| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef __LINUX_COMPILER_H |
| #define __LINUX_COMPILER_H |
| |
| #include <linux/compiler_types.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| #ifdef __KERNEL__ |
| |
| /* |
| * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code |
| * to disable branch tracing on a per file basis. |
| */ |
| #if defined(CONFIG_TRACE_BRANCH_PROFILING) \ |
| && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__) |
| void ftrace_likely_update(struct ftrace_likely_data *f, int val, |
| int expect, int is_constant); |
| |
| #define likely_notrace(x) __builtin_expect(!!(x), 1) |
| #define unlikely_notrace(x) __builtin_expect(!!(x), 0) |
| |
| #define __branch_check__(x, expect, is_constant) ({ \ |
| long ______r; \ |
| static struct ftrace_likely_data \ |
| __attribute__((__aligned__(4))) \ |
| __attribute__((section("_ftrace_annotated_branch"))) \ |
| ______f = { \ |
| .data.func = __func__, \ |
| .data.file = __FILE__, \ |
| .data.line = __LINE__, \ |
| }; \ |
| ______r = __builtin_expect(!!(x), expect); \ |
| ftrace_likely_update(&______f, ______r, \ |
| expect, is_constant); \ |
| ______r; \ |
| }) |
| |
| /* |
| * Using __builtin_constant_p(x) to ignore cases where the return |
| * value is always the same. This idea is taken from a similar patch |
| * written by Daniel Walker. |
| */ |
| # ifndef likely |
| # define likely(x) (__branch_check__(x, 1, __builtin_constant_p(x))) |
| # endif |
| # ifndef unlikely |
| # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) |
| # endif |
| |
| #ifdef CONFIG_PROFILE_ALL_BRANCHES |
| /* |
| * "Define 'is'", Bill Clinton |
| * "Define 'if'", Steven Rostedt |
| */ |
| #define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) ) |
| #define __trace_if(cond) \ |
| if (__builtin_constant_p(!!(cond)) ? !!(cond) : \ |
| ({ \ |
| int ______r; \ |
| static struct ftrace_branch_data \ |
| __attribute__((__aligned__(4))) \ |
| __attribute__((section("_ftrace_branch"))) \ |
| ______f = { \ |
| .func = __func__, \ |
| .file = __FILE__, \ |
| .line = __LINE__, \ |
| }; \ |
| ______r = !!(cond); \ |
| ______f.miss_hit[______r]++; \ |
| ______r; \ |
| })) |
| #endif /* CONFIG_PROFILE_ALL_BRANCHES */ |
| |
| #else |
| # define likely(x) __builtin_expect(!!(x), 1) |
| # define unlikely(x) __builtin_expect(!!(x), 0) |
| #endif |
| |
| /* Optimization barrier */ |
| #ifndef barrier |
| # define barrier() __memory_barrier() |
| #endif |
| |
| #ifndef barrier_data |
| # define barrier_data(ptr) barrier() |
| #endif |
| |
| /* workaround for GCC PR82365 if needed */ |
| #ifndef barrier_before_unreachable |
| # define barrier_before_unreachable() do { } while (0) |
| #endif |
| |
| /* Unreachable code */ |
| #ifdef CONFIG_STACK_VALIDATION |
| #define annotate_reachable() ({ \ |
| asm("%c0:\n\t" \ |
| ".pushsection .discard.reachable\n\t" \ |
| ".long %c0b - .\n\t" \ |
| ".popsection\n\t" : : "i" (__COUNTER__)); \ |
| }) |
| #define annotate_unreachable() ({ \ |
| asm("%c0:\n\t" \ |
| ".pushsection .discard.unreachable\n\t" \ |
| ".long %c0b - .\n\t" \ |
| ".popsection\n\t" : : "i" (__COUNTER__)); \ |
| }) |
| #define ASM_UNREACHABLE \ |
| "999:\n\t" \ |
| ".pushsection .discard.unreachable\n\t" \ |
| ".long 999b - .\n\t" \ |
| ".popsection\n\t" |
| #else |
| #define annotate_reachable() |
| #define annotate_unreachable() |
| #endif |
| |
| #ifndef ASM_UNREACHABLE |
| # define ASM_UNREACHABLE |
| #endif |
| #ifndef unreachable |
| # define unreachable() do { annotate_reachable(); do { } while (1); } while (0) |
| #endif |
| |
| /* |
| * KENTRY - kernel entry point |
| * This can be used to annotate symbols (functions or data) that are used |
| * without their linker symbol being referenced explicitly. For example, |
| * interrupt vector handlers, or functions in the kernel image that are found |
| * programatically. |
| * |
| * Not required for symbols exported with EXPORT_SYMBOL, or initcalls. Those |
| * are handled in their own way (with KEEP() in linker scripts). |
| * |
| * KENTRY can be avoided if the symbols in question are marked as KEEP() in the |
| * linker script. For example an architecture could KEEP() its entire |
| * boot/exception vector code rather than annotate each function and data. |
| */ |
| #ifndef KENTRY |
| # define KENTRY(sym) \ |
| extern typeof(sym) sym; \ |
| static const unsigned long __kentry_##sym \ |
| __used \ |
| __attribute__((section("___kentry" "+" #sym ), used)) \ |
| = (unsigned long)&sym; |
| #endif |
| |
| #ifndef RELOC_HIDE |
| # define RELOC_HIDE(ptr, off) \ |
| ({ unsigned long __ptr; \ |
| __ptr = (unsigned long) (ptr); \ |
| (typeof(ptr)) (__ptr + (off)); }) |
| #endif |
| |
| #ifndef OPTIMIZER_HIDE_VAR |
| #define OPTIMIZER_HIDE_VAR(var) barrier() |
| #endif |
| |
| /* Not-quite-unique ID. */ |
| #ifndef __UNIQUE_ID |
| # define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__) |
| #endif |
| |
| #include <uapi/linux/types.h> |
| |
| #define __READ_ONCE_SIZE \ |
| ({ \ |
| switch (size) { \ |
| case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \ |
| case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \ |
| case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \ |
| case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \ |
| default: \ |
| barrier(); \ |
| __builtin_memcpy((void *)res, (const void *)p, size); \ |
| barrier(); \ |
| } \ |
| }) |
| |
| static __always_inline |
| void __read_once_size(const volatile void *p, void *res, int size) |
| { |
| __READ_ONCE_SIZE; |
| } |
| |
| #ifdef CONFIG_KASAN |
| /* |
| * We can't declare function 'inline' because __no_sanitize_address confilcts |
| * with inlining. Attempt to inline it may cause a build failure. |
| * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 |
| * '__maybe_unused' allows us to avoid defined-but-not-used warnings. |
| */ |
| # define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused |
| #else |
| # define __no_kasan_or_inline __always_inline |
| #endif |
| |
| static __no_kasan_or_inline |
| void __read_once_size_nocheck(const volatile void *p, void *res, int size) |
| { |
| __READ_ONCE_SIZE; |
| } |
| |
| static __always_inline void __write_once_size(volatile void *p, void *res, int size) |
| { |
| switch (size) { |
| case 1: *(volatile __u8 *)p = *(__u8 *)res; break; |
| case 2: *(volatile __u16 *)p = *(__u16 *)res; break; |
| case 4: *(volatile __u32 *)p = *(__u32 *)res; break; |
| case 8: *(volatile __u64 *)p = *(__u64 *)res; break; |
| default: |
| barrier(); |
| __builtin_memcpy((void *)p, (const void *)res, size); |
| barrier(); |
| } |
| } |
| |
| /* |
| * Prevent the compiler from merging or refetching reads or writes. The |
| * compiler is also forbidden from reordering successive instances of |
| * READ_ONCE, WRITE_ONCE and ACCESS_ONCE (see below), but only when the |
| * compiler is aware of some particular ordering. One way to make the |
| * compiler aware of ordering is to put the two invocations of READ_ONCE, |
| * WRITE_ONCE or ACCESS_ONCE() in different C statements. |
| * |
| * In contrast to ACCESS_ONCE these two macros will also work on aggregate |
| * data types like structs or unions. If the size of the accessed data |
| * type exceeds the word size of the machine (e.g., 32 bits or 64 bits) |
| * READ_ONCE() and WRITE_ONCE() will fall back to memcpy(). There's at |
| * least two memcpy()s: one for the __builtin_memcpy() and then one for |
| * the macro doing the copy of variable - '__u' allocated on the stack. |
| * |
| * Their two major use cases are: (1) Mediating communication between |
| * process-level code and irq/NMI handlers, all running on the same CPU, |
| * and (2) Ensuring that the compiler does not fold, spindle, or otherwise |
| * mutilate accesses that either do not require ordering or that interact |
| * with an explicit memory barrier or atomic instruction that provides the |
| * required ordering. |
| */ |
| #include <asm/barrier.h> |
| #include <linux/kasan-checks.h> |
| |
| #define __READ_ONCE(x, check) \ |
| ({ \ |
| union { typeof(x) __val; char __c[1]; } __u; \ |
| if (check) \ |
| __read_once_size(&(x), __u.__c, sizeof(x)); \ |
| else \ |
| __read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \ |
| smp_read_barrier_depends(); /* Enforce dependency ordering from x */ \ |
| __u.__val; \ |
| }) |
| #define READ_ONCE(x) __READ_ONCE(x, 1) |
| |
| /* |
| * Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need |
| * to hide memory access from KASAN. |
| */ |
| #define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0) |
| |
| static __no_kasan_or_inline |
| unsigned long read_word_at_a_time(const void *addr) |
| { |
| kasan_check_read(addr, 1); |
| return *(unsigned long *)addr; |
| } |
| |
| #define WRITE_ONCE(x, val) \ |
| ({ \ |
| union { typeof(x) __val; char __c[1]; } __u = \ |
| { .__val = (__force typeof(x)) (val) }; \ |
| __write_once_size(&(x), __u.__c, sizeof(x)); \ |
| __u.__val; \ |
| }) |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #ifndef __optimize |
| # define __optimize(level) |
| #endif |
| |
| /* Compile time object size, -1 for unknown */ |
| #ifndef __compiletime_object_size |
| # define __compiletime_object_size(obj) -1 |
| #endif |
| #ifndef __compiletime_warning |
| # define __compiletime_warning(message) |
| #endif |
| #ifndef __compiletime_error |
| # define __compiletime_error(message) |
| /* |
| * Sparse complains of variable sized arrays due to the temporary variable in |
| * __compiletime_assert. Unfortunately we can't just expand it out to make |
| * sparse see a constant array size without breaking compiletime_assert on old |
| * versions of GCC (e.g. 4.2.4), so hide the array from sparse altogether. |
| */ |
| # ifndef __CHECKER__ |
| # define __compiletime_error_fallback(condition) \ |
| do { ((void)sizeof(char[1 - 2 * condition])); } while (0) |
| # endif |
| #endif |
| #ifndef __compiletime_error_fallback |
| # define __compiletime_error_fallback(condition) do { } while (0) |
| #endif |
| |
| #ifdef __OPTIMIZE__ |
| # define __compiletime_assert(condition, msg, prefix, suffix) \ |
| do { \ |
| bool __cond = !(condition); \ |
| extern void prefix ## suffix(void) __compiletime_error(msg); \ |
| if (__cond) \ |
| prefix ## suffix(); \ |
| __compiletime_error_fallback(__cond); \ |
| } while (0) |
| #else |
| # define __compiletime_assert(condition, msg, prefix, suffix) do { } while (0) |
| #endif |
| |
| #define _compiletime_assert(condition, msg, prefix, suffix) \ |
| __compiletime_assert(condition, msg, prefix, suffix) |
| |
| /** |
| * compiletime_assert - break build and emit msg if condition is false |
| * @condition: a compile-time constant condition to check |
| * @msg: a message to emit if condition is false |
| * |
| * In tradition of POSIX assert, this macro will break the build if the |
| * supplied condition is *false*, emitting the supplied error message if the |
| * compiler has support to do so. |
| */ |
| #define compiletime_assert(condition, msg) \ |
| _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) |
| |
| #define compiletime_assert_atomic_type(t) \ |
| compiletime_assert(__native_word(t), \ |
| "Need native word sized stores/loads for atomicity.") |
| |
| /* |
| * Prevent the compiler from merging or refetching accesses. The compiler |
| * is also forbidden from reordering successive instances of ACCESS_ONCE(), |
| * but only when the compiler is aware of some particular ordering. One way |
| * to make the compiler aware of ordering is to put the two invocations of |
| * ACCESS_ONCE() in different C statements. |
| * |
| * ACCESS_ONCE will only work on scalar types. For union types, ACCESS_ONCE |
| * on a union member will work as long as the size of the member matches the |
| * size of the union and the size is smaller than word size. |
| * |
| * The major use cases of ACCESS_ONCE used to be (1) Mediating communication |
| * between process-level code and irq/NMI handlers, all running on the same CPU, |
| * and (2) Ensuring that the compiler does not fold, spindle, or otherwise |
| * mutilate accesses that either do not require ordering or that interact |
| * with an explicit memory barrier or atomic instruction that provides the |
| * required ordering. |
| * |
| * If possible use READ_ONCE()/WRITE_ONCE() instead. |
| */ |
| #define __ACCESS_ONCE(x) ({ \ |
| __maybe_unused typeof(x) __var = (__force typeof(x)) 0; \ |
| (volatile typeof(x) *)&(x); }) |
| #define ACCESS_ONCE(x) (*__ACCESS_ONCE(x)) |
| |
| /** |
| * lockless_dereference() - safely load a pointer for later dereference |
| * @p: The pointer to load |
| * |
| * Similar to rcu_dereference(), but for situations where the pointed-to |
| * object's lifetime is managed by something other than RCU. That |
| * "something other" might be reference counting or simple immortality. |
| * |
| * The seemingly unused variable ___typecheck_p validates that @p is |
| * indeed a pointer type by using a pointer to typeof(*p) as the type. |
| * Taking a pointer to typeof(*p) again is needed in case p is void *. |
| */ |
| #define lockless_dereference(p) \ |
| ({ \ |
| typeof(p) _________p1 = READ_ONCE(p); \ |
| typeof(*(p)) *___typecheck_p __maybe_unused; \ |
| smp_read_barrier_depends(); /* Dependency order vs. p above. */ \ |
| (_________p1); \ |
| }) |
| |
| #endif /* __LINUX_COMPILER_H */ |