| /* |
| * Simplest possible simple frame-buffer driver, as a platform device |
| * |
| * Copyright (c) 2013, Stephen Warren |
| * |
| * Based on q40fb.c, which was: |
| * Copyright (C) 2001 Richard Zidlicky <rz@linux-m68k.org> |
| * |
| * Also based on offb.c, which was: |
| * Copyright (C) 1997 Geert Uytterhoeven |
| * Copyright (C) 1996 Paul Mackerras |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/fb.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/simplefb.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/parser.h> |
| #include <linux/regulator/consumer.h> |
| |
| static const struct fb_fix_screeninfo simplefb_fix = { |
| .id = "simple", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_TRUECOLOR, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static const struct fb_var_screeninfo simplefb_var = { |
| .height = -1, |
| .width = -1, |
| .activate = FB_ACTIVATE_NOW, |
| .vmode = FB_VMODE_NONINTERLACED, |
| }; |
| |
| #define PSEUDO_PALETTE_SIZE 16 |
| |
| static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info) |
| { |
| u32 *pal = info->pseudo_palette; |
| u32 cr = red >> (16 - info->var.red.length); |
| u32 cg = green >> (16 - info->var.green.length); |
| u32 cb = blue >> (16 - info->var.blue.length); |
| u32 value; |
| |
| if (regno >= PSEUDO_PALETTE_SIZE) |
| return -EINVAL; |
| |
| value = (cr << info->var.red.offset) | |
| (cg << info->var.green.offset) | |
| (cb << info->var.blue.offset); |
| if (info->var.transp.length > 0) { |
| u32 mask = (1 << info->var.transp.length) - 1; |
| mask <<= info->var.transp.offset; |
| value |= mask; |
| } |
| pal[regno] = value; |
| |
| return 0; |
| } |
| |
| struct simplefb_par; |
| static void simplefb_clocks_destroy(struct simplefb_par *par); |
| static void simplefb_regulators_destroy(struct simplefb_par *par); |
| |
| static void simplefb_destroy(struct fb_info *info) |
| { |
| simplefb_regulators_destroy(info->par); |
| simplefb_clocks_destroy(info->par); |
| if (info->screen_base) |
| iounmap(info->screen_base); |
| } |
| |
| static struct fb_ops simplefb_ops = { |
| .owner = THIS_MODULE, |
| .fb_destroy = simplefb_destroy, |
| .fb_setcolreg = simplefb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| static struct simplefb_format simplefb_formats[] = SIMPLEFB_FORMATS; |
| |
| struct simplefb_params { |
| u32 width; |
| u32 height; |
| u32 stride; |
| struct simplefb_format *format; |
| }; |
| |
| static int simplefb_parse_dt(struct platform_device *pdev, |
| struct simplefb_params *params) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| const char *format; |
| int i; |
| |
| ret = of_property_read_u32(np, "width", ¶ms->width); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't parse width property\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(np, "height", ¶ms->height); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't parse height property\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(np, "stride", ¶ms->stride); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't parse stride property\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_string(np, "format", &format); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't parse format property\n"); |
| return ret; |
| } |
| params->format = NULL; |
| for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { |
| if (strcmp(format, simplefb_formats[i].name)) |
| continue; |
| params->format = &simplefb_formats[i]; |
| break; |
| } |
| if (!params->format) { |
| dev_err(&pdev->dev, "Invalid format value\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int simplefb_parse_pd(struct platform_device *pdev, |
| struct simplefb_params *params) |
| { |
| struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev); |
| int i; |
| |
| params->width = pd->width; |
| params->height = pd->height; |
| params->stride = pd->stride; |
| |
| params->format = NULL; |
| for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { |
| if (strcmp(pd->format, simplefb_formats[i].name)) |
| continue; |
| |
| params->format = &simplefb_formats[i]; |
| break; |
| } |
| |
| if (!params->format) { |
| dev_err(&pdev->dev, "Invalid format value\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| struct simplefb_par { |
| u32 palette[PSEUDO_PALETTE_SIZE]; |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK |
| bool clks_enabled; |
| unsigned int clk_count; |
| struct clk **clks; |
| #endif |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR |
| bool regulators_enabled; |
| u32 regulator_count; |
| struct regulator **regulators; |
| #endif |
| }; |
| |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK |
| /* |
| * Clock handling code. |
| * |
| * Here we handle the clocks property of our "simple-framebuffer" dt node. |
| * This is necessary so that we can make sure that any clocks needed by |
| * the display engine that the bootloader set up for us (and for which it |
| * provided a simplefb dt node), stay up, for the life of the simplefb |
| * driver. |
| * |
| * When the driver unloads, we cleanly disable, and then release the clocks. |
| * |
| * We only complain about errors here, no action is taken as the most likely |
| * error can only happen due to a mismatch between the bootloader which set |
| * up simplefb, and the clock definitions in the device tree. Chances are |
| * that there are no adverse effects, and if there are, a clean teardown of |
| * the fb probe will not help us much either. So just complain and carry on, |
| * and hope that the user actually gets a working fb at the end of things. |
| */ |
| static int simplefb_clocks_get(struct simplefb_par *par, |
| struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct clk *clock; |
| int i; |
| |
| if (dev_get_platdata(&pdev->dev) || !np) |
| return 0; |
| |
| par->clk_count = of_clk_get_parent_count(np); |
| if (!par->clk_count) |
| return 0; |
| |
| par->clks = kcalloc(par->clk_count, sizeof(struct clk *), GFP_KERNEL); |
| if (!par->clks) |
| return -ENOMEM; |
| |
| for (i = 0; i < par->clk_count; i++) { |
| clock = of_clk_get(np, i); |
| if (IS_ERR(clock)) { |
| if (PTR_ERR(clock) == -EPROBE_DEFER) { |
| while (--i >= 0) { |
| if (par->clks[i]) |
| clk_put(par->clks[i]); |
| } |
| kfree(par->clks); |
| return -EPROBE_DEFER; |
| } |
| dev_err(&pdev->dev, "%s: clock %d not found: %ld\n", |
| __func__, i, PTR_ERR(clock)); |
| continue; |
| } |
| par->clks[i] = clock; |
| } |
| |
| return 0; |
| } |
| |
| static void simplefb_clocks_enable(struct simplefb_par *par, |
| struct platform_device *pdev) |
| { |
| int i, ret; |
| |
| for (i = 0; i < par->clk_count; i++) { |
| if (par->clks[i]) { |
| ret = clk_prepare_enable(par->clks[i]); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "%s: failed to enable clock %d: %d\n", |
| __func__, i, ret); |
| clk_put(par->clks[i]); |
| par->clks[i] = NULL; |
| } |
| } |
| } |
| par->clks_enabled = true; |
| } |
| |
| static void simplefb_clocks_destroy(struct simplefb_par *par) |
| { |
| int i; |
| |
| if (!par->clks) |
| return; |
| |
| for (i = 0; i < par->clk_count; i++) { |
| if (par->clks[i]) { |
| if (par->clks_enabled) |
| clk_disable_unprepare(par->clks[i]); |
| clk_put(par->clks[i]); |
| } |
| } |
| |
| kfree(par->clks); |
| } |
| #else |
| static int simplefb_clocks_get(struct simplefb_par *par, |
| struct platform_device *pdev) { return 0; } |
| static void simplefb_clocks_enable(struct simplefb_par *par, |
| struct platform_device *pdev) { } |
| static void simplefb_clocks_destroy(struct simplefb_par *par) { } |
| #endif |
| |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR |
| |
| #define SUPPLY_SUFFIX "-supply" |
| |
| /* |
| * Regulator handling code. |
| * |
| * Here we handle the num-supplies and vin*-supply properties of our |
| * "simple-framebuffer" dt node. This is necessary so that we can make sure |
| * that any regulators needed by the display hardware that the bootloader |
| * set up for us (and for which it provided a simplefb dt node), stay up, |
| * for the life of the simplefb driver. |
| * |
| * When the driver unloads, we cleanly disable, and then release the |
| * regulators. |
| * |
| * We only complain about errors here, no action is taken as the most likely |
| * error can only happen due to a mismatch between the bootloader which set |
| * up simplefb, and the regulator definitions in the device tree. Chances are |
| * that there are no adverse effects, and if there are, a clean teardown of |
| * the fb probe will not help us much either. So just complain and carry on, |
| * and hope that the user actually gets a working fb at the end of things. |
| */ |
| static int simplefb_regulators_get(struct simplefb_par *par, |
| struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct property *prop; |
| struct regulator *regulator; |
| const char *p; |
| int count = 0, i = 0; |
| |
| if (dev_get_platdata(&pdev->dev) || !np) |
| return 0; |
| |
| /* Count the number of regulator supplies */ |
| for_each_property_of_node(np, prop) { |
| p = strstr(prop->name, SUPPLY_SUFFIX); |
| if (p && p != prop->name) |
| count++; |
| } |
| |
| if (!count) |
| return 0; |
| |
| par->regulators = devm_kcalloc(&pdev->dev, count, |
| sizeof(struct regulator *), GFP_KERNEL); |
| if (!par->regulators) |
| return -ENOMEM; |
| |
| /* Get all the regulators */ |
| for_each_property_of_node(np, prop) { |
| char name[32]; /* 32 is max size of property name */ |
| |
| p = strstr(prop->name, SUPPLY_SUFFIX); |
| if (!p || p == prop->name) |
| continue; |
| |
| strlcpy(name, prop->name, |
| strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1); |
| regulator = devm_regulator_get_optional(&pdev->dev, name); |
| if (IS_ERR(regulator)) { |
| if (PTR_ERR(regulator) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(&pdev->dev, "regulator %s not found: %ld\n", |
| name, PTR_ERR(regulator)); |
| continue; |
| } |
| par->regulators[i++] = regulator; |
| } |
| par->regulator_count = i; |
| |
| return 0; |
| } |
| |
| static void simplefb_regulators_enable(struct simplefb_par *par, |
| struct platform_device *pdev) |
| { |
| int i, ret; |
| |
| /* Enable all the regulators */ |
| for (i = 0; i < par->regulator_count; i++) { |
| ret = regulator_enable(par->regulators[i]); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "failed to enable regulator %d: %d\n", |
| i, ret); |
| devm_regulator_put(par->regulators[i]); |
| par->regulators[i] = NULL; |
| } |
| } |
| par->regulators_enabled = true; |
| } |
| |
| static void simplefb_regulators_destroy(struct simplefb_par *par) |
| { |
| int i; |
| |
| if (!par->regulators || !par->regulators_enabled) |
| return; |
| |
| for (i = 0; i < par->regulator_count; i++) |
| if (par->regulators[i]) |
| regulator_disable(par->regulators[i]); |
| } |
| #else |
| static int simplefb_regulators_get(struct simplefb_par *par, |
| struct platform_device *pdev) { return 0; } |
| static void simplefb_regulators_enable(struct simplefb_par *par, |
| struct platform_device *pdev) { } |
| static void simplefb_regulators_destroy(struct simplefb_par *par) { } |
| #endif |
| |
| static int simplefb_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct simplefb_params params; |
| struct fb_info *info; |
| struct simplefb_par *par; |
| struct resource *mem; |
| |
| if (fb_get_options("simplefb", NULL)) |
| return -ENODEV; |
| |
| ret = -ENODEV; |
| if (dev_get_platdata(&pdev->dev)) |
| ret = simplefb_parse_pd(pdev, ¶ms); |
| else if (pdev->dev.of_node) |
| ret = simplefb_parse_dt(pdev, ¶ms); |
| |
| if (ret) |
| return ret; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) { |
| dev_err(&pdev->dev, "No memory resource\n"); |
| return -EINVAL; |
| } |
| |
| info = framebuffer_alloc(sizeof(struct simplefb_par), &pdev->dev); |
| if (!info) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, info); |
| |
| par = info->par; |
| |
| info->fix = simplefb_fix; |
| info->fix.smem_start = mem->start; |
| info->fix.smem_len = resource_size(mem); |
| info->fix.line_length = params.stride; |
| |
| info->var = simplefb_var; |
| info->var.xres = params.width; |
| info->var.yres = params.height; |
| info->var.xres_virtual = params.width; |
| info->var.yres_virtual = params.height; |
| info->var.bits_per_pixel = params.format->bits_per_pixel; |
| info->var.red = params.format->red; |
| info->var.green = params.format->green; |
| info->var.blue = params.format->blue; |
| info->var.transp = params.format->transp; |
| |
| info->apertures = alloc_apertures(1); |
| if (!info->apertures) { |
| ret = -ENOMEM; |
| goto error_fb_release; |
| } |
| info->apertures->ranges[0].base = info->fix.smem_start; |
| info->apertures->ranges[0].size = info->fix.smem_len; |
| |
| info->fbops = &simplefb_ops; |
| info->flags = FBINFO_DEFAULT | FBINFO_MISC_FIRMWARE; |
| info->screen_base = ioremap_wc(info->fix.smem_start, |
| info->fix.smem_len); |
| if (!info->screen_base) { |
| ret = -ENOMEM; |
| goto error_fb_release; |
| } |
| info->pseudo_palette = par->palette; |
| |
| ret = simplefb_clocks_get(par, pdev); |
| if (ret < 0) |
| goto error_unmap; |
| |
| ret = simplefb_regulators_get(par, pdev); |
| if (ret < 0) |
| goto error_clocks; |
| |
| simplefb_clocks_enable(par, pdev); |
| simplefb_regulators_enable(par, pdev); |
| |
| dev_info(&pdev->dev, "framebuffer at 0x%lx, 0x%x bytes, mapped to 0x%p\n", |
| info->fix.smem_start, info->fix.smem_len, |
| info->screen_base); |
| dev_info(&pdev->dev, "format=%s, mode=%dx%dx%d, linelength=%d\n", |
| params.format->name, |
| info->var.xres, info->var.yres, |
| info->var.bits_per_pixel, info->fix.line_length); |
| |
| ret = register_framebuffer(info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret); |
| goto error_regulators; |
| } |
| |
| dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node); |
| |
| return 0; |
| |
| error_regulators: |
| simplefb_regulators_destroy(par); |
| error_clocks: |
| simplefb_clocks_destroy(par); |
| error_unmap: |
| iounmap(info->screen_base); |
| error_fb_release: |
| framebuffer_release(info); |
| return ret; |
| } |
| |
| static int simplefb_remove(struct platform_device *pdev) |
| { |
| struct fb_info *info = platform_get_drvdata(pdev); |
| |
| unregister_framebuffer(info); |
| framebuffer_release(info); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id simplefb_of_match[] = { |
| { .compatible = "simple-framebuffer", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, simplefb_of_match); |
| |
| static struct platform_driver simplefb_driver = { |
| .driver = { |
| .name = "simple-framebuffer", |
| .of_match_table = simplefb_of_match, |
| }, |
| .probe = simplefb_probe, |
| .remove = simplefb_remove, |
| }; |
| |
| static int __init simplefb_init(void) |
| { |
| int ret; |
| struct device_node *np; |
| |
| ret = platform_driver_register(&simplefb_driver); |
| if (ret) |
| return ret; |
| |
| if (IS_ENABLED(CONFIG_OF_ADDRESS) && of_chosen) { |
| for_each_child_of_node(of_chosen, np) { |
| if (of_device_is_compatible(np, "simple-framebuffer")) |
| of_platform_device_create(np, NULL, NULL); |
| } |
| } |
| |
| return 0; |
| } |
| |
| fs_initcall(simplefb_init); |
| |
| MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>"); |
| MODULE_DESCRIPTION("Simple framebuffer driver"); |
| MODULE_LICENSE("GPL v2"); |