| /* |
| * Card-specific functions for the Siano SMS1xxx USB dongle |
| * |
| * Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation; |
| * |
| * Software distributed under the License is distributed on an "AS IS" |
| * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. |
| * |
| * See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "sms-cards.h" |
| |
| struct usb_device_id smsusb_id_table[] = { |
| #ifdef CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS |
| { USB_DEVICE(0x187f, 0x0010), |
| .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, |
| { USB_DEVICE(0x187f, 0x0100), |
| .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, |
| { USB_DEVICE(0x187f, 0x0200), |
| .driver_info = SMS1XXX_BOARD_SIANO_NOVA_A }, |
| { USB_DEVICE(0x187f, 0x0201), |
| .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, |
| { USB_DEVICE(0x187f, 0x0300), |
| .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, |
| #endif |
| { USB_DEVICE(0x2040, 0x1700), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, |
| { USB_DEVICE(0x2040, 0x1800), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A }, |
| { USB_DEVICE(0x2040, 0x1801), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, |
| { USB_DEVICE(0x2040, 0x2000), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2009), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 }, |
| { USB_DEVICE(0x2040, 0x200a), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2010), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2019), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x5500), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5510), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5520), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5530), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5580), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5590), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, smsusb_id_table); |
| |
| static struct sms_board sms_boards[] = { |
| [SMS_BOARD_UNKNOWN] = { |
| .name = "Unknown board", |
| }, |
| [SMS1XXX_BOARD_SIANO_STELLAR] = { |
| .name = "Siano Stellar Digital Receiver", |
| .type = SMS_STELLAR, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_SIANO_NOVA_A] = { |
| .name = "Siano Nova A Digital Receiver", |
| .type = SMS_NOVA_A0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_SIANO_NOVA_B] = { |
| .name = "Siano Nova B Digital Receiver", |
| .type = SMS_NOVA_B0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_SIANO_VEGA] = { |
| .name = "Siano Vega Digital Receiver", |
| .type = SMS_VEGA, |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = { |
| .name = "Hauppauge Catamount", |
| .type = SMS_STELLAR, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = { |
| .name = "Hauppauge Okemo-A", |
| .type = SMS_NOVA_A0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = { |
| .name = "Hauppauge Okemo-B", |
| .type = SMS_NOVA_B0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw", |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { |
| .name = "Hauppauge WinTV MiniStick", |
| .type = SMS_NOVA_B0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", |
| .led_power = 26, |
| .led_lo = 27, |
| .led_hi = 28, |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = { |
| .name = "Hauppauge WinTV MiniCard", |
| .type = SMS_NOVA_B0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", |
| .lna_ctrl = 29, |
| }, |
| [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = { |
| .name = "Hauppauge WinTV MiniCard", |
| .type = SMS_NOVA_B0, |
| .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", |
| .lna_ctrl = -1, |
| }, |
| }; |
| |
| struct sms_board *sms_get_board(int id) |
| { |
| BUG_ON(id >= ARRAY_SIZE(sms_boards)); |
| |
| return &sms_boards[id]; |
| } |
| |
| static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable) |
| { |
| int lvl, ret; |
| u32 gpio; |
| struct smscore_gpio_config gpioconfig = { |
| .direction = SMS_GPIO_DIRECTION_OUTPUT, |
| .pullupdown = SMS_GPIO_PULLUPDOWN_NONE, |
| .inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL, |
| .outputslewrate = SMS_GPIO_OUTPUTSLEWRATE_FAST, |
| .outputdriving = SMS_GPIO_OUTPUTDRIVING_4mA, |
| }; |
| |
| if (pin == 0) |
| return -EINVAL; |
| |
| if (pin < 0) { |
| /* inverted gpio */ |
| gpio = pin * -1; |
| lvl = enable ? 0 : 1; |
| } else { |
| gpio = pin; |
| lvl = enable ? 1 : 0; |
| } |
| |
| ret = smscore_configure_gpio(coredev, gpio, &gpioconfig); |
| if (ret < 0) |
| return ret; |
| |
| return smscore_set_gpio(coredev, gpio, lvl); |
| } |
| |
| int sms_board_setup(struct smscore_device_t *coredev) |
| { |
| int board_id = smscore_get_board_id(coredev); |
| struct sms_board *board = sms_get_board(board_id); |
| |
| switch (board_id) { |
| case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: |
| /* turn off all LEDs */ |
| sms_set_gpio(coredev, board->led_power, 0); |
| sms_set_gpio(coredev, board->led_hi, 0); |
| sms_set_gpio(coredev, board->led_lo, 0); |
| break; |
| case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: |
| case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: |
| /* turn off LNA */ |
| sms_set_gpio(coredev, board->lna_ctrl, 0); |
| break; |
| } |
| return 0; |
| } |
| |
| int sms_board_power(struct smscore_device_t *coredev, int onoff) |
| { |
| int board_id = smscore_get_board_id(coredev); |
| struct sms_board *board = sms_get_board(board_id); |
| |
| switch (board_id) { |
| case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: |
| /* power LED */ |
| sms_set_gpio(coredev, |
| board->led_power, onoff ? 1 : 0); |
| break; |
| case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: |
| case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: |
| /* LNA */ |
| sms_set_gpio(coredev, |
| board->lna_ctrl, onoff ? 1 : 0); |
| break; |
| } |
| return 0; |
| } |
| |
| int sms_board_led_feedback(struct smscore_device_t *coredev, int led) |
| { |
| int board_id = smscore_get_board_id(coredev); |
| struct sms_board *board = sms_get_board(board_id); |
| |
| /* dont touch GPIO if LEDs are already set */ |
| if (smscore_led_state(coredev, -1) == led) |
| return 0; |
| |
| switch (board_id) { |
| case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: |
| sms_set_gpio(coredev, |
| board->led_lo, (led & SMS_LED_LO) ? 1 : 0); |
| sms_set_gpio(coredev, |
| board->led_hi, (led & SMS_LED_HI) ? 1 : 0); |
| |
| smscore_led_state(coredev, led); |
| break; |
| } |
| return 0; |
| } |