| /* |
| * OMAP2 display controller support |
| * |
| * Copyright (C) 2005 Nokia Corporation |
| * Author: Imre Deak <imre.deak@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| |
| #include <plat/sram.h> |
| #include <plat/board.h> |
| |
| #include "omapfb.h" |
| #include "dispc.h" |
| |
| #define MODULE_NAME "dispc" |
| |
| #define DSS_BASE 0x48050000 |
| #define DSS_SYSCONFIG 0x0010 |
| |
| #define DISPC_BASE 0x48050400 |
| |
| /* DISPC common */ |
| #define DISPC_REVISION 0x0000 |
| #define DISPC_SYSCONFIG 0x0010 |
| #define DISPC_SYSSTATUS 0x0014 |
| #define DISPC_IRQSTATUS 0x0018 |
| #define DISPC_IRQENABLE 0x001C |
| #define DISPC_CONTROL 0x0040 |
| #define DISPC_CONFIG 0x0044 |
| #define DISPC_CAPABLE 0x0048 |
| #define DISPC_DEFAULT_COLOR0 0x004C |
| #define DISPC_DEFAULT_COLOR1 0x0050 |
| #define DISPC_TRANS_COLOR0 0x0054 |
| #define DISPC_TRANS_COLOR1 0x0058 |
| #define DISPC_LINE_STATUS 0x005C |
| #define DISPC_LINE_NUMBER 0x0060 |
| #define DISPC_TIMING_H 0x0064 |
| #define DISPC_TIMING_V 0x0068 |
| #define DISPC_POL_FREQ 0x006C |
| #define DISPC_DIVISOR 0x0070 |
| #define DISPC_SIZE_DIG 0x0078 |
| #define DISPC_SIZE_LCD 0x007C |
| |
| #define DISPC_DATA_CYCLE1 0x01D4 |
| #define DISPC_DATA_CYCLE2 0x01D8 |
| #define DISPC_DATA_CYCLE3 0x01DC |
| |
| /* DISPC GFX plane */ |
| #define DISPC_GFX_BA0 0x0080 |
| #define DISPC_GFX_BA1 0x0084 |
| #define DISPC_GFX_POSITION 0x0088 |
| #define DISPC_GFX_SIZE 0x008C |
| #define DISPC_GFX_ATTRIBUTES 0x00A0 |
| #define DISPC_GFX_FIFO_THRESHOLD 0x00A4 |
| #define DISPC_GFX_FIFO_SIZE_STATUS 0x00A8 |
| #define DISPC_GFX_ROW_INC 0x00AC |
| #define DISPC_GFX_PIXEL_INC 0x00B0 |
| #define DISPC_GFX_WINDOW_SKIP 0x00B4 |
| #define DISPC_GFX_TABLE_BA 0x00B8 |
| |
| /* DISPC Video plane 1/2 */ |
| #define DISPC_VID1_BASE 0x00BC |
| #define DISPC_VID2_BASE 0x014C |
| |
| /* Offsets into DISPC_VID1/2_BASE */ |
| #define DISPC_VID_BA0 0x0000 |
| #define DISPC_VID_BA1 0x0004 |
| #define DISPC_VID_POSITION 0x0008 |
| #define DISPC_VID_SIZE 0x000C |
| #define DISPC_VID_ATTRIBUTES 0x0010 |
| #define DISPC_VID_FIFO_THRESHOLD 0x0014 |
| #define DISPC_VID_FIFO_SIZE_STATUS 0x0018 |
| #define DISPC_VID_ROW_INC 0x001C |
| #define DISPC_VID_PIXEL_INC 0x0020 |
| #define DISPC_VID_FIR 0x0024 |
| #define DISPC_VID_PICTURE_SIZE 0x0028 |
| #define DISPC_VID_ACCU0 0x002C |
| #define DISPC_VID_ACCU1 0x0030 |
| |
| /* 8 elements in 8 byte increments */ |
| #define DISPC_VID_FIR_COEF_H0 0x0034 |
| /* 8 elements in 8 byte increments */ |
| #define DISPC_VID_FIR_COEF_HV0 0x0038 |
| /* 5 elements in 4 byte increments */ |
| #define DISPC_VID_CONV_COEF0 0x0074 |
| |
| #define DISPC_IRQ_FRAMEMASK 0x0001 |
| #define DISPC_IRQ_VSYNC 0x0002 |
| #define DISPC_IRQ_EVSYNC_EVEN 0x0004 |
| #define DISPC_IRQ_EVSYNC_ODD 0x0008 |
| #define DISPC_IRQ_ACBIAS_COUNT_STAT 0x0010 |
| #define DISPC_IRQ_PROG_LINE_NUM 0x0020 |
| #define DISPC_IRQ_GFX_FIFO_UNDERFLOW 0x0040 |
| #define DISPC_IRQ_GFX_END_WIN 0x0080 |
| #define DISPC_IRQ_PAL_GAMMA_MASK 0x0100 |
| #define DISPC_IRQ_OCP_ERR 0x0200 |
| #define DISPC_IRQ_VID1_FIFO_UNDERFLOW 0x0400 |
| #define DISPC_IRQ_VID1_END_WIN 0x0800 |
| #define DISPC_IRQ_VID2_FIFO_UNDERFLOW 0x1000 |
| #define DISPC_IRQ_VID2_END_WIN 0x2000 |
| #define DISPC_IRQ_SYNC_LOST 0x4000 |
| |
| #define DISPC_IRQ_MASK_ALL 0x7fff |
| |
| #define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_SYNC_LOST) |
| |
| #define RFBI_CONTROL 0x48050040 |
| |
| #define MAX_PALETTE_SIZE (256 * 16) |
| |
| #define FLD_MASK(pos, len) (((1 << len) - 1) << pos) |
| |
| #define MOD_REG_FLD(reg, mask, val) \ |
| dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val)); |
| |
| #define OMAP2_SRAM_START 0x40200000 |
| /* Maximum size, in reality this is smaller if SRAM is partially locked. */ |
| #define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ |
| |
| /* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */ |
| #define DISPC_MEMTYPE_NUM 2 |
| |
| #define RESMAP_SIZE(_page_cnt) \ |
| ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8) |
| #define RESMAP_PTR(_res_map, _page_nr) \ |
| (((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8)) |
| #define RESMAP_MASK(_page_nr) \ |
| (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1))) |
| |
| struct resmap { |
| unsigned long start; |
| unsigned page_cnt; |
| unsigned long *map; |
| }; |
| |
| #define MAX_IRQ_HANDLERS 4 |
| |
| static struct { |
| void __iomem *base; |
| |
| struct omapfb_mem_desc mem_desc; |
| struct resmap *res_map[DISPC_MEMTYPE_NUM]; |
| atomic_t map_count[OMAPFB_PLANE_NUM]; |
| |
| dma_addr_t palette_paddr; |
| void *palette_vaddr; |
| |
| int ext_mode; |
| |
| struct { |
| u32 irq_mask; |
| void (*callback)(void *); |
| void *data; |
| } irq_handlers[MAX_IRQ_HANDLERS]; |
| struct completion frame_done; |
| |
| int fir_hinc[OMAPFB_PLANE_NUM]; |
| int fir_vinc[OMAPFB_PLANE_NUM]; |
| |
| struct clk *dss_ick, *dss1_fck; |
| struct clk *dss_54m_fck; |
| |
| enum omapfb_update_mode update_mode; |
| struct omapfb_device *fbdev; |
| |
| struct omapfb_color_key color_key; |
| } dispc; |
| |
| static void enable_lcd_clocks(int enable); |
| |
| static void inline dispc_write_reg(int idx, u32 val) |
| { |
| __raw_writel(val, dispc.base + idx); |
| } |
| |
| static u32 inline dispc_read_reg(int idx) |
| { |
| u32 l = __raw_readl(dispc.base + idx); |
| return l; |
| } |
| |
| /* Select RFBI or bypass mode */ |
| static void enable_rfbi_mode(int enable) |
| { |
| void __iomem *rfbi_control; |
| u32 l; |
| |
| l = dispc_read_reg(DISPC_CONTROL); |
| /* Enable RFBI, GPIO0/1 */ |
| l &= ~((1 << 11) | (1 << 15) | (1 << 16)); |
| l |= enable ? (1 << 11) : 0; |
| /* RFBI En: GPIO0/1=10 RFBI Dis: GPIO0/1=11 */ |
| l |= 1 << 15; |
| l |= enable ? 0 : (1 << 16); |
| dispc_write_reg(DISPC_CONTROL, l); |
| |
| /* Set bypass mode in RFBI module */ |
| rfbi_control = ioremap(RFBI_CONTROL, SZ_1K); |
| if (!rfbi_control) { |
| pr_err("Unable to ioremap rfbi_control\n"); |
| return; |
| } |
| l = __raw_readl(rfbi_control); |
| l |= enable ? 0 : (1 << 1); |
| __raw_writel(l, rfbi_control); |
| iounmap(rfbi_control); |
| } |
| |
| static void set_lcd_data_lines(int data_lines) |
| { |
| u32 l; |
| int code = 0; |
| |
| switch (data_lines) { |
| case 12: |
| code = 0; |
| break; |
| case 16: |
| code = 1; |
| break; |
| case 18: |
| code = 2; |
| break; |
| case 24: |
| code = 3; |
| break; |
| default: |
| BUG(); |
| } |
| |
| l = dispc_read_reg(DISPC_CONTROL); |
| l &= ~(0x03 << 8); |
| l |= code << 8; |
| dispc_write_reg(DISPC_CONTROL, l); |
| } |
| |
| static void set_load_mode(int mode) |
| { |
| BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY | |
| DISPC_LOAD_CLUT_ONCE_FRAME)); |
| MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1); |
| } |
| |
| void omap_dispc_set_lcd_size(int x, int y) |
| { |
| BUG_ON((x > (1 << 11)) || (y > (1 << 11))); |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| ((y - 1) << 16) | (x - 1)); |
| enable_lcd_clocks(0); |
| } |
| EXPORT_SYMBOL(omap_dispc_set_lcd_size); |
| |
| void omap_dispc_set_digit_size(int x, int y) |
| { |
| BUG_ON((x > (1 << 11)) || (y > (1 << 11))); |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| ((y - 1) << 16) | (x - 1)); |
| enable_lcd_clocks(0); |
| } |
| EXPORT_SYMBOL(omap_dispc_set_digit_size); |
| |
| static void setup_plane_fifo(int plane, int ext_mode) |
| { |
| const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, |
| DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD, |
| DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD }; |
| const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, |
| DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS, |
| DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS }; |
| int low, high; |
| u32 l; |
| |
| BUG_ON(plane > 2); |
| |
| l = dispc_read_reg(fsz_reg[plane]); |
| l &= FLD_MASK(0, 11); |
| if (ext_mode) { |
| low = l * 3 / 4; |
| high = l; |
| } else { |
| low = l / 4; |
| high = l * 3 / 4; |
| } |
| MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12), |
| (high << 16) | low); |
| } |
| |
| void omap_dispc_enable_lcd_out(int enable) |
| { |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0); |
| enable_lcd_clocks(0); |
| } |
| EXPORT_SYMBOL(omap_dispc_enable_lcd_out); |
| |
| void omap_dispc_enable_digit_out(int enable) |
| { |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0); |
| enable_lcd_clocks(0); |
| } |
| EXPORT_SYMBOL(omap_dispc_enable_digit_out); |
| |
| static inline int _setup_plane(int plane, int channel_out, |
| u32 paddr, int screen_width, |
| int pos_x, int pos_y, int width, int height, |
| int color_mode) |
| { |
| const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES, |
| DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0, |
| DISPC_VID2_BASE + DISPC_VID_BA0 }; |
| const u32 ps_reg[] = { DISPC_GFX_POSITION, |
| DISPC_VID1_BASE + DISPC_VID_POSITION, |
| DISPC_VID2_BASE + DISPC_VID_POSITION }; |
| const u32 sz_reg[] = { DISPC_GFX_SIZE, |
| DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE, |
| DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE }; |
| const u32 ri_reg[] = { DISPC_GFX_ROW_INC, |
| DISPC_VID1_BASE + DISPC_VID_ROW_INC, |
| DISPC_VID2_BASE + DISPC_VID_ROW_INC }; |
| const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE, |
| DISPC_VID2_BASE + DISPC_VID_SIZE }; |
| |
| int chout_shift, burst_shift; |
| int chout_val; |
| int color_code; |
| int bpp; |
| int cconv_en; |
| int set_vsize; |
| u32 l; |
| |
| #ifdef VERBOSE |
| dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d" |
| " pos_x %d pos_y %d width %d height %d color_mode %d\n", |
| plane, channel_out, paddr, screen_width, pos_x, pos_y, |
| width, height, color_mode); |
| #endif |
| |
| set_vsize = 0; |
| switch (plane) { |
| case OMAPFB_PLANE_GFX: |
| burst_shift = 6; |
| chout_shift = 8; |
| break; |
| case OMAPFB_PLANE_VID1: |
| case OMAPFB_PLANE_VID2: |
| burst_shift = 14; |
| chout_shift = 16; |
| set_vsize = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (channel_out) { |
| case OMAPFB_CHANNEL_OUT_LCD: |
| chout_val = 0; |
| break; |
| case OMAPFB_CHANNEL_OUT_DIGIT: |
| chout_val = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| cconv_en = 0; |
| switch (color_mode) { |
| case OMAPFB_COLOR_RGB565: |
| color_code = DISPC_RGB_16_BPP; |
| bpp = 16; |
| break; |
| case OMAPFB_COLOR_YUV422: |
| if (plane == 0) |
| return -EINVAL; |
| color_code = DISPC_UYVY_422; |
| cconv_en = 1; |
| bpp = 16; |
| break; |
| case OMAPFB_COLOR_YUY422: |
| if (plane == 0) |
| return -EINVAL; |
| color_code = DISPC_YUV2_422; |
| cconv_en = 1; |
| bpp = 16; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| l = dispc_read_reg(at_reg[plane]); |
| |
| l &= ~(0x0f << 1); |
| l |= color_code << 1; |
| l &= ~(1 << 9); |
| l |= cconv_en << 9; |
| |
| l &= ~(0x03 << burst_shift); |
| l |= DISPC_BURST_8x32 << burst_shift; |
| |
| l &= ~(1 << chout_shift); |
| l |= chout_val << chout_shift; |
| |
| dispc_write_reg(at_reg[plane], l); |
| |
| dispc_write_reg(ba_reg[plane], paddr); |
| MOD_REG_FLD(ps_reg[plane], |
| FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x); |
| |
| MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| ((height - 1) << 16) | (width - 1)); |
| |
| if (set_vsize) { |
| /* Set video size if set_scale hasn't set it */ |
| if (!dispc.fir_vinc[plane]) |
| MOD_REG_FLD(vs_reg[plane], |
| FLD_MASK(16, 11), (height - 1) << 16); |
| if (!dispc.fir_hinc[plane]) |
| MOD_REG_FLD(vs_reg[plane], |
| FLD_MASK(0, 11), width - 1); |
| } |
| |
| dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1); |
| |
| return height * screen_width * bpp / 8; |
| } |
| |
| static int omap_dispc_setup_plane(int plane, int channel_out, |
| unsigned long offset, |
| int screen_width, |
| int pos_x, int pos_y, int width, int height, |
| int color_mode) |
| { |
| u32 paddr; |
| int r; |
| |
| if ((unsigned)plane > dispc.mem_desc.region_cnt) |
| return -EINVAL; |
| paddr = dispc.mem_desc.region[plane].paddr + offset; |
| enable_lcd_clocks(1); |
| r = _setup_plane(plane, channel_out, paddr, |
| screen_width, |
| pos_x, pos_y, width, height, color_mode); |
| enable_lcd_clocks(0); |
| return r; |
| } |
| |
| static void write_firh_reg(int plane, int reg, u32 value) |
| { |
| u32 base; |
| |
| if (plane == 1) |
| base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0; |
| else |
| base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0; |
| dispc_write_reg(base + reg * 8, value); |
| } |
| |
| static void write_firhv_reg(int plane, int reg, u32 value) |
| { |
| u32 base; |
| |
| if (plane == 1) |
| base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0; |
| else |
| base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0; |
| dispc_write_reg(base + reg * 8, value); |
| } |
| |
| static void set_upsampling_coef_table(int plane) |
| { |
| const u32 coef[][2] = { |
| { 0x00800000, 0x00800000 }, |
| { 0x0D7CF800, 0x037B02FF }, |
| { 0x1E70F5FF, 0x0C6F05FE }, |
| { 0x335FF5FE, 0x205907FB }, |
| { 0xF74949F7, 0x00404000 }, |
| { 0xF55F33FB, 0x075920FE }, |
| { 0xF5701EFE, 0x056F0CFF }, |
| { 0xF87C0DFF, 0x027B0300 }, |
| }; |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| write_firh_reg(plane, i, coef[i][0]); |
| write_firhv_reg(plane, i, coef[i][1]); |
| } |
| } |
| |
| static int omap_dispc_set_scale(int plane, |
| int orig_width, int orig_height, |
| int out_width, int out_height) |
| { |
| const u32 at_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE, |
| DISPC_VID2_BASE + DISPC_VID_SIZE }; |
| const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR, |
| DISPC_VID2_BASE + DISPC_VID_FIR }; |
| |
| u32 l; |
| int fir_hinc; |
| int fir_vinc; |
| |
| if ((unsigned)plane > OMAPFB_PLANE_NUM) |
| return -ENODEV; |
| |
| if (plane == OMAPFB_PLANE_GFX && |
| (out_width != orig_width || out_height != orig_height)) |
| return -EINVAL; |
| |
| enable_lcd_clocks(1); |
| if (orig_width < out_width) { |
| /* |
| * Upsampling. |
| * Currently you can only scale both dimensions in one way. |
| */ |
| if (orig_height > out_height || |
| orig_width * 8 < out_width || |
| orig_height * 8 < out_height) { |
| enable_lcd_clocks(0); |
| return -EINVAL; |
| } |
| set_upsampling_coef_table(plane); |
| } else if (orig_width > out_width) { |
| /* Downsampling not yet supported |
| */ |
| |
| enable_lcd_clocks(0); |
| return -EINVAL; |
| } |
| if (!orig_width || orig_width == out_width) |
| fir_hinc = 0; |
| else |
| fir_hinc = 1024 * orig_width / out_width; |
| if (!orig_height || orig_height == out_height) |
| fir_vinc = 0; |
| else |
| fir_vinc = 1024 * orig_height / out_height; |
| dispc.fir_hinc[plane] = fir_hinc; |
| dispc.fir_vinc[plane] = fir_vinc; |
| |
| MOD_REG_FLD(fir_reg[plane], |
| FLD_MASK(16, 12) | FLD_MASK(0, 12), |
| ((fir_vinc & 4095) << 16) | |
| (fir_hinc & 4095)); |
| |
| dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d " |
| "orig_height %d fir_hinc %d fir_vinc %d\n", |
| out_width, out_height, orig_width, orig_height, |
| fir_hinc, fir_vinc); |
| |
| MOD_REG_FLD(vs_reg[plane], |
| FLD_MASK(16, 11) | FLD_MASK(0, 11), |
| ((out_height - 1) << 16) | (out_width - 1)); |
| |
| l = dispc_read_reg(at_reg[plane]); |
| l &= ~(0x03 << 5); |
| l |= fir_hinc ? (1 << 5) : 0; |
| l |= fir_vinc ? (1 << 6) : 0; |
| dispc_write_reg(at_reg[plane], l); |
| |
| enable_lcd_clocks(0); |
| return 0; |
| } |
| |
| static int omap_dispc_enable_plane(int plane, int enable) |
| { |
| const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES, |
| DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES, |
| DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES }; |
| if ((unsigned int)plane > dispc.mem_desc.region_cnt) |
| return -EINVAL; |
| |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0); |
| enable_lcd_clocks(0); |
| |
| return 0; |
| } |
| |
| static int omap_dispc_set_color_key(struct omapfb_color_key *ck) |
| { |
| u32 df_reg, tr_reg; |
| int shift, val; |
| |
| switch (ck->channel_out) { |
| case OMAPFB_CHANNEL_OUT_LCD: |
| df_reg = DISPC_DEFAULT_COLOR0; |
| tr_reg = DISPC_TRANS_COLOR0; |
| shift = 10; |
| break; |
| case OMAPFB_CHANNEL_OUT_DIGIT: |
| df_reg = DISPC_DEFAULT_COLOR1; |
| tr_reg = DISPC_TRANS_COLOR1; |
| shift = 12; |
| break; |
| default: |
| return -EINVAL; |
| } |
| switch (ck->key_type) { |
| case OMAPFB_COLOR_KEY_DISABLED: |
| val = 0; |
| break; |
| case OMAPFB_COLOR_KEY_GFX_DST: |
| val = 1; |
| break; |
| case OMAPFB_COLOR_KEY_VID_SRC: |
| val = 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift); |
| |
| if (val != 0) |
| dispc_write_reg(tr_reg, ck->trans_key); |
| dispc_write_reg(df_reg, ck->background); |
| enable_lcd_clocks(0); |
| |
| dispc.color_key = *ck; |
| |
| return 0; |
| } |
| |
| static int omap_dispc_get_color_key(struct omapfb_color_key *ck) |
| { |
| *ck = dispc.color_key; |
| return 0; |
| } |
| |
| static void load_palette(void) |
| { |
| } |
| |
| static int omap_dispc_set_update_mode(enum omapfb_update_mode mode) |
| { |
| int r = 0; |
| |
| if (mode != dispc.update_mode) { |
| switch (mode) { |
| case OMAPFB_AUTO_UPDATE: |
| case OMAPFB_MANUAL_UPDATE: |
| enable_lcd_clocks(1); |
| omap_dispc_enable_lcd_out(1); |
| dispc.update_mode = mode; |
| break; |
| case OMAPFB_UPDATE_DISABLED: |
| init_completion(&dispc.frame_done); |
| omap_dispc_enable_lcd_out(0); |
| if (!wait_for_completion_timeout(&dispc.frame_done, |
| msecs_to_jiffies(500))) { |
| dev_err(dispc.fbdev->dev, |
| "timeout waiting for FRAME DONE\n"); |
| } |
| dispc.update_mode = mode; |
| enable_lcd_clocks(0); |
| break; |
| default: |
| r = -EINVAL; |
| } |
| } |
| |
| return r; |
| } |
| |
| static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps) |
| { |
| caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM; |
| if (plane > 0) |
| caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE; |
| caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) | |
| (1 << OMAPFB_COLOR_YUV422) | |
| (1 << OMAPFB_COLOR_YUY422); |
| if (plane == 0) |
| caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) | |
| (1 << OMAPFB_COLOR_CLUT_4BPP) | |
| (1 << OMAPFB_COLOR_CLUT_2BPP) | |
| (1 << OMAPFB_COLOR_CLUT_1BPP) | |
| (1 << OMAPFB_COLOR_RGB444); |
| } |
| |
| static enum omapfb_update_mode omap_dispc_get_update_mode(void) |
| { |
| return dispc.update_mode; |
| } |
| |
| static void setup_color_conv_coef(void) |
| { |
| u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11); |
| int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0; |
| int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0; |
| int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES; |
| int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES; |
| const struct color_conv_coef { |
| int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; |
| int full_range; |
| } ctbl_bt601_5 = { |
| 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, |
| }; |
| const struct color_conv_coef *ct; |
| #define CVAL(x, y) (((x & 2047) << 16) | (y & 2047)) |
| |
| ct = &ctbl_bt601_5; |
| |
| MOD_REG_FLD(cf1_reg, mask, CVAL(ct->rcr, ct->ry)); |
| MOD_REG_FLD(cf1_reg + 4, mask, CVAL(ct->gy, ct->rcb)); |
| MOD_REG_FLD(cf1_reg + 8, mask, CVAL(ct->gcb, ct->gcr)); |
| MOD_REG_FLD(cf1_reg + 12, mask, CVAL(ct->bcr, ct->by)); |
| MOD_REG_FLD(cf1_reg + 16, mask, CVAL(0, ct->bcb)); |
| |
| MOD_REG_FLD(cf2_reg, mask, CVAL(ct->rcr, ct->ry)); |
| MOD_REG_FLD(cf2_reg + 4, mask, CVAL(ct->gy, ct->rcb)); |
| MOD_REG_FLD(cf2_reg + 8, mask, CVAL(ct->gcb, ct->gcr)); |
| MOD_REG_FLD(cf2_reg + 12, mask, CVAL(ct->bcr, ct->by)); |
| MOD_REG_FLD(cf2_reg + 16, mask, CVAL(0, ct->bcb)); |
| #undef CVAL |
| |
| MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range); |
| MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range); |
| } |
| |
| static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div) |
| { |
| unsigned long fck, lck; |
| |
| *lck_div = 1; |
| pck = max(1, pck); |
| fck = clk_get_rate(dispc.dss1_fck); |
| lck = fck; |
| *pck_div = (lck + pck - 1) / pck; |
| if (is_tft) |
| *pck_div = max(2, *pck_div); |
| else |
| *pck_div = max(3, *pck_div); |
| if (*pck_div > 255) { |
| *pck_div = 255; |
| lck = pck * *pck_div; |
| *lck_div = fck / lck; |
| BUG_ON(*lck_div < 1); |
| if (*lck_div > 255) { |
| *lck_div = 255; |
| dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n", |
| pck / 1000); |
| } |
| } |
| } |
| |
| static void set_lcd_tft_mode(int enable) |
| { |
| u32 mask; |
| |
| mask = 1 << 3; |
| MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0); |
| } |
| |
| static void set_lcd_timings(void) |
| { |
| u32 l; |
| int lck_div, pck_div; |
| struct lcd_panel *panel = dispc.fbdev->panel; |
| int is_tft = panel->config & OMAP_LCDC_PANEL_TFT; |
| unsigned long fck; |
| |
| l = dispc_read_reg(DISPC_TIMING_H); |
| l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8)); |
| l |= ( max(1, (min(64, panel->hsw))) - 1 ) << 0; |
| l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8; |
| l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20; |
| dispc_write_reg(DISPC_TIMING_H, l); |
| |
| l = dispc_read_reg(DISPC_TIMING_V); |
| l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8)); |
| l |= ( max(1, (min(64, panel->vsw))) - 1 ) << 0; |
| l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8; |
| l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20; |
| dispc_write_reg(DISPC_TIMING_V, l); |
| |
| l = dispc_read_reg(DISPC_POL_FREQ); |
| l &= ~FLD_MASK(12, 6); |
| l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12; |
| l |= panel->acb & 0xff; |
| dispc_write_reg(DISPC_POL_FREQ, l); |
| |
| calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div); |
| |
| l = dispc_read_reg(DISPC_DIVISOR); |
| l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8)); |
| l |= (lck_div << 16) | (pck_div << 0); |
| dispc_write_reg(DISPC_DIVISOR, l); |
| |
| /* update panel info with the exact clock */ |
| fck = clk_get_rate(dispc.dss1_fck); |
| panel->pixel_clock = fck / lck_div / pck_div / 1000; |
| } |
| |
| static void recalc_irq_mask(void) |
| { |
| int i; |
| unsigned long irq_mask = DISPC_IRQ_MASK_ERROR; |
| |
| for (i = 0; i < MAX_IRQ_HANDLERS; i++) { |
| if (!dispc.irq_handlers[i].callback) |
| continue; |
| |
| irq_mask |= dispc.irq_handlers[i].irq_mask; |
| } |
| |
| enable_lcd_clocks(1); |
| MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask); |
| enable_lcd_clocks(0); |
| } |
| |
| int omap_dispc_request_irq(unsigned long irq_mask, void (*callback)(void *data), |
| void *data) |
| { |
| int i; |
| |
| BUG_ON(callback == NULL); |
| |
| for (i = 0; i < MAX_IRQ_HANDLERS; i++) { |
| if (dispc.irq_handlers[i].callback) |
| continue; |
| |
| dispc.irq_handlers[i].irq_mask = irq_mask; |
| dispc.irq_handlers[i].callback = callback; |
| dispc.irq_handlers[i].data = data; |
| recalc_irq_mask(); |
| |
| return 0; |
| } |
| |
| return -EBUSY; |
| } |
| EXPORT_SYMBOL(omap_dispc_request_irq); |
| |
| void omap_dispc_free_irq(unsigned long irq_mask, void (*callback)(void *data), |
| void *data) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IRQ_HANDLERS; i++) { |
| if (dispc.irq_handlers[i].callback == callback && |
| dispc.irq_handlers[i].data == data) { |
| dispc.irq_handlers[i].irq_mask = 0; |
| dispc.irq_handlers[i].callback = NULL; |
| dispc.irq_handlers[i].data = NULL; |
| recalc_irq_mask(); |
| return; |
| } |
| } |
| |
| BUG(); |
| } |
| EXPORT_SYMBOL(omap_dispc_free_irq); |
| |
| static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) |
| { |
| u32 stat; |
| int i = 0; |
| |
| enable_lcd_clocks(1); |
| |
| stat = dispc_read_reg(DISPC_IRQSTATUS); |
| if (stat & DISPC_IRQ_FRAMEMASK) |
| complete(&dispc.frame_done); |
| |
| if (stat & DISPC_IRQ_MASK_ERROR) { |
| if (printk_ratelimit()) { |
| dev_err(dispc.fbdev->dev, "irq error status %04x\n", |
| stat & 0x7fff); |
| } |
| } |
| |
| for (i = 0; i < MAX_IRQ_HANDLERS; i++) { |
| if (unlikely(dispc.irq_handlers[i].callback && |
| (stat & dispc.irq_handlers[i].irq_mask))) |
| dispc.irq_handlers[i].callback( |
| dispc.irq_handlers[i].data); |
| } |
| |
| dispc_write_reg(DISPC_IRQSTATUS, stat); |
| |
| enable_lcd_clocks(0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int get_dss_clocks(void) |
| { |
| dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick"); |
| if (IS_ERR(dispc.dss_ick)) { |
| dev_err(dispc.fbdev->dev, "can't get ick\n"); |
| return PTR_ERR(dispc.dss_ick); |
| } |
| |
| dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck"); |
| if (IS_ERR(dispc.dss1_fck)) { |
| dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); |
| clk_put(dispc.dss_ick); |
| return PTR_ERR(dispc.dss1_fck); |
| } |
| |
| dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_fck"); |
| if (IS_ERR(dispc.dss_54m_fck)) { |
| dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); |
| clk_put(dispc.dss_ick); |
| clk_put(dispc.dss1_fck); |
| return PTR_ERR(dispc.dss_54m_fck); |
| } |
| |
| return 0; |
| } |
| |
| static void put_dss_clocks(void) |
| { |
| clk_put(dispc.dss_54m_fck); |
| clk_put(dispc.dss1_fck); |
| clk_put(dispc.dss_ick); |
| } |
| |
| static void enable_lcd_clocks(int enable) |
| { |
| if (enable) { |
| clk_enable(dispc.dss_ick); |
| clk_enable(dispc.dss1_fck); |
| } else { |
| clk_disable(dispc.dss1_fck); |
| clk_disable(dispc.dss_ick); |
| } |
| } |
| |
| static void enable_digit_clocks(int enable) |
| { |
| if (enable) |
| clk_enable(dispc.dss_54m_fck); |
| else |
| clk_disable(dispc.dss_54m_fck); |
| } |
| |
| static void omap_dispc_suspend(void) |
| { |
| if (dispc.update_mode == OMAPFB_AUTO_UPDATE) { |
| init_completion(&dispc.frame_done); |
| omap_dispc_enable_lcd_out(0); |
| if (!wait_for_completion_timeout(&dispc.frame_done, |
| msecs_to_jiffies(500))) { |
| dev_err(dispc.fbdev->dev, |
| "timeout waiting for FRAME DONE\n"); |
| } |
| enable_lcd_clocks(0); |
| } |
| } |
| |
| static void omap_dispc_resume(void) |
| { |
| if (dispc.update_mode == OMAPFB_AUTO_UPDATE) { |
| enable_lcd_clocks(1); |
| if (!dispc.ext_mode) { |
| set_lcd_timings(); |
| load_palette(); |
| } |
| omap_dispc_enable_lcd_out(1); |
| } |
| } |
| |
| |
| static int omap_dispc_update_window(struct fb_info *fbi, |
| struct omapfb_update_window *win, |
| void (*complete_callback)(void *arg), |
| void *complete_callback_data) |
| { |
| return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0; |
| } |
| |
| static int mmap_kern(struct omapfb_mem_region *region) |
| { |
| struct vm_struct *kvma; |
| struct vm_area_struct vma; |
| pgprot_t pgprot; |
| unsigned long vaddr; |
| |
| kvma = get_vm_area(region->size, VM_IOREMAP); |
| if (kvma == NULL) { |
| dev_err(dispc.fbdev->dev, "can't get kernel vm area\n"); |
| return -ENOMEM; |
| } |
| vma.vm_mm = &init_mm; |
| |
| vaddr = (unsigned long)kvma->addr; |
| |
| pgprot = pgprot_writecombine(pgprot_kernel); |
| vma.vm_start = vaddr; |
| vma.vm_end = vaddr + region->size; |
| if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT, |
| region->size, pgprot) < 0) { |
| dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n"); |
| return -EAGAIN; |
| } |
| region->vaddr = (void *)vaddr; |
| |
| return 0; |
| } |
| |
| static void mmap_user_open(struct vm_area_struct *vma) |
| { |
| int plane = (int)vma->vm_private_data; |
| |
| atomic_inc(&dispc.map_count[plane]); |
| } |
| |
| static void mmap_user_close(struct vm_area_struct *vma) |
| { |
| int plane = (int)vma->vm_private_data; |
| |
| atomic_dec(&dispc.map_count[plane]); |
| } |
| |
| static const struct vm_operations_struct mmap_user_ops = { |
| .open = mmap_user_open, |
| .close = mmap_user_close, |
| }; |
| |
| static int omap_dispc_mmap_user(struct fb_info *info, |
| struct vm_area_struct *vma) |
| { |
| struct omapfb_plane_struct *plane = info->par; |
| unsigned long off; |
| unsigned long start; |
| u32 len; |
| |
| if (vma->vm_end - vma->vm_start == 0) |
| return 0; |
| if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) |
| return -EINVAL; |
| off = vma->vm_pgoff << PAGE_SHIFT; |
| |
| start = info->fix.smem_start; |
| len = info->fix.smem_len; |
| if (off >= len) |
| return -EINVAL; |
| if ((vma->vm_end - vma->vm_start + off) > len) |
| return -EINVAL; |
| off += start; |
| vma->vm_pgoff = off >> PAGE_SHIFT; |
| vma->vm_flags |= VM_IO | VM_RESERVED; |
| vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); |
| vma->vm_ops = &mmap_user_ops; |
| vma->vm_private_data = (void *)plane->idx; |
| if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, |
| vma->vm_end - vma->vm_start, vma->vm_page_prot)) |
| return -EAGAIN; |
| /* vm_ops.open won't be called for mmap itself. */ |
| atomic_inc(&dispc.map_count[plane->idx]); |
| return 0; |
| } |
| |
| static void unmap_kern(struct omapfb_mem_region *region) |
| { |
| vunmap(region->vaddr); |
| } |
| |
| static int alloc_palette_ram(void) |
| { |
| dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev, |
| MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL); |
| if (dispc.palette_vaddr == NULL) { |
| dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void free_palette_ram(void) |
| { |
| dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE, |
| dispc.palette_vaddr, dispc.palette_paddr); |
| } |
| |
| static int alloc_fbmem(struct omapfb_mem_region *region) |
| { |
| region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev, |
| region->size, ®ion->paddr, GFP_KERNEL); |
| |
| if (region->vaddr == NULL) { |
| dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void free_fbmem(struct omapfb_mem_region *region) |
| { |
| dma_free_writecombine(dispc.fbdev->dev, region->size, |
| region->vaddr, region->paddr); |
| } |
| |
| static struct resmap *init_resmap(unsigned long start, size_t size) |
| { |
| unsigned page_cnt; |
| struct resmap *res_map; |
| |
| page_cnt = PAGE_ALIGN(size) / PAGE_SIZE; |
| res_map = |
| kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL); |
| if (res_map == NULL) |
| return NULL; |
| res_map->start = start; |
| res_map->page_cnt = page_cnt; |
| res_map->map = (unsigned long *)(res_map + 1); |
| return res_map; |
| } |
| |
| static void cleanup_resmap(struct resmap *res_map) |
| { |
| kfree(res_map); |
| } |
| |
| static inline int resmap_mem_type(unsigned long start) |
| { |
| if (start >= OMAP2_SRAM_START && |
| start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) |
| return OMAPFB_MEMTYPE_SRAM; |
| else |
| return OMAPFB_MEMTYPE_SDRAM; |
| } |
| |
| static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr) |
| { |
| return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0; |
| } |
| |
| static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr) |
| { |
| BUG_ON(resmap_page_reserved(res_map, page_nr)); |
| *RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr); |
| } |
| |
| static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr) |
| { |
| BUG_ON(!resmap_page_reserved(res_map, page_nr)); |
| *RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr); |
| } |
| |
| static void resmap_reserve_region(unsigned long start, size_t size) |
| { |
| |
| struct resmap *res_map; |
| unsigned start_page; |
| unsigned end_page; |
| int mtype; |
| unsigned i; |
| |
| mtype = resmap_mem_type(start); |
| res_map = dispc.res_map[mtype]; |
| dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n", |
| mtype, start, size); |
| start_page = (start - res_map->start) / PAGE_SIZE; |
| end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE; |
| for (i = start_page; i < end_page; i++) |
| resmap_reserve_page(res_map, i); |
| } |
| |
| static void resmap_free_region(unsigned long start, size_t size) |
| { |
| struct resmap *res_map; |
| unsigned start_page; |
| unsigned end_page; |
| unsigned i; |
| int mtype; |
| |
| mtype = resmap_mem_type(start); |
| res_map = dispc.res_map[mtype]; |
| dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n", |
| mtype, start, size); |
| start_page = (start - res_map->start) / PAGE_SIZE; |
| end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE; |
| for (i = start_page; i < end_page; i++) |
| resmap_free_page(res_map, i); |
| } |
| |
| static unsigned long resmap_alloc_region(int mtype, size_t size) |
| { |
| unsigned i; |
| unsigned total; |
| unsigned start_page; |
| unsigned long start; |
| struct resmap *res_map = dispc.res_map[mtype]; |
| |
| BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size); |
| |
| size = PAGE_ALIGN(size) / PAGE_SIZE; |
| start_page = 0; |
| total = 0; |
| for (i = 0; i < res_map->page_cnt; i++) { |
| if (resmap_page_reserved(res_map, i)) { |
| start_page = i + 1; |
| total = 0; |
| } else if (++total == size) |
| break; |
| } |
| if (total < size) |
| return 0; |
| |
| start = res_map->start + start_page * PAGE_SIZE; |
| resmap_reserve_region(start, size * PAGE_SIZE); |
| |
| return start; |
| } |
| |
| /* Note that this will only work for user mappings, we don't deal with |
| * kernel mappings here, so fbcon will keep using the old region. |
| */ |
| static int omap_dispc_setup_mem(int plane, size_t size, int mem_type, |
| unsigned long *paddr) |
| { |
| struct omapfb_mem_region *rg; |
| unsigned long new_addr = 0; |
| |
| if ((unsigned)plane > dispc.mem_desc.region_cnt) |
| return -EINVAL; |
| if (mem_type >= DISPC_MEMTYPE_NUM) |
| return -EINVAL; |
| if (dispc.res_map[mem_type] == NULL) |
| return -ENOMEM; |
| rg = &dispc.mem_desc.region[plane]; |
| if (size == rg->size && mem_type == rg->type) |
| return 0; |
| if (atomic_read(&dispc.map_count[plane])) |
| return -EBUSY; |
| if (rg->size != 0) |
| resmap_free_region(rg->paddr, rg->size); |
| if (size != 0) { |
| new_addr = resmap_alloc_region(mem_type, size); |
| if (!new_addr) { |
| /* Reallocate old region. */ |
| resmap_reserve_region(rg->paddr, rg->size); |
| return -ENOMEM; |
| } |
| } |
| rg->paddr = new_addr; |
| rg->size = size; |
| rg->type = mem_type; |
| |
| *paddr = new_addr; |
| |
| return 0; |
| } |
| |
| static int setup_fbmem(struct omapfb_mem_desc *req_md) |
| { |
| struct omapfb_mem_region *rg; |
| int i; |
| int r; |
| unsigned long mem_start[DISPC_MEMTYPE_NUM]; |
| unsigned long mem_end[DISPC_MEMTYPE_NUM]; |
| |
| if (!req_md->region_cnt) { |
| dev_err(dispc.fbdev->dev, "no memory regions defined\n"); |
| return -ENOENT; |
| } |
| |
| rg = &req_md->region[0]; |
| memset(mem_start, 0xff, sizeof(mem_start)); |
| memset(mem_end, 0, sizeof(mem_end)); |
| |
| for (i = 0; i < req_md->region_cnt; i++, rg++) { |
| int mtype; |
| if (rg->paddr) { |
| rg->alloc = 0; |
| if (rg->vaddr == NULL) { |
| rg->map = 1; |
| if ((r = mmap_kern(rg)) < 0) |
| return r; |
| } |
| } else { |
| if (rg->type != OMAPFB_MEMTYPE_SDRAM) { |
| dev_err(dispc.fbdev->dev, |
| "unsupported memory type\n"); |
| return -EINVAL; |
| } |
| rg->alloc = rg->map = 1; |
| if ((r = alloc_fbmem(rg)) < 0) |
| return r; |
| } |
| mtype = rg->type; |
| |
| if (rg->paddr < mem_start[mtype]) |
| mem_start[mtype] = rg->paddr; |
| if (rg->paddr + rg->size > mem_end[mtype]) |
| mem_end[mtype] = rg->paddr + rg->size; |
| } |
| |
| for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| unsigned long start; |
| size_t size; |
| if (mem_end[i] == 0) |
| continue; |
| start = mem_start[i]; |
| size = mem_end[i] - start; |
| dispc.res_map[i] = init_resmap(start, size); |
| r = -ENOMEM; |
| if (dispc.res_map[i] == NULL) |
| goto fail; |
| /* Initial state is that everything is reserved. This |
| * includes possible holes as well, which will never be |
| * freed. |
| */ |
| resmap_reserve_region(start, size); |
| } |
| |
| dispc.mem_desc = *req_md; |
| |
| return 0; |
| fail: |
| for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| if (dispc.res_map[i] != NULL) |
| cleanup_resmap(dispc.res_map[i]); |
| } |
| return r; |
| } |
| |
| static void cleanup_fbmem(void) |
| { |
| struct omapfb_mem_region *rg; |
| int i; |
| |
| for (i = 0; i < DISPC_MEMTYPE_NUM; i++) { |
| if (dispc.res_map[i] != NULL) |
| cleanup_resmap(dispc.res_map[i]); |
| } |
| rg = &dispc.mem_desc.region[0]; |
| for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) { |
| if (rg->alloc) |
| free_fbmem(rg); |
| else { |
| if (rg->map) |
| unmap_kern(rg); |
| } |
| } |
| } |
| |
| static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, |
| struct omapfb_mem_desc *req_vram) |
| { |
| int r; |
| u32 l; |
| struct lcd_panel *panel = fbdev->panel; |
| void __iomem *ram_fw_base; |
| int tmo = 10000; |
| int skip_init = 0; |
| int i; |
| |
| memset(&dispc, 0, sizeof(dispc)); |
| |
| dispc.base = ioremap(DISPC_BASE, SZ_1K); |
| if (!dispc.base) { |
| dev_err(fbdev->dev, "can't ioremap DISPC\n"); |
| return -ENOMEM; |
| } |
| |
| dispc.fbdev = fbdev; |
| dispc.ext_mode = ext_mode; |
| |
| init_completion(&dispc.frame_done); |
| |
| if ((r = get_dss_clocks()) < 0) |
| goto fail0; |
| |
| enable_lcd_clocks(1); |
| |
| #ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT |
| l = dispc_read_reg(DISPC_CONTROL); |
| /* LCD enabled ? */ |
| if (l & 1) { |
| pr_info("omapfb: skipping hardware initialization\n"); |
| skip_init = 1; |
| } |
| #endif |
| |
| if (!skip_init) { |
| /* Reset monitoring works only w/ the 54M clk */ |
| enable_digit_clocks(1); |
| |
| /* Soft reset */ |
| MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1); |
| |
| while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) { |
| if (!--tmo) { |
| dev_err(dispc.fbdev->dev, "soft reset failed\n"); |
| r = -ENODEV; |
| enable_digit_clocks(0); |
| goto fail1; |
| } |
| } |
| |
| enable_digit_clocks(0); |
| } |
| |
| /* Enable smart standby/idle, autoidle and wakeup */ |
| l = dispc_read_reg(DISPC_SYSCONFIG); |
| l &= ~((3 << 12) | (3 << 3)); |
| l |= (2 << 12) | (2 << 3) | (1 << 2) | (1 << 0); |
| dispc_write_reg(DISPC_SYSCONFIG, l); |
| omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG); |
| |
| /* Set functional clock autogating */ |
| l = dispc_read_reg(DISPC_CONFIG); |
| l |= 1 << 9; |
| dispc_write_reg(DISPC_CONFIG, l); |
| |
| l = dispc_read_reg(DISPC_IRQSTATUS); |
| dispc_write_reg(DISPC_IRQSTATUS, l); |
| |
| recalc_irq_mask(); |
| |
| if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler, |
| 0, MODULE_NAME, fbdev)) < 0) { |
| dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n"); |
| goto fail1; |
| } |
| |
| /* L3 firewall setting: enable access to OCM RAM */ |
| ram_fw_base = ioremap(0x68005000, SZ_1K); |
| if (!ram_fw_base) { |
| dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n"); |
| goto fail1; |
| } |
| __raw_writel(0x402000b0, ram_fw_base + 0xa0); |
| iounmap(ram_fw_base); |
| |
| if ((r = alloc_palette_ram()) < 0) |
| goto fail2; |
| |
| if ((r = setup_fbmem(req_vram)) < 0) |
| goto fail3; |
| |
| if (!skip_init) { |
| for (i = 0; i < dispc.mem_desc.region_cnt; i++) { |
| memset(dispc.mem_desc.region[i].vaddr, 0, |
| dispc.mem_desc.region[i].size); |
| } |
| |
| /* Set logic clock to fck, pixel clock to fck/2 for now */ |
| MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16); |
| MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0); |
| |
| setup_plane_fifo(0, ext_mode); |
| setup_plane_fifo(1, ext_mode); |
| setup_plane_fifo(2, ext_mode); |
| |
| setup_color_conv_coef(); |
| |
| set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT); |
| set_load_mode(DISPC_LOAD_FRAME_ONLY); |
| |
| if (!ext_mode) { |
| set_lcd_data_lines(panel->data_lines); |
| omap_dispc_set_lcd_size(panel->x_res, panel->y_res); |
| set_lcd_timings(); |
| } else |
| set_lcd_data_lines(panel->bpp); |
| enable_rfbi_mode(ext_mode); |
| } |
| |
| l = dispc_read_reg(DISPC_REVISION); |
| pr_info("omapfb: DISPC version %d.%d initialized\n", |
| l >> 4 & 0x0f, l & 0x0f); |
| enable_lcd_clocks(0); |
| |
| return 0; |
| fail3: |
| free_palette_ram(); |
| fail2: |
| free_irq(INT_24XX_DSS_IRQ, fbdev); |
| fail1: |
| enable_lcd_clocks(0); |
| put_dss_clocks(); |
| fail0: |
| iounmap(dispc.base); |
| return r; |
| } |
| |
| static void omap_dispc_cleanup(void) |
| { |
| int i; |
| |
| omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED); |
| /* This will also disable clocks that are on */ |
| for (i = 0; i < dispc.mem_desc.region_cnt; i++) |
| omap_dispc_enable_plane(i, 0); |
| cleanup_fbmem(); |
| free_palette_ram(); |
| free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); |
| put_dss_clocks(); |
| iounmap(dispc.base); |
| } |
| |
| const struct lcd_ctrl omap2_int_ctrl = { |
| .name = "internal", |
| .init = omap_dispc_init, |
| .cleanup = omap_dispc_cleanup, |
| .get_caps = omap_dispc_get_caps, |
| .set_update_mode = omap_dispc_set_update_mode, |
| .get_update_mode = omap_dispc_get_update_mode, |
| .update_window = omap_dispc_update_window, |
| .suspend = omap_dispc_suspend, |
| .resume = omap_dispc_resume, |
| .setup_plane = omap_dispc_setup_plane, |
| .setup_mem = omap_dispc_setup_mem, |
| .set_scale = omap_dispc_set_scale, |
| .enable_plane = omap_dispc_enable_plane, |
| .set_color_key = omap_dispc_set_color_key, |
| .get_color_key = omap_dispc_get_color_key, |
| .mmap = omap_dispc_mmap_user, |
| }; |