| /* |
| * OHCI HCD (Host Controller Driver) for USB. |
| * |
| * TI DA8xx (OMAP-L1x) Bus Glue |
| * |
| * Derived from: ohci-omap.c and ohci-s3c2410.c |
| * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_data/usb-davinci.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <asm/unaligned.h> |
| |
| #include "ohci.h" |
| |
| #define DRIVER_DESC "DA8XX" |
| #define DRV_NAME "ohci-da8xx" |
| |
| static struct hc_driver __read_mostly ohci_da8xx_hc_driver; |
| |
| static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, |
| u16 wValue, u16 wIndex, char *buf, u16 wLength); |
| static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); |
| |
| struct da8xx_ohci_hcd { |
| struct usb_hcd *hcd; |
| struct clk *usb11_clk; |
| struct phy *usb11_phy; |
| struct regulator *vbus_reg; |
| struct notifier_block nb; |
| unsigned int reg_enabled; |
| }; |
| |
| #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) |
| |
| /* Over-current indicator change bitmask */ |
| static volatile u16 ocic_mask; |
| |
| static int ohci_da8xx_enable(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| int ret; |
| |
| ret = clk_prepare_enable(da8xx_ohci->usb11_clk); |
| if (ret) |
| return ret; |
| |
| ret = phy_init(da8xx_ohci->usb11_phy); |
| if (ret) |
| goto err_phy_init; |
| |
| ret = phy_power_on(da8xx_ohci->usb11_phy); |
| if (ret) |
| goto err_phy_power_on; |
| |
| return 0; |
| |
| err_phy_power_on: |
| phy_exit(da8xx_ohci->usb11_phy); |
| err_phy_init: |
| clk_disable_unprepare(da8xx_ohci->usb11_clk); |
| |
| return ret; |
| } |
| |
| static void ohci_da8xx_disable(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| |
| phy_power_off(da8xx_ohci->usb11_phy); |
| phy_exit(da8xx_ohci->usb11_phy); |
| clk_disable_unprepare(da8xx_ohci->usb11_clk); |
| } |
| |
| static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| int ret; |
| |
| if (hub && hub->set_power) |
| return hub->set_power(1, on); |
| |
| if (!da8xx_ohci->vbus_reg) |
| return 0; |
| |
| if (on && !da8xx_ohci->reg_enabled) { |
| ret = regulator_enable(da8xx_ohci->vbus_reg); |
| if (ret) { |
| dev_err(dev, "Failed to enable regulator: %d\n", ret); |
| return ret; |
| } |
| da8xx_ohci->reg_enabled = 1; |
| |
| } else if (!on && da8xx_ohci->reg_enabled) { |
| ret = regulator_disable(da8xx_ohci->vbus_reg); |
| if (ret) { |
| dev_err(dev, "Failed to disable regulator: %d\n", ret); |
| return ret; |
| } |
| da8xx_ohci->reg_enabled = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int ohci_da8xx_get_power(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| |
| if (hub && hub->get_power) |
| return hub->get_power(1); |
| |
| if (da8xx_ohci->vbus_reg) |
| return regulator_is_enabled(da8xx_ohci->vbus_reg); |
| |
| return 1; |
| } |
| |
| static int ohci_da8xx_get_oci(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| unsigned int flags; |
| int ret; |
| |
| if (hub && hub->get_oci) |
| return hub->get_oci(1); |
| |
| if (!da8xx_ohci->vbus_reg) |
| return 0; |
| |
| ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); |
| if (ret) |
| return ret; |
| |
| if (flags & REGULATOR_ERROR_OVER_CURRENT) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| |
| if (hub && hub->set_power) |
| return 1; |
| |
| if (da8xx_ohci->vbus_reg) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int ohci_da8xx_has_oci(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| |
| if (hub && hub->get_oci) |
| return 1; |
| |
| if (da8xx_ohci->vbus_reg) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) |
| { |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| |
| if (hub && hub->potpgt) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Handle the port over-current indicator change. |
| */ |
| static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, |
| unsigned port) |
| { |
| ocic_mask |= 1 << port; |
| |
| /* Once over-current is detected, the port needs to be powered down */ |
| if (hub->get_oci(port) > 0) |
| hub->set_power(port, 0); |
| } |
| |
| static int ohci_da8xx_regulator_event(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = |
| container_of(nb, struct da8xx_ohci_hcd, nb); |
| |
| if (event & REGULATOR_EVENT_OVER_CURRENT) { |
| ocic_mask |= 1 << 1; |
| ohci_da8xx_set_power(da8xx_ohci->hcd, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int ohci_da8xx_register_notify(struct usb_hcd *hcd) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| int ret = 0; |
| |
| if (hub && hub->ocic_notify) { |
| ret = hub->ocic_notify(ohci_da8xx_ocic_handler); |
| } else if (da8xx_ohci->vbus_reg) { |
| da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; |
| ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, |
| &da8xx_ohci->nb); |
| } |
| |
| if (ret) |
| dev_err(dev, "Failed to register notifier: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) |
| { |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| |
| if (hub && hub->ocic_notify) |
| hub->ocic_notify(NULL); |
| } |
| |
| static int ohci_da8xx_reset(struct usb_hcd *hcd) |
| { |
| struct device *dev = hcd->self.controller; |
| struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| int result; |
| u32 rh_a; |
| |
| dev_dbg(dev, "starting USB controller\n"); |
| |
| result = ohci_da8xx_enable(hcd); |
| if (result < 0) |
| return result; |
| |
| /* |
| * DA8xx only have 1 port connected to the pins but the HC root hub |
| * register A reports 2 ports, thus we'll have to override it... |
| */ |
| ohci->num_ports = 1; |
| |
| result = ohci_setup(hcd); |
| if (result < 0) { |
| ohci_da8xx_disable(hcd); |
| return result; |
| } |
| |
| /* |
| * Since we're providing a board-specific root hub port power control |
| * and over-current reporting, we have to override the HC root hub A |
| * register's default value, so that ohci_hub_control() could return |
| * the correct hub descriptor... |
| */ |
| rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); |
| if (ohci_da8xx_has_set_power(hcd)) { |
| rh_a &= ~RH_A_NPS; |
| rh_a |= RH_A_PSM; |
| } |
| if (ohci_da8xx_has_oci(hcd)) { |
| rh_a &= ~RH_A_NOCP; |
| rh_a |= RH_A_OCPM; |
| } |
| if (ohci_da8xx_has_potpgt(hcd)) { |
| rh_a &= ~RH_A_POTPGT; |
| rh_a |= hub->potpgt << 24; |
| } |
| ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); |
| |
| return result; |
| } |
| |
| /* |
| * Update the status data from the hub with the over-current indicator change. |
| */ |
| static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| int length = orig_ohci_hub_status_data(hcd, buf); |
| |
| /* See if we have OCIC bit set on port 1 */ |
| if (ocic_mask & (1 << 1)) { |
| dev_dbg(hcd->self.controller, "over-current indicator change " |
| "on port 1\n"); |
| |
| if (!length) |
| length = 1; |
| |
| buf[0] |= 1 << 1; |
| } |
| return length; |
| } |
| |
| /* |
| * Look at the control requests to the root hub and see if we need to override. |
| */ |
| static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, |
| u16 wIndex, char *buf, u16 wLength) |
| { |
| struct device *dev = hcd->self.controller; |
| int temp; |
| |
| switch (typeReq) { |
| case GetPortStatus: |
| /* Check the port number */ |
| if (wIndex != 1) |
| break; |
| |
| dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); |
| |
| temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); |
| |
| /* The port power status (PPS) bit defaults to 1 */ |
| if (!ohci_da8xx_get_power(hcd)) |
| temp &= ~RH_PS_PPS; |
| |
| /* The port over-current indicator (POCI) bit is always 0 */ |
| if (ohci_da8xx_get_oci(hcd) > 0) |
| temp |= RH_PS_POCI; |
| |
| /* The over-current indicator change (OCIC) bit is 0 too */ |
| if (ocic_mask & (1 << wIndex)) |
| temp |= RH_PS_OCIC; |
| |
| put_unaligned(cpu_to_le32(temp), (__le32 *)buf); |
| return 0; |
| case SetPortFeature: |
| temp = 1; |
| goto check_port; |
| case ClearPortFeature: |
| temp = 0; |
| |
| check_port: |
| /* Check the port number */ |
| if (wIndex != 1) |
| break; |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_POWER: |
| dev_dbg(dev, "%sPortFeature(%u): %s\n", |
| temp ? "Set" : "Clear", wIndex, "POWER"); |
| |
| return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| dev_dbg(dev, "%sPortFeature(%u): %s\n", |
| temp ? "Set" : "Clear", wIndex, |
| "C_OVER_CURRENT"); |
| |
| if (temp) |
| ocic_mask |= 1 << wIndex; |
| else |
| ocic_mask &= ~(1 << wIndex); |
| return 0; |
| } |
| } |
| |
| return orig_ohci_hub_control(hcd, typeReq, wValue, |
| wIndex, buf, wLength); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| #ifdef CONFIG_OF |
| static const struct of_device_id da8xx_ohci_ids[] = { |
| { .compatible = "ti,da830-ohci" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); |
| #endif |
| |
| static int ohci_da8xx_probe(struct platform_device *pdev) |
| { |
| struct da8xx_ohci_hcd *da8xx_ohci; |
| struct usb_hcd *hcd; |
| struct resource *mem; |
| int error, irq; |
| hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, |
| dev_name(&pdev->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| da8xx_ohci = to_da8xx_ohci(hcd); |
| da8xx_ohci->hcd = hcd; |
| |
| da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11"); |
| if (IS_ERR(da8xx_ohci->usb11_clk)) { |
| error = PTR_ERR(da8xx_ohci->usb11_clk); |
| if (error != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "Failed to get clock.\n"); |
| goto err; |
| } |
| |
| da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); |
| if (IS_ERR(da8xx_ohci->usb11_phy)) { |
| error = PTR_ERR(da8xx_ohci->usb11_phy); |
| if (error != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "Failed to get phy.\n"); |
| goto err; |
| } |
| |
| da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); |
| if (IS_ERR(da8xx_ohci->vbus_reg)) { |
| error = PTR_ERR(da8xx_ohci->vbus_reg); |
| if (error == -ENODEV) { |
| da8xx_ohci->vbus_reg = NULL; |
| } else if (error == -EPROBE_DEFER) { |
| goto err; |
| } else { |
| dev_err(&pdev->dev, "Failed to get regulator\n"); |
| goto err; |
| } |
| } |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| hcd->regs = devm_ioremap_resource(&pdev->dev, mem); |
| if (IS_ERR(hcd->regs)) { |
| error = PTR_ERR(hcd->regs); |
| goto err; |
| } |
| hcd->rsrc_start = mem->start; |
| hcd->rsrc_len = resource_size(mem); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| error = -ENODEV; |
| goto err; |
| } |
| |
| error = usb_add_hcd(hcd, irq, 0); |
| if (error) |
| goto err; |
| |
| device_wakeup_enable(hcd->self.controller); |
| |
| error = ohci_da8xx_register_notify(hcd); |
| if (error) |
| goto err_remove_hcd; |
| |
| return 0; |
| |
| err_remove_hcd: |
| usb_remove_hcd(hcd); |
| err: |
| usb_put_hcd(hcd); |
| return error; |
| } |
| |
| static int ohci_da8xx_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| ohci_da8xx_unregister_notify(hcd); |
| usb_remove_hcd(hcd); |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ohci_da8xx_suspend(struct platform_device *pdev, |
| pm_message_t message) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| bool do_wakeup = device_may_wakeup(&pdev->dev); |
| int ret; |
| |
| |
| if (time_before(jiffies, ohci->next_statechange)) |
| msleep(5); |
| ohci->next_statechange = jiffies; |
| |
| ret = ohci_suspend(hcd, do_wakeup); |
| if (ret) |
| return ret; |
| |
| ohci_da8xx_disable(hcd); |
| hcd->state = HC_STATE_SUSPENDED; |
| |
| return ret; |
| } |
| |
| static int ohci_da8xx_resume(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| int ret; |
| |
| if (time_before(jiffies, ohci->next_statechange)) |
| msleep(5); |
| ohci->next_statechange = jiffies; |
| |
| ret = ohci_da8xx_enable(hcd); |
| if (ret) |
| return ret; |
| |
| ohci_resume(hcd, false); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct ohci_driver_overrides da8xx_overrides __initconst = { |
| .reset = ohci_da8xx_reset, |
| .extra_priv_size = sizeof(struct da8xx_ohci_hcd), |
| }; |
| |
| /* |
| * Driver definition to register with platform structure. |
| */ |
| static struct platform_driver ohci_hcd_da8xx_driver = { |
| .probe = ohci_da8xx_probe, |
| .remove = ohci_da8xx_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| #ifdef CONFIG_PM |
| .suspend = ohci_da8xx_suspend, |
| .resume = ohci_da8xx_resume, |
| #endif |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = of_match_ptr(da8xx_ohci_ids), |
| }, |
| }; |
| |
| static int __init ohci_da8xx_init(void) |
| { |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); |
| ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); |
| |
| /* |
| * The Davinci da8xx HW has some unusual quirks, which require |
| * da8xx-specific workarounds. We override certain hc_driver |
| * functions here to achieve that. We explicitly do not enhance |
| * ohci_driver_overrides to allow this more easily, since this |
| * is an unusual case, and we don't want to encourage others to |
| * override these functions by making it too easy. |
| */ |
| |
| orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; |
| orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; |
| |
| ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; |
| ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; |
| |
| return platform_driver_register(&ohci_hcd_da8xx_driver); |
| } |
| module_init(ohci_da8xx_init); |
| |
| static void __exit ohci_da8xx_exit(void) |
| { |
| platform_driver_unregister(&ohci_hcd_da8xx_driver); |
| } |
| module_exit(ohci_da8xx_exit); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRV_NAME); |