| /* |
| * Driver for MT9V022 CMOS Image Sensor from Micron |
| * |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/videodev2.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/log2.h> |
| |
| #include <media/v4l2-subdev.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/soc_camera.h> |
| |
| /* |
| * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c |
| * The platform has to define ctruct i2c_board_info objects and link to them |
| * from struct soc_camera_link |
| */ |
| |
| static char *sensor_type; |
| module_param(sensor_type, charp, S_IRUGO); |
| MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); |
| |
| /* mt9v022 selected register addresses */ |
| #define MT9V022_CHIP_VERSION 0x00 |
| #define MT9V022_COLUMN_START 0x01 |
| #define MT9V022_ROW_START 0x02 |
| #define MT9V022_WINDOW_HEIGHT 0x03 |
| #define MT9V022_WINDOW_WIDTH 0x04 |
| #define MT9V022_HORIZONTAL_BLANKING 0x05 |
| #define MT9V022_VERTICAL_BLANKING 0x06 |
| #define MT9V022_CHIP_CONTROL 0x07 |
| #define MT9V022_SHUTTER_WIDTH1 0x08 |
| #define MT9V022_SHUTTER_WIDTH2 0x09 |
| #define MT9V022_SHUTTER_WIDTH_CTRL 0x0a |
| #define MT9V022_TOTAL_SHUTTER_WIDTH 0x0b |
| #define MT9V022_RESET 0x0c |
| #define MT9V022_READ_MODE 0x0d |
| #define MT9V022_MONITOR_MODE 0x0e |
| #define MT9V022_PIXEL_OPERATION_MODE 0x0f |
| #define MT9V022_LED_OUT_CONTROL 0x1b |
| #define MT9V022_ADC_MODE_CONTROL 0x1c |
| #define MT9V022_ANALOG_GAIN 0x35 |
| #define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47 |
| #define MT9V022_PIXCLK_FV_LV 0x74 |
| #define MT9V022_DIGITAL_TEST_PATTERN 0x7f |
| #define MT9V022_AEC_AGC_ENABLE 0xAF |
| #define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD |
| |
| /* Progressive scan, master, defaults */ |
| #define MT9V022_CHIP_CONTROL_DEFAULT 0x188 |
| |
| #define MT9V022_MAX_WIDTH 752 |
| #define MT9V022_MAX_HEIGHT 480 |
| #define MT9V022_MIN_WIDTH 48 |
| #define MT9V022_MIN_HEIGHT 32 |
| #define MT9V022_COLUMN_SKIP 1 |
| #define MT9V022_ROW_SKIP 4 |
| |
| /* MT9V022 has only one fixed colorspace per pixelcode */ |
| struct mt9v022_datafmt { |
| enum v4l2_mbus_pixelcode code; |
| enum v4l2_colorspace colorspace; |
| }; |
| |
| /* Find a data format by a pixel code in an array */ |
| static const struct mt9v022_datafmt *mt9v022_find_datafmt( |
| enum v4l2_mbus_pixelcode code, const struct mt9v022_datafmt *fmt, |
| int n) |
| { |
| int i; |
| for (i = 0; i < n; i++) |
| if (fmt[i].code == code) |
| return fmt + i; |
| |
| return NULL; |
| } |
| |
| static const struct mt9v022_datafmt mt9v022_colour_fmts[] = { |
| /* |
| * Order important: first natively supported, |
| * second supported with a GPIO extender |
| */ |
| {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, |
| {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, |
| }; |
| |
| static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = { |
| /* Order important - see above */ |
| {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, |
| {V4L2_MBUS_FMT_GREY8_1X8, V4L2_COLORSPACE_JPEG}, |
| }; |
| |
| struct mt9v022 { |
| struct v4l2_subdev subdev; |
| struct v4l2_rect rect; /* Sensor window */ |
| const struct mt9v022_datafmt *fmt; |
| const struct mt9v022_datafmt *fmts; |
| int num_fmts; |
| int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ |
| u16 chip_control; |
| unsigned short y_skip_top; /* Lines to skip at the top */ |
| }; |
| |
| static struct mt9v022 *to_mt9v022(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct mt9v022, subdev); |
| } |
| |
| static int reg_read(struct i2c_client *client, const u8 reg) |
| { |
| s32 data = i2c_smbus_read_word_data(client, reg); |
| return data < 0 ? data : swab16(data); |
| } |
| |
| static int reg_write(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| return i2c_smbus_write_word_data(client, reg, swab16(data)); |
| } |
| |
| static int reg_set(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret | data); |
| } |
| |
| static int reg_clear(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret & ~data); |
| } |
| |
| static int mt9v022_init(struct i2c_client *client) |
| { |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| int ret; |
| |
| /* |
| * Almost the default mode: master, parallel, simultaneous, and an |
| * undocumented bit 0x200, which is present in table 7, but not in 8, |
| * plus snapshot mode to disable scan for now |
| */ |
| mt9v022->chip_control |= 0x10; |
| ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control); |
| if (!ret) |
| ret = reg_write(client, MT9V022_READ_MODE, 0x300); |
| |
| /* All defaults */ |
| if (!ret) |
| /* AEC, AGC on */ |
| ret = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x3); |
| if (!ret) |
| ret = reg_write(client, MT9V022_ANALOG_GAIN, 16); |
| if (!ret) |
| ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480); |
| if (!ret) |
| ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); |
| if (!ret) |
| /* default - auto */ |
| ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); |
| if (!ret) |
| ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0); |
| |
| return ret; |
| } |
| |
| static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| if (enable) |
| /* Switch to master "normal" mode */ |
| mt9v022->chip_control &= ~0x10; |
| else |
| /* Switch to snapshot mode */ |
| mt9v022->chip_control |= 0x10; |
| |
| if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0) |
| return -EIO; |
| return 0; |
| } |
| |
| static int mt9v022_set_bus_param(struct soc_camera_device *icd, |
| unsigned long flags) |
| { |
| struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK; |
| int ret; |
| u16 pixclk = 0; |
| |
| /* Only one width bit may be set */ |
| if (!is_power_of_2(width_flag)) |
| return -EINVAL; |
| |
| if (icl->set_bus_param) { |
| ret = icl->set_bus_param(icl, width_flag); |
| if (ret) |
| return ret; |
| } else { |
| /* |
| * Without board specific bus width settings we only support the |
| * sensors native bus width |
| */ |
| if (width_flag != SOCAM_DATAWIDTH_10) |
| return -EINVAL; |
| } |
| |
| flags = soc_camera_apply_sensor_flags(icl, flags); |
| |
| if (flags & SOCAM_PCLK_SAMPLE_RISING) |
| pixclk |= 0x10; |
| |
| if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH)) |
| pixclk |= 0x1; |
| |
| if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH)) |
| pixclk |= 0x2; |
| |
| ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk); |
| if (ret < 0) |
| return ret; |
| |
| if (!(flags & SOCAM_MASTER)) |
| mt9v022->chip_control &= ~0x8; |
| |
| ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control); |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n", |
| pixclk, mt9v022->chip_control); |
| |
| return 0; |
| } |
| |
| static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) |
| { |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| unsigned int width_flag; |
| |
| if (icl->query_bus_param) |
| width_flag = icl->query_bus_param(icl) & |
| SOCAM_DATAWIDTH_MASK; |
| else |
| width_flag = SOCAM_DATAWIDTH_10; |
| |
| return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | |
| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | |
| SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | |
| SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE | |
| width_flag; |
| } |
| |
| static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| struct v4l2_rect rect = a->c; |
| int ret; |
| |
| /* Bayer format - even size lengths */ |
| if (mt9v022->fmts == mt9v022_colour_fmts) { |
| rect.width = ALIGN(rect.width, 2); |
| rect.height = ALIGN(rect.height, 2); |
| /* Let the user play with the starting pixel */ |
| } |
| |
| soc_camera_limit_side(&rect.left, &rect.width, |
| MT9V022_COLUMN_SKIP, MT9V022_MIN_WIDTH, MT9V022_MAX_WIDTH); |
| |
| soc_camera_limit_side(&rect.top, &rect.height, |
| MT9V022_ROW_SKIP, MT9V022_MIN_HEIGHT, MT9V022_MAX_HEIGHT); |
| |
| /* Like in example app. Contradicts the datasheet though */ |
| ret = reg_read(client, MT9V022_AEC_AGC_ENABLE); |
| if (ret >= 0) { |
| if (ret & 1) /* Autoexposure */ |
| ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, |
| rect.height + mt9v022->y_skip_top + 43); |
| else |
| ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, |
| rect.height + mt9v022->y_skip_top + 43); |
| } |
| /* Setup frame format: defaults apart from width and height */ |
| if (!ret) |
| ret = reg_write(client, MT9V022_COLUMN_START, rect.left); |
| if (!ret) |
| ret = reg_write(client, MT9V022_ROW_START, rect.top); |
| if (!ret) |
| /* |
| * Default 94, Phytec driver says: |
| * "width + horizontal blank >= 660" |
| */ |
| ret = reg_write(client, MT9V022_HORIZONTAL_BLANKING, |
| rect.width > 660 - 43 ? 43 : |
| 660 - rect.width); |
| if (!ret) |
| ret = reg_write(client, MT9V022_VERTICAL_BLANKING, 45); |
| if (!ret) |
| ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width); |
| if (!ret) |
| ret = reg_write(client, MT9V022_WINDOW_HEIGHT, |
| rect.height + mt9v022->y_skip_top); |
| |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect.width, rect.height); |
| |
| mt9v022->rect = rect; |
| |
| return 0; |
| } |
| |
| static int mt9v022_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| a->c = mt9v022->rect; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| return 0; |
| } |
| |
| static int mt9v022_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| { |
| a->bounds.left = MT9V022_COLUMN_SKIP; |
| a->bounds.top = MT9V022_ROW_SKIP; |
| a->bounds.width = MT9V022_MAX_WIDTH; |
| a->bounds.height = MT9V022_MAX_HEIGHT; |
| a->defrect = a->bounds; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| a->pixelaspect.numerator = 1; |
| a->pixelaspect.denominator = 1; |
| |
| return 0; |
| } |
| |
| static int mt9v022_g_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| mf->width = mt9v022->rect.width; |
| mf->height = mt9v022->rect.height; |
| mf->code = mt9v022->fmt->code; |
| mf->colorspace = mt9v022->fmt->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| static int mt9v022_s_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| struct v4l2_crop a = { |
| .c = { |
| .left = mt9v022->rect.left, |
| .top = mt9v022->rect.top, |
| .width = mf->width, |
| .height = mf->height, |
| }, |
| }; |
| int ret; |
| |
| /* |
| * The caller provides a supported format, as verified per call to |
| * icd->try_fmt(), datawidth is from our supported format list |
| */ |
| switch (mf->code) { |
| case V4L2_MBUS_FMT_GREY8_1X8: |
| case V4L2_MBUS_FMT_Y10_1X10: |
| if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) |
| return -EINVAL; |
| break; |
| case V4L2_MBUS_FMT_SBGGR8_1X8: |
| case V4L2_MBUS_FMT_SBGGR10_1X10: |
| if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) |
| return -EINVAL; |
| break; |
| case 0: |
| /* No format change, only geometry */ |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* No support for scaling on this camera, just crop. */ |
| ret = mt9v022_s_crop(sd, &a); |
| if (!ret) { |
| mf->width = mt9v022->rect.width; |
| mf->height = mt9v022->rect.height; |
| mt9v022->fmt = mt9v022_find_datafmt(mf->code, |
| mt9v022->fmts, mt9v022->num_fmts); |
| mf->colorspace = mt9v022->fmt->colorspace; |
| } |
| |
| return ret; |
| } |
| |
| static int mt9v022_try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| const struct mt9v022_datafmt *fmt; |
| int align = mf->code == V4L2_MBUS_FMT_SBGGR8_1X8 || |
| mf->code == V4L2_MBUS_FMT_SBGGR10_1X10; |
| |
| v4l_bound_align_image(&mf->width, MT9V022_MIN_WIDTH, |
| MT9V022_MAX_WIDTH, align, |
| &mf->height, MT9V022_MIN_HEIGHT + mt9v022->y_skip_top, |
| MT9V022_MAX_HEIGHT + mt9v022->y_skip_top, align, 0); |
| |
| fmt = mt9v022_find_datafmt(mf->code, mt9v022->fmts, |
| mt9v022->num_fmts); |
| if (!fmt) { |
| fmt = mt9v022->fmt; |
| mf->code = fmt->code; |
| } |
| |
| mf->colorspace = fmt->colorspace; |
| |
| return 0; |
| } |
| |
| static int mt9v022_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) |
| return -EINVAL; |
| |
| if (id->match.addr != client->addr) |
| return -ENODEV; |
| |
| id->ident = mt9v022->model; |
| id->revision = 0; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int mt9v022_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| reg->size = 2; |
| reg->val = reg_read(client, reg->reg); |
| |
| if (reg->val > 0xffff) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int mt9v022_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| if (reg_write(client, reg->reg, reg->val) < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct v4l2_queryctrl mt9v022_controls[] = { |
| { |
| .id = V4L2_CID_VFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Flip Vertically", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, { |
| .id = V4L2_CID_HFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Flip Horizontally", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Analog Gain", |
| .minimum = 64, |
| .maximum = 127, |
| .step = 1, |
| .default_value = 64, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure", |
| .minimum = 1, |
| .maximum = 255, |
| .step = 1, |
| .default_value = 255, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .id = V4L2_CID_AUTOGAIN, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Automatic Gain", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 1, |
| }, { |
| .id = V4L2_CID_EXPOSURE_AUTO, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Automatic Exposure", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 1, |
| } |
| }; |
| |
| static struct soc_camera_ops mt9v022_ops = { |
| .set_bus_param = mt9v022_set_bus_param, |
| .query_bus_param = mt9v022_query_bus_param, |
| .controls = mt9v022_controls, |
| .num_controls = ARRAY_SIZE(mt9v022_controls), |
| }; |
| |
| static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct i2c_client *client = sd->priv; |
| const struct v4l2_queryctrl *qctrl; |
| unsigned long range; |
| int data; |
| |
| qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| data = reg_read(client, MT9V022_READ_MODE); |
| if (data < 0) |
| return -EIO; |
| ctrl->value = !!(data & 0x10); |
| break; |
| case V4L2_CID_HFLIP: |
| data = reg_read(client, MT9V022_READ_MODE); |
| if (data < 0) |
| return -EIO; |
| ctrl->value = !!(data & 0x20); |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| data = reg_read(client, MT9V022_AEC_AGC_ENABLE); |
| if (data < 0) |
| return -EIO; |
| ctrl->value = !!(data & 0x1); |
| break; |
| case V4L2_CID_AUTOGAIN: |
| data = reg_read(client, MT9V022_AEC_AGC_ENABLE); |
| if (data < 0) |
| return -EIO; |
| ctrl->value = !!(data & 0x2); |
| break; |
| case V4L2_CID_GAIN: |
| data = reg_read(client, MT9V022_ANALOG_GAIN); |
| if (data < 0) |
| return -EIO; |
| |
| range = qctrl->maximum - qctrl->minimum; |
| ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum; |
| |
| break; |
| case V4L2_CID_EXPOSURE: |
| data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH); |
| if (data < 0) |
| return -EIO; |
| |
| range = qctrl->maximum - qctrl->minimum; |
| ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum; |
| |
| break; |
| } |
| return 0; |
| } |
| |
| static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| int data; |
| struct i2c_client *client = sd->priv; |
| const struct v4l2_queryctrl *qctrl; |
| |
| qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id); |
| if (!qctrl) |
| return -EINVAL; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| if (ctrl->value) |
| data = reg_set(client, MT9V022_READ_MODE, 0x10); |
| else |
| data = reg_clear(client, MT9V022_READ_MODE, 0x10); |
| if (data < 0) |
| return -EIO; |
| break; |
| case V4L2_CID_HFLIP: |
| if (ctrl->value) |
| data = reg_set(client, MT9V022_READ_MODE, 0x20); |
| else |
| data = reg_clear(client, MT9V022_READ_MODE, 0x20); |
| if (data < 0) |
| return -EIO; |
| break; |
| case V4L2_CID_GAIN: |
| /* mt9v022 has minimum == default */ |
| if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) |
| return -EINVAL; |
| else { |
| unsigned long range = qctrl->maximum - qctrl->minimum; |
| /* Valid values 16 to 64, 32 to 64 must be even. */ |
| unsigned long gain = ((ctrl->value - qctrl->minimum) * |
| 48 + range / 2) / range + 16; |
| if (gain >= 32) |
| gain &= ~1; |
| /* |
| * The user wants to set gain manually, hope, she |
| * knows, what she's doing... Switch AGC off. |
| */ |
| |
| if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0) |
| return -EIO; |
| |
| dev_dbg(&client->dev, "Setting gain from %d to %lu\n", |
| reg_read(client, MT9V022_ANALOG_GAIN), gain); |
| if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0) |
| return -EIO; |
| } |
| break; |
| case V4L2_CID_EXPOSURE: |
| /* mt9v022 has maximum == default */ |
| if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) |
| return -EINVAL; |
| else { |
| unsigned long range = qctrl->maximum - qctrl->minimum; |
| unsigned long shutter = ((ctrl->value - qctrl->minimum) * |
| 479 + range / 2) / range + 1; |
| /* |
| * The user wants to set shutter width manually, hope, |
| * she knows, what she's doing... Switch AEC off. |
| */ |
| |
| if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0) |
| return -EIO; |
| |
| dev_dbg(&client->dev, "Shutter width from %d to %lu\n", |
| reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH), |
| shutter); |
| if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, |
| shutter) < 0) |
| return -EIO; |
| } |
| break; |
| case V4L2_CID_AUTOGAIN: |
| if (ctrl->value) |
| data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2); |
| else |
| data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2); |
| if (data < 0) |
| return -EIO; |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| if (ctrl->value) |
| data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1); |
| else |
| data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1); |
| if (data < 0) |
| return -EIO; |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * Interface active, can use i2c. If it fails, it can indeed mean, that |
| * this wasn't our capture interface, so, we wait for the right one |
| */ |
| static int mt9v022_video_probe(struct soc_camera_device *icd, |
| struct i2c_client *client) |
| { |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| s32 data; |
| int ret; |
| unsigned long flags; |
| |
| if (!icd->dev.parent || |
| to_soc_camera_host(icd->dev.parent)->nr != icd->iface) |
| return -ENODEV; |
| |
| /* Read out the chip version register */ |
| data = reg_read(client, MT9V022_CHIP_VERSION); |
| |
| /* must be 0x1311 or 0x1313 */ |
| if (data != 0x1311 && data != 0x1313) { |
| ret = -ENODEV; |
| dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n", |
| data); |
| goto ei2c; |
| } |
| |
| /* Soft reset */ |
| ret = reg_write(client, MT9V022_RESET, 1); |
| if (ret < 0) |
| goto ei2c; |
| /* 15 clock cycles */ |
| udelay(200); |
| if (reg_read(client, MT9V022_RESET)) { |
| dev_err(&client->dev, "Resetting MT9V022 failed!\n"); |
| if (ret > 0) |
| ret = -EIO; |
| goto ei2c; |
| } |
| |
| /* Set monochrome or colour sensor type */ |
| if (sensor_type && (!strcmp("colour", sensor_type) || |
| !strcmp("color", sensor_type))) { |
| ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11); |
| mt9v022->model = V4L2_IDENT_MT9V022IX7ATC; |
| mt9v022->fmts = mt9v022_colour_fmts; |
| } else { |
| ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 0x11); |
| mt9v022->model = V4L2_IDENT_MT9V022IX7ATM; |
| mt9v022->fmts = mt9v022_monochrome_fmts; |
| } |
| |
| if (ret < 0) |
| goto ei2c; |
| |
| mt9v022->num_fmts = 0; |
| |
| /* |
| * This is a 10bit sensor, so by default we only allow 10bit. |
| * The platform may support different bus widths due to |
| * different routing of the data lines. |
| */ |
| if (icl->query_bus_param) |
| flags = icl->query_bus_param(icl); |
| else |
| flags = SOCAM_DATAWIDTH_10; |
| |
| if (flags & SOCAM_DATAWIDTH_10) |
| mt9v022->num_fmts++; |
| else |
| mt9v022->fmts++; |
| |
| if (flags & SOCAM_DATAWIDTH_8) |
| mt9v022->num_fmts++; |
| |
| mt9v022->fmt = &mt9v022->fmts[0]; |
| |
| dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n", |
| data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ? |
| "monochrome" : "colour"); |
| |
| ret = mt9v022_init(client); |
| if (ret < 0) |
| dev_err(&client->dev, "Failed to initialise the camera\n"); |
| |
| ei2c: |
| return ret; |
| } |
| |
| static void mt9v022_video_remove(struct soc_camera_device *icd) |
| { |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| |
| dev_dbg(&icd->dev, "Video removed: %p, %p\n", |
| icd->dev.parent, icd->vdev); |
| if (icl->free_bus) |
| icl->free_bus(icl); |
| } |
| |
| static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| *lines = mt9v022->y_skip_top; |
| |
| return 0; |
| } |
| |
| static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { |
| .g_ctrl = mt9v022_g_ctrl, |
| .s_ctrl = mt9v022_s_ctrl, |
| .g_chip_ident = mt9v022_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = mt9v022_g_register, |
| .s_register = mt9v022_s_register, |
| #endif |
| }; |
| |
| static int mt9v022_enum_fmt(struct v4l2_subdev *sd, int index, |
| enum v4l2_mbus_pixelcode *code) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| |
| if ((unsigned int)index >= mt9v022->num_fmts) |
| return -EINVAL; |
| |
| *code = mt9v022->fmts[index].code; |
| return 0; |
| } |
| |
| static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { |
| .s_stream = mt9v022_s_stream, |
| .s_mbus_fmt = mt9v022_s_fmt, |
| .g_mbus_fmt = mt9v022_g_fmt, |
| .try_mbus_fmt = mt9v022_try_fmt, |
| .s_crop = mt9v022_s_crop, |
| .g_crop = mt9v022_g_crop, |
| .cropcap = mt9v022_cropcap, |
| .enum_mbus_fmt = mt9v022_enum_fmt, |
| }; |
| |
| static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = { |
| .g_skip_top_lines = mt9v022_g_skip_top_lines, |
| }; |
| |
| static struct v4l2_subdev_ops mt9v022_subdev_ops = { |
| .core = &mt9v022_subdev_core_ops, |
| .video = &mt9v022_subdev_video_ops, |
| .sensor = &mt9v022_subdev_sensor_ops, |
| }; |
| |
| static int mt9v022_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct mt9v022 *mt9v022; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct soc_camera_link *icl; |
| int ret; |
| |
| if (!icd) { |
| dev_err(&client->dev, "MT9V022: missing soc-camera data!\n"); |
| return -EINVAL; |
| } |
| |
| icl = to_soc_camera_link(icd); |
| if (!icl) { |
| dev_err(&client->dev, "MT9V022 driver needs platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { |
| dev_warn(&adapter->dev, |
| "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); |
| return -EIO; |
| } |
| |
| mt9v022 = kzalloc(sizeof(struct mt9v022), GFP_KERNEL); |
| if (!mt9v022) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops); |
| |
| mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; |
| |
| icd->ops = &mt9v022_ops; |
| /* |
| * MT9V022 _really_ corrupts the first read out line. |
| * TODO: verify on i.MX31 |
| */ |
| mt9v022->y_skip_top = 1; |
| mt9v022->rect.left = MT9V022_COLUMN_SKIP; |
| mt9v022->rect.top = MT9V022_ROW_SKIP; |
| mt9v022->rect.width = MT9V022_MAX_WIDTH; |
| mt9v022->rect.height = MT9V022_MAX_HEIGHT; |
| |
| ret = mt9v022_video_probe(icd, client); |
| if (ret) { |
| icd->ops = NULL; |
| i2c_set_clientdata(client, NULL); |
| kfree(mt9v022); |
| } |
| |
| return ret; |
| } |
| |
| static int mt9v022_remove(struct i2c_client *client) |
| { |
| struct mt9v022 *mt9v022 = to_mt9v022(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| |
| icd->ops = NULL; |
| mt9v022_video_remove(icd); |
| i2c_set_clientdata(client, NULL); |
| client->driver = NULL; |
| kfree(mt9v022); |
| |
| return 0; |
| } |
| static const struct i2c_device_id mt9v022_id[] = { |
| { "mt9v022", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mt9v022_id); |
| |
| static struct i2c_driver mt9v022_i2c_driver = { |
| .driver = { |
| .name = "mt9v022", |
| }, |
| .probe = mt9v022_probe, |
| .remove = mt9v022_remove, |
| .id_table = mt9v022_id, |
| }; |
| |
| static int __init mt9v022_mod_init(void) |
| { |
| return i2c_add_driver(&mt9v022_i2c_driver); |
| } |
| |
| static void __exit mt9v022_mod_exit(void) |
| { |
| i2c_del_driver(&mt9v022_i2c_driver); |
| } |
| |
| module_init(mt9v022_mod_init); |
| module_exit(mt9v022_mod_exit); |
| |
| MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); |
| MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); |
| MODULE_LICENSE("GPL"); |