "dig"; |
| } |
| |
| if (!strcmp(hdr->oem_id, "HP")) { |
| return "hpzx1"; |
| } else if (!strcmp(hdr->oem_id, "SGI")) { |
| return "sn2"; |
| } |
| |
| return "dig"; |
| #else |
| # if defined (CONFIG_IA64_HP_SIM) |
| return "hpsim"; |
| # elif defined (CONFIG_IA64_HP_ZX1) |
| return "hpzx1"; |
| # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) |
| return "hpzx1_swiotlb"; |
| # elif defined (CONFIG_IA64_SGI_SN2) |
| return "sn2"; |
| # elif defined (CONFIG_IA64_DIG) |
| return "dig"; |
| # else |
| # error Unknown platform. Fix acpi.c. |
| # endif |
| #endif |
| } |
| |
| #ifdef CONFIG_ACPI |
| |
| #define ACPI_MAX_PLATFORM_INTERRUPTS 256 |
| |
| /* Array to record platform interrupt vectors for generic interrupt routing. */ |
| int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { |
| [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 |
| }; |
| |
| enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; |
| |
| /* |
| * Interrupt routing API for device drivers. Provides interrupt vector for |
| * a generic platform event. Currently only CPEI is implemented. |
| */ |
| int acpi_request_vector(u32 int_type) |
| { |
| int vector = -1; |
| |
| if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) { |
| /* corrected platform error interrupt */ |
| vector = platform_intr_list[int_type]; |
| } else |
| printk(KERN_ERR |
| "acpi_request_vector(): invalid interrupt type\n"); |
| return vector; |
| } |
| |
| char *__acpi_map_table(unsigned long phys_addr, unsigned long size) |
| { |
| return __va(phys_addr); |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Boot-time Table Parsing |
| -------------------------------------------------------------------------- */ |
| |
| static int total_cpus __initdata; |
| static int available_cpus __initdata; |
| struct acpi_table_madt *acpi_madt __initdata; |
| static u8 has_8259; |
| |
| static int __init |
| acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, |
| const unsigned long end) |
| { |
| struct acpi_madt_local_apic_override *lapic; |
| |
| lapic = (struct acpi_madt_local_apic_override *)header; |
| |
| if (BAD_MADT_ENTRY(lapic, end)) |
| return -EINVAL; |
| |
| if (lapic->address) { |
| iounmap(ipi_base_addr); |
| ipi_base_addr = ioremap(lapic->address, 0); |
| } |
| return 0; |
| } |
| |
| static int __init |
| acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) |
| { |
| struct acpi_madt_local_sapic *lsapic; |
| |
| lsapic = (struct acpi_madt_local_sapic *)header; |
| |
| /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ |
| |
| if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { |
| #ifdef CONFIG_SMP |
| smp_boot_data.cpu_phys_id[available_cpus] = |
| (lsapic->id << 8) | lsapic->eid; |
| #endif |
| ++available_cpus; |
| } |
| |
| total_cpus++; |
| return 0; |
| } |
| |
| static int __init |
| acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) |
| { |
| struct acpi_madt_local_apic_nmi *lacpi_nmi; |
| |
| lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header; |
| |
| if (BAD_MADT_ENTRY(lacpi_nmi, end)) |
| return -EINVAL; |
| |
| /* TBD: Support lapic_nmi entries */ |
| return 0; |
| } |
| |
| static int __init |
| acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end) |
| { |
| struct acpi_madt_io_sapic *iosapic; |
| |
| iosapic = (struct acpi_madt_io_sapic *)header; |
| |
| if (BAD_MADT_ENTRY(iosapic, end)) |
| return -EINVAL; |
| |
| return iosapic_init(iosapic->address, iosapic->global_irq_base); |
| } |
| |
| static unsigned int __initdata acpi_madt_rev; |
| |
| static int __init |
| acpi_parse_plat_int_src(struct acpi_subtable_header * header, |
| const unsigned long end) |
| { |
| struct acpi_madt_interrupt_source *plintsrc; |
| int vector; |
| |
| plintsrc = (struct acpi_madt_interrupt_source *)header; |
| |
| if (BAD_MADT_ENTRY(plintsrc, end)) |
| return -EINVAL; |
| |
| /* |
| * Get vector assignment for this interrupt, set attributes, |
| * and program the IOSAPIC routing table. |
| */ |
| vector = iosapic_register_platform_intr(plintsrc->type, |
| plintsrc->global_irq, |
| plintsrc->io_sapic_vector, |
| plintsrc->eid, |
| plintsrc->id, |
| ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) == |
| ACPI_MADT_POLARITY_ACTIVE_HIGH) ? |
| IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, |
| ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) == |
| ACPI_MADT_TRIGGER_EDGE) ? |
| IOSAPIC_EDGE : IOSAPIC_LEVEL); |
| |
| platform_intr_list[plintsrc->type] = vector; |
| if (acpi_madt_rev > 1) { |
| acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE; |
| } |
| |
| /* |
| * Save the physical id, so we can check when its being removed |
| */ |
| acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| unsigned int can_cpei_retarget(void) |
| { |
| extern int cpe_vector; |
| extern unsigned int force_cpei_retarget; |
| |
| /* |
| * Only if CPEI is supported and the override flag |
| * is present, otherwise return that its re-targettable |
| * if we are in polling mode. |
| */ |
| if (cpe_vector > 0) { |
| if (acpi_cpei_override || force_cpei_retarget) |
| return 1; |
| else |
| return 0; |
| } |
| return 1; |
| } |
| |
| unsigned int is_cpu_cpei_target(unsigned int cpu) |
| { |
| unsigned int logical_id; |
| |
| logical_id = cpu_logical_id(acpi_cpei_phys_cpuid); |
| |
| if (logical_id == cpu) |
| return 1; |
| else |
| return 0; |
| } |
| |
| void set_cpei_target_cpu(unsigned int cpu) |
| { |
| acpi_cpei_phys_cpuid = cpu_physical_id(cpu); |
| } |
| #endif |
| |
| unsigned int get_cpei_target_cpu(void) |
| { |
| return acpi_cpei_phys_cpuid; |
| } |
| |
| static int __init |
| acpi_parse_int_src_ovr(struct acpi_subtable_header * header, |
| const unsigned long end) |
| { |
| struct acpi_madt_interrupt_override *p; |
| |
| p = (struct acpi_madt_interrupt_override *)header; |
| |
| if (BAD_MADT_ENTRY(p, end)) |
| return -EINVAL; |
| |
| iosapic_override_isa_irq(p->source_irq, p->global_irq, |
| ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == |
| ACPI_MADT_POLARITY_ACTIVE_HIGH) ? |
| IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, |
| ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) == |
| ACPI_MADT_TRIGGER_EDGE) ? |
| IOSAPIC_EDGE : IOSAPIC_LEVEL); |
| return 0; |
| } |
| |
| static int __init |
| acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) |
| { |
| struct acpi_madt_nmi_source *nmi_src; |
| |
| nmi_src = (struct acpi_madt_nmi_source *)header; |
| |
| if (BAD_MADT_ENTRY(nmi_src, end)) |
| return -EINVAL; |
| |
| /* TBD: Support nimsrc entries */ |
| return 0; |
| } |
| |
| static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) |
| { |
| if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { |
| |
| /* |
| * Unfortunately ITC_DRIFT is not yet part of the |
| * official SAL spec, so the ITC_DRIFT bit is not |
| * set by the BIOS on this hardware. |
| */ |
| sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT; |
| |
| cyclone_setup(); |
| } |
| } |
| |
| static int __init acpi_parse_madt(struct acpi_table_header *table) |
| { |
| if (!table) |
| return -EINVAL; |
| |
| acpi_madt = (struct acpi_table_madt *)table; |
| |
| acpi_madt_rev = acpi_madt->header.revision; |
| |
| /* remember the value for reference after free_initmem() */ |
| #ifdef CONFIG_ITANIUM |
| has_8259 = 1; /* Firmware on old Itanium systems is broken */ |
| #else |
| has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT; |
| #endif |
| iosapic_system_init(has_8259); |
| |
| /* Get base address of IPI Message Block */ |
| |
| if (acpi_madt->address) |
| ipi_base_addr = ioremap(acpi_madt->address, 0); |
| |
| printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); |
| |
| acpi_madt_oem_check(acpi_madt->header.oem_id, |
| acpi_madt->header.oem_table_id); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI_NUMA |
| |
| #undef SLIT_DEBUG |
| |
| #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) |
| |
| static int __initdata srat_num_cpus; /* number of cpus */ |
| static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; |
| #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) |
| #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) |
| static struct acpi_table_slit __initdata *slit_table; |
| |
| static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) |
| { |
| int pxm; |
| |
| pxm = pa->proximity_domain_lo; |
| if (ia64_platform_is("sn2")) |
| pxm += pa->proximity_domain_hi[0] << 8; |
| return pxm; |
| } |
| |
| static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) |
| { |
| int pxm; |
| |
| pxm = ma->proximity_domain; |
| if (!ia64_platform_is("sn2")) |
| pxm &= 0xff; |
| |
| return pxm; |
| } |
| |
| /* |
| * ACPI 2.0 SLIT (System Locality Information Table) |
| * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf |
| */ |
| void __init acpi_numa_slit_init(struct acpi_table_slit *slit) |
| { |
| u32 len; |
| |
| len = sizeof(struct acpi_table_header) + 8 |
| + slit->locality_count * slit->locality_count; |
| if (slit->header.length != len) { |
| printk(KERN_ERR |
| "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", |
| len, slit->header.length); |
| memset(numa_slit, 10, sizeof(numa_slit)); |
| return; |
| } |
| slit_table = slit; |
| } |
| |
| void __init |
| acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) |
| { |
| int pxm; |
| |
| if (!(pa->flags & ACPI_SRAT_CPU_ENABLED)) |
| return; |
| |
| pxm = get_processor_proximity_domain(pa); |
| |
| /* record this node in proximity bitmap */ |
| pxm_bit_set(pxm); |
| |
| node_cpuid[srat_num_cpus].phys_id = |
| (pa->apic_id << 8) | (pa->local_sapic_eid); |
| /* nid should be overridden as logical node id later */ |
| node_cpuid[srat_num_cpus].nid = pxm; |
| srat_num_cpus++; |
| } |
| |
| void __init |
| acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) |
| { |
| unsigned long paddr, size; |
| int pxm; |
| struct node_memblk_s *p, *q, *pend; |
| |
| pxm = get_memory_proximity_domain(ma); |
| |
| /* fill node memory chunk structure */ |
| paddr = ma->base_address; |
| size = ma->length; |
| |
| /* Ignore disabled entries */ |
| if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) |
| return; |
| |
| /* record this node in proximity bitmap */ |
| pxm_bit_set(pxm); |
| |
| /* Insertion sort based on base address */ |
| pend = &node_memblk[num_node_memblks]; |
| for (p = &node_memblk[0]; p < pend; p++) { |
| if (paddr < p->start_paddr) |
| break; |
| } |
| if (p < pend) { |
| for (q = pend - 1; q >= p; q--) |
| *(q + 1) = *q; |
| } |
| p->start_paddr = paddr; |
| p->size = size; |
| p->nid = pxm; |
| num_node_memblks++; |
| } |
| |
| void __init acpi_numa_arch_fixup(void) |
| { |
| int i, j, node_from, node_to; |
| |
| /* If there's no SRAT, fix the phys_id and mark node 0 online */ |
| if (srat_num_cpus == 0) { |
| node_set_online(0); |
| node_cpuid[0].phys_id = hard_smp_processor_id(); |
| return; |
| } |
| |
| /* |
| * MCD - This can probably be dropped now. No need for pxm ID to node ID |
| * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES. |
| */ |
| nodes_clear(node_online_map); |
| for (i = 0; i < MAX_PXM_DOMAINS; i++) { |
| if (pxm_bit_test(i)) { |
| int nid = acpi_map_pxm_to_node(i); |
| node_set_online(nid); |
| } |
| } |
| |
| /* set logical node id in memory chunk structure */ |
| for (i = 0; i < num_node_memblks; i++) |
| node_memblk[i].nid = pxm_to_node(node_memblk[i].nid); |
| |
| /* assign memory bank numbers for each chunk on each node */ |
| for_each_online_node(i) { |
| int bank; |
| |
| bank = 0; |
| for (j = 0; j < num_node_memblks; j++) |
| if (node_memblk[j].nid == i) |
| node_memblk[j].bank = bank++; |
| } |
| |
| /* set logical node id in cpu structure */ |
| for (i = 0; i < srat_num_cpus; i++) |
| node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid); |
| |
| printk(KERN_INFO "Number of logical nodes in system = %d\n", |
| num_online_nodes()); |
| printk(KERN_INFO "Number of memory chunks in system = %d\n", |
| num_node_memblks); |
| |
| if (!slit_table) |
| return; |
| memset(numa_slit, -1, sizeof(numa_slit)); |
| for (i = 0; i < slit_table->locality_count; i++) { |
| if (!pxm_bit_test(i)) |
| continue; |
| node_from = pxm_to_node(i); |
| for (j = 0; j < slit_table->locality_count; j++) { |
| if (!pxm_bit_test(j)) |
| continue; |
| node_to = pxm_to_node(j); |
| node_distance(node_from, node_to) = |
| slit_table->entry[i * slit_table->locality_count + j]; |
| } |
| } |
| |
| #ifdef SLIT_DEBUG |
| printk("ACPI 2.0 SLIT locality table:\n"); |
| for_each_online_node(i) { |
| for_each_online_node(j) |
| printk("%03d ", node_distance(i, j)); |
| printk("\n"); |
| } |
| #endif |
| } |
| #endif /* CONFIG_ACPI_NUMA */ |
| |
| /* |
| * success: return IRQ number (>=0) |
| * failure: return < 0 |
| */ |
| int acpi_register_gsi(u32 gsi, int triggering, int polarity) |
| { |
| if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) |
| return gsi; |
| |
| if (has_8259 && gsi < 16) |
| return isa_irq_to_vector(gsi); |
| |
| return iosapic_register_intr(gsi, |
| (polarity == |
| ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : |
| IOSAPIC_POL_LOW, |
| (triggering == |
| ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : |
| IOSAPIC_LEVEL); |
| } |
| |
| EXPORT_SYMBOL(acpi_register_gsi); |
| |
| void acpi_unregister_gsi(u32 gsi) |
| { |
| if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) |
| return; |
| |
| iosapic_unregister_intr(gsi); |
| } |
| |
| EXPORT_SYMBOL(acpi_unregister_gsi); |
| |
| static int __init acpi_parse_fadt(struct acpi_table_header *table) |
| { |
| struct acpi_table_header *fadt_header; |
| struct acpi_table_fadt *fadt; |
| |
| if (!table) |
| return -EINVAL; |
| |
| fadt_header = (struct acpi_table_header *)table; |
| if (fadt_header->revision != 3) |
| return -ENODEV; /* Only deal with ACPI 2.0 FADT */ |
| |
| fadt = (struct acpi_table_fadt *)fadt_header; |
| |
| acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); |
| return 0; |
| } |
| |
| unsigned long __init acpi_find_rsdp(void) |
| { |
| unsigned long rsdp_phys = 0; |
| |
| if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) |
| rsdp_phys = efi.acpi20; |
| else if (efi.acpi != EFI_INVALID_TABLE_ADDR) |
| printk(KERN_WARNING PREFIX |
| "v1.0/r0.71 tables no longer supported\n"); |
| return rsdp_phys; |
| } |
| |
| int __init acpi_boot_init(void) |
| { |
| |
| /* |
| * MADT |
| * ---- |
| * Parse the Multiple APIC Description Table (MADT), if exists. |
| * Note that this table provides platform SMP configuration |
| * information -- the successor to MPS tables. |
| */ |
| |
| if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { |
| printk(KERN_ERR PREFIX "Can't find MADT\n"); |
| goto skip_madt; |
| } |
| |
| /* Local APIC */ |
| |
| if (acpi_table_parse_madt |
| (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0) |
| printk(KERN_ERR PREFIX |
| "Error parsing LAPIC address override entry\n"); |
| |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS) |
| < 1) |
| printk(KERN_ERR PREFIX |
| "Error parsing MADT - no LAPIC entries\n"); |
| |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) |
| < 0) |
| printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); |
| |
| /* I/O APIC */ |
| |
| if (acpi_table_parse_madt |
| (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) |
| printk(KERN_ERR PREFIX |
| "Error parsing MADT - no IOSAPIC entries\n"); |
| |
| /* System-Level Interrupt Routing */ |
| |
| if (acpi_table_parse_madt |
| (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src, |
| ACPI_MAX_PLATFORM_INTERRUPTS) < 0) |
| printk(KERN_ERR PREFIX |
| "Error parsing platform interrupt source entry\n"); |
| |
| if (acpi_table_parse_madt |
| (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0) |
| printk(KERN_ERR PREFIX |
| "Error parsing interrupt source overrides entry\n"); |
| |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0) |
| printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); |
| skip_madt: |
| |
| /* |
| * FADT says whether a legacy keyboard controller is present. |
| * The FADT also contains an SCI_INT line, by which the system |
| * gets interrupts such as power and sleep buttons. If it's not |
| * on a Legacy interrupt, it needs to be setup. |
| */ |
| if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) |
| printk(KERN_ERR PREFIX "Can't find FADT\n"); |
| |
| #ifdef CONFIG_SMP |
| if (available_cpus == 0) { |
| printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); |
| printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); |
| smp_boot_data.cpu_phys_id[available_cpus] = |
| hard_smp_processor_id(); |
| available_cpus = 1; /* We've got at least one of these, no? */ |
| } |
| smp_boot_data.cpu_count = available_cpus; |
| |
| smp_build_cpu_map(); |
| # ifdef CONFIG_ACPI_NUMA |
| if (srat_num_cpus == 0) { |
| int cpu, i = 1; |
| for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) |
| if (smp_boot_data.cpu_phys_id[cpu] != |
| hard_smp_processor_id()) |
| node_cpuid[i++].phys_id = |
| smp_boot_data.cpu_phys_id[cpu]; |
| } |
| # endif |
| #endif |
| #ifdef CONFIG_ACPI_NUMA |
| build_cpu_to_node_map(); |
| #endif |
| /* Make boot-up look pretty */ |
| printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, |
| total_cpus); |
| return 0; |
| } |
| |
| int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) |
| { |
| int tmp; |
| |
| if (has_8259 && gsi < 16) |
| *irq = isa_irq_to_vector(gsi); |
| else { |
| tmp = gsi_to_irq(gsi); |
| if (tmp == -1) |
| return -1; |
| *irq = tmp; |
| } |
| return 0; |
| } |
| |
| /* |
| * ACPI based hotplug CPU support |
| */ |
| #ifdef CONFIG_ACPI_HOTPLUG_CPU |
| static |
| int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) |
| { |
| #ifdef CONFIG_ACPI_NUMA |
| int pxm_id; |
| int nid; |
| |
| pxm_id = acpi_get_pxm(handle); |
| /* |
| * We don't have cpu-only-node hotadd. But if the system equips |
| * SRAT table, pxm is already found and node is ready. |
| * So, just pxm_to_nid(pxm) is OK. |
| * This code here is for the system which doesn't have full SRAT |
| * table for possible cpus. |
| */ |
| nid = acpi_map_pxm_to_node(pxm_id); |
| node_cpuid[cpu].phys_id = physid; |
| node_cpuid[cpu].nid = nid; |
| #endif |
| return (0); |
| } |
| |
| int additional_cpus __initdata = -1; |
| |
| static __init int setup_additional_cpus(char *s) |
| { |
| if (s) |
| additional_cpus = simple_strtol(s, NULL, 0); |
| |
| return 0; |
| } |
| |
| early_param("additional_cpus", setup_additional_cpus); |
| |
| /* |
| * cpu_possible_map should be static, it cannot change as CPUs |
| * are onlined, or offlined. The reason is per-cpu data-structures |
| * are allocated by some modules at init time, and dont expect to |
| * do this dynamically on cpu arrival/departure. |
| * cpu_present_map on the other hand can change dynamically. |
| * In case when cpu_hotplug is not compiled, then we resort to current |
| * behaviour, which is cpu_possible == cpu_present. |
| * - Ashok Raj |
| * |
| * Three ways to find out the number of additional hotplug CPUs: |
| * - If the BIOS specified disabled CPUs in ACPI/mptables use that. |
| * - The user can overwrite it with additional_cpus=NUM |
| * - Otherwise don't reserve additional CPUs. |
| */ |
| __init void prefill_possible_map(void) |
| { |
| int i; |
| int possible, disabled_cpus; |
| |
| disabled_cpus = total_cpus - available_cpus; |
| |
| if (additional_cpus == -1) { |
| if (disabled_cpus > 0) |
| additional_cpus = disabled_cpus; |
| else |
| additional_cpus = 0; |
| } |
| |
| possible = available_cpus + additional_cpus; |
| |
| if (possible > NR_CPUS) |
| possible = NR_CPUS; |
| |
| printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", |
| possible, max((possible - available_cpus), 0)); |
| |
| for (i = 0; i < possible; i++) |
| cpu_set(i, cpu_possible_map); |
| } |
| |
| int acpi_map_lsapic(acpi_handle handle, int *pcpu) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| struct acpi_madt_local_sapic *lsapic; |
| cpumask_t tmp_map; |
| long physid; |
| int cpu; |
| |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) |
| return -EINVAL; |
| |
| if (!buffer.length || !buffer.pointer) |
| return -EINVAL; |
| |
| obj = buffer.pointer; |
| if (obj->type != ACPI_TYPE_BUFFER) |
| { |
| kfree(buffer.pointer); |
| return -EINVAL; |
| } |
| |
| lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer; |
| |
| if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) || |
| (!lsapic->lapic_flags & ACPI_MADT_ENABLED)) { |
| kfree(buffer.pointer); |
| return -EINVAL; |
| } |
| |
| physid = ((lsapic->id << 8) | (lsapic->eid)); |
| |
| kfree(buffer.pointer); |
| buffer.length = ACPI_ALLOCATE_BUFFER; |
| buffer.pointer = NULL; |
| |
| cpus_complement(tmp_map, cpu_present_map); |
| cpu = first_cpu(tmp_map); |
| if (cpu >= NR_CPUS) |
| return -EINVAL; |
| |
| acpi_map_cpu2node(handle, cpu, physid); |
| |
| cpu_set(cpu, cpu_present_map); |
| ia64_cpu_to_sapicid[cpu] = physid; |
| |
| *pcpu = cpu; |
| return (0); |
| } |
| |
| EXPORT_SYMBOL(acpi_map_lsapic); |
| |
| int acpi_unmap_lsapic(int cpu) |
| { |
| ia64_cpu_to_sapicid[cpu] = -1; |
| cpu_clear(cpu, cpu_present_map); |
| |
| #ifdef CONFIG_ACPI_NUMA |
| /* NUMA specific cleanup's */ |
| #endif |
| |
| return (0); |
| } |
| |
| EXPORT_SYMBOL(acpi_unmap_lsapic); |
| #endif /* CONFIG_ACPI_HOTPLUG_CPU */ |
| |
| #ifdef CONFIG_ACPI_NUMA |
| static acpi_status __devinit |
| acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| struct acpi_madt_io_sapic *iosapic; |
| unsigned int gsi_base; |
| int pxm, node; |
| |
| /* Only care about objects w/ a method that returns the MADT */ |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) |
| return AE_OK; |
| |
| if (!buffer.length || !buffer.pointer) |
| return AE_OK; |
| |
| obj = buffer.pointer; |
| if (obj->type != ACPI_TYPE_BUFFER || |
| obj->buffer.length < sizeof(*iosapic)) { |
| kfree(buffer.pointer); |
| return AE_OK; |
| } |
| |
| iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer; |
| |
| if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) { |
| kfree(buffer.pointer); |
| return AE_OK; |
| } |
| |
| gsi_base = iosapic->global_irq_base; |
| |
| kfree(buffer.pointer); |
| |
| /* |
| * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell |
| * us which node to associate this with. |
| */ |
| pxm = acpi_get_pxm(handle); |
| if (pxm < 0) |
| return AE_OK; |
| |
| node = pxm_to_node(pxm); |
| |
| if (node >= MAX_NUMNODES || !node_online(node) || |
| cpus_empty(node_to_cpumask(node))) |
| return AE_OK; |
| |
| /* We know a gsi to node mapping! */ |
| map_iosapic_to_node(gsi_base, node); |
| return AE_OK; |
| } |
| |
| static int __init |
| acpi_map_iosapics (void) |
| { |
| acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); |
| return 0; |
| } |
| |
| fs_initcall(acpi_map_iosapics); |
| #endif /* CONFIG_ACPI_NUMA */ |
| |
| int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) |
| { |
| int err; |
| |
| if ((err = iosapic_init(phys_addr, gsi_base))) |
| return err; |
| |
| #ifdef CONFIG_ACPI_NUMA |
| acpi_map_iosapic(handle, 0, NULL, NULL); |
| #endif /* CONFIG_ACPI_NUMA */ |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(acpi_register_ioapic); |
| |
| int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) |
| { |
| return iosapic_remove(gsi_base); |
| } |
| |
| EXPORT_SYMBOL(acpi_unregister_ioapic); |
| |
| /* |
| * acpi_save_state_mem() - save kernel state |
| * |
| * TBD when when IA64 starts to support suspend... |
| */ |
| int acpi_save_state_mem(void) { return 0; } |
| |
| /* |
| * acpi_restore_state() |
| */ |
| void acpi_restore_state_mem(void) {} |
| |
| /* |
| * do_suspend_lowlevel() |
| */ |
| void do_suspend_lowlevel(void) {} |
| |
| #endif /* CONFIG_ACPI */ |